The test run faster and it less vulnerable to an inaccurate time.
Change-Id: I19475095395dcf1e6d47fdbba5eeffabab1fc7b9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Now the test is less fragile to time and it executes 4s faster
Change-Id: Id3eb8ed2c03317e7d2f2c3cd17f889a8d8e7e5b4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The test still can fail because 1s is quite a short time.
Change-Id: I6f42c182f2932d5a053f6a69667210529c9a7697
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
- Do not save geometry when going from maximized->fullscreen
- Use SW_SHOWNA instead SW_SHOWNOACTIVATE as otherwise the
maximized geometry is restored.
- Add a test for Windows.
Task-number: QTBUG-49709
Change-Id: Ic81e7398ee90d499a50b02192a45cb09276a2105
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
As for the #include-parser, the moc-detector's minimal C preprocessor
could be confused by a raw string into ignoring large chunks of code.
Change-Id: Id688e9a1f04628ce75a51a7d15269078c734288e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If a / wasn't part of a comment-start, it and the character after it
were none the less stepped over. If the character after started an
enclosure, this would duly be missed, leading to mis-parsing of the
subsequent text. As for similar bug recently fixed in findDeps().
Change-Id: Ie5329ec633c23a554b42a6351723c980e27fb9a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This extends the test suite introduced in 497f0af1f7 for
a known-to-be-good case also for 32 bit systems.
Change-Id: Ia231bcb9b0102c28483d932be18767662b7a6afd
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Previously, the geometry stored for floating dock widgets
in QPlaceHolderItem::topLevelRect and QDockAreaLayoutInfo::saveState()
included the window frame (frame position/content area size).
This does not work in the case where a floating dock widget is deleted
since the geometry is determined after reparenting the widget when the
frame geometry is no longer available. Change the behavior to store
the geometry excluding frame to avoid such problems and adapt
QDockWidgetPrivate::setWindowState() accordingly.
Task-number: QTBUG-49832
Task-number: QTBUG-45780
Change-Id: I84b5c80df6e1c9e738bbb1407b9047cc84719ce0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test is marked as blacklisted on 10.10, and it
is found to still fail in 10.11.
Task-number: QTBUG-49834
Change-Id: Ibddb1af6b61f3fca2b2aea18102bbaa5390a40d3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The C preprocessor allows backslash-newline anywhere and allows
comments anywhere it allows space. Testing wilfully perverse
applications of that revealed qmake's parsing of #include directives
wasn't very robust. So rework to actually follow the rules and add
those tests.
Change-Id: If5cc7bfb65f9994e9ab9ed216dd1ee7285c63934
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This reverts commit 9a6a58a95a,
which was a work-around for a qmake bug, now fixed.
Task-number: QTBUG-19393
Change-Id: Id467bb5907a88f03eac0e29a90f4ff7e97045423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Since special files have file size == -1, they were always filtered
out by QFileSystemModel, even when passing QDir::System as filtering
option. Keep them instead.
The testcase is more convoluted than it should be because QFSM
is so broken that it returns valid indexes for invisible elements
in the model (such as filtered out elements).
Change-Id: I023a9813dbfeed7be99dded42c66b1191afdc17e
Task-number: QTBUG-20968
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test was comparing an "unsorted" file listing read from disk
with a reference listing, checking whether the two were different.
Obviously that's a nonsense test, as there's no stable order
for the entries returned by readdir_r and friends.
Change-Id: I1d781a6513c42bb0b585d02e57a771c5336c7df4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
I still have no idea how to fix this properly given the absolute mess
of QWidgetLineControl. For now add a failing test.
Change-Id: Ieb5ad6994c8ce7deb0cd0f2f47d51073d042244e
Task-number: QTBUG-49295
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The parser in QMakeSourceFileInfo::findDeps() would step over the
closing quote of a string, only to have a for loop then step over the
character just after that closing quote, which was thus never studied;
this could lead to problems in various ways. Fixed that and expanded
findDeps() test to catch regressions.
Task-number: QTBUG-17533
Change-Id: I7dec5222e38fa188495b39376ffee70bc7bbc87f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It makes little sense to give focus to a hidden widget; in order
to make the treeview visible, we need to set the view mode to Detail.
Change-Id: I453111e83593a790a656651b603a9c9b1a78dd9d
Task-number: QTBUG-7690
Reviewed-by: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
... otherwise we would not detect subsequent file/directories added
into the non-removed one.
Change-Id: I43018dfb9a9c6c0399190800da3f0d572ec5d8d8
Task-number: QTBUG-49307
Reviewed-by: David Faure <david.faure@kdab.com>
Replace hide() call (present in itemViewKeyboardEvent since Qt 4.5)
by reject(). Add signal spy to existing test function.
QDialog doc states that reject() will always be called on Key_Escape.
hide() is not enough: it makes exec() terminate and return the proper
value, but the signals finished(int) and rejected() will not be sent.
Task-number: QTBUG-7690
Change-Id: Ica4ae2843574478c5b9a7672f871f3ef3f16f3c9
Done-with: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
If the LHS is detached and has existing capacity that is large
enough to hold the RHS, re-use the memory instead of allocating
a new buffer and throwing away the old.
Change-Id: I53d42825da92c264c7301e8e771cba9fb35c321b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Can't sensibly test unless the compiler does support raw strings,
since any test that would catch qmake's (prior) inability to parse raw
strings would necessarily confuse the C++ compiler in the same way.
This even applies (in test app code) to any #if-ery around the raw
string, since tokenization happens before preprocessor directives are
resolved. So the #if-ery on Q_COMPILER_RAW_STRINGS has to be in
tst_qmake.cpp, not the test app it builds.
Change-Id: I4a461f515adff288b54fb273fd9996f9b906d11c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 64a1448d87 (Qt 5.2) caused
QNetworkInterface to report address labels (a.k.a. interface aliases) as
separate interfaces. This is caused by the fact that glibc, uClibc and
MUSL copy the address label (netlink address attribute IFA_LABEL) to the
ifa_name field, which made QNetworkInterfaceManager think that it was an
interface it hadn't yet seen.
Address labels are the old way to add more than one IP address to an
interface on Linux, for example:
ifconfig eth0:1 192.0.2.2
Those do not create a new interface, so the "eth0:1" label maps to the
same interface index as the parent interface. This has been deprecated
for 10 years, but there are still tools out there that add addresses in
this manner.
This commit restores behavior compatibility with Qt 4.2-5.1. The Qt
5.2-5.5 behavior is incorrect because it reports more than one interface
with the same index. On systems configured like the above, the
tst_QNetworkInterface::interfaceFromXXX test was failing.
Change-Id: I8de47ed6c7be4847b99bffff141c2d9de8cf7329
Reviewed-by: Richard J. Moore <rich@kde.org>
It should compile, since the std::shared_ptr does.
[ChangeLog][QtCore][QSharedPointer] Fixed a problem that would cause a
compilation error when constructing a QSharedPointer of a const type
when the type derives from QEnableSharedFromThis.
Task-number: QTBUG-49748
Change-Id: I8de47ed6c7be4847b99bffff141c84f5e0b6bea8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QColor always uses unpremultiplied alpha, but the new QImage methods
were based on the QRgb versions which might be either. This patches fixes
the two new methods so they treat QColor alpha correctly.
Change-Id: I78a5b875ad4e78ad7fde3b811c6187482b4f6d15
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Introduce QVERIFY2() to get some information when exactly it fails.
Change-Id: Icaddf2ecae434d0bafc90c18458c5ee067dfd506
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This follows up 130c2baa93.
Change-Id: I2f6c9b4f995af427cec9a2162b782039debf8564
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Only add C++14 to the project configuration when C++14 support is
available on the platform. Adding it because the platform supports
C++11 doesn't work when the platform _only_ supports C++11 (e.g.,
QNX 6.6.0).
Task-number: QTBUG-49491
Change-Id: I15de38bb06d912a314b9dd18c80b513cc06a855e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use SW_SHOWNORMAL instead SW_SHOWNOACTIVATE as a parameter to
ShowWindow() to enforce the window to be restored to normal state,
even if the state before minimized was maximized.
Task-number: QTBUG-48449
Change-Id: I9436623b1495f574a72050e50e8b31bfc83ced5c
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
The old code was extremely inefficient, and QCollator
can provide the same functionality in a much better
and faster way.
Task-number: QTBUG-30902
Change-Id: Iaf5dbe587d9a6ebca26885259fdee74a29d3c84f
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QVariant was using QColor::name() to convert a color to string, which by
default loses alpha value. The patch is fixing the problem by always
including the alpha value in the string when required.
[ChangeLog][Core][Variant] QVariant(QColor)::toString() uses
QColor::HexArgb format when the alpha component is different from 1.
Task-number: QTBUG-37851
Change-Id: I887460c1ea151180ba99d64dd873ba9d6e2268f2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
In QMenuPrivate::hideMenu(), delay clearing of 'causedPopup.widget'
to after the QMenu::close() call, so that it is still accessible
in QMenu::hideEvent() which calls QMenuBarPrivate::setCurrentAction(0)
if the caused widget is a QMenuBar.
Task-number: QTBUG-47377
Task-number: QTBUG-49592
Change-Id: Idbda48e918dae799afea84068a60d7383d7b4971
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The platform window geometry can be misleading until it has
been properly positioned and
QWindowPrivate::resizeEventPending has been cleared.
Task-number: QTBUG-49588
Task-number: QTBUG-48396
Change-Id: Ie065f62478fc8522a9ad51391bb897510afa5aad
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Remove unused ctors and dtor, add Q_OBJECT, indent,
privatize slots, don't check for nullptr before
delete'ing a pointer, and add one override keyword.
Setting test_box (a QPointer) to nullptr is already
done by the variable's default ctor.
Change-Id: I13f06dc8104ef1c0ac08a25c960641c076f10499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Replace hardcoded interval by QTRY_COMPARE() ensuring that all tasks have
finished, since otherwise QThreadPool::tryStart() fails in the next run.
Remove blacklisting for MSVC2012 since it is not compiler-specific.
Task-number: QTBUG-49654
Change-Id: If49b6eb9ef4da4ba2911839166c397d84c175e00
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Ensure the test works in a working directory with read-only
permission and that the file names are unique.
The test can then be executed repeatedly by COIN even in case
left-over hanging process helpers still lock the files. Also
disambiguate the "data" files used by various tests.
Task-number: QTBUG-47370
Change-Id: I3b9c7b70828da78f400196fcbba27bc61ea4538f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Introduce constants and make the interval for the 2nd thread a bit
longer.
Task-number: QTBUG-49653
Change-Id: I92ac0494ec6c9af5bde858007d08e26210215434
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Introduce a base class for the threads that ensures termination in the
destructor to ensure all QThreads instantiated on the stack are terminated.
This should reduce crashes since the test thread classes have pointers
to stack variables of the test slots.
Set object names on the threads for better diagnostics.
Decouple wakeOne()/wakeAll() that impact each other via the static count
variables of the thread class by introducing a base class WakeThreadBase
keeping a pointer to an QAtomicInt count variable on the stack instead
(similar to the existing pointers to the mutexes, etc).
Task-number: QTBUG-49653
Change-Id: I73537386bf36019efa81e8e24ba9af92506f7794
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
It was used to verify waitForFinished() and printed QProcess::errorString()
on failure, which is misleading, since the process is not
in an error state - it is still running. Example:
QWARN : tst_QProcess::setStandardOutputFileAndWaitForBytesWritten() QProcess error: 5: Unknown error
FAIL! : tst_QProcess::setStandardOutputFileAndWaitForBytesWritten() 'ret' returned FALSE. ()
Use a plain QVERIFY instead.
Task-number: QTBUG-47370
Change-Id: Iacfa6e1a5ffd2be4e1257a27a400ccc59671e8c8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Silence warning:
Don't know how to handle 'hint', use qRegisterMetaType to register it.
Task-number: QTBUG-49623
Change-Id: Iec0a823c7af87eddd9a3f126a1b970da1ff2f03f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Move the code from cleanup() into a separate cleanupTestData()
and call this from initTestData() and cleanup(). Remove slot init().
Change-Id: I4e7b5b89197ed0aa50f46f730e9c1d9c59749614
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use a QTemporaryFile in readFromFileAfterJunk() instead writing
to the current directory which might not have write permission.
Enclose each call to QFile::open() in QVERIFY2() with error message.
Change-Id: I3c5da31c6681a2396cee473cafe7d92c5c220de3
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Create a temporary directory instead of writing to the
test data directory or home path (Android).
Change-Id: I6af583e5da91eefb603eaae179e7d789487dc626
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
