Some of the transition constructors didn't call the maybeRegister()
function, causing the transitions to be ignored if they were created
when the state machine was running and the transition's source state
was active.
Added tests that cover all possible cases.
Change-Id: If1b593b127bd719e3be4e5a2e6949a780c4e97c3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
The originalSignalIndex member was not set if the signature had to be
normalized. This caused the SignalEvent passed to onTransition() to
report a signal index of -1.
Improve the signal transition tests so they check both the event
passed to eventTest() and onTransition().
Change-Id: I5331fd1944d53310b6d11eb2fd8713b80faa53a1
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Use the same trick as used for private signals in the models.
Change-Id: I4235788490cae0e3d554565621d145652dc5b0ca
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The private signals can not be used as function pointers, as
required by the new syntax, so we introduce a parameter which
can only be created privately.
Change-Id: I3d7bb8a163e764d685e8007cba831fb77e3c6855
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Moc checks for the use of the QPrivateSignal struct, which is part of
the Q_OBJECT macro and is private to each class that uses it. Moc then
generates a name of the signal which does not include the private
struct, and generates code to invoke such signals with an instance of
the private struct.
This way we can mark private signals as such and prevent them from
being emitted from subclasses or from outside of the class entirely.
The drawback to this is that it only works if the private
signal has no default arguments. However, at least in Qt, there are
no such signals.
Change-Id: Id16eadaa8d3c36a2c3b265077877f3e1d8304c84
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Type traits can not be changed durring Qt5 life time.
Change-Id: If69f65ff2113c901580afee91b11ae1b11c13a4f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Replace a list of QFuture<void>s and a loop that calls waitForFinished()
on each of them with a QFutureSynchronizer<void>, which does exactly that.
Change-Id: I1f2e90169a5b2949bd8cb9d1009a5a7af1500139
Reviewed-by: David Faure <faure@kde.org>
The SCXML spec had a bug that would cause the initial state of a
compound state within a parallel state group to be entered even if
the transition specified another (non-initial) state of the compound
state as its target. This only happened if the transition had
multiple target states.
The bug has been fixed in recent revisions of the SCXML spec. This
commit implements the fix, which is to walk the ancestors of the
transition's target states only after all the target states
themselves have been added, so that the default initial states are
correctly overridden/ignored.
Task-number: QTBUG-25958
Change-Id: Iac532047678c483a4a3996e24dacf30e00f6bbe0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Remember to register the metatype where we use it, so we don't depend
on another test being run previously.
And skip the setWorkingDirectory test completely on Unix. I don't know
why it needs to be skipped, but if we're not going to verify anything,
don't even try to do anything. This saves us one memory leak at least.
Change-Id: I22e151cc3fa7b4e976972aca8978b88b263d9bee
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is accomplished by introducing dependencies to catalogs.
This requires one API change:
QTranslator::load(const uchar *, int);
changes to
QTranslator::load(const uchar*, int len,
const QString &directory = QString());
Since now, even the load from memory might need a directory if
the memory block contains a qm file with dependencies.
Change-Id: I781f333d07f53bb431d0a7b5fa1abe282dc4d338
Task-number: QTBUG-26138
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When you're inserting a column in front of a rowspanned cell
and this cell is not the first in the rowspan, we would get
the wrong logical index of the new cell (putting it in
front of the initial cell with the rowspan). If the cell
does not span all rows, the table will get into a broken state
and trigger asserts in update(). To fix this, we search for
the first cell after the insertion point which has a logical
index higher than the cell directly before the insertion point.
Change-Id: I42e91a20d77b2ba9c5607f6cab23f51ed888cbd3
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Deprecate qWaitForWindowShown for Qt 6 as it is just a wrapper.
Change-Id: I0f8195679679120bd402e273fed4d331dc926708
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
As requested by Winfried Schenke:
"QPoint should have an unary operator+ (the unary operator- exists).
Classes with arithmetic operators should provide a complete set of
operators, because some template code relies on it."
Task-number: QTBUG-22913
Change-Id: Ib0c5105975f56c15f00bb48d83c8d911f5a204ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
- Make them compile with 4.8 for comparison
- Add Active to WindowStates control
- Add -layout option to windowgeometry
Change-Id: I052330eb8689883c104a0552708ea700c7cd790a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Improve test coverage for QPoint and QPointF.
Separate QPointF tests into their own project.
Change-Id: Id28dc5b85aba9fc179d87b2bca1d99854f27a5ab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Tests which are expected to not build need to get a way to find the
Qt 5 config packages. Because they use try_compile, there is no way
to pass the contents to it.
Work around that by generating a file containing the prefix which
the tests will include.
Change-Id: If43080c241539e4af5fe1c183e7da72066278b73
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QStateMachine inherits from QState, so it should be possible to set
its childMode to ParallelStates, and it should behave as expected
(the machine should emit the finished() signal when all its child
states are in final states).
Task-number: QTBUG-22931
Change-Id: Ic436351be0be69e3b01ae9984561132cd9839fa7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
It's legal to set a QFinalState as the initial state. The state
machine should correctly emit the finished() signal upon entering
such a state in the initial transition, and don't do any further
processing.
Change-Id: Ica8d3fadbbde604512ea1136624af54eb3b13b11
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
In the old implementation, property assignments
(QState::assignProperty()) were "second-class citizens".
Assignments were not really integrated into the state machine
algorithm, but rather done as a separate step
(QStateMachinePrivate::applyProperties()). While that was
convenient for SCXML spec transcription purposes, it resulted
in some pretty poor semantics on the user side:
* Properties were not assigned until _after_ both the
QAbstractState::onEntry() function had been called and the
QState::entered() signal had been emitted.
* Automatic property restoration (QStateMachine::RestoreProperties)
did not play nice with nested states (and parallel states, in
particular).
The proper fix is to refactor the implementation to make
property assignments first-class in the core state machine
algorithm (QStateMachinePrivate::microstep()).
In practice, this meant splitting some steps. Instead of calling
exitStates() straight away, we now first only compute the states
to exit (without actually exiting them), and use the resulting set
to compute which properties are candidates for restoration.
Similarly, instead of calling enterStates(), we first only compute
the states to enter (without actually entering them), and use the
resulting set to compute which properties are assigned by the
entered states.
With that in place, the rest was a matter of moving the various
chunks of the old applyProperties() logic to the place where they
belong in the per-state entry/exit.
All existing autotests pass. Added several tests that verify the
desired semantics in more detail.
Task-number: QTBUG-20362
Change-Id: I7d8c7253b66cae87bb0d09aa504303218e230c65
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Also, remove its subclass QAccessibleSimpleEditableTextInterface
Instead of having the subclass that implements this conveniently,
we move this behaviour over to the bridge. The bridge should
check if role() == EditableText is set, and then it should try to
support the IAccessibleEditableText interface (i.e.
it should accept the calls to replaceText(), deleteText() and
insertText()) and change the text with the following operations:
1. Query the text using QAccessibleTextInterface::text() or by
using QAccessibleInterface::text(QAccessible::Value) as a fallback
2. Do the requested delete/insert/replace manipulation
3. Update the text with setText(QAccessible::Value, newText);
Change-Id: Iee5e41faf14351951e2bfca8c9eac970a113e878
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This test used requires(contains(QT_CONFIG,private_tests)) in its
.pro file, but did not subtract itself from its parent project
SUBDIRS when private_tests weren't enabled.
Change-Id: Idcd0893c4804a8217e4dd33ba9838ff67e996f58
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the transition has no target states, that means the current state
won't change; hence, property assignments should not be performed.
In particular, properties should not be restored to the values they
had before the state was entered.
Change-Id: I237bbb541f939c272777e70c5f26c886ec457a17
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Previously, a registered restorable property would only be
unregistered if the property was animated (see
QStateMachinePrivate::_q_animationFinished()).
But if a property is set directly, it should also be unregistered;
otherwise, the state machine would use the previously saved (stale)
value the next time that property should be restored.
Change-Id: I5d246aa5355ddd0ba5f81b0186a9f0e4f3bbaa3f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Do like QPropertyAnimation and store the QObject in a QPointer.
Purge the assignments list upon state entry and property restore.
Change-Id: I54a56885a2905178ab6aa5cf292b3d25c86b7a97
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Export of color transparency component is added for cases where color
is exported to html. New static function colorValue() is added to
prepare CSS string representation of QColor. When the color is opaque,
it falls down to QColor::name() method which was used previously,
otherwise it returns 'rgba()' CSS statement or 'transparent' keyword in
case transparency is 0.
6-digit precision is used for alpha value as it's maximum which can be
processed properly by Gecko and Webkit engines
(http://lists.w3.org/Archives/Public/www-style/2009Dec/0295.html).
Import part for rgba() statement was also added to QCssParser. It
supports rgba() color values as stated in CSS Color Module Level 3
(http://www.w3.org/TR/css3-color/#rgba-color).
Import of undocumented statement 'rgba(int,int,int,int);' was also
added to preserve regression test success and to provide compatibility
with previous code relying on this behaviour.
Test cases added to QCssParser autotest for rgba(int,int,int,float)
statement and to QTextDocument autotest for rgba(int,int,int,float)
and 'transparent' statements for certain 'color', 'background-color'
and 'bgcolor' properties.
Change-Id: Id341c4e800249820d52edef8003e50f9a74d062b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
In qdbus_cast(), qMetaTypeId<QDBusArgument> as well as
qvariant_cast<QDBusArgument> are used. They don't depend
on any template argument of qdbus_cast(), so their
definitions need to be available at function template
definition instead of instantiation time.
But the necessary Q_DECLARE_METATYPE(QDBusArgument)
was at the end of the header, after the defintion of
qdbus_cast(), which is too late for conformin compilers.
Fixed by moving it up just after the QDBusArgument
definition.
Similarly, in tst_qdatetime and tst_qvector, the
Q_DECLARE_METATYPE() for Qt::DateFormat and QVector<int>,
and with it the specialisation of QMetaTypeId<>, were
issued after the first use of meta typing; too late for
conforming compilers.
Change-Id: I25ca0b06e68d5184597a22708404a8f2040b2de1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a bigger test after this change:
c3e1abad4e
Beside the test of behavior it has the class
FastEditItemView which could be useful in the future.
QTestEventLoop::instance().enterLoop(1) does not perform well.
(IE it makes CI slower). My class could be used to extensions.
(or maybe even to remove a few of these calls)
Change-Id: I4f1460873cd07ddc482d5cfe462b59c47ebb189f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The name is the unique identifier. Code such as
if (oldItem.mimeType() == newItem.mimeType())
really wants to detect whether the item has a new mimetype (name),
not compare static mimetype data such as comments and icons.
Change-Id: I5fe56443295c91e1024c066ad6e7f93d842ae507
Reviewed-by: Wolf-Michael Bolle <wolf-michael.bolle@nokia.com>
removed printsupport tests for wince as there
is no print support on wince and removed the special
handling for wince from 4.8 on some tests as the dependent
modules are not part of qt base anymore
Change-Id: I4ffb22da11f98beee1013f775cb5ce4b936d3211
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
To let this test pass, a bunch of test cases had to be disabled.
Task-number: QTBUG-25300
Change-Id: I26bc08f366c43fb2bf3ba42a5fcbeb3888ed02c0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Add more test data, merging operator!= tests in with operator==
to take advantage of added data.
Change-Id: If0426a3d01b8800cb7363385dbf3bcb21af5ed8f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Windows Xp we can not connect to the pseudo interfaces used for
Teredo, so do not add these to the tests.
Change-Id: I4e20c880fa2d18f266ffcef2f640d8b2e6d0cd21
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Do not try to connect to the Terdo Tunneling Pseudo-Interface as
this will fail for Windows Xp.
Change-Id: I6dcd8369ba1e8642224cd4ac53f4032ed46d050d
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test is nice to have regardless though the main reason for it
is a refactor of hiddenSections in QHeaderView.
Change-Id: Id41a1d5edda2ef75bf432a78cdb3e952303eae92
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This patch improves the manual resizeSection a bit. Before we didn't
consider that the program could maybe resize other sections when the
user was resizing one section.
The main issue with that is that setOffset is so smart that it helps
moving the mouse cursor - however it really shouldn't do if the
program is trying to change something too.
Maybe this won't solve all (possible) problems at once - but it is
a fixed needed just to make something work - trying to make anything
work without this fix is horrible....
Change-Id: I3cefa375a9b8ee4c1ef1e08ba0900025c671e4c6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In 96f1fe8855 we agreed that sections
with negative sizes did not make sense. Of the same reason default
section sizes and minimum section sizes should be not negative.
Change-Id: I6a770e7f510d8e2bb90bfd8f38b4fa0566fc137b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Now that Q_PROPERTY with a QObject derived type is more powerful.
This property can be used in QML so that wrappers for proxy models
do not need to be created, such as in the example
at https://codereview.qt-project.org/#change,13007
Change-Id: I6ba676549d2135585d429a28e214fef0b2a6b1f9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
