This is inspired by QBluetoothUuid's quint128, but with a better
name. It also matches systemd's sd_id128.
Change-Id: Id8e48e8f498c4a029619fffd172893dc1545adda
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Relevant mainly if we want to consistently expose these as the
theoretically correct uint32_t/quint32 from Qt Quick's
QSGRendererInterface. (not that int is not sufficient for
indexing the typical 3-4 families and 2-16 queues per family)
Some checks are not actually needed since the family index
must always be valid after create().
Pick-to: 6.5
Task-number: QTBUG-108895
Change-Id: I474ccea51a81e7a096281604ff79b7db4cdd2484
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
qdbusxml2cpp takes a filename to use for generated output. It may be in
the form 'name.cpp' or just 'name'.
For the moc file we need to convert this from a path to a name of a file
in the same relative folder. It's not uncommon for this name to contain
dots as sometimes a dbus interface name is used directly. For the cases
where a suffix is not provided the whole name should be used.
Pick-to: 6.5
Change-Id: I3bf4ae8b2b9121184c2786009e8b5abcc5e3e410
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
WHEN writing an invalid character, THEN we expect the writer to report
an error.
The old code had it the wrong way around. It checked that WHEN the
writer reports an error, THEN the character was invalid.
The formulations are equivalent, but the latter is mixing up cause and
effect, making it less clear what's being checked (QXmlStreamWriter,
not isValidSingleTextChar()), so swap.
Pick-to: 6.5 6.4 6.2
Change-Id: I703de9ddde98d9913977a913f671472930735900
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
This improves the runtime of this particular test function by
almost 17% on my machine.
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: Icd77cdda92374b92121988c99e56787d405fa2d9
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
These tests exhibit weird crashes when run under ASan, but sometimes
they fail sometimes they don't. Pending more insight, just skip this
test under that configuration.
Fixes: QTBUG-109329
Change-Id: I49d940de419f7166aab0da0b8c2b44297c4b6d74
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
in our tests.
They are not needed anymore since
d20f4ae706 got merged and the
QT_ANDROID_PACKAGE_SOURCE_DIR property is read at generation time
rather than configure time.
This means the
qt_internal_add_test ->
qt_internal_add_executable ->
_qt_internal_android_executable_finalizer ->
qt_android_generate_deployment_settings
calls take care of generation the right value for the property even
with CMake 3.16.
Remove the direct qt_android_generate_deployment_settings calls,
in preparation for their deprecation in public api.
Pick-to: 6.5
Task-number: QTBUG-88506
Task-number: QTBUG-88840
Task-number: QTBUG-108508
Change-Id: Ief1d0f9f620bd37beeedde26dedb66f728fa4a6f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Fixes issues with readback of storage buffers modified on GPU for D3D
and Metal. Adds unit test for storage buffer readback.
D3D
* Fixes issue where QRhiBufferReadbackResult::completed callback could
be called twice on buffer readback completion.
Metal
* Fixes issue where buffer readback occurred prior to command buffer
being committed.
Change-Id: If55ac005f4438d66d2f65ea2e1ee0d5686c884ff
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The object replacement character (U+FFFC) is used to represent
inline objects such as images in rich-text. To enable this,
we have special handling of it in QTextEngine. For classes
where inline images are not supported, it will just be hidden
from the visual text, which is unexpected.
Instead of always special-casing it, we make this dependent
on whether the document layout has registered any object handlers.
If they have not, then there will be no visual representation of
the object, and it is better to show the glyph for it.
For anything based on QTextDocument, there will always be the
image handler, so U+FFFC will still have special handling there,
but for non-rich labels and plain text editors the glyph will
be shown instead.
Note that there was also a bug in QLineEdit, where the object
replacement character was always replaced by a space. This was
introduced in 2007, in a patch which replaced a !ch.isPrint()
with a check for "the most obvious non-printable characters"
to reduce the number of characters that were not shown. However,
U+FFFC is a printable character and would thus not have been
filtered by the !isPrint() condition, so I think this was a
mistake at the time. However, due to the special-casing of
the character in Qt, it would not have had any effect until
now.
This also changes the QTextLayout::cursorToXForInlineObject()
test to actually test proper inline objects, as this was
previously using a hack which depended on the inline object
code to be used even for plain QTextLayouts with no handlers
for these.
[ChangeLog][Text] The object replacement character (U+FFFC)
is now only filtered out in rich text controls, where they
represent inline objects. In other controls, its glyphs will
be shown as with other text.
Pick-to: 6.5
Fixes: QTBUG-101526
Change-Id: I7fcaf2b10918feb41589e1098016efbf79a0e62d
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QBuffer::open() was only documented as \reimp, so its behavior
regarding WriteOnly was never actually described.
Add a test and document the outcome.
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I75c49cd3f6a1961bcaece4a92a4e479bb3300d36
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Use DocumentFile and DocumentsContract to support more operations
on content URIs, such as:
* listing files and subdirectories with usable content uris
* mkdir, rmdir
* creating non-existing files under a tree uri
* remove
And since dealing with content URIs require some level of user
interation, manual tests were added to cover what's been implemented.
Note: parts of the code were from from BogDan Vatra <bogdan@kdab.com>.
Pick-to: 6.4 6.2
Task-number: QTBUG-98974
Task-number: QTBUG-104776
Change-Id: I3d64958ef26d0155210905b65daae2efa3db31c1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
tests/auto/corelib/text/qbytearrayapisymmetry/tst_qbytearrayapisymmetry.cpp:1174:80:
warning: overflow in expression; result is -9223372036854775808 with
type 'long long' [-Winteger-overflow]
const qlonglong longMaxPlusOne =
static_cast<qlonglong>(Bounds::max()) + 1;
tests/auto/corelib/text/qbytearrayapisymmetry/tst_qbytearrayapisymmetry.cpp:1175:81:
warning: overflow in expression; result is 9223372036854775807 with type
'long long' [-Winteger-overflow]
const qlonglong longMinMinusOne =
static_cast<qlonglong>(Bounds::min()) - 1;
I usually build with GCC, but building with Clang for clazy-standalone,
so I saw these two warnings 500+ times, enough already. :)
Change-Id: Idd86af568ffe89ae49b2a3f9bbeedf312de5e631
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It looks like AAssetDir_getNextFileName is not enough.
Directories that contain only other directories (no files)
were not listed.
On the other hand, AAssetManager_openDir() will always return a
pointer to initialized object (even if the specified directory does not
exists), so we can't just leave only it here.
Using FolderIterator as a last resort. This approach should not be too
time consuming.
As part of this fix, add some unit tests to cover/ensure assets
listing/iterating works as expected.
Fixes: QTBUG-107627
Pick-to: 6.4 6.2 5.15
Change-Id: Id375fe8f99f4ca3f8cad4756f783ffafe5c074df
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Silence warnings such as:
variable 'sum_lookup_visual' set but not used [-Wunused-but-set-variable]
Change-Id: If38515d9753cf7b79a250985890a139e96e92329
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Cocoa's columnArray::count is an unsiged int, resulting in a compile
warning when QCOMPARE'ed with a signed integer literal.
Change-Id: I420a9e89bba5feeb9d8a040a06e6ba0e209c82f3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Variant-selectors are special unicode symbols which are used to
modify glyph selection for the preceding character. For instance,
a regular symbol could be turned into a color emoji using VS16,
the emoji variation selector. In order for this to work, however,
the font that handles the selector has to handle the full pair of
characters, so that it can apply the correct substitution rules.
One specific example of this was on macOS, where an airplane
symbol + VS16 would match the symbol to the default UI font but
the VS16 to the emoji font. Since there string provided for the
emoji font did not have any preceding character for VS16, we just
ignored it.
To improve on this, we now detect variation selectors that have
been matched to different font engines than the preceding
character. When such a case occurs, we check if the selector font
also supports the preceding character, and if it does, we keep
the pair together and use the same font for both.
[ChangeLog][QtGui][Text] Fix some cases where a variation-selector
character would be ignored in font selection and the correct
variant of a character would thus not be selected.
Task-number: QTBUG-108799
Change-Id: I9f427e0520e652ee2f24a4f7dc3c1957251e06bd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add storage buffer memory qualifier and run time array stride information
to QShaderDescription::StorageBlock.
Memory qualifiers allow more informed selection of RHI resource buffer
binding (bufferLoad / bufferStore / bufferLoadStore) function.
Run time array stride (for last block member unsized array) allows
packing of buffer data for transfer to / from GPU. Without this
information, applications must infer or guess which packing rules
(std430 / std140) are in use.
Change-Id: I676d7e848afefd40d01cdd463c569b07022b683e
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
In the process actually handle all time-spec cases in various places
that only handled UTC or LocalTime, or at least note that they don't
where that's not practical. Also tidy up header ordering and ensure
QDateTime's header is included wherever it's used, while adding the
include for QTimeZone where needed.
Task-number: QTBUG-108199
Change-Id: Ic1a5cdf0aaf737bf1396aa8ac58ce2004cef7e19
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As foreshadowed when QDateTime adapted to route all QTimeSpec use
through QTimeZone, this commit deprecates the old API in favor of the
newly more capable QTimeZone-based API.
Fixes: QTBUG-108199
Change-Id: I9a3f9f94d4a5d8cc229db72b3e4731a9e318a076
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Input events that originate from actual device interaction should reflect the
device's state, and device and events need to be kept in sync so that event
sequences (such as multi-touch events, where we have begin/update/end cycles
spanning multiple events) are working correctly.
For that reason, the event point data in pointer events is explicitly shared,
and we only detach in exceptional situations. This saves us memory allocations,
and makes sure that the event point data carried by events, and the event point
data stored persistently in the device, are kept in sync.
Cloned pointer events do not originate from device interactions, and should
therefore not sync back to the device. E.g. accepting a clone should not modify
the original event data stored in the device. There are exceptions here as
well, e.g. when cloning an event in Qt in order to deliver a translated version
of it to a different scene. Different points might even get delivered to
different scenes or windows, or at least different items in the same scene. For
that reason, we explicitly detach, and then explicitly write back the relevant
states after the cloned event has been delivered.
But in general, we should assume that cloned events do not write back to the
device. Since QEventPoint is an explicitly shared data type that never detaches
itself, we have to explicitly detach it when making copies that should not be
shared.
The ideal implementation of this would be to do the detach in the copy
constructor of QPointerEvent, which is called when cloning. However, Qt itself
makes copies of QPointerEvent without using clone, e.g. when assembling lists
of touch events for the different subscenes or windows in
QGuiApplicationPrivate::processTouchEvent, where event objects are added to a
QVarLengthArray<QMutableTouchEvent>. This makes copies, and those copies must
not detach.
So we have to implement the special cloning behavior in each override of
QPointerEvent::clone(). For this, introduce a dedicated macro for the common
member functions. This macro must be used for QPointerEvent subclasses.
Fixes: QTBUG-107560
Change-Id: I4b56f9e71c7d067ba9054a2a631e8ba5bc7b1ab9
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
XML does not impose any semantics based on the order of the attributes;
they're an unordered set. Quoting [1]:
> Note that the order of attribute specifications in a start-tag or empty-element tag is not significant
and [2] 2.2.5:
> An unordered set of attribute information items
Still, using a QHash-based implementation to store attributes is
annoying, because one cannot serialize the document in a stable way.
The order of attributes is going to depend on the QString hash function
(which we can change at any time) and the QHash seed (which is random
and changes at every run). In other words, saving the same DOM will
yield non deterministic outputs. That's annoying for testing,
reproducible builds, and so on.
Switching to an _ordered_ associative container for storing attributes
won't, on its own, ensure any specific ordering. That's because:
* attributes are currently kept associated using their name as the key,
ignoring an eventual namespace prefix;
* there's some convoluted logic that sometimes emits attributes in the
xmlns namespace (to qualify a prefix).
Hence, just go for the straightforward implementation and sort the
attributes before streaming them. In the main loop I could have used a
range-based for loop over the associative container used for attributes;
since it's a Qt container, it would have yielded just the values in the
map, and we are not interested into the keys. However I'm preparing for
further changes down the road, so I'm opting for key/value iteration.
I'm deliberately not offering an opt-out because:
* I don't think this is so expensive to justify an opt-out;
* I'm going to remove QHash anyways in a follow up commit.
[1] https://www.w3.org/TR/xml11/#sec-starttags
[2] https://www.w3.org/TR/xml-infoset/#infoitem.element
Task-number: QTBUG-76800
Task-number: QTBUG-25071
Change-Id: I6282ae2ccbee9c0099f138de48b94bb7c40b3680
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In the process, centralize the creation of date-time values, where
doing so requires catching invalid results caused by spring-forward
gaps; this saves some repetition and extends the treatment to more
places that did need it. Also, de-inline two overrides of virtuals;
being inline does them no good.
Replace the Qt::TimeSpec member of QDTEPrivate with a QTimeZone so
that creation of values can be streamlined and to make it easier to
add support for (currently unsupported) OffsetFromUTC and TimeZone
timespecs in the public QDTE API.
This greatly simplifies a lot of the code, while preparing it for a
long-needed extension to its functionality.
Task-number: QTBUG-80417
Task-number: QTBUG-108199
Change-Id: I0ac2c78025013bf89899e3ef1a56e89392f67ce5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This saves (mostly in corelib/time/) some complications that used to
arise from needing different code-paths for different time-specs.
Task-number: QTBUG-108199
Change-Id: I5dbd09859fce7599f1ba761f8a0bfc4633d0bef9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For now, just addDays() and the springForward() test, as proofs of
concept for future work to be more systematic.
Change-Id: Id2c4e9ad304d3aef6fdfb48ae6328df8c638c934
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Free most APIs using QTimeZone from feature timezone and route all
APIs taking a naked QTimeSpec via these, in preparation for their
eventual deprecation. Since qtimezone.h includes qdatetime.h (and MSVC
blocks our ability to remove the need for that), qdatetime.h's
declarations can't use a default value for QTimeZone parameters; so
add overloads taking no zone (or spec) to handle that.
[ChangeLog][QtCore][QDateTime] All QDateTime APIs involving a
Qt::TimeSpec can now be routed via QTimeZone's lightweight time
description support, saving the need to have different code paths for
different time specs. In the process, QDateTime gains a
timeRepresentation() method to return a QTimeZone reporting the
(possibly lightweight) time description it uses. (The older timeZone()
method always returns a non-lightweight QTimeZone, whose timeSpec() is
Qt::TimeZone.)
Task-number: QTBUG-108199
Change-Id: I23e43401eb2dbe9b7b534ca6401389920dd96b3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QTimeZone] QTimeZone is now always defined;
feature timezone now controls most of its prior API and some new API
is added, most of it always present, to enable QTimeZone to package a
Qt::TimeSpec and, for Qt::OffsetFromUTC, its offset. Prior to this
change, APIs using Qt::TimeSpec had to provide a separate function
taking a QTimeZone alongside a function taking a Qt::TimeSpec and
optional offset; it will now be possible to unify these into a single
function taking a QTimeZone. Adaptation of other Qt classes to do so
shall follow.
Task-number: QTBUG-108199
Change-Id: If5ec3cc63920af882ebb333bf69cde266b1f6ad7
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... where 50b05e3e2a originally added
them.
While qtversion.h is included in qglobal.h, using qtversion.h directly
is a tiny step towards removing qglobal.h includes from our code-base,
so don't let this opportunity go to waste.
Change-Id: I28eaca1f4e250fc9e12e2ce6a6f94670a1d08dbe
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This test makes use of a GCC extension-slash-defect in matching of
template template parameters. Either Clang has recently changed its
behavior not to accept them any more, or we've never compiled this test
with Clang.
Tested with Clang 15.0.6.
Pick-to: 6.4
Change-Id: I69ecc04064514f939896fffd172e98d826989ca3
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The 'QT_ANDROID_MULTI_ABI_FORWARD_VARS' variable allows to forward
variable values to ABI-specific external projects. The variable accepts
names of variables that needs to be forwarded.
Pick-to: 6.4
Task-number: QTBUG-107893
Change-Id: Iaa4fa7e98ad0df956d90f91e157edb561183c795
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add the full set of substringing operations:
- mid/left/right (old-style)
- sliced/first/last (new style)
- chop/chopped/truncate
The implementation is copied from QUtf8StringView, adjusted to use
sliced() instead of the (ptr, n) ctor, so we need to deal with the tag
twiddling only once, in sliced().
The documentation is also copied from QUtf8StringView.
[ChangeLog][QtCore][QAnyStringView] Added substring functions
sliced(), first(), last(), chop()/chopped(), truncate().
Change-Id: Ief454e9694519e97d9146fa84bc05dda1dded046
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test message sent to the dbus might never see a reply, e.g. in case
of a misconfigured dbus. Instead of waiting for a reply and stopping the
static top-level build, timeout after the CI had enough time to receive
the dbus message (5 seconds).
Change-Id: Ic6d60e7d1ddb2d864dc4a78d4edbd0ef7b6604c2
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Amends a874087504, which tested whether
d->container is nullptr to decide whether to hide the popup, and then
dereferences d->container later without checking again. This raised a
correct static analyzer warning.
Simplify that logic. hidePopup() does nothing if there is no visible
container, and we don't want to accept() the cancel key if there isn't.
So the closeOnCancel logic isn't actually needed, we only need to accept
the ShortcutOverride to make sure that QComboBox sees the Cancel key
even if there is a shortcut registered, and then we can handle and
accept the cancel key to call hidePopup() only if the popup is visible.
Add test to verify that this interaction works as expected.
Pick-to: 6.4
Task-number: QTBUG-108908
Change-Id: I60d92b068f0f5139d629cf4a58e225512170df77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In the process, split some long lines. The test relies on omitting the
hour (so as to get the default, 0) from both the format string and the
string parsed, so as to test that the parser correctly handles the
corner case where the zone skips the first hour of the day. This was
not entirely obvious when reading the row data, so make it explicit in
a comment.
Change-Id: I919b292b78bd399a8749806a0e913d43f5b414e1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Test a few more cases are correctly handled.
Change-Id: I7f286ba93f59bf0168cac789cd30590f40e98cee
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The spec deseralized isn't a Qt::TimeSpec; handle it correctly instead
of taking for granted that QDateTimePrivate::Spec's values happen to
match.
Change-Id: I67f3c960f3a3b90cdad3c1eca673f7ec8fd10b82
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mostly pedagogic checks in operator_insert_extract(), but also
sanity-checking, to confirm spec conversions produce results equal to
what each came from.
In daylightTransitions(), verify the spring forward goes from standard
time to daylight-saving time.
Change-Id: Ieb9c603ee2eadecea055da4e8889528161f4d999
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QCOMPARE(a, b) in place of QVERIFY(a == b), similar with
QCOMPARE_LT() and QCOMPARE_LE(); and use a scope-guard to emit a
message on failure instead of incurring the cost of building a string
for the message, even when the passing test doesn't need it.
Change-Id: I3884bc40e89a4b1ba881968b99faab27d4b1abc9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Principally to get Qt::LocalTime mentions out of the way ahead of the
QTimeZone work on Qt::TimeSpec, but also mop up trailing 0 parameters
to QTime for seconds and milliseconds.
Change-Id: I51041582faae100894a567c9e5ae96a60a3b2d8c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Left over from long ago, making confused use of Qt::hex.
Change-Id: I7f411e4888ee1a637d2212fd6976dd003f8da9ce
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Several were overlong (or soon to get so by being made longer); others
were inconsistent with neighbors; one was inconsistent with itself.
Change-Id: I272680499605a757e4827d27021bf234a91cf77a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a result, also make sure the test will fail if output to debug
stream doesn't produce the expected result.
Change-Id: I9914c9c41c8d8b79f32dfb8e0c735f12e2d59f5e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Put core includes all in a common form, sort alphabetically.
Remove a stray blank line.
Change-Id: I211c6b407f5e49d907cb065521883567f1dd30f4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Comparing to true and false doesn't enrich the output.
Change-Id: Ie26a3f3d584f88310b8d4a31cad07be8dc8cb646
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This got broken with the introduction of the compositor patch.
Change-Id: I7d85795eb537449855a4cce3c8b6b031095c3f7f
Reviewed-by: David Skoland <david.skoland@qt.io>
Same fix as in tst_qbytearray's QCOMPARE() in
cb9715557c.
Pick-to: 6.4 6.2
Change-Id: I2222d9015ae7121a2fbcf5b936b27de20e873064
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After this change, private CMake scripts are mostly live in
`libexec/`, except the `qt-cmake` which will stay in `bin/`.
This doesn't affect the Windows configuration.
- `qt-cmake` stays in `bin/`
- `qt-configure-module` moves into `libexec/`
- `qt-cmake-private` moves into `libexec/`
- `qt-cmake-private-install.cmake` moves into `libexec/`
- `qt-cmake-standalone-test` moves into `libexec/`
- `qt-internal-configure-test` moves into `libexec/`
In cases where `QT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS` is set to
ON, e.g., ANDROID, WASM, both Batch and Bash files will be generated
and placed in `bin/` and `libexec/` accordingly; in both cases,
qt-cmake and qt-cmake.bat will be in `bin/` anyway.
[ChangeLog][CMake] The private Qt CMake scripts, i.e.,
qt-configure-module, qt-cmake-private, qt-cmake-private-install.cmake,
qt-cmake-standalone-test and qt-internal-configure-test were moved
into $prefix/libexec on Unix platforms.
Fixes: QTBUG-107621
Change-Id: Ic4f4ec85f64d2ede0e208bca928959e30be906a6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This amends fccd419dd6.
If Harfbuzz failed on one of the items in a string and returned
zero glyphs, then we would exit the shaping loop. The mentioned
change fixed a crash related to this when the ignored character
was the only character in the string, but it occurred in a
subitem of a longer string, then we would return and fail to
lay out the rest of the string.
This popped up recently because an update to Harfbuzz has caused
it to return zero glyphs when applying the Apple emoji font to
an isolated variant character (see bug report). When we matched
the symbol to the main font and only the variant character to
the emoji font, we would get in this situation, and end up
exiting the shaping early.
[ChangeLog][QtGui][Text] Fixed a regression which would
sometimes cause text to disappear if the string contained
an unmatched variation selector character.
Pick-to: 6.4
Fixes: QTBUG-108799
Change-Id: I616ab1b2d33c2df731419c5ce06fbc578a625a32
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When Harfbuzz returns zero glyphs, this will typically be because
the character is ignored. We currently have no way to differentiate
this from actual error cases, so to avoid return the error glyph
for cases which are not really errors, we set the dontPrint flag
for this.
When we add a way to differentiate between error cases and non-error
cases later, we should revert this for the actual errors.
Pick-to: 6.4
Task-number: QTBUG-108799
Change-Id: I2a910d951b71c705fb4dd761fcfe3a942b3afa7c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
There is no technical reason why qFatal shouldn't support categorized
logging, nor have a streaming version.
There is perhaps an API issue, that is, a streaming syntax may encourage
users to do "too much":
qFatal() << gatherLogs() << saveDatabase() << ...;
and that sounds like a bad idea in case the application is in an
unrecoverable state that requires immedate terminatation (indeed,
through qFatal). I'd err on the side of providing the extra convenience.
This commits adds overloads of QMessageLogger::fatal to support
categorized logging (note that fatal messages cannot be disabled),
the relative qCFatal macro, as well as overloads for streaming.
[ChangeLog][QtCore][QMessageLogger] QMessageLogger::fatal now supports
categorized logging, for instance using the qCFatal(category) macro.
Moreover, qFatal() and qCFatal() now support streaming of values
to be printed in the fatal message.
Change-Id: Ia57f25f5c85fca97e5fcf27eaa760dbde09cba0e
Fixes: QTBUG-8298
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For both the [4, 7] and [8,15] length cases, we can perform the same
technique: perform two overlapped loads, zero-extend, then perform two
overlapped stores. The 8-character case could be done in a single
load/store pair, but is not worth the extra conditionals. And it should
have the exact same performance numbers whether we use non-overlapping
4-character operations or completely-overlapping 8-character ones (I
*think* the full overlap is actually better).
The 4-character operation is new in this commit. That reduces the
non-vectorized, unrolled to at most 3 characters.
Change-Id: Ib42b3adc93bf4d43bd55fffd16c257ada774236a
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Add handling for MYSQL_TYPE_JSON by treating it the same as
MYSQL_TYPE_BLOB (which is used by current MariaDB Server for a json
column)
Pick-to: 5.15 6.2 6.4
Fixes: QTBUG-101680
Change-Id: I4d4b0cdad73cd12e0db4df4021fddbd6a649c8ed
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QWidgetWindow dispatched only tablet presses to the toplevel widget if
no child was found at the position; other events, such as hover events,
were discarded. The tabletTracking test case even documented that
shortcoming in a comment.
Fix that by falling back to the toplevel widget for any event. As
before, only press events initialize the tablet grabbing target widget.
Remove the now unneeded parent widget from the test case, and move the
test class into the only test function that uses it.
Amends ea615b421b and
8fd6cef372.
Pick-to: 6.4
Fixes: QTBUG-108747
Change-Id: I79050f1e063931e439945f64b50712dcc1ecb18c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
For QSet, the key_type is const, so can't test assiging to it.
Pick-to: 6.4
Change-Id: I9d363ef3fe52646b937d6a422227b19c48fdaf1f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Because they are too convenient to leave out.
Change-Id: I844cfb794ce0f575c2c65075d9051b0b878a434f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure that touching any file that is part of a qrc resource
actually rebuilds the resource and the target that depends on the
resource.
Pick-to: 6.4
Task-number: QTBUG-107687
Task-number: QTBUG-108113
Change-Id: I1153dc13fee44ffe59d2685a8cb33303538b026c
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Overloading insert is a bit tricky since the size might change after
the conversion so either the tail has to be moved twice or a temporary
buffer is needed. For now, add an ineffective but simple overload as in
the case of the const char *s overload, and do the performance
optimization in a follow-up task (QTBUG-108546).
[ChangeLog][QtCore][QString] Added insert(QUtf8StringView) overload.
Task-number: QTBUG-103302
Change-Id: If01c216ff626da29abb43eb68d4de82824f3bfba
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The += operator is already overloaded to handle QStringView and
QLatin1String - add the missing QUtf8StringView overload.
[ChangeLog][QtCore][QString] Added operator+=(QUtf8StringView)
overload.
Task-number: QTBUG-103302
Change-Id: Iec6940bad7866310c826a130b98accebc3c82aa8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Add the missing overload, among other things it is needed to
implement QTBUG-103302.
[ChangeLog][QtCore][QString] Added append(QUtf8StringView)
overload.
Task-number: QTBUG-103302
Change-Id: I576f73c1919e3a1f1a315d0f82c708e835686eb1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
For the case of static builds. Also, remove somewhat funny comment
from the shared tlshelpers.h file.
Fixes: QTBUG-105046
Pick-to: 6.4 6.2
Change-Id: I2fd677a11b64df89c0ad0237e1014f5e80144c24
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test functions tst_QWidget::optimizedResizeMove and
tst_QWidget::optimizedResize_topLevel use a custom widget to record
paint events in a boolean.
Using QTRY_* or qWait() to wait for the boolean to become true stops
event processing upon consumption of the first paint event.
In case of multiple paint events, the next paint event will be recorded
in the next check and may lead to a wrong result.
This leads to flakiness on platforms generating multiple paint events,
openSuSE Leap 15.4 / XCB being one of them.
This patch replaces the boolean with a counter. It adds a
waitForPaintEvents method to the custom class, which processes events,
until the counter stops increasing. It returns true when paint events
have been recorded and false otherwise. It resets the counter after
each call.
It also removes the QSKIP on wayland, as the failure results from the
same reason.
Fixes: QTBUG-109093
Pick-to: 6.4
Change-Id: I59ee8bb4efeaf5417d5749d21e384bee89301ae0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Also add optimizations for more string comparisons and add tests and
benchmarks.
[ChangeLog][QtCore][QString] Added utf-8 case-insensitive comparisons
Fixes: QTBUG-100235
Change-Id: I7c0809c6d80c00e9a5d0e8ac3ebb045cf7004a30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I981213c296bafc81663b08c0f1f339bbd8a96485
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I3d81cf10b7eb74433ce5bea9b92ce6bce1230dcd
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
During the implementation of QString::append(QUtf8StringView) it has
become apparent that the testing is insufficient as it did not warn
about an extra growth. The following tests have been added that append:
- y-umlaut and greek letter small theta (2 UTF-8 code units => 1 UTF-16)
- devanagri letter ssa (3 UTF-8 code units => 1 UTF-16)
- chakma digit zero (4 UTF-8 code units => 2 UTF-16 code units)
- some combinations of the above
Note that this also affects operator_pluseq_data, which is basically
a wrapper around append_data.
Pick-to: 6.4 6.2
Task-number: QTBUG-103302
Change-Id: I09ed950e3f0e71ae9ae85a455f42e130887f1109
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This patch adds a manual test and the required work in graphicsview and
qwidget private apis to support stereoscopic rendeing. Basically it
works by doing the drawing in QGraphicsView::paintEvent twice, once for
each buffer. This way the scene items are rendered to both buffers.
There's also an update to resolvement in QOpenGLWidgetPrivate
so that multisampling works correctly.
[ChangeLog][Widgets][QGraphicsView] Added support for
stereoscopic rendering.
Task-number: QTBUG-64587
Change-Id: I20650682daa805b64fe7f0d2ba086917d3f12229
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Implements an adaptor from the notification signal of a Q_PROPERTY to
QBindable. The Q_PROPERTY does not need to be BINDABLE, but can still
be bound or used in a binding.
[ChangeLog][Core][Q_PROPERTY] Q_PROPERTYs without BINDABLE can be wrapped in QBindable to make them usable in bindings
Change-Id: Id0ca5444b93a371ba8720a38f3607925d393d98a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The test function tst_QComboBox::setPalette() tests if the QComboBox
correctly inherits its palette to its QLineEdit child, by directly
comparing both palettes after a palette change on the QComboBox.
If the application palette for both widget types contains brushes which
are either pixmap based or the resolve mask prevents them from being
copied, the direct palette comparison between parent and child fails,
despite of a correct propagation.
This patch sets a simple gray application palette for QComboBox and
QLineEdit at the beginning of the test. The QSKIP for macOS is
removed, because using simple palettes solves both issues.
Change-Id: I61d509745377306d6f8331dfc1ac189fc58cdedb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It started being recorded as flakey after making macOS 13 a significant
config in the CI, but it's unclear why the test was not failing during
the nightly testing leading up to that.
http://testresults.qt.io/grafana/goto/-AzSwMKVz
It has also been blacklisted on macOS many times in the past.
Change-Id: I7be5fefb3669e9643a98d2ac82059bf0576c6d5c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This test causes instability in the CI, but so far nobody could
reproduce it outside of that specific CI environment. Skip it for now,
and investigate the root cause later.
Pick-to: 6.2 6.4
Task-number: QTBUG-106906
Change-Id: Idbbc560236ac475fcb4fdd5980397393f7a95474
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When a widget's palette has different brushes in Active / Inactive
color groups, or it is pixmap based, multiple paint events are
triggered. This leads to unpredictable, double entries in
QWidgetRepaintManager::dirtyWidgetList().
This patch overrides event() of all test widgets and ignores
activation / deactivation events in order to make the entries of
QWidgetRepaintManager::dirtyWidgetList() predictable.
Pick-to: 6.4
Change-Id: I164d7ab4148551590ac3c50fcc3b9f98c5ac0535
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QXcbBackingStore::toImage() returns a QImage that differs from what
is displayed on the screen: After multiple moves of children within
their parent widget, the last move is not always properly reflected
on openSuSE 15.4.
This patch blacklists the test functions fastMove, moveAccross and
moveInOutOverlapped on openSuSE Leap.
Task-number: QTBUG-109036
Pick-to: 6.4
Change-Id: Ideb505570df090b25d30762492d9c60beb6641ff
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
They are already slow without ASAN, and risk running into timeouts with
ASAN enabled.
Change-Id: I427b990066d8ffa838ea90a318176fbcba400852
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Both QStringView and QAnyStringView implicitly convert from any
container with a fitting value_type, and working std::data, std::size,
std::begin and std::end.
Add these missing operations (and complementary ones) to XmlStringRef,
so it implicitly converts to QStringView and QAnyStringView, too.
Add a check to that effect and remove the now-superfluous operator
QStringView().
Task-number: QTBUG-103302
Change-Id: I89d586cf64447a82022e06d546d7ee8339fc6dc7
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Avoid using perl in CMake scripts. Remove the syncqt.pl specific
code.
Task-number: QTBUG-87480
Change-Id: I7fcd5cc83d173ec463c275b5b50b84f25044a118
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
I've reserved the IDs for int128, uint128, bfloat16, and float128,
because the mask in qvariant.cpp's qIsNumericType() requires primitives
to be less than 64 to operate properly.
Added a QMetaType/QDataStream test to confirm it is indeed built-in.
Change-Id: I3d74c753055744deb8acfffd17247f7f57bada02
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The C++ equivalent is std::float16_t, defined in P1467[1], and is coming
with GCC 13 both in native mode (for x86, using AVX512FP16) and in
emulated mode. The C and C++ types will be the same type (<stdfloat>
simply typedefs).
qfloat16 will need to remain a wrapper with an integer member to keep
ABI with previous Qt versions. Because it is a trivially-copyable small
type, it gets currently passed in registers; the presence of the integer
member means it gets passed in general-purpose registers, while a single
_Float16 member would be passed in a floating-point register. See:
https://gcc.godbolt.org/z/8fEendjff
[1] https://wg21.link/p1467
Change-Id: I8a5b6425b64a4e319b94fffd161be56397cb48e6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
... where checks for QByteArray existed before.
The checks we can't add are
- left/right/mid (legacy APIs not implemented in QBAV)
- several relational operators, d/t ambiguities. Created
QTBUG-108805 to track these.
Task-number: QTBUG-108805
Pick-to: 6.4 6.2
Change-Id: I30cc9b29a228d69d32af51234f2c28221478a75c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It's not intuitive, so check lest people break it.
Pick-to: 6.4 6.2
Change-Id: I2435cd69be7b77a6ae59cdc7b5fb99658cfc42fd
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was forgotten to assign a simple palette to this object in
1576f82721
This patch adds the missing line.
Pick-to: 6.4
Change-Id: I0acf765d9646ecc8d49791d96b5ea910e11997fe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We will need it in QML to determine which signal out of a number of
"overloads" to generate handlers for.
Task-number: QTBUG-108762
Change-Id: Ib73eeb59dbf037bd03faf0d841860d9ebc9e7032
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The algorithms for calculating the scene's position within the view
did not compensate for scrollbars showing. The scrollbars should be
ignored when positioning hte scene within the view, as alignment
only cares about the positioning of the scene when the view is
larger than the scene anyway.
Add a test case that verifies that items don't jump up or down when
dragging horizontally, and not left or right when dragging
vertically.
Mark variables in the modified function as const where applicable to
make it easier to follow the code.
Done-with: Volker Hilsheimer <volker.hilsheimer@qt.io>
Fixes: QTBUG-46757
Change-Id: If205637dfe124e0034f68201b23f174d6863084d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When a widget's palette has different active / inactive colors,
multiple paint events can occur. This makes tst_QWidget functions fail
when they expect a spcific amount of paint events and the platform
theme provides a palette with active / inactive differences.
This patch adds a function to populate test widgets with a simple
palette, to prevent multiple paint events.
Pick-to: 6.4
Change-Id: If9b2faedcc5ca87ba24991cedd5e4ac927b02644
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
After 109e088c7c, cache keys were unique
for palettes with different private or data instances, but the key did
not change when a palette without any shared copies was modified, as
that does not create new private data structures.
To fix this, always increase the counter for the private data structure,
also when not detaching from shared copies.
Augment test case with scenario that broke.
Pick-to: 6.4
Fixes: QTBUG-108709
Change-Id: I606abfb8b1a03e515e46b10dc840a631eb31d496
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Underflows should be treated the same as overflows.
Fixes: QTBUG-108628
Change-Id: I23aa7bbe1d103778cefca08bd3e584e72f306583
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The helper function TestWidget::waitForPainted returned after the test
widget had consumed the first paint event. In case of multiple paint
events, QRegion paintedRegions did not match the entire region that
was supposed to be painted. The test function children() failed/flaked
due to that.
This patch extends the helper function. After consumption of the first
paint event, it processes events until the painted regions no longer
change.
Pick-to: 6.4
Fixes: QTBUG-108764
Change-Id: I54e14bb07725dd1f602cc93085da13836e3b7494
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Skeleton tests included. Run the test with run.sh.
Fixes: QTBUG-107744
Change-Id: Ic2734e24025f8edc0f8e710d981367aa321f9066
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Rework QSimpleParsedNumber to store a qsizetype whose sign serves as
ok flag (positive is ok, zero and negative are not) and magnitude is
the number of characters used. This replaces an endptr that was set to
null to indicate !ok, but that deprived us of end-of-parse
information, which is needed for number-parsing. In particular, JS's
parsing of numbers accepts overflow (where qstrntod() flags it as
invalid) as infinity; so qstrntod() does need to say how long the
overflowing (but JS-valid, none the less) number-text was.
Modify all callers of functions using this (recently-introduced) type
and add tests that fail without this fix.
Fixes: QTBUG-108628
Change-Id: I416cd213e1fb8101b1af5a6d43615b970a5db9b4
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
tst_QOpenGLWidget fails on Linux when other windows on the desktop grab
focus. That can happen on CI VMs.
This patch blacklists the test on Linux as a temporary solution
Task-number: COIN-966
Change-Id: Ibdd7e626f92d2da692bd7c44741e0ca4c9dbd1a8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
tst_gestures flakes in MacOS arm and Linux when delivering a gesture to
a screen. The problem cannot be narrowed down to specific test
functions. When two test functions with gesture delivery to a screen
are called, the second fails.
This patch temporarily blacklists OpenSuSE for tst_gestures.
Task-number: QTBUG-104496
Task-number: QTBUG-106244
Change-Id: I3bc3c9b82567478784a84006d27f5cbed39d9c9a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is improved version of previous fix
013c346a8d that was reverted because it
broke some tests for Quick Text. The problem was that it did not work
correctly in the case the text was wrapped to a fixed width.
To deal with this we'll accumulate current line full width (as if it
hadn't been wrapped) in layout data (layoutData->currentMaxWidth).
Then when the next line is explicitly wrapped by line or paragraph
separator, this accumulated width will be used to adjust layout's
maximum width.
Change-Id: Iad7119d9808e1db15fe1fbc5db049c3db928529f
Fixes: QTBUG-89557
Fixes: QTBUG-104986
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This reverts commit e36abea63b.
Reason for revert: QTBUG-108470
Change-Id: If9aeae8be67594320d00dcdb42c993eda7acaeef
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
- If this string is not shared, modify it directly
- If this string is shared, instead of detaching copy the characters
from this string, except the ones that are going to be removed, to a
new string and swap it. This is more efficient than detaching, which
would copy the whole string including the characters that are going
to be removed.
This affects:
remove(const QString &str, Qt::CaseSensitivity cs)
remove(QLatin1StringView str, Qt::CaseSensitivity cs)
Adjust the unittests to test both code paths.
[ChangeLog][QtCore][QString] Improved the performance of
QString::remove() by avoiding unnecessary data copying. Now, if this
string is (implicitly) shared with another, instead of copying
everything and then removing what we don't want, the characters from
this string are copied to the destination, except the ones that need to
be removed.
Task-number: QTBUG-106181
Change-Id: Id8eba59a44bab641cc8aa662eb45063faf201183
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt 5, QWin(dows)Mime and QMacMime lived in the respective Extras
modules, which were removed and partially folded into the relevant
modules in Qt. QWindowsMime and QMacMime continued to provide the
abstraction for implementing built-in support for native clipboard
formats and UTIs within Qt, but only as private APIs.
After the recent clean up of those APIs and respective infrastructure,
we can now bring them back as public converter interfaces. Application
developers can subclass those and instantiate an instance of their
implementation to add support for platform or application specific
data formats.
These interfaces are not in the QNativeInterface namespace, as
applications don't call into Windows or macOS using those interfaces.
I.e. there is no class on which an application would call
auto *converter= nativeInterface<QWindowsMimeConverter>();
Also, since applications override those converter types, we do want to
guarantee binary and source compatibility.
[ChangeLog][QtGui][QWindowsMimeConverter] Reintroduced to allow
applications to add support for conversion from and to Windows-native
clipboard formats to MIME-encoded data.
[ChangeLog][QtGui][QUtiMimeConverter] Reintroduced to allow
applications to add support for conversion from and to clipboard data on
macOS and iOS to MIME-encoded data.
Fixes: QTBUG-93632
Change-Id: Iebd909c3970015d203f59d5ab15e306b3d312f6e
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This way we can run the test on macOS with the version 2.1
OpenGL context.
Amends 85a1663eb1
Change-Id: I8ec122fefaab54b35613e226e3937f4b51a7ea5a
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Test causes integrations on macOS to fail.
Temporary solution, fixing of auto test required.
Task-number: QTBUG-108402
Change-Id: I9ceef8ec425cdd5131bce0cfffcb4daf739e674d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Support for 1D textures on Vulkan, OpenGL, Metal, and D3D.
Change-Id: Ie74ec103da9cfcbf83fa78588cf8cfc1bd6e104f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The native implementation uses NSAlert, making a best effort to map the
QMessageBox properties to the native dialog, falling back to the cross
platform non-native dialog if the discrepancy is too big.
The initial implementation focuses on the current state of the
native dialog helper "protocol", but there's room for improvement
here, which would allow even more dialog types and properties to
be native.
[ChangeLog][macOS] Message boxes such as QMessageBox now follow
the platform look and feel by using native dialogs if possible.
Change-Id: I4da33f99894194a7b301628cd1fbb44d646ddf18
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Skip on crashing tst_qvulkan test
Blacklisted completer_data on qfiledialog
(8d76c5af51 should have been enough but
it is still failing)
Task-number: QTBUG-108328
Task-number: QTBUG-108329
Change-Id: Iad5573af60cca16d16ba0462293e276186e25653
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This effectively reverts a4a51f6a64
while solving the problem that change intended to fix by an
alternative approach: Swap the order of checks for rhi-based
flushing. Checking the widgets' wishes first was a mistake. We should
first check what is forced, e.g. via the env.vars. Then only move on
investigating the child widget hierarchy if there was nothing specific
requested.
This way having a QOpenGLWidget in a window and running with
QT_WIDGETS_RHI=1 QT_WIDGETS_RHI_BACKEND=vulkan will prioritize the
forced request (Vulkan) and so the QOpenGLWidget will gracefully not
render anything while printing the expected warning to tell what's
going on.
The expensive recursion plaguing the construction of larger widget
hierarchies is now avoided, that should no longer take seconds due to
walking the entire widget hierarchy of the top-level window every time
a new widget is added to it.
However, this then uncovered a set of problems concerning native child
widgets. The repaint manager seems to have an obvious mistake where
the usage of rhi (and so textures and whatnot) is decided based on
'widget' (which is either a top-level or a native child) instead of
'tlw' (which is the top-level with the backingstore). The usesRhiFlush
flag only really matters for a real top-level, not for native child
widgets. The rhi-based flushing is tied to the backingstore, and the
backingstore comes from the top-level widget.
Finally, make the qopenglwidget autotest to actually exercise
something when it comes to QOpenGLWidgets (or their ancestors) turned
native. The original code from a long time ago does not really test
native child widgets, because it turns the top-level into native which
is quite superfluous since the toplevel is backed by a native window
(and a backingstore) anyway.
Pick-to: 6.4
Task-number: QTBUG-105017
Fixes: QTBUG-108344
Fixes: QTBUG-108277
Change-Id: I1785b0ca627cf151aad06a5489f63874d787f087
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
saveRestoreGeometry() somtimes creates a 29px offset when debugged in
Qt Creator, which makes the test fail.
This patch adds a code comment to make developers aware of this fact.
Pick-to: 6.2 6.4
Change-Id: I920bd02eb7543faf8b25a0a242b888f3a3745e2a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
multipleToplevelFocusCheck() occasionally failed on XCB because
QApplication::activeWindow() was nullptr immediately after
qWaitForWindowActive() returned true.
This patch replaces QCOMPARE on QGuiApplicaiton::activeWindow() with
QTRY_COMPARE in order to continue spinning the event loop until the
condition has been met. It adds QWidget::activateWindow after show()
to ensure focus is acquired also when another window has received
focus in the meanwhile.
Pick-to: 6.2 6.4
Change-Id: If84eb8b77c5a6b16af271334a1fe5eb92c05644b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test function raise() occasionally failed because of unexpected
paint events being counted.
This is due to a QTRY_VERIFY returning after consumption of the first
paint event. If more than one paint event got posted, it will be
delivered and counted when no more paint events are expected.
This patch ensures that all paint events are consumed before resetting
the count and expecting no more paint events.
Fixes: QTBUG-68175
Pick-to: 6.2 6.4
Change-Id: I3e91a34e851da4bd01c7429e824d2b9101077a06
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The uses of the click_cocoa_button() function was removed in 2012,
in ba21ca7b5b.
Change-Id: If7abfc56bb307cfbf9f6628cec9c7267a8a1f31f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This tests that strings using the first Unicode code-point of such a
multi-character token don't get recognized as "valid" number strings.
This would catch an implementation issue if the parsing code
mistakenly matched against only the first code-point of each "single
character" token.
It also adds tests of integer formatting, with multi-character sign,
and reworks some QStringView().toString()s to use u"..."_s.
Task-number: QTBUG-107801
Change-Id: I7b868ce2955bb322b3ecfc200438a21437090a0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Based on those for QString, but with locale variation and exercising
some of the locales with multi-character signs and exponents.
Pick-to: 6.4 6.2 5.15
Change-Id: Id0253449f9abcc154285f89337aa0e26dd69900d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Based on the tests for QString::number(), but run in reverse, with
some embelishments. Also moved some shared code from number_*_data()
to their shared number_integer_common template.
Pick-to: 6.4 6.2 5.15
Change-Id: I74e7082372166c3cdbcd6bcbc31f9003e07cbcbc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Upon programmatic window state changes, windowStateChange was fired
once in QWindow::setWindowStates and once when the visual state had
been changed by the window interface.
This patch adds if guards to ensure that the singal is fired only once.
It adds a corresponding autotest to tst_QWindow.
tst_QWidget::resizePropagation() is adapted to no longer expect double
signal emission.
Fixes: QTBUG-102478
Pick-to: 6.4 6.2
Change-Id: If093c0a883d76d8a676e4fab90db6b0676452267
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a complex object (i.e. one with children that are themselves not
fully exposed objects) gets focus, then we need to inform the
accessibility system about which child object actually has focus. This
was only done for item views, but not for other complex widgets.
An editable QComboBoxes is the focus proxy for its line edit. The line
edit never gets focus itself (QComboBox forwards relevant events),
and is the accessible child item with index 1. So when an editable
combobox gets focus, it needs to raise the automation event for the
line edit child.
Implement QAccessibleComboBox::focusChild to return the interface to the
lineedit for editable comboboxes so that the UI Automation bridge can
correctly notify about the focus being moved to an editable text input
field.
Fixes: QTBUG-107572
Pick-to: 6.4 6.2
Change-Id: Id60e2791ec859365255baa9bfd01547979cd2b44
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
For a11y purposes, a table needs to be mapped into a logical
accessibility hierarchy. There are several ways of doing this mapping,
and unfortunately macOS expects something different than what
QAccessibleInterface does.
So suppose we have a a 2x2 QTableView with both horizontal and vertical
header like this (the names reflect the QAccessible::Role names):
+-----------+--------------+--------------+
| | ColumnHeader | ColumnHeader |
+-----------+--------------+--------------+
| RowHeader | Cell | Cell |
+-----------+--------------+--------------+
| RowHeader | Cell | Cell |
+-----------+--------------+--------------+
In order to be presented to the screen reader on a platform, it goes
through two rounds of mapping:
QAccessibleInterface will have all headers and cells as direct children of the table:
- Table
+- ColumnHeader
+- ColumnHeader
+- RowHeader
+- Cell
+- Cell
+- RowHeader
+- Cell
+- Cell
macOS expects a deeper hierarchy:
- AXTable [QAccessible::Table]
+- AXRow [Qt:no eqiuivalent]
+- [QAccessible::Cell] (The content of the cell, e.g. AXButton, AXGroup or whatever)
+- [QAccessible::Cell] (The content of the cell, e.g. AXButton, AXGroup or whatever)
+- AXRow
+- [QAccessible::Cell] (The content of the cell, e.g. AXButton, AXGroup or whatever)
+- [QAccessible::Cell] (The content of the cell, e.g. AXButton, AXGroup or whatever)
+- AXColumn (this seems to just store the geometry of the column)
+- AXColumn (this seems to just store the geometry of the column)
+- AXGroup (this represents the column headers)
+- AXSortButton (clicking a header cell will trigger sorting)
+- AXSortButton (clicking a header cell will trigger sorting)
It's unclear to me how RowHeaders are mapped (they are rarer than
ColumnHeaders, I expect to find them in e.g. spreadsheet applications).
I haven't found any native usage of them. So this patch simply ignores
them.
Notice that macOS have a three layer deep hierarchy to represent a table
(Table->Row->Cell), while QAccessibleInterface has a two-layer deep
hierarchy (Table->Row/Cell).
In the macOS bridge we therefore need to "inject" the Row/Column element
to be "between" the table and the cell.
The table will take ownership of all row and column elements that are
children of the table. These elements are not inserted into the cache
(it would be pointless, since the cache is basically just a mapping
between the QAccessibleInterface -> QMacAccessibilityElement, and the
row and column elements does not have a corresponding
QAccessibleInterface to be mapped from).
The rows and columns are therefore also created as soon as the table
element is initialized, and they are stored in two NSMutableArray
members of QMacAccessibilityElement.
A table is constructed like any other accessibility element, with a
valid axid and synthesizedRole set to nil.
Each child row and column element is constructed with the same axid as the
parent table element, and they will have the synthesizedRole set to
either NSAccessibilityRow or NSAccessibilityColumn.
With the synthesizedRole member we can then identify if we are a row,
column or the actual table, and implement their respective behaviors.
Notice that the child row/column is created with the parent's table axid
in order for them to have a way of finding their parent table element.
(there is no 'parent' member variable in QMacAccessibilityElement)
This glorious scheme isn't pretty, but seems to work.
Fixes: QTBUG-37207
Change-Id: I7c2451e629f5331b9a0ed61dc22c6e74a82cc173
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When comparing a glyphIndex with a hard coded number, the number is
cast to an int, whereas the glyphIndex is an unsigned int.
That causes a compiler warning.
This patch forces the numbers to be cast to an unsigned int.
Change-Id: I8a31124c6afacfc4ecfb13caf2cb8133dad44a21
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Debug serials and detatch numbers of deep and shallow detatch in test
function cacheKey, if it fails.
That implicitly removes a compiler warning about these variables being
unused.
Change-Id: I481f4b63e3ed0d50fb442dffc658b97d913059bc
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
And add license headers and some minor fixes for warnings in the
example and test.
Task-number: QTBUG-90498
Change-Id: I34592f7f2844c92c25a6a676c8ac1ffca9e03c6d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The usage of the helpers was removed in 2011,
in bf8dfc394a.
Change-Id: I950812982148fd76bcc65c4781a144c21cb3c901
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The lock and unlock of the Android deadlock mutex is now part
of the internal implementation instead of limited to the enum
based permission API. It is unclear why 8bca441b6f added
the guard only to this API and not to the string based API
as well.
The check for isBackgroundLocationApi29 has been removed,
as the logic seemingly resulted in accepting every single
permission type except location permissions if used via
the enum-based API.
Since Android's platform permission API doesn't have an
Undetermined status, we keep a hash of the status for each
permission type, and by default checkPermission() would
return Undetermined, until a requestPermission() call
is done which updates the internal hash, and after that
checkPermission() would return properly Granted/Denied.
Task-number: QTBUG-100413
Change-Id: Ia95c76af754481a281bc90198e349966c9c2da52
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Most of them were easy to change. The pair one was a bit of a stretch,
but still worked. I've removed the lines on QPair, since QPair is
std::pair in Qt 6.
Change-Id: I3d74c753055744deb8acfffd17246ec98c583d08
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
qIsNumericType does not return true for enum types, which meant we never
called numericCompare() or numericEquals() when one of the types was an
enum.
Task-number: QTBUG-108188
Change-Id: I3d74c753055744deb8acfffd172449c68af19367
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The code implementing the C++ rules of type promotion and conversion
was too pedantic. There's no need to follow the letter of the standard,
not when we can now assume that everything is two's complement (this was
true for all architectures we supported when I wrote this code in 2014,
but wasn't required by the standard).
So we can reduce this to fewer comparisons and fewer rules, using the
size of the type, not just the type ID.
Change-Id: I3d74c753055744deb8acfffd172446b02444c0c0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Generate bc file using the "new way".
Task-number:QTBUG-106331
Pick-to: 6.4
Change-Id: I70d2c0e5026636deee1b8389f50f51e075187b76
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
qWaitForWindowActive was called in two test functions without
activating the relevant widget.
This patch adds widget activation before calling
qWaitForWindowActive.
Helper function verifyColor:
A loop made six comparison attempts of widget size, pixel color and
image with a 200ms waiting time after each unsuccessful attempt.
The widget size was tested at the beginning of the loop.
The test was failed on the first size mismatch, which occurred when
verifyColor was called before the widget was rendered.
That has lead to flakiness (e.g. on openSuSE).
This patch encapsules each check in a lambda and calls qWaitFor to
ensure event processing until each condition has become true.
Change-Id: Ic98f93c8acf41459bc728f2969fe8b01768048dd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Follow-up to 8222e06d12, which only reset
the item repaint count.
Flushing the queued paint events will bump numRepaints, and the whole
point of calling reset() is to prepare a consistent state before the
next test, so we need to call it after flushing the events.
Pick-to: 6.2 6.4
Change-Id: Id1fe840c14c0940d7020cf8f8cc6a3aeceaa5fb5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This patch replaces the first instance of QCOMPARE with QTRY_COMPARE /
QVERIFY with QTRY_VERIFY after a call to QWidget::grabGesture.
It re-groups verifications so that the verification of the highest
event count is on top.
The test function customGesture is skipped if
QGestureManager::deliverEvents cannot establish a target to deliver
the custom event.
Change-Id: I8188559a40ed5be86f3c6e9c82fa54a97ce5d7d6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The insets used to calculate the correct height were not the best
choice. It used display cutout insets which would work correctly on
most devices, but in the case of an emulator or a device without a
camera, it could fail to calculate correctly.
Task-number: QTBUG-107604
Task-number: QTBUG-107709
Task-number: QTBUG-107523
Pick-to: 6.4 6.4.1 6.2 5.15
Change-Id: I8c4da83ae7359a0c133dbeb02dbd2cd260565f78
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Setting the flag QSurfaceFormat::StereoBuffers does not actually do
anything, because we do not utilize the extra buffers provided. We need
to expose setting the correct buffers using glDrawBuffers between draw
calls.
Change-Id: I6a5110405e621030ac3a2886fa83df0cfe928723
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Flushing the queued paint events will bump numRepaints, and the whole
point of calling reset() is to prepare a consistent state before the
next test, so we need to call it after flushing the events.
Pick-to: 6.2 6.4
Change-Id: Iaefc9854caafe82c65c9587e18fd081439e8dda6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The qfiledialog test was failing on completer_data test. The fix
available for Android 11 also works in Android 7, so removed the if
clause.
Task-number: QTBUG-105377
Change-Id: I76a4c1073a754c9b299cfe731f42b80da1a6f8e2
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
