This fixes a bug where joined device and simulator builds would get
for example, QtCore_iphonesimulator as the CFBundleExecutable.
According to Apple:
"For frameworks, the value of this key is REQUIRED to be the same as
the framework name, minus the .framework extension."
This does not affect the ability to load a framework whose executable
name differs from the bundle name (as is the case for simulator builds),
as the application will be linked to the correct framework executable
at link time by specifying (for example) the linker flag:
-framework QtCore,_iphonesimulator
Change-Id: Ib7614670d0620e0235cd7e2606d42dd034a90c68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This is a prerequisite for properly constructed framework bundles.
On certain Apple platforms (iOS, tvOS, watchOS), bundles are used
in "shallow" format, meaning that the directory structures are
flattened compared to the one used in macOS bundles.
shallow_bundle allows the difference to be expressed independently
of the platform. Note that the term "shallow bundle" is used by
Apple in Xcode internals.
Change-Id: I1189c52b0ea66843c313783176c11cc2af97ad25
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Xcode does not recognize "<Group>" with a capital G, only "<group>" with
a lowercase g. As a result, paths of files within these groups are
calculated incorrectly. For example, dragging any external file into the
Xcode project would result in its leading slash being removed (while
still treated as an absolute path - broken reference). Furthermore, the
dropdown in Xcode displayed the Group location as an invalid string
instead of the correct "Relative to Group". This patch restores correct
behavior.
This fixes a regression introduced in
f09ec09c208c75a16abe05b6bb505a1fc58775a6.
Task-number: QTBUG-52701
Change-Id: I9af5360049a79e7958301e4090a9a542bab0af8c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
evidently, nothing and nobody sets this option, as it's been completely
broken since 6234dec41f (qt 5.5) and apparently nobody noticed.
Change-Id: I5a82ebd963a292af4689397875dde096f63d751a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
(or trivially marked const) ... by replacing them
with C++11 range-for loops.
Change-Id: I1522e220a57ecb1c5ee0d4281233b3c3931a2ff8
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
To avoid detaches of these mutable Qt containers,
wrap the container in qAsConst().
Change-Id: If086bea06fe26232a7bb99fad8b09fce4dc74c27
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
The functions QMakeProject::values(), QMakeMetaInfo::values()
and QHashIterator::value() all return by const-reference,
so they can be passed to range-for without further changes.
Change-Id: Ic3b39ed8ff8cd7a6f287f1aa9d61a1acd67d7aaa
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The Xcode generator iterates trought all libraries and replaces
their suffix (e.g "_debug") with a placeholder that lets Xcode
switch between different library versions depending on the target.
The current way we do this fails when the name of a library happens
to contain the string "_debug" (e.g "qmldbg_debugger"). Since we
replace every occurrence of suffix in the path, we end up
replacing that part as well. The result will be linking errors.
This patch ensures that we only replace the last occurrence of the
suffix in the file path.
Task-number: QTBUG-48961
Change-Id: I9fafbe0ea0ad8b9cfd13448d6b28801106e645ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
don't look up the files and normalize the paths multiple times, as this
is inefficient and hard to understand.
on the way, processPrlFile() got unnested, and libExists() got nuked.
note that a missing QMAKE_PRL_TARGET will be now complained about, which
really should never happen.
Change-Id: Ibcd77a7f963204c013548496ecd2d635e1a4baba
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
there is no reason to expect the various list elements to be
space-encumbered, or to tolerate it if they were.
Change-Id: I1a2e5c8d30456b640408503334c55f9262792db5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
With Xcode7, Apple added support for compiling apps to bit code
instead of binary (*). But this is only supported when the deployment
target is at least 6.0. And in Qt-5.5, the deployment target is
still set to 5.1.1. The result is that every Qt application will fail
building once people move to Xcode7.
Instead of bumping the deployment target (which we plan to do
for Qt-5.6), we choose to switch off bit code for now.
*: https://developer.apple.com/library/prerelease/ios/documentation/IDEs/Conceptual/AppDistributionGuide/AppThinning/AppThinning.html
Change-Id: I23001563439a7726506b7cd2dc77a82533b8a27b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
since commit 22edeb3f4 (private; anno 2002), the generator would extract
-prebind and translate it into a PREBINDING property in the pbx file.
the writeout to the pbx file got lost in the rewrite for Xcode 3.2
(commit 66f6e5b1; anno 2012).
this isn't particularly bad, as prebinding is obsolete since OS X 10.3.4.
we now go the last mile and remove the handling of the flag. that means
that remaining projects which still use it (meaninglessly) will get a
warning from Xcode, which is kinda what we want.
QMAKE_LFLAGS should have never been part of the library iteration loop.
it was added there in the prebind handling commit, so we can get rid of
it again now.
Change-Id: Id7dee2b1e248bb2bd7aa7a3e66f82057921afffd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Currently, the Xcode generator uses "sourceTree = <absolute>" for
all PBXFileReferences. But the paths we use for referencing
libraries are relative. This patch will change this, so that we
always use absolute paths to be consequent.
This will fix a crash in Xcode that happens when opening
projects generated by Qt.
Change-Id: I3a372b93598a777c96ba353205cf19710a5923f5
Task-number: QTBUG-45966
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
ProjectBuilderMakefileGenerator::openOutput should only change back
Option::output_dir when creating a pbx file inside an Xcode project.
Since the pbx file will be placed inside a different directory than
output_dir when creating an Xcode project, MakefileGenerator::openOutput()
will redirect output_dir to be inside the Xcode project as well. Since
we don't want this redirection, we change output_dir back to what it
was once the call returns. But we should only do this when creating
the whole Xcode project, since only then we create a pbx file that
is different from output_dir in the first place.
A bug with this is seen when making qt_makeqmake.mak (which is a
helper makefile inside the Xcode project). That file will only
regenerate the pbx file (and not the whole Xcode project), which
means that we don't enter the fileName.isEmpty() section, which
means that output_dir should stay as it is.
Task-number: QTBUG-45826
Change-Id: I03d5c3dec395ff4768f9272fd1981c6fd35efb1e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
instead of allowing arbitrary input and output base paths, restrict them
to the project input and output dirs (in any permutation), which are the
only cases ever used anyway.
this permits much clearer call sites, and allows later optimizations.
Change-Id: I48d149a4417af5c858e66ec57c476a5bc6b17f17
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
explicitly use the correct directories instead of temporarily changing
into the output dir. this makes the code less obfuscated.
Change-Id: Ia935987f486151ae556910703cc20945c7610ffc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
turns out that a relative path makes some versions of Xcode crash.
so use an absolute path again.
fileFixify() has been fixed for shadow builds to make this possible.
This reverts commit 6ccf0a326e.
Task-number: QTBUG-45424
Change-Id: Ica87c6c29f990f56e42c399b6d9b1c7eacdd13a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Will be active when running test apps through Xcode's 'test' action,
and reports QtTestLib test objects and functions to Xcode as XCTest
cases.
This allows running tests on both iOS Simulator and iOS devices from
the command line, through xcodebuild, without relying on any 3rd party
tools. It also integrates Qt test failures and passes into the Xcode
IDE, which may be useful for closer investigation of test failures.
The feature is limited to Xcode 6.x.
Change-Id: I33d39edbabdbaebef48d2d0eb7e08a1ffb72c397
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
17d690952b missed a few instances that should have showEnvVarsInLog = 0.
Change-Id: I8f1106426447670b0057aeb421efc09bf117e969
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Xcode has a setting for script phases to filter out the environment
variables, so we don't need to use grep.
Change-Id: Ica1c64321385ab3e3b47cf6f8f4d4191bd963540
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
A scheme is required to be able to run tests through Xcode, even from the
command line, but Xcode doesn't auto-generate the schemes until launched
as an application. Xcode also auto-generates schemes for all our targets,
but we only need one for the primary application target.
Change-Id: Ia42f3825aba3ffde3be93be55e165d6284434853
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
first replaceExtraCompilerVariables(..., NoShell), then fix the final result.
Change-Id: If8cebeaa59f48d91b33b5a74e6a48a0d2d049643
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
in most cases, it actually means normalizePath() (because the file name is
used with qt i/o functions afterwards).
this affects QMakeLocalFile::local() as well, so many not immediately
obvious places are affected as well.
there was also one case of fixPathToTargetOS() falling into this category.
this is mostly a no-op, as the qt functions are agnostic to the path
separator.
in some other cases (in particular in the vcproj generator), it actually
means fixPathToTargetOS().
this is mostly a no-op as well, as the two functions are equal except on
msys anyway.
in the <meta file>FileName() functions, the use of a fixPath*() function
is bogus in the first place - fileFixify() already does
fixPathToTargetOS(), and this is correct when the file name is used
verbatim in a make command (which it is). otherwise it's irrelevant.
Change-Id: I26712da8f888c704f8b7f42dbe24c941b6ad031d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of quoting more or less random variable contents early,
consistently quote everything only right before it is needed. this way
we can be sure that everything is correctly quoted, but not over-quoted.
this removed the need for the insanity that unescapeFilePath() and
similar ad-hoc contraptions were.
this had the somewhat counter-intuitive effect that it was possible to
remove escapeFilePath() calls from PBX::writeSettings() calls - these
were actually only unescaping.
[ChangeLog][qmake][Important Behavior Changes] A lot of quoting issues
have been fixed. As a side effect, qmake has become more sensitive to
over-quoted file names in project files.
(*) ok, maybe not. close enough.
Task-number: fatal: out of memory
Change-Id: I8c51cfffb59ccd156b46bd5c56754c480667443a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
fixing and escaping is now a tri-state option:
- none (this removes the need to unescape the result right afterwards in
some cases)
- local shell (for system())
- target shell (for Makefile)
Change-Id: I5b78d9b70630fe4484dc964eff5f62793da35764
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Use of FileFixifyAbsolute with non-default in_dir and out_dir
is not defined (and produces bogus results).
Using FileFixifyRelative when handling QMAKE_BUNDLE_DATA as a relative
path is fine.
Change-Id: I49902dc9f5b8029d092a4419c0cff5483e419c30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
we (supposedly) fully support QMAKE_EXTRA_COMPILERS, so there is no need
for any special casing here.
Change-Id: I4e9d389320a3e5ad0acbf73823ff1e6f7b9c370f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the path is processed, and afterwards fixForOutput()ed again. the first
call makes no sense (even if it registered some variables that are gone
in the second call, that would be pointless exactly because they are gone).
Change-Id: I251f1e4858bec36f3a7a9427c2ba78031b35a2d3
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
commands come already fully expanded and quoted from the project.
Change-Id: I239d5c305f5f65d32c832bc09bfd1c322051e149
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of having each generator do its own magic (little surprisingly,
with different outcomes), add "stuff" to the search path in one place
used by all generators. this has several consequences:
- (unless disabled via CONFIG+=no_include_pwd) $$PWD is now consistently
prepended by all generators. most notably, this was entirely missing
from the MSVC generators (both nmake and VS) - despite them needing it
most. this also affects Xcode projects.
- $$OUT_PWD (if different from $$PWD) is now added right after $$PWD,
not at the end. this precedence clarification only makes sense, given
that qmake tries to make shadow builds as transparent as possible.
- the qmakespec's dir is now consistently appended. the UNIX and PBX
generators prepended it, while the rest already appended. few files
actually include qplatformdefs.h, so having it late in the search path
seems reasonable.
- the effect of CONFIG+=depend_includepath is now fully consistent with
the actual include path.
Change-Id: I5f7570183351ade29342ea74fef706a0738842bf
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
neither qmake_getpwd()'s return value nor a fileFixify()'d version of it
can be empty.
Change-Id: Ic3b7d20becc57209b9dbe71ad9dc8e7547d435b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
