A bunch of empty and never-to-be-used directories makes the build tree
noisy and harder to navigate.
Change-Id: Iebef91c82d58a8d6a0047fb5439d50eb6806f557
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
There was a mismatch of how we sanitized paths for dependencies of the
target and how those dependencies were sanitized (or not sanitized),
resulting in the target depending on 'some/path/foo.o' while the
extra compiler target was named 'some/path//foo.o', with an extra
slash. This confused 'make' enough to decide that it didn't know
how to build the dependencies for the target.
Change-Id: I181b86c291286cbbbb1f7b4c3b929a5f1dc163a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The pattern ${QMAKE_ needs to be at the beginning of the line, or not
start with a $ (which would make it a regular qmake variable).
Also, it's fine that the variable is of the QMAKE_VAR_foo type, as
these variables are resolved at generator time, but are constant
and do not depend on the inputs. This means we have to replace
extra variables in the output.
Change-Id: I21ad24ae770f2137e2d5d92a20ee54e2f3f4ca06
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as a side effect, this fixes the generators that were more bitrotted
(nmake and even more mingw).
Task-number: QTBUG-30644 #close
Change-Id: Iefa3f07125884412d091aa12b44935e5b1fb858a
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
replace() doesn't detach if there is nothing to do.
Change-Id: I845b585c766f44a670ca3af1fc11ba03e7317622
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... as that is the CWD of the command (since b139e7e96e5c).
leave the resolution relative to $$PWD as a fallback with a warning.
Investigated-by: Harald Hvaal <hhvaal@cisco.com>
Task-number: QTBUG-19352
Change-Id: I75de9444a647cd9e6f509e3d8eb3382dc985e5ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
makes for less visual noise and a tiny bit more efficient code.
Change-Id: I587707fa4e2dc9bead9435bf5caf3a98ab680725
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
These timestamps were useless and broken on non-ascii locales.
Change-Id: Iad08eb0f5dfd5e86f6451d6572365d0c080e6115
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This makes it possible to properly parametrize alternative compilers.
Change-Id: Iaf0961c47875ee16d815356f36acf5652577cdca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
unlike unix' mkdir -p, windows' md complains if the directory already
exists. the workaround is a quite complex command, so the so far used
concept for assembling the command line from pieces was replaced with a
single template. for symmetry, adapt the makefile existence check to the
new concept as well.
QMAKE_CHK_EXISTS and QMAKE_MKDIR_CMD were added, with hard-coded
fallbacks (ugly).
QMAKE_CHK_FILE_EXISTS and QMAKE_CHK_EXISTS_GLUE (introduced in 5.0.0)
are simply deleted again.
QMAKE_CHK_DIR_EXISTS and QMAKE_MKDIR remain for legacy reasons, as qmake
emits them into the Makefiles, and custom commands may rely on their
presence.
Task-number: QTBUG-28132
Change-Id: I3d049cb5d26947e5c3d102d0c2da33afb2a95140
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
d28073d9 creates a distinction between "mac" and
"macx". The latter is not set on iOS, which caused
MakefileGenerator::target_mode to be set to TARG_UNIX_MODE.
Check for the "mac" active config instead of "macx".
Rename TARG_MACX_MODE -> TARG_MAC_MODE.
Change-Id: I7192788c33f5723034ba76da2492379dd454f0ab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
this makes it possible to properly parametrize alternative linkers.
Change-Id: Ia9cf574544a0259975470366d278b6c5dc747906
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The Libs: line of the pkg-config files is constructed
by taking the name of the .pc file itself, and stripping
off the path and extension. However, the code which does
this does not handle path separators correctly when the
target OS and local OS are different. To get around this,
the custom string manipulation was replaced with a call
to QFileInfo::completeBaseName(), which can handle the
different path separators correctly.
Task-number: QTBUG-29700
Change-Id: Ia817b415d303b249f56fcc3d1f073cae99c43046
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
introduce the QMAKE_PKGCONFIG_FILE variable for that purpose.
this is another feature that is needed for a bugfix ...
Change-Id: I08f470e1b2b7dd318af9195330c15d813fcd55ef
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Metafiles such as .prl and .pc files contain paths that have to be
adjusted during installation. The same code is used for unix and
windows so move it into the base class.
Change-Id: I82db89ec83820a4fa0214ba15e7cd63438f6dc91
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
these variables are somewhat magic: they are relative to DESTDIR, and
they also specify the installation location relative to target.path.
the actual output directories are created by other code.
Change-Id: Iead3006057516f5a49b6fd4bd8996a062c984fce
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
nmake depends on a variable being assigned before it is referenced, so
just write it out to every Makefile as the very first thing.
this is nicer than the previous hack anyway.
Change-Id: I50f409919352f560f7ef6c848a2f7c51d1878148
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is necessary for having a clean way to recurse even from leaf
makefiles.
the location where the variable is written in the makefile is somewhat
bizarre, but the code is so convoluted that finding a better place would
mean either a lot of duplication or a lot of prior refactoring.
Change-Id: I68e4cf7e3814f6c60b2e3421d69775c993dafb23
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this should be fatal, but so should be a lot of other conditions.
Change-Id: I0c2c0bb9590ea1e4d0eae76e29eda34915914217
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
DEPENDPATH merely says where to look for impliciit dependencies, not
where to find explicit ones.
fwiw, the other way round may be considered correct, but DEPENDPATH
exists for the sole purpose of limiting which paths should cause
recompilations, so it would be counterproductive to extend with with
VPATH.
Task-number: QTBUG-11912
Change-Id: I86450b5fd5aeb1f1b015b53f0adcd167ff4ce04d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The content in the prl file is not compatible with what CMake
expects in the value of the IMPORTED_LINK_INTERFACE_LIBRARIES
property. That property expects a list of IMPORTED targets or
full paths to libraries.
The prl file gives us a whitespace separated string of content
suitable for passing to ld, that is, it contains -L and -l content.
As this would take a lot of error prone parsing in cmake code in
order to resolve the content to a list of full paths to libraries
(which can be processed by any cmake generator), it's better to
remove the code until qmake is able to generate a list of full
paths.
Change-Id: I72fe8e862b7f3bd25a7f9a03db94d2e9b815d08a
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The generated CMake files need to pass ';' separated libraries to
the IMPORTED_LINK_INTERFACE_LIBRARIES property, otherwise we get errors
such as this:
http://testresults.qt-project.org/ci/QtTools_master_Integration/build_00386/win32-msvc2010_Windows_7/log.txt.gz
(grep for QtCore5.lib.lib)
Rather than a naive and error prone replacement of whitespace, generate
the appropriate ';' separated content directly in the qmake prl file.
Change-Id: I8eb5e233a0318b57ec74b86d910583ff99c29415
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I9c9964703dedfdab6e7bfac80be22bd5570e2e49
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is a monster commit which does the following things:
- import the evaluator as-is from qt creator into qmake/library/
- integrate it into qmake's makefiles
- overwrite proitems.h with actual special types
- remove the parts of Option which are redundant with QMakeGlobals
- make QMakeProperty a singleton owned by Option::globals. the dynamic
handling so far made no sense.
- make QMakeProject a subclass of QMakeEvaluator, with relatively few
extensions
the changes to existing qmake code outside project.* and option.* are
minor. implementing the changes gradually would mean changing a lot of
code which will be just replaced in the next commit, so i'm not wasting
my time on it.
Change-Id: I9746650423b8c5b3fbd8c3979a73228982a46195
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is preparation for adapting to a new evaluator.
Change-Id: I6fc59f5525735754a00afa6629fbfe257e84db97
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this may have worked a decade ago, but now it only produces funny
Makefiles (and needs hacking main.cpp). the feature doesn't seem *too*
important, so just clean it out.
Change-Id: I50a60b0e30341f0b523e4a5731c770c9c1013f8b
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't read the spec from scratch for every library just to get
QMAKE_LFLAGS_RPATH. we can perfectly use our current project for that
purpose.
Change-Id: I4e408b3fd5de81652181df032aa53cd8f2f8f806
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
By putting object_with_source into CONFIG one could force qmake to
output each object file into the same directory as its source file
came from. This was a rather nasty work-around from Qt 3 times to
support source files with the same file name in a project.
Unfortunately this doesn't play nicely with shadow builds.
Change-Id: Ie79e14d36ba6eac4219edc14ea75ab6a96f9ea96
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of re-assembling a list from the variables, take the original
command line minus some explicitly stripped out options. this is way
less code and poses no synchronization problem between the two parts.
as a "side effect", variables obtained from $QMAKEFLAGS won't multiply
with each makefile nesting level, as the generated command line won't
replicate data obtained from the environment.
Change-Id: I5d1ce0f11efb338f60405529f9818910103b1b0e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this adds a .base "member" to the install "structure". if specified, only
this much is stripped from the front of each element of .files, rather
than the entire path, to obtain the target filename.
Change-Id: Ic39fcf71c4ad874ffabbbad113be9cdc6e3f7260
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't make a single string, but a string list which is join()ed in the end.
this is a tad slower, but the code is way easier to work with.
Change-Id: I1ff7168c2770998761a6081be8080c743ddc94a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
make a proper stringlist of commands, and join it in reverse order
only at the end. the reversal ensures that we can cleanly fold up
directory hierarchies we may build.
Change-Id: I9a241361588a6965283aec5258e1d622b35514e0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
