Qt5 doesn't support MSVC versions before 2008, so workarounds for
earlier versions are no longer required.
Change-Id: I429feff99fe61d286637b960d92fd58962f8aefa
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
If qputenv fails, the test should fail rather than skip, particularly as
the test is supposed to be testing qputenv.
Change-Id: Iabe13d360cabaeffda46fab19f1dd0d4ed8e1eee
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There were only two ways the QSKIP could be called: (1) the C++ runtime
is broken, or (2) the earlier call to resize the string failed.
In both cases there should be a hard test failure. In the former case, a
broken C++ runtime calls all of the test results into question. In the
latter case, the QByteArray::resize() method has suffered a regression.
Change-Id: I5adf942d2eb4d746d2ab31e98571c5d9bdd40890
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The bug referenced in the QSKIP has been marked as resolved, so this
QSKIP should no longer be needed.
Change-Id: I41dd964827a3df8fb5ebb9674cef9db59c03d432
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Fix typos I was able to find in `tests/auto' directory.
Change-Id: Id0bfcc18301381ac8b1ca8d5af17bd926e5913d4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This commit re-enables tests that are assumed to be ok by now, since they:
- Have been passing in CI for a long time recently (more precisely, not failed once in pulse run range 730-829).
- Did not have any known issues associated with them.
Note that not all of these tests were disabled as a result of QTBUG-21402.
Task-number: QTBUG-21402
Change-Id: I80bbf8b351bd9165aa968e98f4dc17e8be6bc7c3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Returning text "1.00" instead of "1" sounds right to me.
Checking the test before the widget is shown/validated sounds pointless.
Change-Id: Ifc9e51dc9448a5bb3afbd566fe10524fbabc654f
Reviewed-by: Kristoffer Flottorp <kristoffer.flottorp@nokia.com>
The qrc tests need further investigation.
Bring at least back the basic test.
Change-Id: I302a37b6c989af76db67716ffcf10a0960234156
Reviewed-by: Kristoffer Flottorp <kristoffer.flottorp@nokia.com>
Due to clearAccessCache being made part of the public API in Qt5,
this autotest can be run on normal Qt builds again
Task-number: QTBUG-17312
Change-Id: I3b70237a28ed141ffb49762cc40c8a528f9be6a8
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Fix QtSQL aoto test server addresses. New servers are located in
Brisbane. Old Oslo test servers shall not be used anymore.
Change-Id: Icd4ae4c0193f71410d572bfa014272e1e77586c0
Reviewed-by: Trust Me
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I3c1d993d5682db913aadc267d98a638061f393d6
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I48ab0ee64d8348cada2e6c7b27c67b6bbc36280d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
If the test decides not to do some extra testing for certain styles, but
doesn't find any failures in what it has done so far, it should pass
rather than skipping. Removing the QSKIPs also corrects the leakage of
the memory pointed to by "widget".
Change-Id: Ibd0f3f0605660c92e9bab2a3d1d9f31b52192575
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
If the test decides not to do some extra testing for certain styles, but
doesn't find any failures in what it has done so far, it should pass
rather than skipping. Removing the QSKIPs also corrects the leakage of
the memory pointed to by "widget".
Change-Id: Id4cf7e8dc48f836d2c6dcde57dde87797a2fe036
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Several test functions use IPv6 reverse lookups, which evidently don't
work on HPUX 11i, but only one of these tests was skipped on that
platform and the others presumably fail.
This commit also removes the commented-out test data and makes it easier
to put some useful test data back. QTBUG-22287 records the fact that no
real IPv6 hostnames are currently used in the reverseLookup test.
Change-Id: Iff1ed1b725492bcc28ca4cb5f8e2dc106887c0b4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I97046aa51f1b3fc100e2eb2fa115f1bf8ae6437d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I7c1ffe9c8c294dbdc988e1582e580b1ed3f4593e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
These macros should only be called inside a test function, otherwise
they cannot abort the test function correctly. Solve this by making the
helper function return a boolean result (and output a warning on
failure to help with debugging) and verify the return value in each test
function that calls the helper.
Change-Id: I599673fda49051baf80a8c94b5d85a4d8c2cb406
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The standard IPv4 loopback address is 127.0.0.1, however anything in
the 127.0.0.0/8 range is also a loopback address.
isLoopback returns true for any address that is in the IPv4 loopback
address range, or is the single IPv6 loopback address ::1
Task-number: QTBUG-22246
Change-Id: Ic39100e2e97a52db700e01b109998a1cfd4335e3
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
Add new cases for custom types and QStringList.
Change-Id: I79f8d415be43774e6b2488e8a6a8028bf4a5fd45
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Moving three benchmark tests from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void asScrollingList();
- void cacheBenchmark();
- void contiguousCacheBenchmark();
were moved to 'tests/benchmarks/corelib/tools/qcontiguouscache'
Task-number: QTQAINFRA-353
Change-Id: Icbdd852f9c14c3df042d2e19abd42af6c645a3cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
`make check' is intended primarily for running functional tests.
For the most part, it does not make sense to run benchmarks in the same
test environment as the functional tests.
Change-Id: I33b2cf1e833fc6b1d0b3525018945148ba2d3492
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Using relative paths in #include is best avoided.
Change-Id: Iacaab7b4c402dfc96f944f21c634afa6e4a2a32a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The queries were limited to current block, because that is the
available surrounding text. Input method side, however, cannot then
distinguish between anchor being really at start or end of the
surrounding text, or beyond it. Without the limitation there at least
is a way to know anchor is at unknown territory.
Change-Id: I388d33566388344ec816ea7d86662b7e36a3d7d0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Moving benchmark test from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void benchmark();
was moved to 'tests/benchmarks/sql/kernel/qsqlquery'
Task-number: QTQAINFRA-353
Change-Id: I241bb1a2fba1c1b5524c21e5941a6c5daf5a4a89
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Which required porting the related unittests to qstandardpaths
Change-Id: I6eb63c46845f05cd29cc42b59872707526277c90
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
With this change, the file template is always processed in original
QString format. Trying to generate native paths before adding a missing
placeholder mask could change the meaning of templates, such as "." and
"..", which are now tested to mean "..XXXXXX" and "...XXXXXX",
respectively.
After ensuring the template includes a placeholder mask, the path is
converted to a native *absolute* file path and the mask is sought for
again. On Windows, native paths were already absolute. On Symbian, we'd
need at least a clean path, as "." and ",," are not natively understood.
There is a requirement that the placeholder mask /XXXXXX+/ makes it
through this conversion unaltered, which relaxes prior requirements on
*nix platforms. On Windows and Symbian the conversion is under Qt's
control and not user-configurable.
Reviewed-by: Shane Kearns
(cherry picked from commit 401722ef9e6fe79bd41f9d5f79668f5c4997c8e6)
Conflicts:
tests/auto/qtemporaryfile/tst_qtemporaryfile.cpp
Change-Id: Iac823881c865adf0931dc4f429c6c1ef135eeb56
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Besides generating a unique name, createFileFromTemplate now also
acquires a file handle on all platforms. The file engine's native handle
is passed by reference and modified in place.
This fixes a long standing security issue on Windows.
On Windows and Symbian platforms we directly use the "native" file path
when processing the template and generating the unique name. Since the
native encoding is known, conversions at this point are safe.
Errors other than "file exists" are propagated to Q(Temporary)File,
and result in a failure in open(). The changes also unify error handling
and should give consistent behaviour across all platforms.
Worthy of note, there's a change in behaviour on Windows and Symbian:
fileNames returned by QTemporaryFile on Windows and Symbian are always
absolute after open has been called. This has to do with how
QFileSystemEntry::nativeFilePath works on these platforms. (Test was
updated to reflect change in behaviour.)
Reviewed-by: Gareth Stockwell
Reviewed-by: Shane Kearns
(cherry picked from commit ff9b69838ec146aeb43d4af8a03043f9c5f0454d)
Conflicts:
tests/auto/qtemporaryfile/tst_qtemporaryfile.cpp
Change-Id: Ibc9affb321ea4f4b193efc1f7336c9770b43d8df
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When the SkipAll mode is used, tests only report a SKIP for the first
line of test data and subsequent lines are not reported at all. This
behaviour makes it impossible for anything post-processing test results
to accurately report test pass- and run- rates because they cannot see
how many lines of test data were skipped.
This commit removes SkipMode. QSKIPs in regular test functions and data
functions are treated the same as SkipSingle, so that every skipped line
of local or global test data is reported in the test log. QSKIPs
elsewhere are treated the same as SkipAll -- skipping in init() causes
the next test function to be skipped entirely, and skipping in
initTestCase() or initTestCase_data() causes all test functions to be
skipped.
This commit only changes qtestlib and the selftests. A further commit
will change the autotests to remove the SkipMode parameter from QSKIP
calls.
Note that the change in expected output for the globaldata selftest is
deliberate, as the QSKIP in the skipLocal test function has effectively
changed from SkipAll to SkipSingle.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I7b1c53fe7ca9dde032810b789d967e2a402bbe5d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Alex <alex.blasche@nokia.com>
There are lots of buggy SSL servers around and to connect to them you
need to disable various features. This commit adds the ability to
disable the SSL ticket extension, the ability to disable the insertion
of empty fragments, and the ability to disable compression.
Task-number: QTBUG-21906
Change-Id: I3e1d0347a46e9030b889bbf15b2aad19b8513b73
Merge-request: 68
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Removed the bogusFds test, as it is only run on symbian in 4.8
Forward ported the posixSockets fix from 4.8
Task-number: QTBUG-20892
Change-Id: I8a8c67e12eae402724bbb07fe37e7ea1770aaeee
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Now, users of QBasicAtomicInt and QBasicAtomicPointer must be sure to
use .load() and .store() to access the values.
Change-Id: I6b48ed175618baf387dd38d821bd50e6e93c082e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
