This signal is emitted by the QIODevice itself, so we don't have to
forward it from the internal socket.
Pick-to: 6.1 6.2
Change-Id: I85745f36d7a27d92f339a9184de3b6e5d46f6f34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This mechanism was neither properly designed nor correctly tested
initially on Windows.
[ChangeLog][QtNetwork][Important Behavior Changes] QLocalSocket on
Windows now implements delayed closing, which is consistent with
the behavior on Unix.
Change-Id: Ic3bc427e68eea7f18201f6129df19fbc87d68101
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
It's the user's privilege to do so when they want to finish reading the
QIODevice. Moreover, this is the only difference between close() and
disconnectFromServer().
[ChangeLog][QtNetwork][Important Behavior Changes] The Windows
implementation of QLocalSocket::disconnectFromServer() no longer calls
close(), which is consistent with the behavior on Unix.
Change-Id: Ie9ce20c60259a2b08f5254b719355bd7be9b17cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In the case where we have pending data to write, calling flush() here
may cause the device to close immediately, if the pipe writer already
got a result of the last operation from the thread pool. In this
scenario, the device does not enter the 'Closing' state, which leads
the following code to unexpectedly fail on Windows
socket.write(...);
socket.disconnectFromServer();
QVERIFY(socket.waitForDisconnected());
Removing the call to flush() makes the behavior consistent with the
implementation on Unix.
Change-Id: Ic31fbc999be979c1e5befa8f132d9fb367f472ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
According to the documentation, calling abort() should immediately
reset the socket to its initial state. This includes:
- closing the file descriptor;
- closing the QLocalSocket as an I/O device;
- canceling a pending outgoing connection, if it exist;
- reseting 'serverName' string.
So, adding a call to close() resets the state entirely.
Pick-to: 6.1 6.2
Change-Id: I9c604b5187c6300b437d7aa4c2d06db03edacf21
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Both readChannelFinished() and disconnected() signals should be emitted
after closing the pipe. Otherwise, these signals do not correspond to
the state of the socket and may even be resent, if a slot connected to
one of these signals processes events.
[ChangeLog][QtNetwork][Important Behavior Changes] QLocalSocket on
Windows now emits both readChannelFinished() and disconnected() signals
after closing the pipe and emitting stateChanged(UnconnectedState),
which is consistent with the behavior on Unix.
Pick-to: 6.2
Change-Id: I1cc551b7897fdba3cec1fd6705f5396790818c7d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The base implementation discards the data by reading into a dummy
buffer, which is slower than necessary.
Change-Id: Iabf0c4a25746af6cac5b61d7bda66d89501c808c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QIODevice::readLine() can also return partial lines, which was not
properly documented. Add an autotest for QLocalSocket to illustrate
and test this behavior.
Pick-to: 6.2
Change-Id: Ia2c1c438cc68d2672d34881e11fdf7837232f3b4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The 'pipeBroken' flag must be updated before emitting the readyRead()
signal to avoid deadlock of waitForReadyRead() inside slot connected
to readyRead().
Change-Id: Ie393fdd594c6691da6609ea18307589b7157c624
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Takes advantage of Linux's and Android's support for abstract namespace
when binding sockets, which is independent of the filesystem (see man
entry for unix domain sockets).
To make QLocalServer and QLocalSocket use an abstract socket address,
one needs to set the socket options to QLocalServer::AbstractNamespaceOption.
Fixes: QTBUG-16090
Change-Id: Ia9f9c9cc1ac5c28f9d44b0a48d854a7cfbd39b11
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution, but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I66443c3021d6ba98639a214c3e768be97d2cf14b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This patch marks some functions "override" to silence the corresponding
warning.
Change-Id: I88ccc5fa7521ecccc84a6cba9f06ea185cc5679e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This reverts commit ee122077b0.
Reason for revert: This causes QProcess::readAll() to sometimes
return nothing after the process has ended.
Fixes: QTBUG-88624
Change-Id: I34fa27ae7fb38cc7c3a1e8eb2fdae2a5775584c2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
(cherry picked from commit 23100ee61e33680d20f934dcbc96b57e8da29bf9)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution , but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I1cd87c07db39f3b46a2683ce236d7eb67b5be549
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When a peer closes the connection, the device remains opened for reading
purposes. However, we should disable writing on disconnected socket.
Otherwise, if the user issues a write() call, a new pipe writer object
will be created and the write call occurs with invalid handle value.
Pick-to: 5.15
Change-Id: Id136798c7663df1fce7ed0aa4e3c6f5c65218a11
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
This reverts commit 0de6c26ac1.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I67dbb5cada25da473bdd02e71b1e2d9bd03f039e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QLocalSocket::error is overloaded as a signal and an accessor (for the
error reported by the signal). This means connecting to the signal using
a pointer to member function would require ambiguity resolution. We
deprecate the old accessor (to be removed in Qt 6) and introduce a new one -
'socketError'.
[ChangeLog][Deprecation Notice] QLocalSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Iab346f7b4cd1024dee9e5ef71b4b7e09f6d95b12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is needed to make sure the output directory is in the correct
place somewhere under tests, rather than in $prefix/bin.
Change-Id: I98afa9c0a7517a8a10866b4c626bd4c4d2fd214f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
on macOS, the test seems to be stable nowadays.
Task-number: QTBUG-39986
Change-Id: I18430c3feb27a5bee5474e1eb95f7d89b25f00a9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replace with QSignalSpy or QTRY_COMPARE when possible.
Task-number: QTBUG-63992
Change-Id: I18dc8837301424855487a12ee62451a5aeb21bf0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
To read data from a named pipe, QWindowsPipeReader uses the ReadFileEx()
function which runs asynchronously. When reading is completed and the
thread is in an alertable wait state, the notified() callback is called
by the system, reporting a completion status of that operation. Then the
callback queues a readyRead signal and starts a new sequence. The latter
is skipped if the pipe is broken or the read buffer is full.
Thus, if an application does not run the event loop, the next call to
QWindowsPipeReader::waitForReadyRead() should emit the queued signal
and report true to the caller even if no new read operation was started.
Change-Id: I37102dbb1c00191d93365bfc2e94e743d9f3962a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Otherwise the ::debug() test fails when a build does not print qDebug()
messages.
Change-Id: I3f3c4b3c7d74004abe5ed8d7ac52164d4f88ef1f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The stdout of the processes used in the test was dumped if there was an error,
but the processes write their error messages to stderr.
Use MergedChannels process channel mode to dump both output streams.
Change-Id: I1645fd31c394da0871ee6ae36d37ca9a04d86052
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The test's client processes are prepared for the server not being ready when
they try to connect and handle QLocalSocket::ServerNotFoundError by waiting and
trying again.
However, on Ubuntu 16.04 and 17.10 and possibly other systems, sometimes the
error returned by qt_safe_connect inside QLocalSocket is ECONNREFUSED instead of
ENOENT. This has caused flaky failures in CI, so wait and try again in the case
of QLocalSocket::ConnectionRefusedError also.
Task-number: QTBUG-66679
Task-number: QTBUG-66216
Change-Id: I61e3d5b052d84c5ba9d1746f2c71db37cedbf925
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Adds a function to return the native socket descriptor. It allows
threaded or forked applications to reuse a previously created socket.
[ChangeLog][QtNetwork][QLocalServer] Added a function to retrieve
the socket descriptor.
Task-number: QTBUG-55043
Change-Id: I556e97000d2c02ad2bdd636984de6c7564381c6a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the user calls QLocalSocket::setReadBufferSize() with a value less
than the current size of the pipe buffer, startAsyncRead() would call
ReadFileEx() with invalid parameters:
ReadFileEx(handle, nullptr, some_big_value, ...);
Change-Id: I3d153e3ec34f8038dc001c1c896aeceb666a8979
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
../tst_qfile.cpp: In member function 'void tst_QFile::handle()':
../tst_qfile.cpp:2661:38: warning: ignoring return value of 'ssize_t read(int, void*, size_t)', declared with attribute warn_unused_result [-Wunused-result]
tst_qstatictext.cpp:862:58: warning: unused parameter 'textItem' [-Wunused-parameter]
../tst_qtcpsocket.cpp: In member function 'void tst_QTcpSocket::abortiveClose()':
../tst_qtcpsocket.cpp:2254:90: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Test.cpp: In member function 'void My4Socket::read()':
Test.cpp:66:20: warning: 'reply' may be used uninitialized in this function [-Wmaybe-uninitialized]
../tst_qlocalsocket.cpp: In lambda function:
../tst_qlocalsocket.cpp:701:51: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
../tst_qtcpserver.cpp: In member function 'void tst_QTcpServer::linkLocal()':
../tst_qtcpserver.cpp:935:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
../tst_qtcpserver.cpp:940:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Change-Id: Ic315069768bcb63a6b333c28ac65b0b992b0d43f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
