The Thursday in the same week has the same week-number and determines
the right year to use for the week. So calculate its week-number and
save a whole lot of complications.
Change-Id: I9c28267e6083afdd04a15245e1609c64beb82b37
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The array of QAtomicPointer<QMutex> can be initialized using relaxed
stores of nullptr, since nullptr is the whole data. But once we store
an actual QMutex pointer in the array, we need to publish the indirect
data thus created. We did this, with testAndSetRelease(); what was
missing was a corresponding acquire fence on load, without which there
is no happens-before relationship between the writes performed by the
QMutex ctor and the reads performed by a subsequent mutex.lock(), say,
on the same data.
Fix by adding acquire fences to all loads. That includes the dtor,
since mutexes may have been created in different threads, and never
been imported into this_thread before the dtor is running.
As a drive-by, return a new'ed QMutex that was successfully installed
directly to the caller, without again going through a load-acquire.
Fixes: QTBUG-59164
Change-Id: Ia25d205b1127c8c4de0979cef997d1a88123c5c3
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 65b8f59e04)
(cherry picked from commit da38f0d691d9d7eacfac5fbcbd47b887bd59bd39)
If this function is called by multiple threads, more than one could
reach the mutex locking and call TlsAlloc(), but only the last one would
save the data. The others would be leaked and, worse, be used by those
other threads.
[ChangeLog][QtCore][QObject] Fixed a resource leak caused by a race
condition if multiple QObjects were created at the same time, for the
first time in an application, from multiple threads (implies threads not
started with QThread).
Fixes: QTBUG-77238
Change-Id: Ife213d861bb14c1787e1fffd15b63a5818bcc807
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Libtool cannot cope with absolute paths in the dependency_libs entry.
We split absolute paths into -L and -l here.
Change-Id: I30bf11e490d1993d2a4d88c114e07bbae12def6d
Fixes: QTBUG-76625
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
In MakefileGenerator::initOutPaths() we ensure that directory
variables end with a directory separator, except for DLLDESTDIR.
There doesn't seem to be a valid reason for this exception.
Remove it for the sake of simplifying the code base.
Change-Id: I60eb01b410161e6e1d147d76f044f5140a7573bd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This undocumented option was introduced in
69c22301806b56d56cbe5f5076b889ba98e41a2b (old internal history, 2006) to
prepare some unspecified change to configure that was never done.
Change-Id: I60de731ac9bc6f6424c57574e59e9f6b4f6c5eb3
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
(or forward-declare std types)
(with apologies to Mr Walter Brown)
This applies the changes to our other smart pointers that
a0c4b6f345 applied to QSharedPointer,
with the same rationale: wg21.link/p0551.
It also fixes a fwd declaration of std::function, including
<functional> instead. Rationale: wg21.link/p684r0.
Change-Id: If275af91f6eac15eb418b200ac7d08ba084a6130
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Adds setters for transfer-functions and primaries.
This allows us to remove use of private QColorSpace API from the PNG
handler.
Change-Id: Ieeff81c813c253649500acd1e53f35247b872325
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Change-Id: Iaa6eb4d64f549a31aa5c53145e8b37facec4ea78
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also make sure the gl backend is consistent with the other three.
Change-Id: I2f6b783f5fa474c94ede460f5d7ac6fe8129a4f6
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Note that SPIRV-Cross does not translate 'bool' to GLSL versions
that do not have uint. So in practice we will still need to use
'int' instead in shaders that also target old GL versions.
Change-Id: I070f5414fe761796ab92937034b7182cdfb73a14
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Following the Quick scenegraph (qt.scenegraph.*), we now have
qt.rhi.general. Other categories may get added later.
This does not change the printing of real errors, those will
continue to use qWarning().
Change-Id: Id95416fc82ba8add9527212e431bcbd47d416f1a
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Added checking corner cases (more specific formulas) in
color_dodge_op()/color_dodge_op_rgb64() and color_burn_op()/color_burn_op_rgb64()
to produce correct results for any input.
Task-number: QTBUG-77231
Change-Id: I274f80b356bd4236a9176a84a95604c2eb01787a
Reviewed-by: Konstantin Tokarev <annulen@yandex.ru>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Replace our use of 'gamut' with 'primaries'. One is the axes of the
color space, the other the volume of representable values. For the
currently supported color spaces those are mostly equivalent, but when
we later add support for scRgb, this would be misleading as it has the
same primaries as sRGB but a much wider gamut, and we would like to use
the same primaries/"gamut" id for it.
Also few people would know what "the sRGB gamut" is, but
"the sRGB primaries" is easily googable.
Change-Id: I3348ccaae27a071ec77a4356331b9bbbf92e0d19
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Re-generation of the Makefile depends on a correctly set up
QMAKE_INTERNAL_INCLUDED_FILES variable. In debug_and_release builds
this variable is set up for Makefile.Debug and Makefile.Release, but
not for the meta Makefile. However, that's where the Makefile
re-generation target is located.
We now collect the contents of QMAKE_INTERNAL_INCLUDED_FILES for
Makefile.Debug/Release and use that for the meta Makefile.
Fixes: QTBUG-13334
Change-Id: I6124a91447d5c54d51680e23570c4e97f44e6a73
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Build docs for deprecated APIs conditionally, based on deprecation
version. Remove the docs of methods deprecated since 5.0.0, these
methods are not compiled anymore.
Change-Id: If9302eecc8b3fff4a27c2e4a66ac102add7d66c5
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Replace the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Build docs for deprecated APIs conditionally, based on deprecation
version. Remove the docs of methods deprecated since 5.0.0, these
methods are not compiled anymore.
- Modify the tests to make them build when deprecated APIs disabled:
* Make the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods
are enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, add tests for the replacement
Task-number: QTBUG-76491
Task-number: QTBUG-76540
Task-number: QTBUG-76541
Change-Id: I6aaf0a1369c479fb880369a38f2b8e1e86b46934
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- No need to use QSignalMapper here, replace its uses with lambdas.
- Replace index 'for' loop with iterator loop, to simplify the code.
Change-Id: Ide3d2db99a074c0233eb5c2fd7a9b217d804973f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
One of the tests above was unsetting a variable that enforces
the use of a temporary keychain. We have to set it back, otherwise
the test is failing. What surprises me though - why I had this
problem only locally and not on CI? Apparently, SecureTransport
is not covered by our configurations ...
Change-Id: I0ff1e3e304632869391ed61213c245b949d8c778
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
From the comments on QTBUG-73407 and the last comments on
29bcbeab90, it seems like there are still
use-cases when QSignalMapper is useful.
Change-Id: I8402286cb8a395a4601cda8a4cdda51f19aef073
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Allow AppKit to resolve screen for NSWindow lazily in the case where the
position is outside any known screen. And explicitly set the style mask
if detecting the corner case of positioning a window in the unavailable
space on a rotated screen.
In testing the effect of creating the window with a borderless style mask
and then updating the mask did not seem to have any visual consequences,
but we try to limit this mode just in case by only enabling it in the
corner cases we detect.
Change-Id: I4b7fcc6755a1ad5ff2683bec79d80a78226edae0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The user may have assigned the application to start up on a specific
display, in which case the window's screen is nil after creation, and
the resulting screen will be delivered as a normal screen change once
the window is ordered on screen.
Fixes: QTBUG-77154
Change-Id: Idade6d833e31654db239243f2430166b5d86eca2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Done-with: Sona Kurazyan <sona.kurazyan@qt.io>
Change-Id: I5b584cbe468429c53c2d661a0d7957d74e7ad691
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add overloads for qCompare() for QStringView making use of the fast
formatting helper introduced by 94aa350621
for int.
Speeds up the bug report example by a factor of 3..4.
Task-number: QTBUG-38890
Change-Id: Icc706618b2f1d23b37d354a04d4e1d1cc4b5aee3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Somehow missed these during my first iteration.
Change-Id: Iaef0ab84d9320a98f49ec071c93cd6f2907d92c3
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Introduced recently when the smart-pointer was made manual.
Change-Id: I29a041631e94a8e131dd29dae32975d68b386e00
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
std::not1 is deprecated in C++17, removed in C++20.
Use its replacement, std::not_fn.
Change-Id: I37d4929c81c2a5befeb44f954ae77b23960d2ff0
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
For some reason, the overload resolution of the
High DPI scale() functions introduced by
b6ded193ee chose the
wrong overloads for QPointF and/or QPoint; it fell
back to the generic template intended for qreal,
QSize, etc, ignoring the origin. Remove the
template and spell out all overloads.
Fixes: QTBUG-77255
Change-Id: I5661f16f7326f65156f646f430f5a0c71d5302d2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This change removes the leftovers form other cleanup commits.
Task-number: QTBUG-76491
Change-Id: I61440f87c5a280f9666b78e19aac4d8ac603767e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
In two cases, we now detach. ¯\_(ツ)_/¯ This is test code.
Change-Id: I244f5e20dd923281049f38b76366163c16b6498c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Each call to reourceList() uses atomic operations to check whether
resourceGLobalData has not expired, yet.
Some functions already cached the value, but then went on to use the
function directly afterwards. In some cases, this was due to the
cached value being a pointer-to-const and the function later deciding
to mutate the list. But all the code is safe from detaches, so this
distinction need not be made.
Standardize on caching, and using the cached value, except in
functions which call it only once.
Change-Id: I79780b990da539bf7beaa8104e13cb8187f84812
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Move location of stream ID from a dynamic property to an internal QHash.
Change-Id: I9bab4cbfaebe6a04d54afa7889aac748070e1f2e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add missing implicit size checks of tags by passing the already checked
explicitly given size forward.
Also adds my fuzzing test for the ICC parser as it is security critical,
by being used by multiple image formats.
Change-Id: Ieb632ccb78f9b445a276959ffbd66fa04a7a5b45
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Clean up QSortFilterProxyModel by using const refs instead copies and
range-based for loops instead plain loops
Change-Id: Ic1250f33e7c311a9e1d3c19cc5dc7a9578423e74
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The m_windowState member is never updated regarding active state;
isActive is instead reimplemented to query the window manager, so use
that.
To extend the area where the user can move the window over the entire
titlebar of fixed-height windows, just test whether the mouse position
is within the titlebar.
Change-Id: I6b87aacd0bdab511cfd4959df1114af5c6013852
Fixes: QTBUG-77220
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Since Qt5.1 it is possible to deselect the current selected item in
SingleSelection mode when pressing the Ctrl key during the click but
this was not mentioned in the docs.
Change-Id: I86652308215bf218ea959f869334b6077e4634f9
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
After commit 9c7ebd191b, qmake would
complain about missing cmake tests even for internal modules that have
no application side C++ linkage that needs testing.
Change-Id: I23b23c81dbe6be2b6da5672cbd7b8f8454ec2f66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The newly introduced clear() method left the path in an undefined
state: d_ptr allocated, but no elements. The elements vector is
otherwise never empty, since ensureData() inserts a dummy initial
moveTo element.
Fix by making sure that clear() leaves the path in the same state as
ensureData() (i.e. "empty" but not "null"), except possibly more
capacity allocated in the elements vector.
Fixes: QTBUG-76534
Change-Id: I7ad8b312913f5eb6e22023f5d2fd873e54b1e23c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
