We want to preserve nullness where possible. Test that various ctors
do the right thing when presented with null input.
Pick-to: 6.3
Change-Id: Ia1a1d4fb3c919b4fed2d9b87827815a1b5072c54
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By GHS the only C locale is supported.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I3d89f1b2d9eb7f77b75e13a5ca65cebc24538890
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The documentation says that if it's negative, we find the null
termination. This bug was introduced with the clean up to use
QByteArrayView in commit 8897aa071a.
Fixes: QTBUG-99640
Pick-to: 6.3 6.2
Change-Id: Ib42b3adc93bf4d43bd55fffd16c89fa4a960f3a9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
... as opposed to QByteArray::toHex('\0'), which doesn't.
Picking to all LTSs because it's in a test.
Pick-to: 6.3 6.2 5.15
Change-Id: I392d5714c4865e530a246ed30a13cdac26b98e0b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We now have a more reliable test for the case with freeSpaceAtBegin(),
so remove the old test, after we verified it actually doesn't even
test that case.
Task-number: QTBUG-99330
Pick-to: 6.3 6.2
Change-Id: Ic108a722cd2fef1e63a05085a76d7572d1f8c875
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The construction of the byte array doesn't actually yield
freeSpaceAtBegin() (anymore?), so the comment above it is misleading
(and the test didn't manage to catch QTBUG-99330, either).
Before removing the misleading test, verify that this assumption is
actually correct across all platforms.
Task-number: QTBUG-99330
Pick-to: 6.3 6.2
Change-Id: I2f497321abc26c4148ced5ac12a5880b9ff5ba9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Amends 9b320edb53.
The above commit made the mistake of relying on the 30yr+ old
fundamental relation
size() - capacity() == freeSpaceAtEnd()
which, however, Qt 6's prepend()-optimization (freeSpaceAtBegin())
broke. Because of that, while size() - capacity() may be large enough
to hold the new data, if freeSpaceAtBegin() > 0, then freeSpaceAtEnd()
may not.
Fix by inspecting freeSpaceAtEnd() instead of capacity(). The
following reserve() call is unaffected, since it internally already
adds freeSpaceAtBegin() to the requested size, which is why the
unconditional reserve() in 9b320edb535a0fbe118933d2e983b73f90c32685^
worked while 9b320edb535a0fbe118933d2e983b73f90c32685's capacity()
check did not.
Fixes: QTBUG-99330
Pick-to: 6.2 6.3
Change-Id: I520f36216011423f97a24484263acd40d8b1fa43
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The first case is simple, as it's a static overflow. Theoretically,
the compiler would be allowed to just remove the complete function as
dead code. This is an error left from the port from int to qsizetype:
Qt 5.15 there has uint(MaxAllocSize) + 1, so use quint here again,
qint64 is wrong.
In the second case, we _may_ reach alloc == MaxAllocSize. Check that,
if we do, we don't then add 1 to it.
Pick-to: 6.3 6.2
Change-Id: I93044ed6f1b77559642fa1e4e8f313cf59eeeb79
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
- add test resources to binaries
- link Qt::Gui to tst_qpointer for static build case
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I311827b9c641eaf9537091b051c15f9fcbcb9f0c
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit extends functionality for QLocale::codeToLanguage()
and QLocale::languageToCode() by adding an additional argument
that allows selection of the ISO 639 code-set to consider for
those operations.
The following ISO 639 codes are supported:
* Part 1
* Part 2 bibliographic
* Part 2 terminological
* Part 3
As a result of this change the codeToLanguage() overload without
the additional argument now returns a Language value if it matches
any know code. Previously a valid language was returned only if
the function argument matched the first code defined for that
language from the above list.
[ChangeLog][QtCore][QLocale] Added overloads for codeToLanguage()
and languageToCode() that support specifying which ISO 639 codes
to consider.
Fixes: QTBUG-98129
Change-Id: I4da8a89e2e68a673cf63a621359cded609873fa2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QStringBuilder] Added support for QByteArrayView.
Change-Id: If2c23549d533dd31c320f3ee455fcd01ea5b460a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Commit 6cee204d56 introduced overloads
of lastIndexOf() which drop the 'from' argument, inadvertently fixing
QTBUG-80694, but failed to provide the new overloads for all existing
lastIndexOf() overloads, making the fix for QTBUG-80694 incomplete.
This patch completes the fix, by adding the missing overloads (for
char-likes) and also adds the missing (non-regex) tests to
tst_qstringapisymmetry.
Also amends 1c164ec7f2.
Fixes: QTBUG-80694
Change-Id: Ib4b3d597d658ce2edf01a2bce0d711ecea593d6e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The only documented replacements for Q*String*::arg() are sequences like
%1, %2, %3 -- where the n-th number is expressed using a sequence of
ASCII digits [1].
The code parsing the replacements however used the QChar::digitValue()
function. That function simply checks if a QChar has a *Unicode digit
value* (no matter what its block/category is), and if so, returns the
corresponding digit value as an int (otherwise returns -1).
The result of this is that a sequence like "%¹" or "%१" actually
triggered substitutions (both count as "1"). Similarly, QChars with
a digit value would be parsed as part of longer sequences like "%1²"
(counting as "12" (!)).
This behavior is weird, undocumented, and extremely likely the usual
backstabbing by Unicode by using "convenience" QChar methods -- that is,
never *intended* by the implementation.
This commit deprecates (via warnings) such usages, which for the time
being are left working as before (in the name of backwards
compatibility). At the same time: given it's extremely unlikely that
someone would be deliberately relying on this behavior, it implements
the desired change of behavior (only accept sequences of ASCII digits)
starting from Qt 6.6, that is, after the next LTS.
Throughout Qt 6's lifetime users will still be able to control arg()'s
behavior by setting an env variable, but that variable (and the support
for Unicode digits) will disappear in Qt 7.
To summarize:
* Qt 6.3->6.5: default is Unicode digits, env var to control
* Qt 6.6->6.x: default is ASCII digits, env var to control
* Qt 7: only ASCII digits, no env var
[1] That's the name Unicode gives to them, cf. https://www.unicode.org/charts/PDF/U0000.pdf
[ChangeLog][QtCore][Deprecation Notices] The arg() functions
featured in Qt string classes have always been documented to require
replacements tokens to be sequences of ASCII digits (like %1, %2, %34,
and so on). A coding oversight made it accept sequences of arbitrary
characters with a Unicode digit value instead. For instance, "%2੩" is
interpreted as the 23rd substitution; and "%1²" is interpreted as the
12th substitution. This behavior is deprecated, and will result in
runtime warnings. Starting from Qt 6.6, arg()'s behavior will be changed
to accept only ASCII digits by default. That means that "%1²" is going
to be interpreted as substitution number 1 followed by the "²" character
(which does not get substituted, so it gets left as-is in the result).
Users can restore the previous semantics (accept Unicode digits) by
setting the QT_USE_UNICODE_DIGIT_VALUES_IN_STRING_ARG environment
variable to a non-zero value. In Qt 7, arg() will only support sequences
of ASCII digits. Note that from Qt 6.3 users can also set
QT_USE_UNICODE_DIGIT_VALUES_IN_STRING_ARG to zero; this will make arg()
use ASCII digits only, in preparation for the future change of defaults.
Change-Id: I8a044b629bcca6996e76018c9faf7c6748ae04e8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test currently passes in Qt 6, but fails in Qt 5.15, thus the
QT_VERSION check.
Pick-to: 6.2 5.15
Task-number: QTBUG-98653
Change-Id: I3c7b9bc7ef74f605ff63768b38c473296274d0de
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Extract the definition of q20::ssize() from tst_qanystringview.cpp,
where it had to be placed for its backport to 6.2.
Change-Id: I3f758c98a4b1efd453f4fc044b8d3f1a89de62d1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Need to use QConcatenable<>::ConvertTo for SFINAE, the forwarded type
alias in QStringBuilder itself doesn't work.
[ChangeLog][QtCore][QAnyStringView/QStringBuilder] Implicit conversion
from QStringBuilder to QAnyStringView now works as advertised.
Pick-to: 6.2
Fixes: QTBUG-98138
Change-Id: I1c300675cf43b13017bc56398ae5d8c1c51e64fe
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The relevant MS system calls (say they) don't support date formatting
for years < 1601 (but apparently do in fact) and the year field of the
data structure is unsigned, so can't support years < 0. As a result,
the windows back-end for QSystemLocale failed for negative years.
So replace year < 1601 with a place-holder and substitute after
formatting.
Added new tests (based loosely on one in qtdeclarative that failed) to
verify that this actually works. These reveal that macOS also fails to
handle negative years; marked as expected failure there pending a fix.
Change-Id: I9b63cefd5f0b77a39cf1238549412de3e26ca1bd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Explain why QSystemLocale needs to be an export. Unexport
QLocaleId::fromName() now that qttools no longer uses it.
QLocalePrivate was only Q_CORE_EXPORT for the sake of one use in
tst_QLocale, that can now be replaced by a call to a public QLocale
method.
Change-Id: I1efe8ee03488acfc6e1c36661f6e956a86e191c3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Stop turning THAI CHARACTER SARA AM into a grapheme boundary because it
breaks a test and chromium does not consider it to be a separate
grapheme.
Fixes: QTBUG-88545
Change-Id: Ib1aea8dbb66ac42b2129cf9fe04c39f5f76eeb36
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update tst_qlocale to take into account "narrow" day representation
change for Russian locales. This version of CLDR changes narrow forms
to one letter. Previously those forms were identical to short forms
(two letter). The new representation is consistent with other languages
and so does not appear to be a bug.
Fixes: QTBUG-94358
Pick-to: 6.2
Change-Id: I9724c281a250685da8232e5c05c9c375a8c79253
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since QByteArray/QByteArrayView don't overload nicely, we need to make
the existing QByteArray overload a Q_WEAK_OVERLOAD (= a template) as a
tie breaker. This automatically prefers the QByteArrayView version
over the QByteArray overload, transparently optimizing existing users
passing char string literals to avoid the implicit creation of a
QByteArray just for passing the separator.
None of our modules exports a subclass of QByteArrayList, so turning
join(QByteArray) into a function template should be ok.
[ChangeLog][QtCore][QByteArrayList] Added join(QByteArrayView)
overload.
Change-Id: I090671d9b94c30b63a986f17e966d124c22b5c54
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Collation with the default QCollator object (no numeric, punctuation or
case sensitivity changes) is a common-place occurrence, so add two
functions to do this work.
It's also what QString::localeAwareCompare() calls.
The test ends up testing that default, static collator updates after the
default QLocale changes too.
Task-number: QTBUG-95050
Change-Id: I7e0b82c2d2fe464082d8fffd1696ac77f32840b2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The check was made against the default locale but the code calls the
system functions (wcscoll, wcsxfrm, wcscmp) for locale-specific
collation, so should be comparing to the system locale's collation
locale (i.e. LC_COLLATE). Also correct the Android-only check in
tst_QCollator::compare() which duplicated the check but neglected the
C locale, which is also supported (via QString::compare).
Pick-to: 6.2
Change-Id: I48c3237dd6825e2070272ab88d95bdb8cbb9fc37
Reviewed-by: Aleix Pol Gonzalez <aleixpol@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The call to std::from_chars() accepts a sign, but we've already dealt
with a sign, so that would be a second sign. Check the first character
after any prefix is in fact a digit (for the base in use). This is a
follow-up to commit 5644af6f8a.
Fixes: QTBUG-97521
Change-Id: I65fb144bf6a8430da90ec5f65088ca20e79bf02f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This corresponds to Unicode version 14.0.0.
Added the following scripts:
* CyproMinoan
* OldUyghur
* Tangsa
* Toto
* Vithkuqi
Full support of these scripts requires harfbuzz version 3.0.0,
this version adds support for Unicode 14.0:
https://github.com/harfbuzz/harfbuzz/releases/tag/3.0.0
With this release 10 test cases in tst_qurluts46 were fixed, one
additional test case is failing in tst_qtextboundaryfinder and
is commented out. In total 62 line break test cases and 44 word
break test cases are failing.
A comment in src/corelib/text/qt_attribution.json was updated to
include the URL of the page containing UCD version number.
Fixes: QTBUG-94359
Change-Id: Iefc9ff13f3df279f91cbdb1246d56f75b20ecb35
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For now it only has a trivial test (empty) and an all-surrogate test
(Chakma digits) - but at least now all conversions to and from UTF-16
are tested. In particular, there were previously no UTF-32 tests.
Pick-to: 6.2
Change-Id: I9317928a88b9990530126db80e4756b880a364df
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
clang warns that: local variable 'big' will be copied despite being
returned by name [-Wreturn-std-move]
So force the intended move using std::move.
Change-Id: If5ff557c1b577789e6659783d8106295fafb3485
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Given on most CI configurations we run tests only on debug builds, this
means that effectively we don't test JIT paths (JIT is kept disabled in
debug builds). To keep it enabled in a test, we have a few options:
* export a developer-build-only variable from QtCore, to force JIT
usage, and set it in the test. This is still suboptimal as many
configurations aren't using developer builds in the first place;
* use the already existing QT_REGEXP_USE_JIT environment variable,
setting it from CMake/CTest. The problem here is that although add_test
does support it, we don't expose it through our wrapper functions;
* just set that env variable from within the test itself. I went for
this option.
Change-Id: I73abfb7fc0d76ec77e881f24c5daf5be304ab948
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch removes most of the checks that are made using C++20
__cpp_* macros for features available in C++17 and earlier.
Library feature check macros (__cpp_lib_*) are unaffected.
Change-Id: I557b2bd0d4ff09b13837555e9880eb28e0355f64
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This ensures that a command such as
$ ninja tst_qlocale && ninja tst_qlocale_check
will automagically build the syslocaleapp program that the test runs
from a subtest. Similar for testlib's selftests and tst_QProcess.
As a drive-by, pruned some legacy comments from when CMakeLists.txt
files were generated from .pro files.
Change-Id: I67691a8175aaef124d4104cf1898193993408bdf
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
QLocale::system() was not making use of QLocaleFormat::Narrow, always
treating it in the same way as QLocaleFormat::Short.
This patch fixes the issue for day and month names.
The implementation falls back to CLDR if system locale fails to
provide some data.
Pick-to: 6.2
Task-number: QTBUG-84877
Change-Id: Ia37e59dbf02d7a5e230f2767d294b9ab7de37f33
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
System headers were jumbled in with Qt headers. Separate those out and
use standard names for Qt headers. Tidied some #if-ery.
Change-Id: Ic8c61797303567eeaef48e2560e91924ddb380f0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLocale and QString tests had copies of a TransientLocale; we've
recently improved the QLocale one. Rather than duplicating those
rather complicated improvements, finally share a common version.
In the process, I noticed that setlocale() only returns the prior
value when passed nullptr as the new value; so rework the
implementation to get that right, so that it now correctly restores
the prior locale. That, in turn, means there's now a later call to
setlocale(), when we actually set the changed setting, which may
invalidate the earlier return; so copy it to a QByteArray before the
second call.
Included Ivan Solovev's improved version of how to reset the locale,
since TransientLocale needs it.
Pick-to: 6.2
Change-Id: I4cb1efbda42f0e2cdd934e04b3b3732ce0f45a06
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The name of is_utf8_encoded type seems to imply that QByteArray and
const char * contain UTF-8 encoded data. This is not always the case.
When used with QByteArray API, those types are handled as containing
ASCII-only. It's only when used with APIs of other classes (QString,
QLatin1String) they are handled as UTF-8. This renames the check to
is_bytearray_like_v and clarifies its usage. No need to handle
QUtf8StringView this way because it works just fine with the current
testcases.
While at it, also remove unused is_latin1_encoded trait.
Task-number: QTBUG-92021
Change-Id: I44e40cf3c0dd07e5b3cf1e47ff7a04f1c548aa97
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The existing a, ap, A and AP specifiers all force the case of the
formatted am/pm indicator. The indicators returned by QLocale's
amText() and pmText() methods are those given in CLDR, with no case
coercion. Application writers may reasonably want these strings used
verbatim, rather than having to chose a case and impose it on the
locale's indicators, in defiance of national custom. For example,
while en_US uses upper-case indicators by default, cs_CZ uses
lower-case ones. An application author writing a time format has been
forced to chose which of these locales to be wrong in.
Add support for aP and Ap specifiers, whose mixed case indicates that
the locale's case is to be respected. Amend an existing test-case of
tst_QLocale's formatDateTime() that used Ap (expecting, of course, an
upper-case indicator followed by a stray p) to now expect the
locale-appropriate-cased indicator. Extend formatTime() to test cases
using aP and Ap, to illustrate the difference between en_US and cs_CZ.
Rework QDateTimeParser to also support the new format specifier. This
required expanding its Case enum, used by the getAmPmText() method,
which was formerly shared with QDateTimeEditPrivate; however, as that
class no longer makes any reference to this method, it and the enum
can be made private, allowing a systematic clean-up of their use.
Added test-cases for both serialization and parsing; and amended some
existing parsing tests to verify am/pm indicators are matched
case-insensitively.
[ChangeLog][QtCore][Important Behavior Changes] Time formats used by
QLocale, QTime and QDateTime's parsing and serialization now recognize
'aP' and 'Ap' format specifiers to obtain an AM/PM indicator, using
the locale-appropriate case for the indicator, where previously the
author of a time format had to pick a case that might conflict with
the user's locale. For QTime and QDateTime the locale is always C,
whose indicators are uppercase. For QLocale, the case will now match
that of amText() or pmText(). Previously, 'aP' would have been read as
a lower-case indicator followed by a 'P' and 'Ap' as an upper-case
indicator followed by a 'p'. The 'P' or 'p' will now be treated as
part of the format specifier: if the prior behavior is desired, either
use 'APp' or 'apP' as format specifier or quote the 'p' or 'P' in the
format. The prior 'a', 'ap', 'A' and 'AP' specifiers are otherwise
unaffected.
Fixes: QTBUG-95790
Change-Id: I26603f70f068e132b5c6aa63214ac8c1774ec913
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Some backends were missing support for standalone days and months,
also the standaloneDayName() implementation was always using the
same codepath as dayName().
This patch fixes the issues.
Support for narrow format will be added in the following patch.
Task-number: QTBUG-84877
Pick-to: 6.2
Change-Id: I38ee06342cafab544e3c69097bd0e6ae68e85645
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It was previously calling setlocale(), which makes no difference to
the Unix backend for the system locale, since that's based on
environment variables (that would normally be used to get default
values for the various setlocale() categories, but only the first time
each is asked for). So, on Unix, set the environment variable, too.
It's also necessary to instantiate a QSystemLocale instance
transiently to trigger a refresh of the system locale data.
Pick-to: 6.2
Change-Id: If92e44053f9021e96c814f4b289f4fadaa7027e0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This is the kind of loop that the autovectorizer is pretty good
at, but this is really just a type of memchr, so help dumber
compilers and build modes without vectorization.
Drive-up fix the style of the test code.
Change-Id: Ie72b0dd0fbe84d2caae0fffd16a022a35fa24c17
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We have previously been using the standalong (nominative) month names
both when asked for that and when asked for the plain (genitive) month
name, probably because there was no LCTYPE value for the
latter. However, MS's docs for the standalone values do contain a
comment telling us how to get the genitive names.
Rename the old monthName() to standaloneMonthName() and add a
monthName() that calls GetDateFormat() suitably, as described by the
MS doc.
Pick-to: 6.2 5.15
Fixes: QTBUG-92018
Fixes: QTBUG-86279
Change-Id: I27f63198c3a15b792683f476d2019078b0860f99
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The testcase was disabled with no explanation in
2766322de3 but seems to work fine.
Change-Id: Ibc22a4ffb756604e22c1f2cf1165919c1d7f1212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Now that we don't need '\0'-termination on the data, this is possible.
Moved QByteArray's tests to tst_QByteArrayApiSymmetry and added some
more test-cases.
[ChangeLog][QtCore][QByteArrayView] Added numeric parsing methods.
Change-Id: Ic0df91ecfe5dbf6f008d344dd0464d7927f32273
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove third-party code in favor of STL. Implement (for now)
strtou?ll() as inlines on strntou?ll() calling strlen() for the size
parameter. (This is not entirely safe, as a string lacking
'\0'-termination but with at least some non-matching text after the
numeric portion would formerly be parsed just fine, but would now
produce a crash. However, strtou?ll() are internal and callers should
be ensuring '\0'-termination.)
Task-number: QTBUG-74286
Change-Id: I0c8ca7d4f6110367e93b4c0164854a82c5a545e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When a needle has length 1 (because it's a QChar/char16_t, or because
it's a string-like of length 1) then an ad-hoc search algorithm is
used. This algorithm had a off-by-one, by not allowing to match at
the last position of a haystack (in case `from` was `haystack.size()`).
That is inconsistent with the general search of substring needles
(and what QByteArray does). Fix that case and amend wrong tests.
This in turn unveiled the fact that the algorithm was unable to cope
with 0-length haystacks (whops), so fix that as well. Drive-by, add a
similar fix for QByteArray.
Amends 6cee204d56.
Pick-to: 6.2
Change-Id: I6b3effc4ecd74bcbcd33dd2e550da2df7bf05ae3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Relying on the fact that a given capturing group captured a null string
doesn't allow users to distinguish whether a capturing group did not
capture anything, or captured a null substring (say, from a null subject
string).
Perl allows for the distinction: the entries in the @- and @+ arrays are
set to values in case there is a capture, but they're undef otherwise.
PCRE2 gives us the information already in the results "ovector", but
it was simply not exposed to QREM users. So, expose it.
[ChangeLog][QtCore][QRegularExpressionMatch] Added the hasCaptured()
family of functions to know if a given capturing group has captured
something.
Change-Id: Ic1320933d4554e2e313c0a680be1b1b9dd95af0b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
An oversight in the code kept the algorithm in the GB11 state, even if
the codepoint that is being processed wouldn't allow for that (for
instance a sequence of ExtPic, Ext and Any).
Refactor the code of GB11/GB12/GB13 to deal with code points that break
the sequences (falling back to "normal" handling).
Add some manual tests; interestingly enough, the failing cases are not
covered by Unicode's tests, as we now pass the entire test suite.
Amends a794c5e287.
Fixes: QTBUG-94951
Pick-to: 6.1 5.15
Change-Id: If987d5ccf7c6b13de36d049b1b3d88a3c4b6dd00
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
