This commit introduces minimal support for instrumentation within Qt.
Currently, only LTTNG/Linux and ETW/Windows are supported.
Change-Id: I59b48cf83acf5532a998bb493e6379e9177e14c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When QFile::open is called with the NewOnly flag, the call will
fail if the file already exists. As usual, if the file does not exist,
it will be created. Like QTemporaryFile, there is a guarantee from
the operating system that you are not accidentally creating a new file
on top of an older file. When QFile::open is called with the
ExistingOnly flag, the call will fail if the file does not exist. The
ExistingOnly flag only provides new functionality when used with the
WriteOnly flag. For ReadOnly it provides no change in functionality,
as ReadOnly by itself already never creates.
Task-number: QTBUG-52244
Change-Id: I8e3206728f245f95172c225bf297023fb078fc6d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
otherwise the project would need to clear QT despite using
qtHaveModule() in requires() (or REQUIRES=).
Task-number: QTBUG-65106
Change-Id: I568202214c8eafcdbe2d0e253b18f0e171293aff
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Old header.LGPL21 header was used at some files. Replase those with
new header.LGPL one
Remove old header.LGPL21
Task-number: QTBUG-57147
Change-Id: I650e39024ed4876bba27e954c7d61fdb025b46ef
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This ensures that the same set of variables can be successfully replaced
in both the Makefile and Xcode generators. It also switches the default
templates to use the Xcode-style ${var} syntax instead of the @var@
syntax for better Info.plist compatibility across generators.
Change-Id: Iff330bafd152773aafac9143c4a34e34f92f0ce6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Since Xcode 6.3, this must be set to NO because stripping on copy is no
longer fully supported due to the potential of input binaries being code
signed. In this case Xcode will simply ignore the strip step and issue
a warning since stripping would invalidate the code signature. This
change silences that annoying warning for release builds. Also, the
setting assignment is moved from being hardcoded in the generator, to
a QMAKE_MAC_XCODE_SETTINGS value.
Change-Id: If25511edddc12b7b0407e2992d80884b7d6437dc
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Common changes to mingw-w64, ICC on Windows, and MSVC toolchains:
- set similar order of variables and its splitting into sections,
- set similar order of flags in variables and the way they are set.
mingw-w64 toolchain:
- move 'gcc-base.conf' include before setting Windows specific
flags, similar to include 'msvc-desktop.conf' in ICC on Windows
toolchain; this leads to consistency with other toolchains
and allows to safely override common GCC variables with Windows
specific ones, when needed,
- move 'QMAKE_EXT_OBJ' and 'QMAKE_EXT_RES' variables to the linker
flags section, according to its purpose.
MSVC toolchain:
- set flags order in 'CONFIG' variable, similar to mingw-w64 toolchain.
Change-Id: I417cc8f7959c669dd504f2c5c11eb879a7989bd4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
mingw-w64 toolchain:
- remove 'QMAKE_CXXFLAGS_THREAD' variable definition, since
'QMAKE_CFLAGS_THREAD' variable not set for mingw-w64 toolchain.
ICC on Windows toolchain:
- remove 'QMAKE_LFLAGS', 'QMAKE_LFLAGS_RELEASE',
'QMAKE_LFLAGS_RELEASE_WITH_DEBUGINFO' and 'QMAKE_LFLAGS_DEBUG'
definitions, since they're properly set in 'msvc-desktop.conf',
- remove 'DSP_EXTENSION' variable, which doesn't occur anywhere else
within QtBase; its most recent search results relate to
Visual Studio 6.0 and Intel Fortran.
Change-Id: I2ce5c2c9e9ca2c09c1acfcf8c60381d318e8e380
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If the linker supports it, add the gdb index to the debug symbols, which
makes loading gdb on Qt libraries much faster.
Change-Id: I2ed201c22913b97ac2efaefb5e31636e795ae102
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This works around the inability to build iOS apps for a "generic"
simulator by explicitly setting the Xcode build setting
ENABLE_ONLY_ACTIVE_RESOURCES to NO in order to ensure that all variants
of assets in an asset catalog are built when targeting iOS simulator
devices. Otherwise, we will simply build for whatever the first
simulator in the list happens to be. If the application is then deployed
to a different simulator, some of the assets needed for that device
variant may be missing.
This "helps" QTCREATORBUG-19447 but is not a workaround since this fix
is necessary for command line builds anyways, even though it's unlikely
to crop up in practice there, since one would have to manually deploy
the built application bundle to the simulator using simctl rather than
going through Xcode (which would rebuild for the appropriate device).
Change-Id: Ia41c48dcc715fe79a2c50db66a0ca7a1fea159c2
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... instead of only toolchain.prf.
the license check could go haywire, and everything else that file does
is meaningless in configure context anyway.
Task-number: QTBUG-63452
Change-Id: I5e31c87fe717fda40978c0317556070637e537e2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
otherwise test de-duplication between modules doesn't work.
Change-Id: I2c6222d853108df223758aa8907dc8d004efd87f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
especially during debugging, it is often necessary to re-run only one
(or a few) tests, where -recheck-all would be wasteful.
Task-number: QTBUG-64059
Change-Id: I9410894dec4289ff832d7f75e04f9b60fe76c57c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Enable xcb QPA plugin when XQuartz is available. This is done
in a single build, alongside the Cocoa version.
We delegate part of the configuration stage to pkg-config, so
this becomes a requirement. Ensure that
PKG_CONFIG_PATH=/opt/X11/lib/pkgconfig:/opt/X11/share/pkgconfig
is in your environment, or pkg-config is properly set up.
Tested with the following configure options:
configure \
-pkg-config \
-fontconfig -system-freetype \
-system-xcb -xkb -no-opengl \
-qt-xkbcommon -qt-xkbcommon-x11
Change-Id: I2eb5a0491172368afc4c629c540cbef08580348d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
it could be somewhat surprising that specifying variant-specific libs
would not clear the common libs, so do that. of course, the default
for the common libs could theoretically contain common deps of the
variant-specific libs, in which case clearing them would be surprising
in turn - luckily, we have no such case.
Change-Id: Ifca08b9e1949c6a0cefed6931ade4021927d7c90
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... and not only when the source explicitly specifies build variants.
Change-Id: Iac6c8fda8f431d5fb50fada8338d1b660ab040d7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
unlike for the other fields, we forgot to eval() the values of the
build-specific library values, leading to over-quoting of values which
require any quoting at all.
amends c0cc50520.
Task-number: QTBUG-62521
Change-Id: I4dfce31040dd09248d3f9dd4294f7fb147c13bdd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
qtConfLibrary_inline() used to set $${1}.builds.$${b}.libs, while
everything else assumed no such .libs suffix. fix the former.
amends 9172143f52.
Task-number: QTBUG-61431
Started-by: Konstantin Ritt <ritt.ks@gmail.com>
Change-Id: I0bd81591c46266d81baa9c12315411183bbc7a63
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It seems the compiler supports /arch:AVX512 and /arch:AVX512F but none
of the other switches (and neither are documented). And when you pass
those, you also get Conflict Detection (CD), Double & Quad (DQ), Byte &
Word (BW) and Vector Length (VL), which matches the ICC switch
"-xCORE-AVX512". Unlike ICC, there doesn't seem to be an option to
enable only the common part of AVX-512.
Support for Intel Xeon Phi's current features (Exponential &
Reciprocation and Prefetch) and future ones (IFMA, VBMI, 4FMAPS, 4VNNI
and VPOPCNTDQ) seems to be missing altogether.
See https://blogs.msdn.microsoft.com/vcblog/2017/07/11/microsoft-visual-studio-2017-supports-intel-avx-512/
Change-Id: I98105cd9616b8097957db680d73eb1f86e487e6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Common changes to mingw-w64, ICC on Windows and MSVC toolchains:
- update toolchains description similar to 'gcc-base.conf'.
Change-Id: Ie456c6cec86c0d1c0107ca84a0fa7855666df91e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For source packages that don't have a .git subdirectory, syncqt is
executed before configure, with outdir set to srcdir, and this
caused path misalignments for injected headers in qt_module.prf
when generating makefile rules.
The fix is to change syncqt to always output injected header
paths relative to the source dir.
Task-number: QTBUG-64539
Change-Id: Ia2296e44494093dbf124729062f430ad6fca7262
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This fixes an issue where a build error may be introduced by a simulator
being selected whose OS version is lower than the application's
minimum deployment target.
Task-number: QTBUG-64456
Change-Id: Ic7c834a1473c183ebb910bc01a416fe1e23a5a14
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We want to know when a plugin uses deprecated Qt APIs, especially
deprecations in the QPA APIs, which today is not the case, so
platform plugins have no idea that they should transition.
Change-Id: If9d3d95dc6f1f4178b103f177c9eb8326767ffab
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Xcode 9 introduced the main thread checker, which detects invalid
use of AppKit, UIKit, and other APIs from background threads.
https://developer.apple.com/documentation/code_diagnostics/main_thread_checker
In our case these are accesses to e.g. [UIView layer] and
[UIScreen scaleFactor] from the render thread of QtQuick,
things we should look at, but that might not be easily solvable.
In any case, these are not warnings the user can do anything about,
so in lack of a per-library disable of the checker, we have to
globally disable it for the whole Xcode project.
Task-number: QTBUG-63822
Change-Id: Ibfcdf23891cf6bfbbc9b9b3349e4c256c273c7de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Bundle data source files which don't exist at qmake time need to be
handled specially. This also required splitting the generated list of
public headers, as was already done for private ones.
Task-number: QTBUG-60413
Change-Id: I97acfa88622da6b73839b8f976f73ace3cb10223
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This warning used to be part of -Wconversion, but that generates too
more noise than we're willing to fix now (like conversion from qint64 to
int). The float conversion does trigger for conversion from double to
float, as shown in all the QVectorND uses of float, but more
importantly, it triggers on passing floats to ints.
Change-Id: I69f37f9304f24709a823fffd14e69cfd33f75988
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
