... supported on the new test server. Once the new server image is in
place, we can only allow for the new life time hint of 300 seconds.
Task-number: QTBUG-33040
Change-Id: Id6ad9983789cc6badf3fc2f6628bf79379988201
Reviewed-by: Richard J. Moore <rich@kde.org>
Currently the QDateTime::addDays/Months/Years methods copy all the
d member variables themselves, but this is bad practice as it means 3
more places where we have to get the copy code correct. Instead use
the copy constructor to do what it's meant to. This saves more changes
when we add proper OffsetFromUTC and TimeZone support.
Change-Id: Ie2641d0cb58405335206edcce2e2db30702b78bf
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The minimum SDK version supported should be set to 9, since this
is required by Qt. We also set the target SDK version to 14, since
this will remove certain compatibility features, like the overflow
button in the action bar.
Task-number: QTBUG-30860
Change-Id: Iddd0eba2e802d03c5fe6e9b5da626808bbbad71d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Previous name caused a conflict with another page with the same name.
This page will replace the one in qtdoc.
Task-number: QTBUG-32580
Change-Id: Ifda8841feaab4def6c16972a027947f75ccb7739
Reviewed-by: Martin Smith <martin.smith@digia.com>
The unit tests were caching the original TZ value to restore later
after testing with different TZ values. The problem is reading TZ will
return a null value if no override TZ value is set, and if you then set
the TZ to null the system assumes UTC and not the system time zone.
Instead we need to unset TZ if it was null to start with.
Change-Id: Ib0625b1712e565f9fdfa99e2ffe1e5d74f059354
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
use the new parser flags to report all i/o errors directly.
as a notable side effect, the "WARNING" prefix is gone (even though
it is still treated like that, which is mildly insane to start with).
Change-Id: I084375d5e7a3314ae763795f7c318804a9fb84b6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this doesn't actually do anything in qmake.
Change-Id: I908fc3792bdc321370e51be98adf7a9c81e37a85
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qttools/e1f3732197ef77a29cb7f3c1ce094b3f31a7b689)
(cherry picked from qttools/226f013441990aa4a58f7c82e284057cff659959)
This allows platforms to dynamically alter their keyboard
shortcuts, for example if they are user-configurable on that
platform. Current behavior remains the same.
QEvent previously used the hardcoded values in QKeySequencePrivate so
this was modified to use QKeySequence::keyBindings().
In order to keep the speed of QEvent's former binary search, we moved
this code to QPlatformTheme::keyBindings(), making it faster for all
keyBinding lookups.
As we now need to search by StandardKey instead of by shortcut the list
is reordered and a test is changed to reflect that.
Change-Id: Iefb402fbbe8768be2208ce036f3c2deed72dcc6c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Currently the default for QSplitter::opaqueResize is hard coded,
which is less than ideal. Instead this should be provided as a
style hint via QStyle so as to give a more uniform look to all
applications.
Change-Id: I5711811f7b672e36aafcd292ed320308570a0390
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Instead of loading HB face in QFreetypeFace::getFace(), defer allocation
until the first FT font engine for that face gets initialized;
then, QFreetypeFace "reparents" and manages the loaded HB face.
Change-Id: I2ac8ead4c6ed25d341af9c9cf0c34dfb979f8390
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This tests crashes a lot lately.
Task-number: QTBUG-29684
Change-Id: I6892238dc071f050b0208dd5b4843629fa707347
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Created QTBUG-33067 for tracking the issue, after some debugging.
Change-Id: Iaf5556db2e0858e40a7cf6c9dbbe7e6fd6120bac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This reverts commit aa1b4c0943.
It turns out that the bug is caused by a different mask constant
in Windows 8 which should not take effect in pre-Windows 8.
Change-Id: I1ad502262dae42856c07d48ee3bc9dc032ab379b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The first word of the .name variable of each extra compiler is
used as a key in a container that keeps track of them. See also:
qmake/generators/win32/msvc_objectmodel.cpp: VCProjectSingleConfig::filterForExtraCompiler
qmake/generators/win32/msvc_vcproj.cpp: VcprojGenerators::initExtraCompilerOutputs
Task-number: QTBUG-32912
Change-Id: I7ea5c58884db559621f50740075b7f2e4e3ef7f8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Since it's possible to call the function on an
empty model, return failure in that case.
Change-Id: I0a0eabe917da3e6294bdd616a85579f6dc894ec8
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
XI2 sends events for individual touch points, but QTouchEvent
sends all of them with a stationary state if they didn't change.
If a touch pressed event is received, and the next XI2 event
is about a different touch point, we wouldn't update the state
of the previously pressed touch point.
Change-Id: I1ebcbea1cea54872064ef7710e2aac7b0b41cd70
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
C99 defines the "I" macro in complex.h. qobjectdefs_impl.h can be
indirectly included in user code, which raises the possibility of a name
clash if the user's compiler supports C99 and the user includes
complex.h
Change-Id: Ie79ec7baf2d49a34b66a01556c7e57324303dc04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The tests use local coordinates, but window->geometry() gives the
global position on the window, i.e. offset by the size of the
decoration.
Change-Id: Id63ffd7e160b77ddb0f5563d8c3c65c36ad45e89
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
After change 4dbf574b7a touch worked
only if XI2_DEBUG is turned on. That is because it creates the
QTouchDevice and calls QWindowSystemInterface::registerTouchDevice,
which must be done at startup so we can receive events.
Change-Id: I9446d72bc702fbd819bf26bcdc2a3d657180f642
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
We don't use exceptions anyway, so we can safely ignore this warning.
Task-number: QTBUG-32833
Change-Id: Id78cb99770f37a076de3a95721ba40795a8a7b57
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
With a _NET_WM_PING message, a window manager can check if an
application still works or if it froze. The WM sends such a message to
the application window and the application sends the message back to the
root window.
Since change Ia04268b0 / commit d8090022f "Move the X11 system tray code
from widgets into XCB-plugin.", Qt selects StructureNotifyMask on the
root window. Due to this, we now also receive replies to _NET_WM_PING
and treat them like a _NET_WM_PING request.
This caused an endless loop as soon as any _NET_WM_PING was seen where
Qt would send a _NET_WM_PING to itself and handle it again and again.
Fix this by ignoring _NET_WM_PING messages that are sent to the root
window. According to EWMH, such messages can only be replies to
_NET_WM_PING and GTK does this, too.
Task-number: QTBUG-32957
Change-Id: I1b0aa682f99b17d633baacc14b18b3adca7a1aba
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
QThreadPool::clear() method removes all queued QRunnable.
When a large number of long-running tasks are queud in a
QThreadPool its destruction, which calls waitForDone(), can
be quite long.
QThreadPool:clear() removes (and deletes when appropriate)
all QRunnable that have yet to be started from the queue
enabling a faster interruption.
Change-Id: Ie5d6028ad3cfe7e439d1db068c8d0936ff818db9
Reviewed-by: David Faure <david.faure@kdab.com>
In our benchmarks this makes removeLast more than twice as fast.
(That is on my core I7 laptop with gcc on linux).
It changes the alloc test to be an assert rather than an if.
Change-Id: Id55195b9b7880e54a89be4dd9d6228d94aff23c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We kept using qInstallMsgHandler in testlib to not break test cases using
it too. However, this breaks tests using qInstallMessageHandler ...
ChangeLog: QTestLib: Test cases have to use qInstallMessageHandler instead
of the (deprecated) qInstallMsgHandler
Task-number: QTBUG-32391
Change-Id: I3bd95d9b0a48749243a5dd3e074df8ebcbc07dce
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This patch fixes the warning uncoverd by the -Xlint:unchecked option
by parametrising the generics with wildcards.
src/org/qtproject/qt5/android/QtActivityDelegate.java:315:
warning: [unchecked] unchecked call to getMethod(String,Class<?>...) as a member of the raw type Class
Method m = initClass.getMethod("setActivity", Activity.class, Object.class);
Change-Id: I665e9dfd6d64c92a491d68c838ad02bde275d604
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Though the worst case memory usage was improved in
b800d8b94a the best case usage changed.
Since best case is the same as worst case in Qt5, we should
use as little as possible, which this patch ensures.
We reduce the memory usage from 3 to 2 ints per section - which is
half of worst case in Qt4. There seems to be no bigger cost in
performance doing that. The recalcSectionStartPos is still very fast.
This patch limits the maximum section size to (2^20) ~ 1.000.000 pixels.
This alleviates
Task-number: QTBUG-32325
Change-Id: I9b7530030a31b4e35cf1ca9e32c6b936f5ea9790
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
