We need to figure out where to draw the line when it comes to warning
about unknown compiler (Clang), Xcode, or SDK versions, but for now
building with Xcode 4.6 should not be an issue. We'll have to revisit
this and test with the full set of compiler/Xcode/SDKs we support
before the final release.
Change-Id: Iac3ec3a25c0f7618b2c3714657d147f17f834d97
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
At some point we want to build with C++11 support, but for now we silence
the warning.
Change-Id: I40deb0925d459eaf06e324dddc0a2e9893c57615
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The QStyle code uses the global qApp->devicePixelRatio(),
which queries the screen, not the window.
Implement QIOSScreen::devicePixelRatio().
Change-Id: I0091e5793f8d07ab7a46b6de443edd9457dcff85
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Make sure that the user cannot activate a window
that is modally shaddowed.
Change-Id: Ib92be319d017460bbc1ef63ad7556cb4758dfa6c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
When adding modal windows into the mix, raiseOrLower became
even more messy to write. So do it the usual way instead, and
add a windowLevel variable to each QIOSWindow that we
can sort on. The code becomes more readable, and we can handle
more window types correctly.
Change-Id: I348352473a7d8cf9909c17c1b074b2fe3fab9819
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Track touch events during the standard [Began -> Moved
-> Ended] event sequence based on the UITouch pointer
which stays constant.
Enable multiTouch on Qt's UIView.
Mouse events should now be automatically created
from (unhanded) touch events by QGuiApplication.
Reviewed by: Ada Sørvig (fingerpaint app approved)
Change-Id: I2aeb48c962c697d8b8337f8ceab062070c2a4240
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This to ensure that the keyboard does not close prematurly.
This can happen if the user opens up the keyboard while typing
inside one window, then switch window, continue typing while
the other window gets deleted.
Change-Id: I5cfb1673ccbe4d5aaa14167b7aa53451031089a1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Dispite the name, 'requestActivateWindow' means raise and transfer
focus to the window.
Change-Id: Ib97321ed7ec8da90e924ff8155a95896c12160c9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
When a QWindow becomes visible, it should move to front and
be active.
Change-Id: Icab12c6031c0cc8d791e4f8cc49b9c2d5c73100d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Probably not going to be the most used functions on iOS, but
implemented to support old widget apps out of the box. The
implementation stacks both staysOnTop and popup windows on
the same level for simplicity, since iOS does not have a
concept of z-ordering UIViews (UILayer has z-order, but layers
belong in a different hierarchy, and cannot be used in this
respect).
Change-Id: Idd68e5ceea7d4eaeb3066486c47400930cebb1b0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Since our QWindows are UIViews rather than UIWindows, we need to
implement window activation manually. This patch will ensure that
the window touched by the user also gets keyboard focus.
Change-Id: I9390c5c8e50a4b066cd1320a2a044e02f2a9f75d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The lifetime of an FBO is tied to its context, so letting each window
manage its own FBO failed when the window tried to delete the FBO
at destruction time without the proper context being current, or
even available anymore.
We solve this by moving all handling of FBOs to the context itself,
which is fine as we're exposing the necessary bits from the window
to allocate storage based on its layer.
Change-Id: I8c7c96cf63d6b667527c816f10ac2f4ff6a05e0c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
It's already built as part of the iOS platform plugin.
Change-Id: I5a97e8723b566b9ef15aafce374be35f01e6cf08
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This is handled automatically by the default implementation.
Change-Id: Ia9bd0143490e6f2507ede03f3654a2b0b00e3e3d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The delegate is only used when we control the application, so we know
that there isn't any window yet.
Change-Id: Ibd774cb4fd8ceaab6a181769d2792b569f490495
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Qt will tell us when the window should be visible. Showing all
windows by default makes e.g the desktop widget visible as
well, which causes problems with activation of windows.
Change-Id: Ibf2283bc5f009df7ff23126f4dd04ec898141720
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Try to keep qiosglobal.h free from unnecessary includes, since its
typically included from many different locations.
Change-Id: I6638bcaef1189b3eee3dbd5f744c15f8f7858d71
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Since the OS does not handle window management for us, we need
to handle this ourselves. So when a QWindow is closed or hidden, we
transfer activation to the top-most visible window. This will fix
application unresponsive after closing a dialog.
Change-Id: I83f836ebafa71edca5ab5ae3a2bdba7cd1decbc1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Adding a simple way to get the QWindow pointer from any UIView
makes writing code where you only have UIView pointers a bit easier.
Perhaps we should also investigate if it is worthwhile to make
this category public to the application, to further enhance
working in a mixed environment.
Change-Id: Ic263003dc7683a8d976024cbbbc2558e8472a790
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Not the biggest gain, but since all the members of EAGLView are
declared private, we might as well move the whole interface into
the source file. We can then make the members public without
caring about interface readability. We will make use of this in
a following patch.
Change-Id: I144fb5748573ca6faf257d72597907b5c17b1e05
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
It seems that we need to access our view controller from many
places, and the syntax to do so is tricky to remember. So lets
just add it to our global functions, with the added bonus of a
using a little cache.
Note: many of these functions could be made inline, but since one
concern of the plugin will be the end size of the app, I prefer
to trade size for speed at this point. We can always change this
later.
Change-Id: I578ea9ae8218d23d635b7728a930763ca53c4eaa
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
configure.prf checks if MAKEFILE_GENERATOR is set
to something it can work with. ios/default_pre.prf
unsets MAKEFILE_GENERATOR.
This breaks QtMultimedia at least. Add special case
for iOS to configure.prf and set QMAKE_MAKE to "make".
Change-Id: Ie8feaeefe4a932d735a0cd4c09e869ca1341aae5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
QScreen geometry and orientation is updated a bit after we
change geometry in QPlatformScreen, which this time was enough to
break availableGeometry. Since this function is for internal use, we
let it be based on internal data.
Change-Id: I7701b0a6043839c89c01e87242decb8a739d00f1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
We need to update primary orientation when the rotation starts, and
not when it ends, so that we are in sync with the resize that happens
to the backingstore upon layoutSubviews.
Change-Id: I466a2d135e6c15550c6207c9659871629d748b73
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
QInputContext expects us to report whenever the
input panel changes geometry. This patch implements
this.
Change-Id: I9162f0d48da6925274a7489c9bcb6adab9afae82
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Several places in the code we need to check if the plugin is
running as a cross-platform Qt application or inside a
native app. So we refactor this function to qiosglobal so
we can access it from everywhere.
Change-Id: I78db0dcde71b7d281868ce304867c8f876caef2a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Some functions are needed across several files and classes. Lets
place them in a common file for all to use.
Change-Id: I5f9b578f948d66d10e57a835b80b5c493e07fb4c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
From the documentation for QAbstractEventDispatcher::flush(), this
function does only make sense for X11.
Change-Id: I7f445b67b283f60c9a30ac00837beb44e8205d8b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Scale the OpenGL paint device size and physical dpi
by the device pixel ratio.
Change-Id: I8b576f23129aafc47371795151c548663e94ad52
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
When QScreen is created, we need to check if the application
is already in landscape.
Change-Id: I653c622154a5c23ec93e89ec3e80fefb6b1f1bdd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Clean up a bit. The orientation conversion functions belongs to
QIOSScreen more than QIOSOrientationListener. And rename them in
the same go to follow toQRect/fromQRect standard.
The orientation listener itself is tightly coupled to QIOSScreen, and
does not make much sense on its own, so move it into QIOSScreen to
follow the same patteren already implemented for QIOSInputContext.
Change-Id: I8b6b4d08a42349b4232749d59d46748297083536
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Qt expects the screen to change geometry when the "desktop" rotates.
On iOS, we interpret this as when the root view controller changes
orientation, since after all, this is the surface we place QWindows
on top of.
Change-Id: Ia00e68c8f9f0a65aefcc60518ee544fb260d4595
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Without a platform theme implementatin we were relying on
QCoreTextFontDatabase::defaultFont() to return the system font.
This didn't work because it reported the system font that iOS reports,
'.Helvetica Neue UI', which is a private font that does not get added
to our font database. The result was that we picked the first font in
the list of known fonts -- in this case 'Academy Engraved LET'.
We now implement QIOSTheme::font(), which takes precedence over the
font database's default font, and hard-code the system font to
'Helvetica', since Qt does not yet have the concept of private
system fonts.
Change-Id: I901cf9c2b662ea2795212376b84b8391be2efbbe
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This change will add an initial implementation of the
QPlatformInputContext for dealing with the keyboard.
Change-Id: I29c1cfbbebb8456977b8a1db0e966973cd2c24a5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
When QWindow is told to show/hide, we need to show/hide the
backing UIView as well, otherwise the window will still be
visible on screen.
Change-Id: I806fdd8bb4afacbbc1c9c7381ba0a31195ee04ac
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
We need to remove the view that backs QWindow when the window
is destroyed. Otherwise the view will still be visible on screen,
but now with a dangling QWindow pointer. This fixes a crash that
happens when closing dialogs.
Change-Id: I9053c83c6db80a39f4f71a63993cc7ae73fc4196
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This is an intermediate heuristic until we have a proper API in Qt to
deal with auto-rotation and orientation locking.
Change-Id: I433992fa1c18d1670987f79e405a4501b6e5d365
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We keep track of the with and height of the FBO's buffers, and update
their storage if the window size has changed since last time.
Change-Id: I97788b69e7067a5b5b9f28e8498cf1bc5d2cf6ea
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Treating the paint-device as a thing wrapper around the OpenGL paint engine
failed when the window was resized, as the paint engine would clip the
drawing to the old size. We need to update the size in beginPaint.
QBackingStore resize still behaves like before, and we emit a warning if
the user tries to resize the backing-store to some other size than the
window size, as that's not a supported use-case for our iOS backing store.
Change-Id: I1a0eeb65fa9db8b5538dc69963d6fc84be6e63f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
It turns out that QWindow::geometry needs to be updated manually
by the platform plugin, and not indirectly trough
QWindowSystemInterface::handleGeometryChange as first assumed.
We now always report the _actual_ geometry of the UIView (which
also takes the status bar into account) to QWindow, and remember
the _requested_ geometry of the window to use whenever the state
of the window changes.
Change-Id: Iea940173d26fb6af701234379cae914215dae984
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Since UIScreen is orientation agnostic, we need to look at the
view of the top level view controller instead to determine
available geometry.
Change-Id: I3789ab7972a9970e46fbc8af81f2b7199e5ca5d1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Tell the view that backs QWindow to autoresize itself when
the superview (view of the root view controller) changes size.
This will typically happen when the device changes orientation.
Change-Id: Ib7c4dff9112d57f60012d3f0837677e09088bcaf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
