In gui's CMakeLists.txt we have
if (NOT ANDROID)
...
add_qt_simd_part(Gui SIMD neon SOURCES ...)
...
endif()
and later
if(UNIX AND NOT ANDROID AND NOT APPLE_UIKIT AND NOT INTEGRITY AND NOT (TEST_architecture_arch STREQUAL "arm64"))
add_qt_simd_part(Gui SIMD neon
endif()
Since add_qt_simd_part internally uses an OBJECT library to compile the
sources with different flags and then link into Gui (in this case), we
may end up with an error when add_qt_simd_part is called twice for neon,
because the constructed target (Gui_simd_neon) exists already.
We can re-use an existing target though, as the SIMD features is the
same.
Change-Id: I7a21c6e66b47e918a53fa3b1a7db9e053ecc8d87
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Every time the qtbase project was reconfigured, the list of
config tests results was appended to a cache variable which was
never reset, resulting in multiple copies of the same values
being written to QtBuildInternalsExtra.cmake.
Make sure to clean the cache variable before appending to it.
Also change the variable to be all upper-case, to be consistent
with other cache variables.
Change-Id: Ic12046730a080595e19377981a726bc330641dc1
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A developer can pass either -DQT_NO_MAKE_TESTS=ON or
-DQT_NO_MAKE_EXAMPLES=ON to exclude tests or examples from being built
as part the default make target (when you write just make or ninja).
With ninja, tests and examples can be built separately one by one,
by typing
$ ninja tst_foo
or
$ ninja example_bar
Same can be done with the Makefile generator.
$ make tst_foo
All tests / examples can be built in one go by typing
$ ninja tests/all
or
$ ninja examples/all
With the Makefile generator unfortunately it's not as nice and is most
likely an implementation detail, but it can still be done by running
something like
$ make -f CMakeFiles/Makefile2 tests/all
or
$ make -f CMakeFiles/Makefile2 examples/all
Change-Id: I34f168b3ab41e952a21d3ace5634e25a9f41922e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Previously repo/tests/CMakeLists.txt was a standalone project on which
CMake could be called. This was useful for Coin to be able to build
and package only tests, but was a bit troublesome because that means
having to specify the usual boilerplate like minimum CMake version,
which packages to find in every tests.pro project.
Instead of having a separate standalone project, modify the top level
project and associated CMake code to allow passing a special
QT_BUILD_STANDALONE_TESTS variable, which causes the top level project
to build only tests, and find Qt in the previously installed qt
location.
This also means that when building a repo, we generate a
${repo_name}TestsConfig.cmake file which does find_package on all the
modules that have been built as part of that repo. So that when
standalone tests bare built for that repo, the modules are
automatically found.
qt_set_up_standalone_tests_build() is modified to be a no-op because
it is not needed anymore. Its usage should be removed from all the
other repos, and then removed from qtbase.
Non-adjusted tests/CMakeLists.txt projects in other repositories
should still be buildable with the current code, until they are updated
to the new format.
Adjust the Coin build instructions to build the standalone tests in a
separate directory.
Adjust pro2cmake to generate new structure for the tests/tests.pro
projects.
Adjust the qtbase tests project.
Fixes: QTBUG-79239
Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When a _nolink target is exported, instead of getting the original
namespace prefix, it gets the Qt6 prefix
(OpenSSL::OpenSSL_nolink -> Qt6::OpenSSL_nolink).
There is some special case code in Network autotests which tries
to access the former target name, which doesn't exist when building
standalone tests.
Make sure to create a Qt6:: library alias for _nolink targets during a
build (so before the library is exported), and change the Network
autotests project to use this Qt6:: namespaced library, which will
ensure it is found both in a standalone tests build and in a regular
Qt build.
Also make sure to actually call find_package to find the OpenSSL
library when building standalone tests, otherwise configuration will
fail.
Change-Id: I3da5b958e72e745a50380f8ab1644459a7c6b005
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Don't call qt_android_dependencies for interface libraries.
Also make sure not to set properties which don't start with
INTERFACE_ prefix.
Change-Id: I0afdffd34c9aebe0d7ac4731b57dd4d505f84570
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
It only makes sense for non-interface libraries.
Change-Id: I80ac942ed546a6ac866e827aa2026e4e6ac897b2
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
The reason is that interface libraries have to have properties
prefixed with INTERFACE_ and more importantly we don't set the
property for interface libraries at the moment.
Amends d1542e8a73.
Change-Id: I86bf99995278b9086fa0e3815e10d5d54d9ea4dc
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Replace condition x86 to i386 to match other platforms.
Regenerate src/gui/CMakeLists.txt
Disable SSE4 on android x86 to match qmake.
Change-Id: Ic0d330206f2d70a79d72553aa3ff0f91ff58119c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Convert benchmark executables to add_qt_benchmark().
Currently add_qt_benchmark just calls add_qt_executable() and
ensures that it they build under CMAKE_CURRENT_BUILD_DIR and do not
install.
Add QT_BUILD_BENCHMARKS option to enable/disable building of benchmarks.
Change-Id: Id0bc676698d21d50048d97d9abef51d92ccb6638
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The last set would override the variable instead of appending to it,
thus QT_DISABLE_DEPRECATED_BEFORE was never set.
Change-Id: I173b91704a855fcda1f2b86172d318e3953466db
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If we do not encounter the load(qt_plugin) statement in the .pro file
but we do see the entry CONFIG+=plugin, treat the target as a regular
CMake library instead of treating it as a qt_plugin by default.
Change-Id: I67ad5c865a1a5ab691a6b0d86c2db4b686aa04dd
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch converts all add_executable calls when building for Android
to a module library and replaces the call to add_test() to use
the android testrunner binary.
Change-Id: I10ba5919217cdc93cc2cbbb7d13ad9d10fc5ac1a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
e1fd607493 in qtbase removed the
qml1 imports enum from qlibraryinfo.cpp, qconfig.cpp, etc.
With the recent merge from dev, this was not adjusted in
qt_generate_qconfig_cpp, and thus we generated one too many strings
in qconfig.cpp, which resulted in
QLibraryInfo::location(QLibraryInfo::Qml2ImportsPath) returning
"imports" instead of "qml" subfolder, thus causing all qml modules
not being found.
Fix this by removing the extra qconfig.cpp entry, and all other
references to the location.
Change-Id: I128f667281138e2e0ef0fe1ced4af0405c532fef
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch adds two custom targets to generate android apks. The
targets are named ${TARGET}_prepare_apk_dir and ${TARGET}_make_apk. The
first one insures the binary is copied to the right location and the
latter invokes androiddeployqt on the apk directory.
Change-Id: I8152cef387b50ec03ee2bfd92b56910a6f22754c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use STRING type for install locations as we use them relative to the
CMAKE_INSTALL_PREFIX.
PATH type will get expanded to absolute paths by newer CMake versions,
so that breaks our logic.
Change-Id: I36be1f0378c4fb07ad8db0051d540f9d243000be
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Write out a file with some JSON data to describe a module.
This file contains information on how that module has been built.
Change-Id: I8a604692663cbb7b76b96b97124130e30b822e4b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Allow plugins to be built with undefined symbols when
ALLOW_UNDEFINED_SYMBOLS is specified.
Change-Id: I6bc809e3e5257302157bf8484f850d8319674a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Rename the builtin test data resource name to something more unique as
there are name clashes when building tests which also add a resource
named 'testdata'.
Change-Id: Icc1bbff3134e1dbc6ea4f6a87a1715b936c723cc
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add support to pro2cmake to convert java code for android.
Add support to override API_LEVEL for the Android sdk jar file. If the
sdk is not found, we'll default to the one located by QT_ANDROID_JAR.
Change-Id: If0b746dc7f9148ac43e6592a4a4dd23d46bbd4cd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This maps the behavior of mkspecs/features/qt_common.prf and enables the
use of C++17 for example in Android, where the toolchain supports it
anyway.
Change-Id: I41f4bdb160a3929e2fb78f36efb1ad5f2ad391a5
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We cannot use a generator expression in an if statement, it does not
work. Instead, we could inspect the CMAKE_C/CXX_COMPILE_FEATURES list,
but unfortunately that's not reliable. For example it detects that ICPC
supports C++17 when in fact that depends on the installed libstdc++.
Therefore this patch revives our own configure tests.
Change-Id: Ic3bc5762fbe81837722523e3881ac16e84628519
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Latest CMake will try to compile the given precompiled headers
as C files, due to enabling the C language in the project + also
having c files.
Make sure to wrap the precompiled headers in a CXX language only
generator expression.
For details, see https://gitlab.kitware.com/cmake/cmake/issues/19839
Change-Id: Ib3508ad920092455c300b1a566ba6152bab032db
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In the plugin test in QtBase we have a scenario where we have target
binaries that are inputs to add_qt_resource(). If we do not remove these
files from the dependency list for add_custom_command() cmake will
fail to generate the build files.
If we mark them as generated source files, we'd have to add a special
rule to generate them. Furthermore, using $<TARGET_FILE:...> does not
work due processing done by add_qt_resource.
To bypass this we check whether the property is set and instead of
adding the file to the dependency list we add the target referenced
in that property. RCC will still work as expected but will fail if the
files aren't present.
Change-Id: I16855a54f5606d6fe27ab1347ed7ff4f40392c98
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
OUTPUT_DIRECTORY by itself is not a valid cmake target property.
Change-Id: Ic3a2a81b8b982ad7ccf0551000a157f9a4d3ef22
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Note the following bigger things that had to be done:
Handle GSS library / feature with a new custom find module.
Implement rudimentary support for relocatability (does not currently
handle extprefix).
Change-Id: Ic6cd27dda7ebca9829f51cb42ea76fff6d1767ef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If a module is marked as NO_MODULE_HEADERS, we shouldn't
try to include the non-existing include directory which is
usually generated by syncqt.
Note it seems that NO_SYNC_QT and NO_MODULE_HEADERS seems
to converge, so it might make sense to merge them in the future.
Change-Id: Iab4e2907ed68776632337b37496b015535da8784
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Generated plugin CMake files should always try to call
find_dependency, especially in static builds.
pkg_check_modules sets a cache value for foo_FOUND instead of
a directory scope foo_FOUND, which means that find_dependency
will not be called in another scope, and thus fail to create
needed imported targets.
Note this makes the code be the same as in
ModuleDependencies.cmake.in.
Change-Id: I0b58b038afcb72cb27d0b433371bc9cb5e4bfec9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add condition replacements for the android ABIs.
Add a replacement for QT_ARCH to ANDROID_ABI, since QT_ARCH is only used
with the android build for now.
Change-Id: I553d7910546de32236f723ec2e9a05a18da76130
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
extend_target() does not handle the OUTPUT_DIRECTORY argument, so we
must handle it ourselves.
Change-Id: I31880a516ae185f3255b2a51f41d61ee6b1d9838
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's probably best to make it follow the usual calling convention that
the associated (consuming) target is the first parameter of the
function. So first this change accepts both formats.
Change-Id: I1f20706b23d5e819e0eb689eecedb3afb49df3b7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Provide a SKIP_INSTALL argument to add_qt_plugin for test cases with
plugins lacking install information.
Change-Id: Iddb3843fab1790d69d64686530a46057a2ff0477
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add add_cmake_library to allow us to create normal cmake targets using
all the information we have collected via the conversion script.
This function is only meant for tests. For an example,
see tests/auto/corelib/plugin/qpluginloader/lib/lib.pro.
Change-Id: I738cb8ac241b8da1a1da3ef957c24dc7a754d43f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When we run into a plugin that does not have a type and is not a
qml plugin, we try to see if we can find the target installation path
and provide INSTALL_DIRECTORY AND ARCHIVE_INSTALL_DIRECTORY to the
add_qt_plugin call.
We run into this frequently with the unit tests.
This patch also changes add_qt_plugin() to use the value provided in
INSTALL_DIRECTORY for ARCHIVE_INSTALL_DIRECTORY if no value is provided
for the latter.
Change-Id: I61278904a4d2d72308079cd362bd085b4e2f540c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QtPlugins.cmake.in uses file(GENERATE) and target_sources() to
propagate the generated cpp files which contain plugin initialization
code to their consuming targets.
Unfortunately due to a bug in CMake, if the file is generated in a
different scope than the consuming target, the CMake generation
step will fail saying that the source file can not be found.
See https://gitlab.kitware.com/cmake/cmake/issues/18399 for details.
In the case of qtdeclarative, find_package(Qt6) is called at the top
level scope (this is when the file gets generated),
but the targets are created in subdirectory scopes, and the GENERATED
source file property is not propagated across scropes.
Circumvent the issue by instead using file(WRITE) and configure_file()
which create the file at configure time rather than generate time.
This will pollute the current binary directory with some more files,
but at least successfully fixes the build.
Change-Id: I3ab3b12dcbf6a9d0ab9ee87173e4a1952325b37b
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Some work was needed to make the plug-in types,
and which plug-ins are available for each type
in client code.
Change-Id: Ib71feca31069deca3d3f54c8613054f5f8ae410c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Update add_qml_module() to use the new INSTALL_QML_FILES argument from
qt6_add_qml_module().
This patch also updates pro2cmake.py to remove the QT_QML_SOURCE_INSTALL
property from qml files.
Change-Id: I6623b2de76bb55bd6750e48f7d45c53ca536b391
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Update to match latest changes to QtDeclarative.
Change-Id: Ie455c0418e95c288149b4b1a29b065a8876e8b7e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The framework is needed for qtconnectivity.
Change-Id: I6a502564fb5543ca94ba5ae458a544286e34564c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Sometimes when writing a qt_find_package and configuring a project,
you might get the following error from CMake:
CMake Error at QtBuild.cmake (set_property)
Attempt to promote imported target "WrapFreetype::WrapFreetype" to
global scope (by setting IMPORTED_GLOBAL) which is not built in this
directory.
This means that another find_package call, found WrapFreetype
in another directory scope other than the current one, and thus the
found target cat not be made global. Sometimes that implies that the
qt_find_package might not be needed if WrapFreeType will always be
found via a transitive depdendency.
By setting QT_DEBUG_QT_FIND_PACKAGE=1 on the command line, you can
make qt_find_package skip all of its behavior if the package was
already found and the provided targets were also found.
Unfortunately this behavior can not be made the default, because there
is no way to find out in what scope the package was found, and if it's
legal to make the targets global. At least I haven't found a way to do
that yet.
Thus the opt-in QT_DEBUG_QT_FIND_PACKAGE is a means to help with
debugging such cases.
Change-Id: I04242ed0f2fd0a75bc199386d28a1a0bd92da41a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
During a static build we need to use the find modules
in 3rdparty/extra-cmake-modules/find-modules when generating a
ModuleDependencies file, so that the generated find_dependency()
calls succeed. This means that the files have to be shipped with
Qt6 package, making them pseudo public API.
There is also a need to use these files when building QtWayland.
Instead of setting / unsetting CMAKE_MODULE_PATH only in module
and plugin Dependencies cmake files, just set them once when finding
Qt6.
This will allow QtWayland and QtX11Extras to easily find the required
third party packages, without having to hardcode the paths in multiple
repos.
Change-Id: I750d0421a269e5632afa1bb62498c2501d73cdb1
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
At least on Ubuntu the name of the pkg config package
is libsystemd and not systemd.
This fixes libsystemd showing up as not found in the feature
summary.
Change-Id: I099a253026ca8096b9e2f348a5f35209d44acc6c
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Qt CMake Build Bot
If the target exists or the find_package() call succeeds
we still need to set _FOUND to 1.
Change-Id: Ib2267c30580082dcc177ab21708a3bc5dbde974f
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Qt CMake Build Bot
qt_find_package usually does 2 find_package() calls, one in CONFIG
mode and one in MODULE mode.
If the CONFIG mode doesn't find a Config file, the package_DIR cache
variable is set to NOTFOUND, and this causes the FeatureSummary
at the end to show that the package was not found, even if it is
found by the next MODULE mode find_package call.
Make sure to unset the _DIR variable in case if the Config module
call fails.
This fixes XRender showing up as not found even when it's found via
the FindXRender.cmake file.
Change-Id: I6ce39dad9cbb11836ca71f735a3267070c75b444
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Qt CMake Build Bot
