Don't call QSKIP when omitting the optional part of the test, as doing
so hides the fact that the rest of the test passed.
Change-Id: I9c102e8daeaf9586b2e510c4c9ce697ead290795
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QTRY_VERIFY() to fail after a reasonable timeout rather than putting
the test into an infinite loop.
Change-Id: Ie0917556e15999a94cc0587f3f4c11c0d743a228
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Register the meta-type in initTestCase(), which is run once, rather than
in init(), which is run before every test function is run.
Change-Id: Ic62a2469da6a2a85254ffc7c4d893395202c50d8
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The threadCount() test function is unstable and had been disabled by
making it not be a slot. It is better to disable it with QSKIP so that
the test output shows that the test function exists and is in need of
repair.
Change-Id: Iccdc8da31e0d15d922f7e9606835d1ff1a3a4966
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Avoid using bug tracker identifiers in test function names. These
identifiers lose their meaning when the bug tracker is replaced.
Change-Id: Ia867f7c2ec2ab9ed546588843d532ac615a34031
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The restored test data was marked as failing, but appears to pass, and
the available history does not explain why it was commented out.
Change-Id: I7e9e3ba72fc8fef42c91ee882efa98d25b3d8317
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When using QSignalSpy, always verify that the signal spy is valid. This
will cause the test to give a meaningful failure when spying on a
non-existant signal. Without this change, tests that spy on a signal to
ensure that it is not emitted (i.e. by comparing the spy count to zero)
could pass erroneously if something went wrong when creating the signal
spy, as an invalid QSignalSpy will always return a count of zero.
Change-Id: I41f4a63d9f0de9190a86de237662dc96be802446
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The data file named "trolltech" has nothing specific to Trolltech in its
contents. Rename it to "testhtml". The lack of a file extension is
intentional.
Task-number: QTBUG-19653
Change-Id: Idc5c5f4ffa447151e47f66ff7364f0fa8753a699
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QDBusArgument QByteArray extraction operator and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting a QByteArray when the value actually is e.g. a struct of
mixed types the byte array extraction will crash as it attempts to extract
the struct data as a fixed array.
The fix adds DBus type checks to QDBusArgument byte array extraction
operator implementations.
The checks invalidate extracting arrays of other types than bytes to a
QByteArray that worked with the unchecked implementation. The rationale
for this restriction is
1) extracting a QByteArray to a variant checks already that the array
element type is byte
2) Results of extracting arrays of types wider than a byte to a QByteArray
are architecture-dependent making such code inherently non-portable.
Task-number: QTBUG-22840
Change-Id: Ie20f2adc06c697a68055c803215fb408568fdd90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument QStringList extraction operator and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting a QStringList and the value actually is e.g. an array of
bytes the string list extraction will crash as it interprets the bytes as
char pointers.
The fix adds DBus type checks to QDBusArgument QStringList extraction
operator implementations.
The checks are as permissive as possible provided crashes are avoided.
Task-number: QTBUG-22840
Change-Id: I4b67d75b59c5052d939f3a69f3e92dabdb3bdd6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument string extraction operators and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting string-like basic DBus type that actually is e.g. an
integer the string extraction will crash as it blindly attempts to use the
integer as a pointer to char.
The fix adds DBus type checks to QDBusArgument string type extraction
operator implementations.
The checks are as permissive as possible provided crashes are avoided.
Previously supported functionality of extracting an object path or type
signature to a string type is retained.
Task-number: QTBUG-22840
Change-Id: I29be1ae592658ca268c65ed692e1d42619d52280
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTestLib-based autotests cannot perform verification steps in the test
class constructor. This needs to be done in initTestCase() instead.
Change-Id: Ib1f7f838f052fa0fc5104603bdac01ffd8313aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
GCC 4.6 fails to build the test because of narrowing conversion.
Change-Id: I927693789be7f3df7bd1a96c8924fc04716a03f0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This adds a new function (and tests) to give the possibility of doing a
QCryptographicHash of a QIODevice, like a QFile or whatever people
needs.
It is a quite handy overload in many cases.
Change-Id: I22fd272f05571844641b3daefcc6746be4e5c7c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a regression caused by the NTLMv2 authentication patch.
I have manually tested NTLMv2 authentication against MS IIS and reverting
these two lines does not break it.
Task-number: QT-5209
Change-Id: I64159cbe468e1a7f834f8726fd0c9d4ab4c54b38
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
After 8fd64d22ac (Make usage of internal
QVariant space.) change QVariant started to "inherit" movablity from
interned type.
This change fix it by interning only movable type in QVariant and by
using external allocation for not movable ones.
Obviously, this change has negative impact on QVariant it self, but
after it, QVariant will behave a lot nicer with our containers.
Change-Id: Ibffc95833918f65be737f52d694ee81a2036c412
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We need that information to perform some optimizations in QVariant.
Change-Id: Id9a1716e49e4cedd17cd09a32fea4ff003ef61f2
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
When decoding a string don't assume valid modifier strings. If a
modifier string is unknown return Qt::Key_unknown instead of skipping
the modifier.
Currently 'Win+a' is decoded to 'A' but should be Qt::Key_unknown.
Change-Id: I1c82031159a8b3c19924a7c9e991bc6b1f90d617
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Add styles/qmacstyle_mac back to the build, modify
qstylefactory to load it on Q_OS_MAC.
Move helper functions from platforms/mac to
qmacstyle_mac.mm. QMacStyle should now be self-
contained and not rely on anything from platforms/mac.
Change-Id: I68fe40bb7f88c01269968bffd9579b7f3b932d4c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Test the authentication cache works properly with "cancelled dialogs"
or if the user enters username/password incorrectly.
Expected behaviour is based on web browsers:
If cancelled, current request fails, and prompt again the next time.
If wrong password is given, prompt again and retry the current request.
If bad credentials are in the cache, prompt again
Task-number: QTBUG-22875
Change-Id: Ic02ccac8dbeb3f2580ca4ffe47d0773982c4ab25
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
The test was skipped, but still tried to compile code that uses
exceptions. The throwing class it uses was conditionally compiled
out earlier in the file, causing an error for undefined class.
Task-number: QTBUG-23028
Change-Id: Ia2e05a8a0abbf0e913f6c41e85bfee8b85cbc8a5
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Introduce a specialization for qCompare(QImage,QImage) that
checks isNull, size and format and outputs verbose messages.
Check isNull, size similarly for QPixmap.
Add an autotest:
- Add test to cmptest and make it a GUI application since
QImage requires QGuiApplication.
- Make testlib/selftests capable of running X11-GUI applications
by passing DISPLAY.
- Ignore stderr output for cmptest
- Add test data
Change-Id: I2b29c7822fbeedf2b22c90889739ed7ff859ce92
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Was basically checking that a method call is a method call and
QApplication::setInputContext() sets the input context.
Change-Id: Ia8723fe245f2480d503f0140f61078dc074161fc
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
QTest::pixmapsAreEqual() was left in the Qt4 API for compatibility with
some old tests written for Qt3. QCOMPARE() is the preferred way to
compare QPixmaps and provides superior diagnostic output when a
comparison fails.
This commit removes QTest::pixmapsAreEqual() from the testlib API and
replaces the last few remaining calls with QCOMPARE.
Change-Id: I051c0e7d3bda072855fcd262d82e8e540619233b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Critical bug... Good thing I had backups of my $HOME.
Change-Id: I43b3a80786c946b0aec797036c1164d436d521f8
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The "happy eyeballs" connection code means that IPv4 and IPv6 connections
are both attempted for a http request.
For a normal http server, this is no problem, but the MiniHttpServer in
the test code is very simplistic and cannot cope with more than one
client connected at the same time.
On windows this causes all these tests to fail with timeouts.
Changed the MiniHttpServer to listen on IPv4 only instead of Any address.
Change-Id: I81e249997d894d266001da474a351b1f5642599e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a regression introduced in Qt 4.8
When QApplication::processEvents is called from a destructor, it is
possible that pending events would still be called on the already
destroyed subclass.
Prevent that by using the same pattern as in QMetaObject::activate
Change-Id: Ida50db07ae089264402dafcde7a41a066479d08b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
childAt used to return an integer.
Return an interface instead.
Not requiring a direct child to be returned allows optimizing
by bypassing iterating through the hierarchy of accessibles.
For QtQuick this is the only sensible way of implementing this.
The bridges are still responsible for finding the top-most element.
The default implementation in QAccessibleObject is sufficient
to return direct children. The implementation in
QAccessibleApplication is therfore no longer needed.
Change-Id: Id7100dd5bcc3a98de516a7f4a12eaaa41cb46d26
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Required for launching the sub-processes. The test worked only
when launched locally, not from 'make check'.
Change-Id: I42c9202a7726c3135f94445fb336b2b8241535a4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
