This follows up 130c2baa93.
Change-Id: I2f6c9b4f995af427cec9a2162b782039debf8564
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use a QTemporaryFile in readFromFileAfterJunk() instead writing
to the current directory which might not have write permission.
Enclose each call to QFile::open() in QVERIFY2() with error message.
Change-Id: I3c5da31c6681a2396cee473cafe7d92c5c220de3
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Create a temporary directory instead of writing to the
test data directory or home path (Android).
Change-Id: I6af583e5da91eefb603eaae179e7d789487dc626
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The ppm decoder used a fixed size buffer to discard comment lines,
which would fail for comments longer than 100 characters.
Task-number: QTBUG-49414
Change-Id: I92e910e025cf7584a6ff1c0e5b0e8a4ab281d479
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Use QVERIFY2() with QTemporaryDir/File::errorString() consistently.
Attempt to catch issues like the below warning and follow-up issues.
QSYSTEM: tst_QFiledialog::clearLineEdit() QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\_____aaaaaaaaaaaaaaaaaaaaaa" (Access is denied.)
Task-number: QTBUG-47370
Change-Id: I58a6e87c502627e976efa62ad73c912f3b2d49fa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
According to MSDN, the zero value of ICONDIRENTRY bHeight and bWidth
fields mean a maximum icon size 256 pixels. So QtIcoHandler::option()
should return 256 instead of 0 pixels for such icons. Also there is
fixed wrong seek offset at the second call on this method.
http://blogs.msdn.com/b/oldnewthing/archive/2010/10/18/10077133.aspx
Task-number: QTBUG-48103
Change-Id: I99f0c9720fd58889045b0c73c51498f2065b0b91
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
There was an attempt to allow static instances of QIcon in
7727a4355876607a1a022ff54e2570dae883f79c (Qt 4). This patch does only
solve some of the corner cases and broke with
aa5f70c00a. Since the "breakage" has been
there for two years, let's officially declare it unsupported instead of
trying to work around the issue.
Change-Id: I61e12fd03953763ee2e70eae58bcaecabdcb85b8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Verify the bounding rect of the left hand side of copy/assignment,
not the right hand side (which is passed by const ref).
Change-Id: I5044d269fe0acb5f4484c82da7e030ca33958792
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
When a premultiplied alpha changes value because it is rounded to fewer
bits the premultiplied colors may need to be recalculated with the new
value. Otherwise the color will both be wrong and potentially invalid.
Change-Id: I9ec74a22aac73cd7ffab04e180cf2bf35bb4c315
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Make it possible to read images with EXIF orientation automatically
applied. This was originally implemented without opt-out in Qt 5.4, but
reverted. Here it is implemented as opt-in for JPEG, and opt-out for TIFF
to keep behavioral consistency.
The EXIF support for JPEG was written by Rainer Keller.
[ChangeLog][QtGui][Image plugins] An option has been added to
QImageReader to enable automatic application of EXIF orientation.
This behavior was default in Qt 5.4.1, but reverted in Qt 5.4.2.
Task-number: QTBUG-37946
Task-number: QTBUG-43563
Task-number: QTBUG-45552
Task-number: QTBUG-45865
Change-Id: Iaafd2519b63ede66ecc1f8aa4c7118081312b8f5
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Completes the inplace converters so that we can rely on inplace
conversions to succede as long as the image depth is the same.
Change-Id: Ia1ae34b5de1bc16e87ff5403bdacfcae44a22791
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Some inplace conversions would not set the requested image format in
the returned image, due to the same conversion being used for several
destination formats.
This patch ensures all inplace conversions return the right format,
and adds testing infrastructure to easily test iterate over all formats
so that they all can be tested.
Change-Id: I68ab17a713ddb2aa8ed6aaf0a0a1ec8bbcb56090
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
The one converters from RGB30 was misplaced in the method table, and
the unpremultiplication from A2RGB30 to RGB30 had an underflow mistake
when alpha was 2.
Change-Id: I92c11ede28611a3dbdce72aca1898845c120c209
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Due to a behavior change.
This reverts commit 9157087334.
This reverts commit 16c32c6dfb.
Task-number: QTBUG-37946
Task-number: QTBUG-45552
Task-number: QTBUG-43563
Change-Id: Idf8df7d8f22465e8f6b51acb68993ac97208b184
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Some QImage methods were not preserving image metadata, or only
preserving some of it. This adds the missing parts and adds a test for
metadata.
Change-Id: Ib5892a23e49dfde5ea26074d3deaa887fa930c6b
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
The QImage inplace mirroring method, failed to handle the middle line
when mirroring both ways (rotate 180). In both other mirroring cases
the middle can be left untouched, but in this case it needs to be
mirrored half way.
To make the logic simpler, double mirroring will now mirror half the
lines instead of half of every line.
Change-Id: Iaa1f1e1c3f7dedfb78891fc93207f6d0c64bcafe
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Cleaning up smoothscale code. Upscaling is improved using existing
optimized interpolation methods, and downscale is given SSE4.1
optimized versions.
Change-Id: I7cdc256c26850948aef7dae26fda1622be6b8179
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
This continues 68762151db
When doing format conversion, the optimized inplace codepath did not
check if the image data was external, i.e. if the QImage had been
created by the constructor taking an existing external buffer.
The previous commit fixed the readonly case. But in the case of the
QImage constructor taking non-const uchar*, data will be read-write,
but still external. This would of course crash if the converter tries
to realloc it.
Task-number: QTBUG-44610
Change-Id: I94d275d464e8af221682b538fc3e4897a59c061e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Improves the conversion from RGB888 to RGB32 on platforms without SIMD
versions. This includes the fallback used on non-neon ARM devices.
Besides image conversion the routine is also used for decoding JPEG.
On x86 this version is within 0.7x of the speed of the SSSE3 version.
Change-Id: Id131994d7c3c4f879d89e80f9d6c435bb5535ed7
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
When doing format conversion, the optimized inplace codepath did not
check if the image data was readonly, i.e. if the QImage had been
created by the constructor taking an existing external buffer.
Task-number: QTBUG-44610
Change-Id: I085ff8da427bc4ee392f548dffd2418b63148965
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
We've been setting the -Zm argument since the dawn of times (even before
the first git commit). Anyhow, MSDN from VS2008 onwards indicates
that this is not needed:
"In earlier versions of Visual C++, the compiler used several discrete
heaps, and each had a finite limit. Currently, the compiler dynamically
grows the heaps as necessary up to a total heap size limit, and requires a
fixed-size buffer only to construct precompiled headers. Consequently, the
/Zm compiler option is rarely necessary."
[ChangeLog][Compiler Specific Changes] Visual Studio: -Zm200 (an option to
specify the precompiled header memory allocation limit) is not added anymore
by qmake to the compiler calls. If you encounter an C1076 compiler error you
might need to re-add it in your .pro file.
Change-Id: Ia4bec7eba09d893a7d81886a1814602b9ce7563c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
The methods for inplace conversion from RGBA to ARGB was misplaced by
one step causing conversion to RGB16 to get an invalid method.
Change-Id: I3b2b4cffe993705c48613eec7d9b7c6213f57fc2
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
We still have a bunch of Q_WS_ ifdefs in our code, which are easy to
mistake for Q_OS_ ifdefs when quickly scanning the code. By renaming
the ifdefs we make it clear that the code in question is dead.
In incremental follow-ups, we can then selectively either remove, or
port, the pieces that are dead code.
Change-Id: Ib5ef3e9e0662d321f179f3e25122cacafff0f41f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This commit fixes incorrect logic of icons' lookup if there are
fallbacks or more than one theme's directory.
According to Icon Theme Specification, Directory Layout section, theme
can be spread across several base directories by having subdirectories
of the same name. This makes possible to extend system themes by
application-specific icons without making of collisions with other
applications.
According to Icon Naming Specification, Icon Naming Guidelines section,
icon name may contain dashes to separate levels of specificity in icon
names. This makes possible to set in application very specific icon
which may be not in every theme. So it can fallback to less specific one.
Change-Id: Iafc813902a3646be56e8f1d3a2fdbf8fd32ac542
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The files for the test have to be included in a qrc to be available on
Android.
Most of the image files are already in a qrc, but a couple were missing.
We add this in a separate qrc to avoid interfering with the tests on
other platforms.
Change-Id: Ibb24f5015a1aba4d5622e14f7aae80bc18611ec4
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Add all test data to resources.
Change-Id: I31b0dbb7546a15151f64523c86bf8eb687ff9ec0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: I1b18415cd53a27bd23e51ac6b738d3ed94162ac9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources. Write output data into a writable location.
Change-Id: I5a1c212f6108abf2a82288a2c84cfb31eda5e101
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The orientation is unsigned short, read it as such. In
JPEG-files created by Ricoh/Pentax cameras, the data is saved in
Motorola format. Reading the wrong data size will produce invalid
values when converting the byte order.
Change-Id: I8f7c5dc5bfc10c02e090d3654aaefa047229a962
Task-number: QTBUG-43563
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Add all test data to resources.
Change-Id: Id42a4c033b75409f65cb4d56ebf1161336b93832
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: Ic12f8fce9afb965aff32e7141516c8d223e64491
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: I7f9e7650156b174b7c16270d86b78e9408dff254
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The Qt bug tracker URL changes as part of the qt.io transition
Change-Id: Icb4ab198943b93639b5e3a8d99262303785c6459
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
