Previously, the code was in the constructor, where hwnd was 0 and
ChangeWindowMessageFilterEx() failed. Move it into
QWindowsSystemTrayIcon::ensureInstalled() after the creation of the message
window.
Change-Id: Iff4c6d6d6b11bdcace7514ad421c96c94e52bbba
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Use the NIS_HIDDEN flag of the NOTIFYICONDATA structure to prevent it from
becoming visible before show when calling NIM_ADD with the icon data.
Fixes: QTBUG-73185
Change-Id: If5cc5a4930a889623a5cac84138185ad04765ece
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
For some reason behavior of SecureTransport has changed from 10.12 to 10.13
and then to 10.14. On 10.13 SecureTransport fails upon receiving the server's
certificate with 'Unrecoverable error', before we can do a manual verification
and accept the certificate as trusted. Analysis of available source code
shows that they, apparently, do not like MD5 hash which our server is using.
Until certificate is updated on the server or we switch completely to
the Docker-based solution we have to BLACKLIST tests that connect to our
current network test-server. Oddly enough, on 10.14 SecureTransport is
less mean.
Task-number: QTBUG-69873
Change-Id: I7da1883e0970a2f6ddd8385f193b76116d6983e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Commit 5712c62d1c introduced a regression
for item texts which were aligned right or horizontally centered. The
layoutRect was calculated wrong and started below zero and later the
correct x offset could not be calculated since QTextLine::x() does not
return a calculated value.
Fix it by first calculating the complete string and pass it completely
to QTextLayout::draw() instead trying to draw the single lines on our
own - QTextLayout has a better working algorithm so no need to reinvent
the wheel here.
[ChangeLog][QtWidgets][ItemViews] Fixed a regression with wrongly drawn
centered/right aligned item texts
Fixes: QTBUG-34133
Fixes: QTBUG-56759
Fixes: QTBUG-72805
Fixes: QTBUG-72869
Change-Id: I0ed521c3a9d35446d190ac22aa9f2374814fd278
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Cleanup the EditableItemModel example:
- include own headers first
- use nullptr
- add sanity checks
- use for loop instead foreach
- use const where possible
Change-Id: Ib36e5710c07979576b48a905ee50908a64dcb697
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
XML expects '.' as the decimal separator, but when using normal
%f formatting we end up depending on the user's current locale.
By using QString::number() we tap into qt_doubleToAscii which
forces the use of the C locale, giving predictable output.
Fixes: QTBUG-73227
Change-Id: I04d1adae2ef079442605e962007e5ce3fce896b7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The code path for re-generating the texture already has the unlock, but the
non-regenerating code-path was missing an unlock, causing asserts when the
graphics buffer was then attempted to be locked (again) at a later point.
Change-Id: Ic65add838360079829b7e81d7c1cfe2274959059
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Based on Asmo Saarela's advice (QTPM-686), adapted on advice from
FrogLogic support and converted to a feature so that the selftest and
testlib qmake config can be co-ordinated.
Task-number: QTPM-1385
Change-Id: Icd706f086009e1e08b3f8c5cd553f792402e28c0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
COMPOSE_CONVERT_WINDOWS_PATHS is supported by Docker and available
for you to configure the docker-compose command-line behavior. It
enables path conversion from Windows-style to Unix-style in volume
definitions. Users of Docker Machine and Docker Toolbox on Windows
should always set this to true.
Change-Id: Ib59756ad68482fdd889ce39ab1ab0118b5fc9071
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Currently only available for the OpenSSL backend to use but doesn't
actually rely on anything OpenSSL specific.
Move it so it can be used by the Schannel backend in an upcoming patch
Change-Id: Ia29b153bf3f29cff0d62a41ec5dd7d4671a18095
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
While it's not common it still occurs, perhaps especially with 127.0.0.1
Can be tested by attempting to connect to https://1.1.1.1/ using Qt.
Change-Id: Idad56476597ab570b8347236ff700fa66ab5b1f4
Fixes: QTBUG-71828
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This was especially a problem on Wayland where both "text/plain" (us-ascii) and
"text/plain;charset=utf-8" are typically available. I.e. we would prefer ascii
over utf-8, losing special characters.
Fixes: QTBUG-54786
Change-Id: I985f66e16fcd5125e800c86c4d3949d210e939ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Since some databases are case sensitive if part of the query is quoted,
then we should ensure that all instances of the table name are escaped
unless the test is delibrately testing the non-escaped case.
As a result, this commit also removes some expected failures pertaining
to PostgreSQL and also adds an entry to the list of tables being dropped
when a test is finished.
[ChangeLog][Sql][PostgreSQL] QSqlDatabase is now stricter about table
names when used with record() and primaryIndex(). If the tablename was
not quoted when it was created, then the table name passed to record()
and primaryIndex() needs to be in lower case so that PostgreSQL is
able to find it.
Fixes: QTBUG-65788
Change-Id: Id1f54cb66b761c39edf858501b730ede7eec1fd3
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QFile/QFileInfo::readLink() functions are obsolete but were not marked
as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: I52424dc5441e1f5b01015713df990bbec5186caa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
QProcess::finished(int)/readChannelMode()/setReadChannelMode() are
obsolete but were not marked as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: Iedbfd80a3c987f35caf93181e9277913a18961d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QDrag::start() is deprecated since Qt4. Therefore annotate it with
Q_DEPRECATED so it can be removed in Qt6.
Change-Id: I5b82c482fa579f357cc67e38b86e6fe587f18ded
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Cleanup the Widgets examples - replace foreach with range-based for loop
in the remaining directories
Change-Id: I321e6c0f414401a1ae4fb65762b97d894b725afa
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Cleanup the Widgets examples - replace foreach with range-based for loop
in graphicsview subdirectory
Change-Id: I9093b3ae89d73d0b860d29929943881c90074bce
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Cleanup the Widgets examples - replace foreach with range-based for loop
in mainwindows and painting subdirectories
Change-Id: I3c1556dffd22e29dd0a5ba960e699291c496278a
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Martin Smith <martin.smith@qt.io>
Mark the following obsolete functions as deprecated so they can be
removed with Qt6:
- QDataStream::unsetDevice()
- QDir &QDir::operator=(const QString &path)
- QDir::addResourceSearchPath()
- QResource::addSearchPath()
- QResource::searchPaths()
- QSettings::setSystemIniPath()
- QSettings::setUserIniPath()
Change-Id: I5edfb2b4ce1ad843fa5fcd5b4c475ab9352b05f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of stepping down to 4 pixels, then 2 px, then 1, with
essentially the same code, let's use maskload and maskstore to only load
and store the effective portions (instructions new in AVX2). The
secondary loop gets run at most twice, since there can be at most 7
pixels left.
This fixes an off-by-4 bug in the previous implementation (lines 1041
and 1186 should have had 7 instead of 3).
Change-Id: I4d4dadb709f1482fa8ccfffd157862e77ac508f6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change b86d0b6215 rearranged the
sequence of function calls when generating code adding QTabWidget
and QToolBox pages, not taking into account that the iconCall()
has a side effect (writing out icon definition) Revert that part
and add a comment.
Fixes: QTBUG-72980
Task-number: PYSIDE-797
Change-Id: Ie8fbaa36f21cd4408fb1f491195da5c260708e6c
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
about why a certificate was revoked (if it was) and the responder's
certificate, if we managed to verify a signature, as was previously
shortly discussed in the 'OCSP stapling' patch-set. Auto-test update
will be in a separate patch.
[ChangeLog][QtNetwork][Ssl] Added class QOcspResponse as a part of
OCSP stapling support.
Change-Id: I4e17fb6fc4c3dae0b8ad04ff2897a4823736d16e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the flags is not needed.
Change-Id: I546381b1722c9c846e2412e56763563b8f625212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the enum is not needed.
Change-Id: Ibd04b1fd4f0f914c7224a007fc248d4ebabcde3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Setting the fall-back network interface of danted's environment to eth0
by docker-compose file is redundant because the value of danted's
configuration (danted.conf) has been set to eth0 by default.
Change-Id: If2dea8daaf851577a573e201e9c50684916e5206
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
For macOS and Windows, the test-server containers are deployed in the
VirtualBox (Boot2Docker). Because Boot2Docker is a lightweight Linux
distribution made specifically to run Docker containers, it doesn't
install avahi-daemon and support mDNS discovery.
To resolve this problem, Docker compose file supports "extra_hosts" to
add hostname mappings inside containers.
BFAIL items:
tst_QNetworkReply::headFromHttp(...+proxy...) (ten cases)
tst_QNetworkReply::ioGetWithManyProxies(http-on-http)
tst_QNetworkReply::ioGetWithManyProxies(http-on-http2)
tst_QNetworkReply::ioGetWithManyProxies(http-on-multiple-http)
tst_QNetworkReply::ioGetWithManyProxies(http-on-http+socks)
tst_QNetworkReply::ioGetWithManyProxies(http-on-ftp+http+socks)
tst_QNetworkReply::ioPostToHttpFromSocket(...+proxy) (twelve cases)
tst_QNetworkReply::ioPostToHttpFromSocket(...+proxyauth) (ten cases)
Change-Id: Iec55966a9b5f191b7446985a15b49a8b09dcf407
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Docker compose file supports variable substitution. When running
docker-compose up, Compose looks for the environment variables from
shell and substitutes the values at runtime.
Change-Id: I5255ead82276fac7db24ee74af453f83ca20bbe6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no docker bridge on Windows. Docker document recommends using
port mapping to connect to a container. The problem is that it causes a
port conflict if the user is running a service that binds the same port
on the host. This change applies the same solution of macOS to deploy
the docker environment into VirtualBox and use the host network option.
Task-number: QTQAINFRA-2294
Change-Id: Iedcb8daa39373f02adb59f02eae2775f02870c54
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Apparently, it is not enough to just retry 10 times (10 seconds) in the
CI network. It happens from time to time that a test fails due to server
port is unreachable. Especially, the docker containers are running in a
virtual machine on Windows and macOS platforms. In such cases, it needs
more time to warm up the service depending on the system loading.
Change-Id: Ia0234bff2a82988b62f451e20b50671708784008
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
With the current distribution, this is 90% of active devices, and
it was released in 2014. Qt 5.12 is LTS and will continue to support
older Android versions for a long time to come.
This is to reduce the testing needed on outdated platforms and
allow ourselves to use some newer APIs unconditionally in Qt.
Android 21 was chosen because it is the minimum version that supports
64 bit builds.
[ChangeLog][Android] Increased the minimum supported Android version
to Android 5.0 (API level 21).
Fixes: QTBUG-70508
Change-Id: Ia7b4345e42ca05a25a292f11ccbb8cbd692cf8f0
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Cleanup the widgets examples - replace 0 with nullptr
Change-Id: Id4bf119b9a41f6d10117f3a613a6e604128fa196
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Incorrect order of elements in manifest
---------------------------------------
The <application> tag should appear after the elements which declare which
version you need, which features you need, which libraries you need, and so on.
In the past there have been subtle bugs (such as themes not getting applied
correctly) when the <application> tag appears before some of these other
elements, so it's best to order your manifest in the logical dependency order.
Change-Id: I647c6eed71b678f4df65a00fbd51135b93959e11
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
error #68: integer conversion resulted in a change of sign
Change-Id: I4ac1156702324f0fb814fffd156f80962df6b4a7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This has been removed in emscripten compler version 1.38.23 and will
cause building apps to fail.
Change-Id: I7e58053ce06053f6f1d577377b503cabb035bb58
Fixes: QTBUG-73143
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Set the inherited properties as resolved on the font, so non-default
values are passed on in contexts that does resolve logic like QPainter.
One test is updated as it actually tests what it is supposed to on
more configurations.
Fixes: QTBUG-39560
Change-Id: Ief668e992ccdc091337a259a4c1306a00e67c73f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Adds support for Schannel, an SSL backend for Windows, as an
alternative to OpenSSL.
[ChangeLog][QtNetwork][Ssl] Added support for Schannel on Desktop
Windows. To build Qt with Schannel support use '-schannel' during
configure.
Task-number: QTBUG-62637
Change-Id: Ic4fb8ed3657dab994f9f4a4ac5cbddc7001a0a46
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add qWaitForWindowExposed() for the toplevel and use QTRY_VERIFY()
for finding the delegates consistently.
Change-Id: I430088a91b5cc1a8f856d0a58aba066b1baf179b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
All vivante functions return void* even when the actual native type
(EGLNativeDisplayType, EGLNativeWindowType, etc.) might be typedef'ed
as something else, as they do when the CFLAGS from egl.pc are now used.
Task-number: QTBUG-73038
Change-Id: I7650b691663201d03d8c15ead155aa3c231fba29
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
