Variables starting with 'arg_' usually are the result of the
cmake_parse_arguments call. It's better to not use them for the regular
variables for readability.
Change-Id: I4054c63d3e48b2a27d8a632cd8908a59302afa47
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
HEADER_MODULE argument is passed to qt_generate_module_pri_file from
the qt_internal_add_module function, but the property means that the
module is an interface library. So it makes sense to replace this
argument with the reading of the target TYPE.
Change-Id: I1d8cd2ff732f526975cde6bdd4783fee44c8bd98
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We current have lots of redundant state bindings for things like
SamplerState that could reduced by checking if the state is already set.
ShaderResourceBindings are fairly involved to cache since they are done
in batches. This patch stores the current ShaderResourceBindings state
and checkes the current state before setting a new one.
Change-Id: If15ebd2b8b14b016f492d881197e423773c30ef7
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
For QT_BUILD_INTERNAL, mark the flag constinit, because tests may want
to set it (which they better do before Qt spins up threads, because
otherwise this non-atomic flag runs into UB (data races)).
For non-QT_BUILD_INTERNAL, mark the flag constexpr, so dead code
elimination can do its job.
Inconsistently, of the two readers of the flag, one was ifdef'ed on
QT_BUILD_INTERNAL, while the other wasn't. Settle on exposing both,
which increases the compiler coverage of the code.
Pick-to: 6.4
Task-number: QTBUG-100486
Task-number: QTBUG-100485
Change-Id: I6e041359b8214b40d80eefa92c26422aada3eb59
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QStringView lacks the equivalent of find_first_of, so use string_view
for now.
Fixes an unnecessary QString ctor/dtor call, as well as the
int/qsizetype mismatch, looking for which I found this code.
The function can now be properly noexcept.
Task-number: QTBUG-103531
Pick-to: 6.4 6.3
Change-Id: I1198c082a2ee0addbe7c0d2192073b017d9f8dd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were two problems:
1. The cast to uint truncates the input qsizetype bufferSize mod
UINT_MAX, which, if the original value was qsizetype(UINT_MAX) + 1,
would yield a false negative check, so remove the cast.
2. The multiplication of the input string size with
sizeof(QCharAttributes) looks like it could overflow, esp. on
32-bit platforms. It can't, because sizeof(QCharAttributes) == 1
atm, but the next attribute that's added to the struct will turn
that into sizeof 2, so play it safe and use division on the LHS
instead of multiplication on the RHS to avoid this arithmetic 101
antipattern.
Task-number: QTBUG-103531
Pick-to: 6.4 6.3
Change-Id: Icae3bea1c3cb52a235b8aae181af35c86c3f5d6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are still problems with platforms-specific APIs that are 32-bit
only (cf. QTBUG-105105), but this patch finishes the port of the
cross-platform parts of QStringConverter.
None of these changes have a user-visible effect. They just avoid the
Code Smell that int has become since Qt 6.0.
Pick-to: 6.4
Task-number: QTBUG-103531
Change-Id: I267e2e1268a18c130892fa2fd80d1b5dabb3d9b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Int variables are a code smell these days, so make the narrowing
conversion (from ptrdiff_t to int) explicit and add a comment.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-105105
Change-Id: Ia4e14f1cc132ca36d15e9684bfcb4605d7b9251f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
GCC 13 warns:
qstringconverter_p.h:29:6: warning: identifier ‘char8_t’ is a keyword in C++20 [-Wc++20-compat]
29 | enum char8_t : uchar {};
Fix by calling the replacement qchar8_t (and making it a typedef to
char8_t when the latter is available).
Pick-to: 6.4 6.3 6.2
Change-Id: If59a9d55667bf1f5245e3a34189687995b000daa
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Building on 15a80cf8a9, this patch fixes
the case where there are more than INT_MAX occurrences of the
lowest-escape-sequence number, as in
QString("%0").repeated(qsizetype(INT_MAX) + 1).arg(42);
by replacing the corresponding int variables with qsizetype ones.
Task-number: QTBUG-103531
Pick-to: 6.4 6.3
Change-Id: I6f4593a86d8d605031bc1d6520a247676091b2c2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Developers can add to Emscripten's EXPORT_RUNTIME_METHODS
by defining their own using:
QT_WASM_EXTRA_EXPORTED_METHODS
Which will add on to Qt's default exported runtime methods
of UTF16ToString,stringToUTF16
for cmake:
set_target_properties(<target> PROPERTIES QT_WASM_EXTRA_EXPORTED_METHODS "ccall,cwrap")
or
set(QT_WASM_EXTRA_EXPORTED_METHODS "ccall,cwrap")
for qmake:
QT_WASM_EXTRA_EXPORTED_METHODS = ccall,cwrap
Done-with: Mikolaj Boc
Fixes: QTBUG-104882
Pick-to: 6.4
Change-Id: I9678bdb7b077aaa8527057212ea4e161c0be0b60
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also replaced qMin() uses in qnumeric.h with QtPrivate::min().
Including qassert.h in qminmax.h leads to indirect include of qglobal.h
(through qcompilerdetection.h), which in turn leads to qMin() declaration
not being available at the point the compiler sees qFuzzyCompare()
definitions in qnumeric.h. This makes the headersclean build fail.
Task-number: QTBUG-99313
Change-Id: I824422698b06f94a4a62e2f19d4507c87f90334e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
And move the related checks from qglobal.cpp to qtypes.cpp.
This requires removing the unnecessary include statement for qglobal.h
from qprocessordetection.h, that now needs to be included in qtypes.h.
Task-number: QTBUG-99313
Change-Id: Ifd72b956326909be82c162f37854cad0878010e2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of casting to int, cast to qlonglong, which is guaranteed to
be able to hold all qsizetype values.
Task-number: QTBUG-103531
Pick-to: 6.4 6.3 6.2
Change-Id: I3e89892defd091fa6ef305b8ed5c3819a2cc13da
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The facilities of qunicodetools.cpp are not limited to the GUI thread,
so initialization must be thread-safe.
The old code wasn't, though, and contained several data races
- non-atomic initialized was read while another thead may write it
- th_brk and th_next_cell were read while another thead may write them
Fix by using Double-Checked Locking. This also prepares the code for
an eventual port to th_brk_find_breaks() (th_brk is deprecated).
The function pointers don't need to be atomic, because all reads from
them are guaranteed to happen-after the writes to them (as long as all
users call init_libthai() and don't proceeed if it returns false; this
could be ensured by returning a struct with the function pointers from
init_libthai() instead of maintaining them as statically-visible
globals, but that's outsize the scope of this patch).
As a drive-by, remove a pointless static_cast<int>(~~int expression~~).
Fixes: QTBUG-105543
Pick-to: 6.4 6.3 6.2
Change-Id: I492acd7e9a257e5c4b91f576e9bc448b6bb96ad1
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Libthai's th_brk() takes the breakpoints array lengths as size_t, so
use that.
This still doesn't fix thaiAssignAttributes() for ≥ 2 Gi characters,
because th_brk returns break positions in an array of int, thus
limiting any results to the first INT_MAX characters. Created
QTBUG-105541 to track this.
Task-number: QTBUG-103531
Pick-to: 6.4 6.3 6.2
Change-Id: Iba468cc9389f4533401bc18dd326c4ca7e85a5da
Reviewed-by: Lars Knoll <lars.knoll@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Libthai's th_next_cell takes and returns lengths as size_t.
- pass size_t, not qsizetype (the value can never be negative)
- receive size_t, don't cast to uint
As a drive-by, scope variables tighter.
Task-number: QTBUG-103531
Pick-to: 6.4 6.3 6.2
Change-Id: Ib1eeb1f0e8974ee8b0f88d080d06136b307c324f
Reviewed-by: Lars Knoll <lars.knoll@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This caused it to be unavailable in metatypes and thus to not work in
qml.
Change-Id: I22b6fa3b43fe609bdc1167dc081290eb93845491
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This fixes the flakiness seen in OpenSUSE KDE/X11 desktop.
Fixes: QTBUG-70590
Task-number: QTBUG-105177
Change-Id: I7c2431e58b2a60ea04e26d4e70c0f2867d544ff2
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Currently, arguments passed to the app through applicationArguments
extra bundle treat every space as an argument separator. This then
doesn't handle the case where an argument is a space separated quoted
multi-word. This is more apparent when androidtestrunner is passing
test arguments to the app where an argument can be a test case with
a data tag that contains a space, which then is treated as two separate
tag names.
This change makes sure that androidtestrunner quotes each argument,
and the app doesn't split the arguments list by spaces, but rather
passed the argument string directly to c++ where
QProcess::splitCommand() is used to get the correct set of arguments
that will be passed to main().
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104730
Change-Id: I45d8ca979d90f2a383c84623f0eb2eec29bba727
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
When loading a Qt CMake project in an IDE like Visual Studio, many
Qt-internal targets are visible, right next to the user's targets. This
is inconvenient and confusing.
Use CMake's FOLDER concept, and put Qt-internal targets into a dedicated
FOLDER.
For that we introduce the new global property QT_TARGETS_FOLDER that,
analoguous to AUTOGEN_TARGETS_FOLDER, is the folder name for Qt-internal
targets. By default, it's not set, nor is folder support enabled.
Change qt_standard_project_setup() to
- enable folder support
- initialize QT_TARGETS_FOLDER if unset
- initialize AUTOGEN_TARGETS_FOLDER to the same value if unset
Set the FOLDER property of qtbase's internal targets for user projects
to the value of QT_TARGETS_FOLDER.
Task-number: QTBUG-99808
Change-Id: I880ac7731f88faa83a384dcdec98b1b88ac6cc2e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The current qt_internal_extend_target interface expects that the caller
will pass the HEADER_MODULE argument on each call. This is not correct,
since the argument doesn't affect the target internals, but only help to
decide how to modify the target according to its type. The target type
meanwhile can be always read from target properties. So this solution is
more consistent.
Change-Id: Ie84a2226ceb71cb5272670e5d43bdfc7a101360a
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This requires moving the include statement for qassert.h in qglobal.h
up, outside the #if defined(__cplusplus) check, to make the macros
available when __cplusplus isn't defined.
Also move qt_noop() up, before the include of qassert.h, this will later
go to a separate header.
Task-number: QTBUG-99313
Change-Id: I0f3f1ca77819a86623eebaf8adeba226c190fd37
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
But keep qtnamespacemacros.h for now, some modules include it
explicitly, so need to change those to include qtconfigmacros.h first.
The plan is to move QT_SHARED, QT_STATIC and QT_CONFIG macros there too.
Change-Id: I945b3dfffbd9cd394a6cf42a36df6657d1703d5b
Pick-to: 6.4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTranslator builds a list of "candidate" names in order to find out
the translation file to load. Part of the name comes from the UI
languages, as determined by the QLocale object passed to load()
(via QLocale::uiLanguages()).
On UNIX this list of languages is processed by adding a lowercase
version of each language. In other words, if the list is something
like:
{"en-Latn-US", "en-US", "en"}
then it is changed to contain:
{"en-Latn-US", "en-latn-us", "en-US", "en-us", "en"}
(The last element is not needlessly duplicated, since it's already
fully lowercase.)
I am not sure why this is done only on UNIX: the commit introducing
this behavior predates public history. If I have to take a guess, it's
done because the language is then used to assemble a file name that
QTranslator tries to open. On UNIX file names are case sensitive, so
if the translation file is called "translations_en_us.qm" it would
fail to load under a "en-US" locale (the "-" -> "_" processing is done
later).
But what about Windows? In principle, turning the names in lowercase
is not necessary as Windows' filesystem is case insensitive; a
translation file called "translations_en_us.qm" will still be loaded
if opened as "translations_en_US.qm"...
... *except* if the file is in the resource system! In that case,
filesystem access is still case sensitive, and will fail to load the
translation file (which instead would load just fine on UNIX).
Plug this silly cross-platform difference by also lowercasing on
Windows.
Change-Id: I2573721e33d9da08f60a5bb56e35e4553cbe4efe
Pick-to: 5.15 6.2 6.3 6.4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
... and simply use the public methods of the base class instead.
We can't completely remove it, so we just add it to removed_api.cpp
By removing the setQuery() method in the QSqlTableModel class, we
open up name lookup to the base class, where the const ref overload
was already deprecated in 14f9f00fdb,
and the proper replacements were provided.
[ChangeLog][QtSql][QSqlTableModel] The setQuery(const QSqlQuery &)
method is removed, because QSqlQuery cannot be copied correctly.
Use the public setQuery() overloads of the base QSqlQueryModel class
instead. They allow passing of QSqlQuery by rvalue ref, or creation
of the query by specifying query string and database object.
Task-number: QTBUG-105048
Change-Id: I6f47067af6b4769578d4de9dbdbbbc7504ddf4ad
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Returning QSqlQuery instance by value does not make much sense,
because it cannot be copied correctly. Also, its copy constructor
and copy-assignment operators are deprecated from Qt 6.2.
[ChangeLog][Potentially Source-Incompatible Changes][QSqlQueryModel]
QSqlQueryModel::query() now returns a reference to the const QSqlQuery
object associated with the model.
Task-number: QTBUG-105048
Change-Id: I04a2aa377b17d770d2a9855040f8c730190484d8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... to prevent compilation errors when built with
QT_DISABLE_DEPRECATED_BEFORE >= 0x060200
This commit amends 14f9f00fdb
Task-number: QTBUG-105048
Pick-to: 6.4 6.3 6.2
Change-Id: I33c586508353ccb4c0af3f5da0cdaf9abe9f590e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Use activateWindow() that is documented as the right way to raise a window.
Task-number: COIN-892
Change-Id: Ic9aadee0d3a526fd8e46e5b1099b5b0861700207
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
I can't reproduce the test failing after hundreds of iterations on
OpenSUSE, and the test hasn't flaked at all in our CI in the last 6
months according to our dashboards.
Fixes: QTBUG-70612
Change-Id: I2397f3db5caf97f674de7d75fd99bd14c14166a4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
I can't reproduce the issue after hundreds of iterations on OpenSUSE,
and the test hasn't flaked at all in the last 3 months according to our
dashboards.
Task-number: QTBUG-66371
Change-Id: I9c4daf851e09fbcb47a6ab39418e7b213ccd9dfe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Changed the behavior in which key events are delivered to targets.
Before the change, in case of a EMSCRIPTEN_EVENT_KEYUP event, the key
code and text were not filled in correctly as they should. This resulted
in wrong behavior when event targets expected these codes being available.
Fixes: QTBUG-105213
Change-Id: Ie66b5d6d395d08af655fcb00f1f616ad43d6bea4
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
While dropping the extra "does", rewrite as "doesn't"
as common contractions are preferable in particular in
negations. Reflow the remainder of the paragraph.
Fixes: QTBUG-105517
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I1ad2d5ca753cb1d3a38cf96bdd6e52d2af80151b
Reviewed-by: Andreas Eliasson <andreas.eliasson@qt.io>
The qlalr outputs need to be added to the consuming target.
Change-Id: I9600729103298cf7e0a712d5f3dc49c5f4c729f5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
...if the double-conversion CMake package cannot be loaded.
The find_path call must specify the header exactly as it is included.
The select_library_configurations call always failed, because the
command expects the presence of DOUBLE_CONVERSIONS_LIBRARY_DEBUG,
DOUBLE_CONVERSIONS_LIBRARY_RELEASE, or both.
Upstream double-conversion's MSVC build system does not specify a naming
scheme for the debug build, and there are no debug/release binaries to
download that suggest a naming scheme. Therefore we assume the usual
'd' suffix for the debug library like we do everywhere else.
Lastly, we need to set DOUBLE_CONVERSION_INCLUDE_DIRS.
Fixes: QTBUG-105501
Pick-to: 6.2 6.3 6.4
Change-Id: I71ff5238f353541b8bf5ac6792b86134deba20d1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These headers were generated before extracting qoverload.h. This amends
ff8de321e2.
Change-Id: I8f0e8dc3725f9776b8f6dc96782c97b0b5566b9d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QVariant(QMetaType::Type) is deleted since Qt 5 (sic!). Suggest usage of
the constructor taking a meta-type instead.
Pick-to: 6.2 6.3 6.4
Change-Id: I50949dac9dfc35c80108debdeabc791afe0998b6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Change listing:
- change names of abbreviated structures/variables (e.g. KeyTbl
-> WebToQtKeyCodeMappings)
- add constants for commonly used magic strings ("Dead", StringTerminator)
- use common idioms for common tasks (find_if, std::optional)
- use binary search as facilitated by the sorted array instead of a full
search - this optimizes the code at no cost
- remove dead code (double translateEmscriptKey in
QWasmEventTranslator::getKey, remove sticky dead key support as it was
write-only, remove the dead setIsMac and g_usePlatformMacSpecifics,
remove the dead getWindowAt).
- cull the public interface on QWasmEventTranslator as some functions are
only used internally (translateEmscriptKey)
- simplify / shorten functions by short-circuiting
- modernize definitions (= default)
- auto-format the changes using clang-format
The file is now much easier to read and understand.
Change-Id: I5ea2bdafd9b9abc009feeb5516ddd87fb0ca212e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
