10240 describes the first official non-preview Windows 10 SDK. 10586 was
the SDK for the first November update.
Change-Id: Ieb61b944295946eab594b3c7bf234155a67b752e
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This allows users to add mobile specific features. Also it implicitly
enables support for continuum on Windows 10 Mobile.
Change-Id: I965123722f46df6e84fd279c3bfce478c1172632
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Commit 6e6f27b6 made it possible to set the PKG_CONFIG variable using
CROSS_COMPILE as a prefix. The problem with that solution is that it makes
pkgConfigExecutable() skip the environment setup for pkg-config as well,
as it expects the pre-set command to be self-contained - which it isn't.
To avoid this problem we need to store the pkg-config define in the
device spec in a separate variable.
Change-Id: Id8ae7fb03d9253be55840e23fe73b30815ee86c3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
most module project files define two logical modules: a public one and
the corresponding private one. these are really separate modules as far
as qmake is concerned (even though the private one contains just
headers), and consequently have separate dependencies - QT and
QT_FOR_PRIVATE.
as public modules cannot depend on private ones, all private
dependencies would have to go to QT_FOR_PRIVATE, and a dependency on the
respective public module would have to be added to QT. this would be a
bit tedious, so we have a convenience feature which allows putting
private dependencies into QT, but automatically "downgrades" them to
their public counterpart when creating the public module's .pri file.
however, we failed to put verbatim versions of these private
dependencies into the private modules, which meant that these
dependencies were not pulled in transitively by the private modules'
users.
note that this entirely unrelated to QT_PRIVATE - this one defines the
private (non-propagated) dependencies of the module's implementation,
i.e., the libraries (and headers) that are not part of the link
interface. there is no QT_PRIVATE_FOR_PRIVATE, because there is
obviously no point in assigning the dependencies to a particular
logical submodule when neither one inherits them as far as the qt
module system is concerned.
Change-Id: Ib056b47dde3341ef9a52ffff13efaf8ef8e6817b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
save the actual library/framework name and framework paths in the .pri
file instead of computing them again at use time in qt.prf.
qt_no_framework_direct_includes inherently requires a use-time decision,
so this ugliness remains.
Change-Id: I09b2775e7d8e1d52e3af0d663e1babde10ae4814
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Without this, any test executable requiring a plugin path from
the environment's QT_PLUGIN_PATH will fail to run since the path is
overwritten when generating the 'make check' command, for example:
QT_PLUGIN_PATH=/path/to/qt/plugins \
LD_LIBRARY_PATH=/path/to/qt/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH} \
./test_foo
A prepend config option is used for *PATH to preserve the envvar
value, so use the same option for QT_PLUGIN_PATH. The command above
then becomes:
QT_PLUGIN_PATH=/path/to/qt/plugins${QT_PLUGIN_PATH:+:$QT_PLUGIN_PATH} \
LD_LIBRARY_PATH=/path/to/qt/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH} \
./test_foo
Change-Id: I69b43327974915eae52f299fc4001effe93a491a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
one reason to do that is some users' persistence in destroying their
non-prefix builds by trying an installation.
another reason is the fact that qt.pro's relative_qt_rpath is triggered
by the presence of an install rule for the target, which is of course
not helpful when the install dir is bogus.
Task-number: QTBUG-48406
Change-Id: I75f3940be79fcb5b86e34b975b789692423c92cb
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the main objective was to fix the bootstrap modules in framework builds.
bootstrapped modules which "borrow" headers from "proper" modules can
specify this in a clean way now.
a side effect of this is that the bootstrap-dbus module now has its own
syncqt call.
most includepath-related setup from qt_module_pris.prf was moved to
qt_module_headers.prf.
Change-Id: Ie0d8192cfac1a8cdae0ddd0bc0cd8c3092b1e85b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It only needs stdin now, instead of stdin plus a separate file containing
a list of file names.
Change-Id: I9f3db030001e47e4a4e5ffff1425b76884cc7ca0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
qtAddToolEnv() (via qtPrepareTool()) does not write the tool wrapper
scripts during build passes, while qt_docs.prf (which calls it for qdoc
and qhelpgenerator) was loaded only during build passes. the consequence
was that the makefiles tried calling non-existent scripts.
amends 5418d77a1, sort of.
Change-Id: I64ab573495ca339be4c7b5e8c6848b298b6cb605
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
now that we don't create .pc files for private modules any more, the
conditionals cannot be nested.
amends 6c5d227da, partially reverting aa20e7f9d.
Task-number: QTBUG-49763
Change-Id: I2578c83e0c767b6533abdb26bf4e8bcc8c416ef1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
judging by the history, this was only ever a workaround for poor rpath
handling. we're supposed to be over that.
Change-Id: I85601493a05a76ead999e707a2d2e9a430610981
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
proper prefix builds don't have the redundant .dlls in bin (the copy
step is simply omitted), so this is broken. the change would have to be
done atomically with making DLLDESTDIR sane.
This reverts commit 9b2e98245a.
Task-number: QTBUG-50065
Change-Id: I9ce0a2d1147a1a2d4bd2f22e619d5c737864a637
Reviewed-by: Romain Pokrzywka <romain.pokrzywka@gmail.com>
Reviewed-by: Tim Blechmann <tim@klingt.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
this is just an optimization/clarification: variables which are known to
be never empty (like PATH) can be extended with less convoluted code.
Change-Id: Ib365bbec8301673ed1c874979b4de19bc983dab1
Reviewed-by: Romain Pokrzywka <romain.pokrzywka@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
the primary purpose is making env var prepend mode work for unset
variables on windows. this is achieved by using a conditional and delayed
variable expansion. however, the latter is disabled by default and can
be locally enabled only in batch files. therefore, write wrapper scripts
and substitute them for the actual commands. we do this also on unix,
both for consistency and simply because the commands look much less
confusing.
this change is slightly backwards-incompatible, as invoking
qtAddToolEnv() multiple times on the same command will now make a total
mess. also, invoking it on a command that contains 'make' macro
expansions isn't a good idea, so testcase.prf needed an adjustment. the
function is an undocumented internal, so Nobody Should Care (TM).
this also reverts 80ebedecf9, as it's obsolete now.
Change-Id: I8394b77868b495abcf27b688996ca74c40b80994
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
That API has been available for WinRT and Windows
Phone for some time now. By using it to get the
machine name and for hostname resolution we can get
rid of some winrt-only code and use qhostinfo_win.cpp
on WinRT and Windows phone as well.
Additionally the required capability was added to
tst_qhostinfo so that this auto test can be run without
any manual editing.
Change-Id: I63fa5521bf8cdb0c919bd5a0100ea977c865622a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
CMP0054 changes CMake behavior wrt. interpreting quoted arguments in
if() statements. This change ensures that CMP0054 dev warnings are
never emitted no matter how polluted the environment, e.g. even
if the variable ${5.5.1} is defined and no matter whether CMP0054
is set to OLD, NEW or undefined.
Change-Id: Iee008497b333e2db23fb1adbf8b02252314ffa8a
Reviewed-by: Kevin Funk <kfunk@kde.org>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Recent versions of Qt have apparently added sufficient numbers of
headers that the command lines used to spawn a custom header-
parsing tool, started overflowing Windows' maximum command-line
length.
This change restructures the mechanism to use a GCC-style command-
line arguments file rather than passing filenames all directly
in the argv[] vector.
Although QNX is the usual ELF target whose cross-build is supported
on Windows, the mechanics introduced in this patch happen to affect
all other ELF Unix systems' builds too.
Change-Id: I5a7383cf9f2ebf9dffde8dbfdcdeca888265e085
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the variable is later re-used by qtPrepareTool(), so the tools used to
build the tool would get excess variables passed.
Change-Id: Ib1bdd2211b4a8615e2be9ba0310822f373f5efb0
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
qtPrepareTool() does it anyway, so this saves repeated manipulations.
for now, this is just nicer, but soon it will be a requirement.
Change-Id: I5184e0e4597c6d5a4d7dd4cc4d81e7f742a79fc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QFINDTESTDATA is already prepared to find it there.
Change-Id: I467392786ce6bcfbf1bd0b6079f60c9df06834b1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
A minimal device spec that can be used to build for arm devices.
Change-Id: I4c9949d8cc59ad534fc7617034f6beb40d6a987e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If CROSS_COMPILE is set on a Debian multiarch platform, then PKG_CONFIG
should be set the same way as the other cross compilation tools.
Change-Id: Id359a6bbdcbf8a136a0268a82301fc086a2adcfe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
no idea why it was limited to linux. the variable is already empty on
platforms which don't support it anyway. also, for plugins, it's
consistently enforced as well.
Change-Id: I117f4988a2e301ca98cdc088188d6f8c44ea0ba5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This is needed to be able to use Qt (with dynamic ANGLE) in a plugin
while the host runs a different version of Qt (and ANGLE).
In addition to changing the LIBEGL_NAME and LIBGLESV2_NAME variables
you also need to update the value of the LIBRARY definition in the
.def files for ANGLE:
qtbase/src/3rdparty/angle/src/libGLESv2/libGLESv2[d?].def
qtbase/src/3rdparty/angle/src/libGLESv2/libEGL[d?].def
Task-number: QTBUG-48431
Change-Id: Idd00d039ba3e20cc0ec7496bee36ed1c90383b0d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
[ChangeLog][Platform Specific Changes][OS X] Configure with -no-rpath
will now yield Qt dynamic libraries and frameworks with an absolute
install name (based in -libdir).
OS X package managers like Homebrew install Qt in a fixed location. This
change simplifies deployment for such package managers and is consistent
with the default expectation on Apple platforms for libraries with a
fixed location to also have absolute install names.
While a relocatable installation (the default) also works in this
scenario, it requires all software that depends on Qt to be aware of
this and to embed a suitable RPATH into application binaries (which is
not automatic for non-qmake builds). This might not be true for some
select fallback search locations, but as package managers on OS X tend
not to use those, embedding an RPATH becomes practically mandatory. In a
default Homebrew installation, Qt is configured such that the frameworks
end up in /usr/local/Cellar/qt5/<version>/lib and that will be later
symlinked to /usr/local/opt/qt5/lib, both of which are not searched by
the dynamic linker by default.
Task-number: QTBUG-48958
Change-Id: I4395df98771e06a2ce8a293d11dc755bdc50757f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Visual Studio version specific changes have been added to msvc-
desktop.conf which is not used in WinRT or Windows Phone related builds.
Hence take a similar approach to gcc and introduce msvc-base to be used
by all configurations for common settings.
For WinRT this will only be applied to msvc2015 and later on to not
introduce any regressions or behavior changes for previous versions.
Change-Id: Ib1a4d539d46d788470c00cb5969fee74a803bd67
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
don't install the module .pri file into qtbase even when doing a
non-prefix build.
this has no effect on modules built as part of a top-level build, as
they announce themselves via .qmake.super anyway.
however, modules built separately become unavailable unless QMAKEPATH
or QMAKEMODULES is set. this is deemed not relevant by the original
audience of this feature (the qtwebkit team).
Change-Id: I14c170b2c5dbb99608939aef1a541563d5b755d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
longer term, the redundant .dlls from the libdir will hopefully
disappear. short term, this is a workaround for CI brokenness.
Change-Id: Ia30173355f3aca222d4ca40e7a38c2cf535bbc03
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The xcodebuild tool only supports the install action for devices, not
for the iOS simulator platform.
Change-Id: I47e8bb7d44962bd4a433a314fa9d315ed3683ca6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
qt_framework and {app,lib}_bundle imply darwin, so there is no point in
testing for it.
Change-Id: I9fe48c26c8e271a5575b17e92df8674d3c3a3204
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
CONFIG+=qt_framework is actually put into qconfig.pri, so it's always
set in framework builds. things (sometimes) worked only by virtue of the
qt_framework checks being in "else" branches of "static" checks. use
lib_bundle instead, which triggers the actual framework build anyway.
amends b72d1db44.
Change-Id: Ib725c43476d9fb38bad940ce09905d29ff3edfa3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
While all apps need to have internetClient as a capability, the option
to provide further capabilities via qmake has been removed in the
template.
Instead we add the required items inside the prf and keep the manifest
template as generic as possible.
Task-number: QTBUG-49504
Change-Id: If26b9da277a5269a57b34e74c146b40b1b64d091
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
frameworks are currently broken anyway, and we don't create .pc files
for the private part of public modules, so creating them for entirely
private modules is just inconsistent.
Change-Id: I98da8def73d72ac69b9b246687dce6b1fd150f61
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
the projects which use full mode with the named modules have them.
Change-Id: I3b9383d1cc2b43411c25690a5e35e7e84a55aa23
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
the check whether a module depends on itself should be done by the code
which *builds* modules, not which *uses* them.
the check whether a plugin tries to use itself seems kinda pointless in
the first place, so just remove it.
Change-Id: I89b357dae7d7979d131b6824f197e7088047272f
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
that way other modules can use the headers without hacks.
this required making the base directory for paths in headers.pri
configurable in syncqt.
Change-Id: Id35cfe05bcf4c576d3f2d0d8d09590a5e23d21d3
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
there is nothing to link with it anyway.
Change-Id: I2e942d24bb39855b3682f3e8d85cb6abca75cb61
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
instead of building host tools always in debug mode, follow the overall
build type, and provide an option to override it.
this supersedes the pre-existing -optimized-qmake option.
however, that option never existed in the windows configure, and this
legacy continues as far as qmake is concerned (msvc builds of qmake are
always somewhat optimized, but not mingw builds).
Change-Id: I42e7ef1a481840699a8dffff13fec2626af19cc6
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
