In this case, the previous action's tip is still displayed
when the cursor moves from one action with tip to another action
without tip.
Fixes: QTBUG-89082
Pick-to: 5.15
Pick-to: 6.0
Change-Id: I0a00595dc3d716725678487be9cbb363c4d3b392
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If a default font was not registered for the widget's class, it returns the default font of its nearest registered superclass.
Fixes: QTBUG-89910
Pick-to: 5.15 6.0
Change-Id: I6e6b2c6a0044462f84db9f76a03be0c6cfaaae8e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
setTabOrder was not considering the case, when a child widget has
its focus proxy set to its parent widget. This happens, for example,
for the QLineEdit that is nested inside the QAbstractSpinBox.
For such cases the lastFocusChild was calculated incorrectly, and, as
a result, such child widgets were not correctly positioned in the
focus chain. This could lead to an error while backtabbing.
Here is a brief example. Suppose we have 3 widgets arranged like this:
auto spinBoxOne = new QDoubleSpinBox;
auto spinBoxTwo = new QDoubleSpinBox;
auto button = new QPushButton;
Then the default widget focus order is:
- spinBoxOne
- lineedit (from spinBoxOne)
- spinBoxTwo
- lineedit (from spinBoxTwo)
- button
Before this commit setting the explicit tab order changed the focus
order in the following way:
QWidget::setTabOrder(spinBoxOne, spinBoxTwo);
QWidget::setTabOrder(spinBoxTwo, button);
- spinBoxOne
- spinBoxTwo
- button
- lineedit (from spinBoxOne)
- lineedit (from spinBoxTwo)
In this case, backtabbing from spinBoxOne actually leads us to
lineedit (from spinBoxTwo), which refers to spinBoxTwo.
And so we're stuck in a loop.
This commit fixes the issue by handling such special case, and
preserving correct focus order.
Note: the actual unit-test in this patch uses QLineEdit instead of
QPushButton, because one can't tab to buttons on macOS by default.
However the general idea is the same.
Pick-to: 6.0 5.15
Fixes: QTBUG-81097
Change-Id: I5d16da7733a4d63f809cab28b8ca9e116b87cffa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QGuiApplicationPrivate::processMouseEvent() sends a
QWindowSystemInterfacePrivate::TouchEvent if the mouse event is not
accepted and AA_SynthesizeTouchForUnhandledMouseEvents is enabled.
A QPA TouchEvent always contains native touch points, which is why
it calls QWindowSystemInterfacePrivate::fromNativeTouchPoints to
translate the QMouseEvent's device-independent position back to the
raw position that it would have had if it came from a real touchscreen.
Therefore we must give that function touchpoints that are actually in
native coordinates.
It may be that some of this transformation could be avoided entirely,
but here we prove that the existing way works correctly, by adding
coordinate checking to the tst_QWindow::mouseToTouchTranslation() test.
Pick-to: 6.0
Task-number: QTBUG-86165
Change-Id: I4c9ca2b11e9eb76d79712c187db3eb9865da581a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Android and Wasm do not build the offscreen platform
plugin (see src/plugins/platforms/CMakeLists.txt).
Skip building the tst_qhighdpi test as well in this
case. Remove the BLACKLIST entry.
Task-number: QTBUG-88505
Change-Id: I172198c8c24759b14f73ad07260c449fc6ab893f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The delta was clearly intended to be used on the total (and still is)
but it also wound up getting stored in the cache, which wouldn't be a
big problem unless the object was removed, in which case we could
incidentally 'free up more space' than intended.
Pick-to: 6.0
Change-Id: Ib2b0f072d30da6d16a93dce60e4c5f6080c109fc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Some ODBC drivers do not properly handle SQL_NO_DATA and therefore
decimal values returned with HighPrecision are cut off because the
decimal point is not taken into account.
Fixes: QTBUG-73286
Pick-to: 6.0 5.15 5.12
Change-Id: I905c947b4d0266a3245d5735300300ca00f77480
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
From QRhi's perspective this consists of two things:
- A shader with samplerExternalOES in it cannot go through the standard
pipeline. Rather, a QShader with suitable GLSL code in it has to be
constructed manually. As this is something useful as an autotest
anyway, add a test case to the qshader autotest that demonstrates
this.
- When it comes to correctly calling glBindTexture, add a QRhiTexture
flag. The expectation is that an OpenGL-only client sets this in
combination with QRhiTexture::createFrom(), thus wrapping an existing
texture that then gets bound to the GL_TEXTURE_EXTERNAL_OES target
instead of our usual GL_TEXTURE_2D.
For completeness we also add a SamplerExternalOES variable type to
QShaderDescription, but the sampler type is not actually used by the
QRhi OpenGL backend, as it is the QRhiTexture that defines the
texture target.
Change-Id: I36b52325deb3703b59186ee3d726d0c3015bfc4b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...to the extent it is sensible. We have to make compromises still,
meaning some fields will only be applicable with certain APIs.
Most of this is already shown upon QRhi::create() as info debug
prints, when enabled. Now expose it all through the QRhi API as
well.
This is useful for printing in qtdiag, and, while it should be
avoided as much as possible, to make decisions about disabling
3D rendering features depending on the driver and GPU in use.
Change-Id: Iebe1e192965c928b82a094d1c7c50ddf4b38b9a2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The color should be used across the board, so the PlaceholderText color
should also be respecting the one passed for Text and so on.
Fixes: QTBUG-89815
Pick-to: 6.0 5.15
Change-Id: I2accb3db35488f95a1c8ebacf2316a08ee416fac
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QTextDocument and the text editor classes suggest to override
their loadResource() methods to provide data associated with
a text document. This approach has the following drawbacks:
- it requires subclassing
- there is no way to set a global resource provider
- QLabel is missing virtual loadResource() method and
it can't be added without breaking ABI
QUrlResourceProvider is designed to solve these issues.
One should create a derived class that implements
QUrlResourceProvider::resource(). The objects of the derived
class then can be set for any text document.
The default resource provider can be set with
QUrlResourceProvider::setDefaultProvider().
This change also adds QLabel::setResourceProvider(),
which doesn't break ABI.
[ChangeLog][QtGui][Text] Introduced QUrlResourceProvider that allows to
load resources for HTML. It is intended to replace the use of
QTextDocument::loadResource().
Change-Id: Iaf19b229f522a73508f20715257450fe58f68daf
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Per the discussion of QTBUG-88831, we determined that module-wide
imports are unfortunate, especially for compile times. Following this,
all QtDBus includes have been replaced with the headers for the classes
actually used in each file. Additionally, some cleanup of header file
order and format has been performed in the changed files.
Pick-to: 6.0
Change-Id: I62c1b75682a48422f0ba1168dd5d7bd0952808ac
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test deletes instances of QMimeData in the dropMimeData function.
The compiler warns about deleting objects of incomplete type if QMimeDate
is only forward declared.
Change-Id: I3423a7ea334180ff0b68efbecb3d3feeb0632239
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If we create a QBindable from a const property, we should obtain a
read-only interface. Besides implementing this feature, this patch adds
a isReadOnly method to Q(Untyped)Bindable which can be used to check
whether one can modify the property via the bindable interface.
Task-number: QTBUG-89505
Task-number: QTBUG-89469
Change-Id: Ic36949a5b84c5119e0060ed0a1cf4ac94a66f341
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The Android tests were marked insignificant for some days, due to an
emulator issue, these tests slipped during that time. Exclude them now
to bring Android tests back.
Task-number: QTBUG-89398
Pick-to: 6.0
Change-Id: Ia65a0ae8d7474fd2554dda299a60371dbbc9dddb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The Android tests were marked insignificant for some days, due to an
emulator issue, these tests slipped during that time. Exclude them now
to bring Android tests.
Task-number: QTBUG-89402
Pick-to: 6.0
Change-Id: I96d0f87b36975b7e2c83956b04b6569a03a781a9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This patch adds native support for SQL_REAL (float) and SQL_SMALLINT
(short). Previously those datatypes were mapped to double and integer.
[ChangeLog][QtSql] The ODBC driver now properly maps QMetaType::Float to
real sql datatype and QMetaType::Short to smallint
Fixes: QTBUG-8963
Fixes: QTBUG-57279
Change-Id: Ifec4c609734dbe6165c1ebdadb461c2aae47ba78
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
SecureTransport does not allow deprecated digest algorithms, and
(depending on ST version) it may or may not accept our server's
certificate.
Funnily enough, they 'fluctuate' between versions again and again.
Fixes: QTBUG-89922
Change-Id: Ie5fbfca316806bd5000ce2d128b81b718bb36624
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
With the introduction of QKeyCombination, the result of |'ing together
a set of modifiers and a key goes always through the same QKeySequence
constructor, no matter the order.
The implicit conversion through int when the wrong order is used
causes a compiler warning as that conversion is deprecated. So remove
that test case.
Pick-to: 6.0
Change-Id: I04e27bcd51723ee0efc77e52e45ca3eb8bac5fc7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Test data causes the QBitArray to be read as 0 byte length. Same issue
on all 32bit systems, removing android blacklisting as this was the only
one failing there.
Task-number: QTBUG-87660
Change-Id: I63f0c1c6fa4e2242e6ebe70f50e422ab0fbf1c88
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Most tests fail when running on QEMU ARMv7, but not on target HW or
QEMU ARM64.
Task-number: QTBUG-89819
Change-Id: I686268c200cce1a44a717b80c2970f608be44636
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
systemTimeZoneChange() fails also on 32bit QEMU ARMv7.
Task-number: QTBUG-87663
Change-Id: I5c006a8637edff0a95b1f9b76d2c58006aeae6d6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test case fails also on QEMU ARMv7.
Task-number: QTBUG-88705
Change-Id: Ibe8c777f0205b298f6b9a27c067dd552253fcf33
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The alignment has been recently updated but never correctly tested,
as test has either been disabled or marked as insignificant.
Change-Id: If6e529c290b2057f58c3b27c89279d9e90728ad4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: hjk <hjk@qt.io>
As lists of QStrings and QByteArrays are sequentially iterable the base
types should really also be.
The only problem is that they don't have methods to remove items from
the back or the front, but that is well within what we can support with
QSequentialIterable.
Change-Id: I2ab551e7b11a092aba363fb4012d131bbc4b11b4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is standard for all test cases. It matters, because cmake targets
are generated, and e.g.
$ ninja tst_qabstractitemmodeltester
should do what the user expects.
Change-Id: Iac8160c53d5005382e61c03b7daceaba0a4c2596
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: David Skoland <david.skoland@qt.io>
QMultiHash::equal_range crashes when called in a const member function.
The Data `d` is a NULL pointer when calling equal_range()
before inserting data into an empty QMultiHash.
Then calling`d->find` crashes.
Fixes: QTBUG-89687
Pick-to: 6.0
Change-Id: I10c3d196cbc72aed8c8c922ef16534bba51037b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The spec hasn't changed, but I made the same mistake in xdgmime
(the reference implementation) and in Qt: when multiple globs match,
and the result from magic sniffing is unrelated to any of those globs,
then I used the magic result, but that's wrong, globs have priority
and one of them should be picked up.
This is now fixed in xdgmime
(https://gitlab.freedesktop.org/xdg/xdgmime/-/merge_requests/3)
and in the expected results in shared-mime-info
(https://gitlab.freedesktop.org/xdg/shared-mime-info/-/merge_requests/99)
which this commit is also tested against.
This change also optimizes QMimeBinaryProvider::addFileNameMatches
to have the same logic as xdgmime for glob matching:
literals > extensions > other globs
As soon as one category matches, we can stop there.
This makes no difference in the overall results, in practice.
The user bug report (against the Qt implementation, actually)
is https://gitlab.freedesktop.org/xdg/shared-mime-info/-/issues/138
as well as https://bugs.kde.org/show_bug.cgi?id=411718
Pick-to: 6.0 5.15
Change-Id: Ia0a34080427daff43c732609443ee6df8f41447c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix indentation in tst_qlockfile and remove QtTest include in
tst_qcheckbox.
Change-Id: Idf630c6337859dbcc8f644010b941bfe55bb0633
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously it only worked when isNull() was false, which is true for
very short lines, even though length() may be non-zero.
[ChangeLog][QtCore][QLineF] QLineF::setLength() will now set the
length if the line's length() is non-zero. Previously, it was
documented to only set the length if isNull() was false; this is a
fuzzy check, so isNull() could be true for a line with non-zero
length().
Fixes: QTBUG-89569
Pick-to: 6.0 5.15
Change-Id: I803e622ad09c85815dde25df8dd3ba6dfcba0714
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QAbstractItemView::selectionCommand() returned the wrong SelectionFlags
when no event is given since c4366ff018.
Therefore re-add the call to QGuiApplication::keyboardModifiers() when
no event is given and add a unittest for them so it's not removed again.
Fixes: QTBUG-89711
Change-Id: I107357df08c4ff1b1a14d49523401c5e7b428f56
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Just to avoid validation warnings on systems where the sampling
a D32 texture with linear filtering is not supported.
This is likely not a problem elsewhere: Qt Quick 3D for example
samples the depth texture only with Nearest filtering already.
Fixes: QTBUG-89761
Pick-to: 6.0
Change-Id: I80bf5b7ecfcb3365f4010daa17f2ef00bb206b74
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Even though there is no D3D-specific logic in the windows platform
plugin, meaning a QWindow with either OpenGLSurface or VulkanSurface
(or anything really) is DXGI/D3D-compatible, it now looks like it is
beneficial, and more future proof, if there is a dedicated surface
type.
As the linked report shows, there are OpenGL-specific workarounds
accumulated in the platform plugin, while not being clear if these
are relevant to non-OpenGL content, or if they are relevant at all
still. (and some of these can be difficult/impossible to retest and
verify in practice)
When D3D-based windows use the same surface type, all these are
active for those windows as well, while Vulkan-based windows have
their own type and so some of these old workarounds are not active
for those. To reduce confusion, having a dedicated surface type for
D3D as well allows the logic to skip the old OpenGL workarounds,
giving us (and users) a more clear overall behavior when it comes
to OpenGL vs. Vulkan vs. D3D.
The change is compatible with any existing code in other modules
because any code that uses OpenGLSurface for D3D will continue to
work, using the new type can be introduced incrementally.
Task-number: QTBUG-89715
Change-Id: Ieba86a580bf5a3636730952184dc3a3ab7669b26
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][QtCore][QProcess] Added support for
setStandardOutputProcess() with startDetached().
Change-Id: I61278cdb7084127f583c8c017688da392017b44c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[ChangeLog][QtCore][QProcess] Added support for QProcess::MergedChannels
mode with startDetached().
Change-Id: I953ad2063322015332269522a297f8e2842e438c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In 1947, Germany had not only a summer time but also a
"Hochsommerzeit", a high summer time. This patch adds a test
creating a QDateTime in the time gap at the beginning of this
Hochsommerzeit on May 11, 1947.
Pick-to: 6.0
Change-Id: Ib81a23914965f092c3e3195e4c7258e5a4e0b30e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Blacklist qfont tests that don't work correctly with qemu.
Task-number: QTQAINFRA-3836
Change-Id: I7f5d4b07428febb0adb82d38203226b5c56a2ad5
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
