tst_QSharedPointer can't create a pipe as the OS has too many files
open. Systems like macOS have a lower limit to these simultaneous files
open.
Task-number: QTBUG-60410
Change-Id: I21e89f992ada2a7d09b706522a05b5952f00ec33
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is a followup to 77a8e90cdd which
didn't handle the case where no columns had been moved.
visualIndices and logicalIndices are empty until initializeIndexMapping()
is called, in which case appending is wrong.
As a result, visualIndex(i) would return -1 for the values over
those added by read(), and an assert would happen at painting time.
The fix is to leave visualIndices and logicalIndices empty if
they are empty already, leaving it to initializeIndexMapping()
to fill them later if necessary (e.g. when moving a column).
Task-number: QTBUG-60837
Change-Id: Ia7e4b9d3122647984acd434dfaa0400df319d065
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
They have been blacklisted on windows previously and now fail on
macOS 10.12 as well.
Task-number: QTBUG-60993
Change-Id: Ib7a3acfc7f2285c0a587d4abd88a4a218391d623
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test has been observed to be flaky on Windows. Introduce
QTRY_VERIFY_WITH_TIMEOUT for diagnostics.
Change-Id: I72abdd2e5544f8f35199876486ab15151f60e5f2
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
According to the test metrics this test failed 10 times in the last two
days. Interestingly the log shows that usually 5.5 seconds would have
let it pass.
Change-Id: I38f21f35bd6624f1d3de1e1e811a4d107136a241
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
There was only one place that needed it.
Change-Id: I067fcfe299b34ab6a771fffd14bf2945f1953d10
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QPainterPath could in certain cases where sub-path points were on the
border of a rect fail to calculate intersects() correctly.
The patch adds handling of such cases by looking if end points cross in
or out of the rect. Other cases are already caught.
Task-number: QTBUG-31551
Change-Id: I6284da8ff8646d4636702923a76362302dde5767
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Known to fail now and then, most likely due to the mouse cursor
moving while the test is executing.
Task-number: QTBUG-60754
Change-Id: Id8f0786416d0df33f197a7a8f99b7aad1341a6be
Reviewed-by: Liang Qi <liang.qi@qt.io>
On winrt, the default application version is determined by its
manifest file. The template's default version is 1.0.0.0.
Additionally addRemoveLibPaths should not fail if libraryPaths
only contains currentDir.
Change-Id: Ifdd517f1bfe2fdf641f3d728ebe1fa144df1a8ca
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Found by GCC 7.
Change-Id: I90267617a038558e5b5213c598a949baf8d4d9be
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
CI metrics show that this test was flaky ~38 time in 3 days.
The problem is old: after we get a surface, a window manager can still
decide to re-position the window.
The fix is to simply send the touch event in a position where it is sure
to hit the window (usually the offset is the title bar height).
The blacklisting seems to not have worked, I could reproduce the failure
on a linux/xcb machine.
Change-Id: I5229fe020ba75c984fd3b6c322ad00d769707573
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This commit fixes two bugs:
1) Two ranges should not be merged if they are of different columns.
The old code would have merged (0,0) with (1, 1). Tranforming a selection
of just two indexes in a rectangle of four indexes.
2) The QItemSelectionRange appended had wrong column and worked only for
indexes of the first column. For example if 'tl' was (0, 1) than br was (0, 1)
so the QItemSelectionRange would have be ((0,1), (0, 1-1)) so ((0,1), (0,0)).
This QItemSelectionRange is invalid because topLeft columns is greater than
bottomRight column. The fix take in consideration the bottomRight column.
Task-number: QTBUG-58871
Change-Id: I591ef0bcc63926f24a7b1ced002af9b7737a4b6e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
... and update the unittest accordingly.
Compared to the 1.8 release there is one change in freedesktop.org.xml,
the magic for application/x-java-keystore was changed from host32 to
big32, as done upstream, see https://bugs.freedesktop.org/show_bug.cgi?id=99328
Task-number: QTBUG-60608
Change-Id: I47de71c9396cfc3eabc884d5679c73a3e4850a17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The conditions checked are compile-time conditions anyhow.
Simplify or strenghten a few conditions while at it.
Change-Id: If07f2aedca4c3632d852a8fdb2b3f7eb55a96c93
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Backtrace logging tests were not passing for arm when -O2 option was used.
Set "-fno-inline" on for the app whose backtrace is to be inspected.
Task-number: QTBUG-59966
Change-Id: Id1bbf78c31dc524357a30c7d39c239689621b155
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The operator double() and operator long double() members of qfloat16
are causing cast ambiguities. This removes them, leaving only
operator float() which seems to be adequate.
Also, additional arithmetic operator tests were added which without
this removal fail to compile.
Change-Id: Id52a101b318fd754969b3de13c1e528d0aac2387
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They're deprecated since C++11 and removed in C++17.
Change-Id: Ia2acd9312707bfee96838743645a04ae1780e5dd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The existing QHash::operator== does not work when the same
keys appear in different order between the two hashes being compared.
However, relying on iteration order on a QHash is (as usual) a bad
idea and one should never do it.
Task-number: QTBUG-60395
Change-Id: Ifb39a6779230e26bbd6fdba82ccc0247b9cdc6ed
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test was disabled because it was checking if we had the right
permissions. It does seem as if the permissions do not matter as
long as everything is in process though.
As seen by the regression in fafdb171e0
it's important to run the test. This regression would have been
caught.
Change-Id: Ia1938e683badd1de2657aa6dc8a3b3bbe430e8c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Return an empty size if no suitable entry found to avoid mismatch with
the returned pixmap()'s size (the QIconEngine::actualSize() returns the
originally requested size).
Change-Id: Ia278719a54392b62c5f9fc0529476baba5cd7df0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
There were still two cases where spurious notifications would be
possible:
- user calls hasPendingDatagrams()/pendingDatagramSize() on UDP
socket somewhere outside the slot connected to readyRead()
signal (::WSARecvFrom posts FD_READ notification, even if
a notification for incoming datagram already exists in the
message queue);
- a socket was registered to receive several types of event and
WM_QT_ACTIVATENOTIFIERS message is located between the
different events for this socket in the queue.
Provided patch ensures that the message queue is synchronized with
the Qt event processing mechanism and adds a way to detect spurious
notifications inside the window procedure.
Task-number: QTBUG-58214
Change-Id: I49609dace601f300de09875ff1653617efabd72f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
If the user calls QLocalSocket::setReadBufferSize() with a value less
than the current size of the pipe buffer, startAsyncRead() would call
ReadFileEx() with invalid parameters:
ReadFileEx(handle, nullptr, some_big_value, ...);
Change-Id: I3d153e3ec34f8038dc001c1c896aeceb666a8979
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change the check for the unambiguous match to be case insensitive.
Task-number: QTBUG-60466
Change-Id: Iaa019cc803a56b015f45309fb1b3a7a8a3d82ee4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
I don't know why.
tst_qflags.cpp(114): error: no instance of function template "verifyConstExpr" matches the argument list argument types are: (Qt::MouseButton)
tst_qflags.cpp(91): note: this candidate was rejected because there is a type mismatch after argument substitution
Change-Id: I84e363d735b443cb9beefffd14b9581d77933cb8
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The intersection algorithm for intersection with rects, might return
one edge of the rect even if that edge does not intersect with the path.
To deal with that we collapse paths with empty bounding rects to the empty path.
Task-number: QTBUG-60024
Change-Id: I3e305983c66548e772d7d7ce3de99d715edbdd1b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This reverts commit 96c27f0dfa.
We now use a custom keychain that should fix the original
problem with the test.
Change-Id: I52e4105f34a46ad7080750d9a62480ebe3a56e68
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The fix is outdated - the tests it was fixing - pass on 10.11.
Change-Id: I8b42c1d3d2f1279382b15c20587dcc93cf1b6b40
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Unselecting with offscreen and minimal platforms behave similarly as in
Windows and QNX. If left or right key is used for unselecting, cursor
position is changed.
Change-Id: I022cd2fec80ad1875fec983e1e3536a105e18bb2
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
If QEMU is provided sysroot with QEMU_LD_PREFIX, it opens files from there. If their
owner is the current user, testing their access rights based on assumption that they
are root fails. Skip the tests in that case similarly as is already done when the
tests are run as root.
This fixes following tests:
- tst_QTemporaryDir::nonWritableCurrentDir
- tst_QNetworkReply::getErrors(file-permissions)
- tst_qstandardpaths::testCustomRuntimeDirectory
Task-number: QTBUG-59966
Change-Id: I972ce37b4b5a7747cdd732a8e4a737ef09cbc6a5
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changed testing of focus of modal dialogs to match behavior on offscreen
and minimal platforms.
Change-Id: Ife3ea41b4b78df2e64c8d8e740332914b1e5a67c
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Some features are not implemented by "offscreen" platform. Skip tests
failing because of that. Some failing cases are also already skipped or
blacklisted on "xcb" platform.
Change-Id: I17269169379c270bd7d6f2ddda03ad9b114a71ce
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
We guarded against the Unicode form being invalid and did not produce an
encoded form. But we did not guard against proper Punycode sequences
that decode to forms that had not passed the proper Nameprep stage. So
check for that and, if it fails, just keep the label in the form we
found it in (it's valid STD3 anyway).
[ChangeLog][QtCore][QUrl] Fixed a bug that caused certain domain names
that look like Internationalized Domain Names to become corrupt in
decoded forms of QUrl, notably toString() and toDisplayString().
Task-number: QTBUG-60364
Change-Id: Iadfecb6f28984634979dfffd14b833142cca8d0d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The whitelist is kept in ACE form, so if the TLD came in Unicode, we
need to run ToASCII before we can check the whitelist. This is slightly
inefficient because we'll run the same operation later in this domain.
Change-Id: Iadfecb6f28984634979dfffd14b831f37b0f4818
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Florian Bruhin <qt-project.org@the-compiler.org>
This was simply not working for two reasons:
- The index passed to QMetaObject::metacall was not right (there was an offset
because of the return type)
- If the registration succeeded, the arguments were not even initialized.
The tests in tst_moc always called QMetaMethod::parameterType before calling invoke,
which was properly registering the type. So this was not seen in the tests before.
[ChangeLog][QtCore][QMetaMethod] Fixed crash in invoke() with QueuedConnection and
types whose metatype gets automatically registered.
Task-number: QTBUG-60185
Change-Id: I4247628484214fba0a8acc1813ed8f112f59c888
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It only contained a concatenation of the individual rule sets,
probably to fix their order in a central place, as well as
simplifying iteration in defaultCategoryFilter().
Fix these two issues differently, but introducing a RuleSet
enum that lists rule sets in the order in which they should
be applied by defaultCategoryFilter(), and turn individual
rule sets vectors into a C array of vectors.
This enables two nested loops in defaultCategoryFilter to
replace the one loop over 'rules'. Apart from building up
'rules' in updateRules(), this was the only access to that
member. That leaves updateRules() with just the task of
running defaultCategoryFilter() on the new rule sets.
Consequently, a call to updateRules() can now replace the
identical loop in installFilter().
Performance should not suffer. Iterating over a fixed-size
array of vectors is hardly any slower than iterating over
a single vector, and while the construction of 'rules'
was probably a one-off task in most programs, this way
of keeping the rules also saves memory because rules are
not kept in two different vectors.
It is also more maintainable, of course.
Change-Id: Ibc132d096c8137dd02b034752646212e51208637
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QEMU does not support all syscalls needed for tcp socket testing.
Skipped tests that can't pass on QEMU.
Task-number: QTBUG-59966
Change-Id: Ib6d12d0fc4c913a0222e13db57f0864b7fdf21ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
8a375341cf added swap() to QJson* classes
and marked them shared-not-movable-until-qt6.
This change made QMetaType start reporting that QJson* classes were
movable; however, the test used QTypeInfo and not QTypeInfoQuery to
double check that information.
Port the test to QTypeInfoQuery.
Change-Id: I3227a70a8f24c0013257e180e9cb9cfebe9947f9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since commit bf2160e72c, we can rely on
charNN_t support in all compilers except MSVC 2013, and since that
commit, we use (in 5.10, not 5.9, yet)
!defined(Q_OS_WIN) || defined(Q_COMPILER_UNICODE_STRINGS)
when we only need charNN_t, the type, as opposed to its library
support (u16string, char_traits<char16_t>, ...).
This patch splits the Q_C_UNICODE_STRINGS macro into two, adding
Q_STDLIB_UNICODE_STRINGS for when we need std::uNNstring, leaving
Q_C_UNICODE_STRINGS for when we need just charNN_t support.
In QDebug, when constructing a QChar out of a char16_t, cast to ushort
first, since QChar(char16_t) was only officially introduced in Qt 5.10.
[ChangeLog][Potentially Source-Incompatible Changes] The internal
Q_COMPILER_UNICODE_STRINGS macro is now defined if the compiler
supports charNN_t, even if the standard library does not. To check for
availability of std::uNNstring, use the new Q_STDLIB_UNICODE_STRINGS
macro.
Change-Id: I8f210fd7f1799fe21faf54506475a759b1f76a59
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 47cc9e23a3.
We use QCoreApplication::applicationDirPath in the logging initialization to find
a possible qtlogging.ini file. Because QCoreApplication::applicationDirPath requires
a QCoreApplication instance this leads to a qWarning, which in turn leads to a
recursive call to the logging initialization, and in turn to a recursive mutex deadlock.
Task-number: QTCREATORBUG-18031
Change-Id: Ic75e1e8c062eb647991725378489bf87c9648cca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Commit 288bfb0bbd added a test that uses QLineEditIconButton, which
requires QT_BUILD_INTERNAL to be defined in order for the findChild()
call to work as expected.
Change-Id: Ieda18f4e26a91322e8a83c14f8d1fbbe4313ecf0
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Fixes two separate errors. QImage::transform was incorrectly adding
colors to the color-table of the returned image when the converted image
would not be indexed, and qpnghandler was looking at non-empty color-
table instead of color format.
Task-number: QTBUG-43708
Change-Id: Ife14b6428ca65ac7d3a0b36a89a73e56d64586b4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QLineEditIconButton currently draws a fully transparent pixmap in its
paintEvent() function, when the line edit is empty. This does not work
when there is another trailing QAction that is visible even when the
line edit has no text, as reported in QTBUG-59957.
To fix this issue, make sure the clear button is always the leftmost
button.
Task-number: QTBUG-59957
Change-Id: I8a4f96aae07856aa0e1053ebb338ba9bdf052a16
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Allows categorized logging before QCoreApplication has been created,
which otherwise would silently fail to output anything because the
category would never be enabled, despite QT_LOGGING_RULES being set.
Change-Id: Ia733105c5b6f28e22af511ced5271e45782da12b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Preserve the device pixel ratio in the various helper functions
and when drawing.
Task-number: QTBUG-60026
Change-Id: Ieac9360b00044b6aedd0d3e1ad6e3b16d436f20f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Initialize a deleter for a new object, created by
QSharedPointer::create(), only after the object is actually
constructed.
[ChangeLog][QtCore][QSharedPointer] Fixed undefined behavior when
creating an object with QSharedPointer::create() and its conscructor
throws an exception.
Task-number: QTBUG-49824
Change-Id: I07f77a78ff468d9b45b8ef133278e8cdd96a0647
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When tearing off either a non-scrollable multi-colume menu
or a scrollable menu, displaying the torn-off menu crashes.
The root cause is when the torn-off menu is created, the
tear-off menu's style, margins and other attributes are not
set to it. The patch is to ensure the torn-off menu has
the same attributes as the tear-off menu does and set the
torn-off menu with a correct menu size.
Task-number: QTBUG-24815
Change-Id: Icea45f149ea8792671af4a62e62cad6ee01a1f95
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Currently the contents margins and the menu paddings are not considered
for calculating the menu size, the positions and the size of tear-off
bar, scrollers and the positions of the menu items when scrolling the
menu, which results in the following problems when valid contents
margins and/or menu paddings are set:
- The tear off area is displayed in a wrong position. The mouse events
are not handled correctly in the tear off area. For example, when you
click in the tear off area, the menu should be torn off but nothing
happens
- For a multi-column menu, the menu width is not calculated correctly
- For a scrollable menu,
- the menu width is not calculated correctly
- the menu items are not displayed in correct positions
- the scrollers are not displayed in correct positions
- menu items are displayed on the area of borders and margins when
scrolling the menu
- the last menu item is not displayed above the bottom of the content
area when scrolling the menu to the end.
The changes are to fix the problems above.
Change-Id: I7931e1088dff0029f2d4825e2aa34b4e32fdccd9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Seems like an obvious omission.
[ChangeLog][QtCore][QVariant] Can now convert QUuid to and from
QByteArray, not just QString.
Change-Id: Ib56ae86ca0c27adaf1e095b6b85e64fe64ea8d18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When multiplying a QMatrix4x4 by itself, we were clobbering the very
matrix we read from. Employ read-caching to avoid this aliasing problem.
[ChangeLog][QtGui][QMatrix4x4] operator*=() now calculates the correct
result even if the RHS and LHS are the same object.
Change-Id: I8534d56cfdd62c336577125127f05173fcec2873
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
On non-windows platforms, we use the "-p" parameter of install(1) to
preserve the last modification timestamps of files. On Windows the use
of copy does not preserve them. As a cross-platform solution, this patch
introduces a simple built-in install command in qmake to copy files.
Task-number: QTBUG-59004
Change-Id: I3064d29a2b8c7b009a1efbf8f00b84c079ea5417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On 32-bit arm platform, qint64 gets aligned differently than on 32-bit
x86. First difference between the platforms on QFilePrivate member
offset happens in QFileDevicePrivate::cachedSize:
- On 32-bit x86 it's offset is 148 (4-aligned)
- On 32-bit arm it's offset is 152 (8-aligned) and offsets of all the
remaining members are +4 compared to x86
- On 64-bit architectures the offsets are the same
Change-Id: If110da27ea08504e78b167c0a21599420eaa9630
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSysInfo::productType() returned "osx" for all versions of macOS, even
10.12. Change 3e2bde3578 was incorrect.
[ChangeLog][Important Behavior Changes] QSysInfo::productType() and
QFileSelector behavior on macOS was restored to match what Qt used to
return in version 5.7.0 and earlier. The behavior found in Qt 5.6.2,
5.7.1 and 5.8.0 is removed.
[ChangeLog][Future Compatibility Notice] The identifiers that
QSysInfo::productType() and QFileSelector will use to identify macOS
systems will change in Qt 6.0 to match the Apple naming guidelines which
will be current then.
Task-number: QTBUG-59849
Change-Id: Ib0e40a7a3ebc44329f23fffd14b2b39392210c4f
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
<div>1<br/></div>2 was inserting two newlines between 1 and 2, while all
tested web browsers only insert one newline - as long as there is nothing
between the <br/> and the </div>.
This was the cause for extra newlines being inserted in KMail when
replying to HTML emails, such as those generated by gmail.
Change-Id: I5145d977701e68913264357bba22780e7cdd3f7d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Now set the QImage devicePixelRatio so the content is correct on all
screens.
Task-number: QTBUG-53795
Change-Id: Ic92eee98f691ebb1e0212498c1ae13ede74bca93
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
It is incorrect to collapse a "symlink/.." segment because the parent
directory of the symlink's target may not be the directory where the
symlink itself is located.
[ChangeLog][QtCore][QDir] Fixed a bug that caused QDir::mkpath() to
create the wrong directory if the requested path contained a symbolic
link and "../".
Change-Id: Iaddbecfbba5441c8b2e4fffd14a3e367730a1e24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
std::nullptr_t is nullary: it accepts only one value, nullptr. So we
don't need to read or write anything. This commit simply adds the two
operators that allow generic code to operate on std::nullptr_t if
required.
This commit also adds the actual use to QMetaType::load/save, even
though there's no change in behavior.
[ChangeLog][QtCore][QDataStream] Added operator<< and operator>>
overloads that take std::nullptr_t, to facilitate generic code.
Change-Id: Iae839f6a131a4f0784bffffd14aa37e7f62d2740
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Backtrace logging tests were not passing for arm. Added compile option
-funwind-tables to support backtrace on arm.
Task-number: QTBUG-59966
Change-Id: I5e2443b1e3a644a239dab68db990e75ae8fade24
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Widgets in platforms offscreen and minimal don't get focus back
automatically after hiding focused window. Extra activateWindow
is needed.
Task-number: QTBUG-59966
Change-Id: Iaf3d4e60483c4b2600472af199f7a7cd51b3fa6e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- Alignment test was not compiling or passing on GCC / arm
- Using C++11 alignas() enforces maximum limit for the alignment, which
at least on GCC / arm is __BIGGEST_ALIGNMENT__ multiplied by 8
- On GCC 6.2.0 / x86_84, maximum alignment accepted by alignas is 128
- On GCC 5.3.0 / arm, maximum alignment accepted by alignas is 64
- This change calculates biggest tested alignment on ARM targets
and compilers supporting alignas() to the value calculated
from __BIGGEST_ALIGNMENT__
Task-number: QTBUG-55492
Change-Id: If2b70000ff9cdc5ae8c5a00e39f79efcc6ba1221
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTBUG-43818 does not affect only Android, it can be reproduced also
with qemu.
Change-Id: I6364c09b3c7f860b34899e26056ad562b7c338f2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Qemu does not report /proc/self/maps size correctly. Added expected
failure for it
Change-Id: I4019884702b8f9a33717b02e79c9e0c042b2449f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Function if_indextoname fails on qemu because SIOCGIFNAME is not
supported. Expect failure if emulation is detected.
Change-Id: I53b41286d82458661e7fa723af385f323582ce7e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If we do not the fontDef of the multifont will be the default 0.
Task-number: QTBUG-59443
Change-Id: Ib223517975b2a57b2371e309d12cd8f918d30825
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QOpenGLWidget is not supported on all platforms. Skip tests on those.
Change-Id: I0f9500553427903f20d248acaa20803276e3ab00
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The SHA3 family is a modified version of Keccak. We were
incorrectly calculating Keccak (and even *testing* Keccak!),
but claiming it was SHA3.
To actually calculate SHA3, we need invoke Keccak on the original
message followed by the two bits sequence 0b01, cf. §6.1 [1].
[1] http://dx.doi.org/10.6028/NIST.FIPS.202
[ChangeLog][QtCore][QCryptographicHash] QCryptographicHash now
properly calculates SHA3 message digests. Before, when asked
to calculate a SHA3 digest, it calculated a Keccak digest instead.
Task-number: QTBUG-59770
Change-Id: Iae694d1a1668aa676922e3e00a292cddc30d3e0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two changes are needed to pass tst_Selftest on QEMU
1. Pass QEMU specific env variables to the subtests
2. Ignore output on stderr on some tests when running on QEMU
Change-Id: Ie1f722fd183aac5973e87d408005e06cbafcde17
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Unix mmap(2) system calls do allow for mapping beyond the end of the
file, though what happens after you try to dereference the pointers it
gives is unspecified. POSIX[1] says that implementations shouldn't allow
it:
The system shall always zero-fill any partial page at the end of an
object. Further, the system shall never write out any modified portions
of the last page of an object which are beyond its end. References
within the address range starting at pa and continuing for len bytes to
whole pages following the end of an object shall result in delivery of
a SIGBUS signal.
However, Linux allows this in read-write mode and extends the file
(depending on the filesystem).
Windows MapViewOfFile never allows mapping beyond the end.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/mmap.html
Change-Id: Ie67d35dff21147e99ad9fffd14acc8d9a1a0c38d
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QWidget::updateWhileMinimized has been failing on Ubuntu 14.04
and was already blacklisted there. Now we extend it to cover Ubuntu
16.04.
Task-number: QTBUG-46116
Change-Id: I6758657cca46bb4c76cddb0298f9b87b8a43655b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Mixing different protocols on client-server sockets works differently
on 10.11, making previously successful handshakes failing now.
Failure is specific to 10.11 with SecureTransport.
Change-Id: I35374b40fa3d167802775b526cf6465ae78749cf
Task-number: QTBUG-48860
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
GCC bug 68949 causes tst_QGraphicsGridLayout and tst_QGraphicsLinearLayout
to fail on 5.2.x/5.3.x: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68949.
This change adds aggregate initialization to QSizeF arrays to work around
the bug. The bug was discovered when compiling and running tests on ARM
with GCC 5.3.0.
Change-Id: I9ecf7b032b6ca1477c29dca3bd7d0ec8d69a0454
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QEMU does not support all syscalls needed for udp socket testing.
Skipped tests that can't pass on QEMU.
Change-Id: I40882207a47cfafbc3becb3dff8e7cead9676255
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously we were always setting SpdyWasUsedAttribute for SPDY/HTTP/2/HTTP/1.1
(true/false) which is confusing. Now if HTTP2AllowedAttribute was set to true on
a request, we set HTTP2WasUsedAttribute. Otherwise, as we did before, we're setting
SpdyWasUsedAttribute.
Change-Id: I0c44cfb5469fef0c12719baa951197ee2accee4a
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Make it possible to blacklist the (newly created)
quitOnLastWindowClosedMulti() if all else fails.
Task-number: QTBUG-59088
Change-Id: I8c143a2017e7aefaf6cad6ada9c1464d40c952e7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Only test for xcb specific sub-features if xcb is available in
the first place - not the case with Boot2Qt builds.
Change-Id: Iad49648ce1c8781d0c7bb2b2dcd4b7834434d51d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Instead of the never-ending blacklisting of "broken" drivers, simply switch
to always choosing a byte ordered QImage format with OpenGL ES, and keep
on using the (one and only) spec-mandated GL_RGBA/GL_UNSIGNED_BYTE combo.
There is nothing broken with not supporting BGRA for glReadPixels even when
GL_EXT_read_format_bgra (an out of date, pre-2.0 extension that got folded
into the spec to begin with) is present. We do not have a good way to tell
if BGRA_EXT is supported for glReadPixels or not, so just skip the whole
problem altogether.
Task-number: QTBUG-59283
Task-number: QTBUG-59303
Change-Id: I9f0605380923bd3b3ffdeb80f5c172d3e4cc7927
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
- Test tst_LargeFile::mapFile fails on Qemu for files over 4Gb.
Fixed by limiting maxSizeBits to 28 (must be n*4 and < 32).
- Bug QTBUG-21175 is also effective on ARM targets. Fixed by
expecting failure also on ARM.
Change-Id: I9103727e618a17259b4785ec8c284f3bb60ebea7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Ensures that numbers representable as 64-bit integer
are not printed using exponent notation.
Some JSON implementations such as the one of the Go
standard library expect this in the default
conversion to int.
Change-Id: Ic3ac718b7fd36462b4fcabbfb100a528a87798c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix the condition in QWidgetPrivate::resolveLocale() to decide whether
to propagate locale: make it match setLocale_helper()'s condition when
deciding whether to propagate to descendants. This lead to a
QDateTimeEdit's calendar popup not getting told what locale to use
correctly, unless we setLocale() on it overtly, which then blocked
propagation of locale changes to it unless QDateTimeEdit manually
propagated the changes.
Fix the documentation of WA_WindowPropagation to mention locale as
also being propagated (which it was in several places, only neglecting
this one in resolveLocale).
[ChangeLog][QWidget][Qt::WA_WindowPropagation] Propagate locale
consistently, along with font and palette, within the widget
hierarchy. Previously, locale was propagated on ancestral
setLocale(), but not on creation of the descendant.
Task-number: QTBUG-59106
Change-Id: I92270f7789c8eda66a458274a658c84c7b0df754
Reviewed-by: David Faure <david.faure@kdab.com>
RFC6125 section 6.4.2 specify we need to convert the IDN to ascii
before comparison. Note that we don't need to toLower anymore
because toAce takes care of it.
Section 7.2 recommands that we dod not attempt to check for wildcard
character embedded within the A-labels or U-labels of an
internationalized domain name. So we reject names that contiains a
'*' but starts with 'xn--'.
Change-Id: Ib0830520a1f82bbf9fd11818718277a479527ee3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test has been observed to be flaky, printing warnings
"Rubber band has different geometry". Output the geometries.
Task-number: QTBUG-59641
Change-Id: I6c209f2a98a07655e8523c012c5562d602d217ad
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
If the respective modules aren't available we cannot build the tests
and examples. We drop the qtConfig(opengl) requirement for the opengl
examples as
a, we would need to make the QtGui configuration available for that to
work, and
b, we should not add too much detail to the tests and examples build
configurations. Checking each test and example for every feature it
uses would be too much.
Task-number: QTBUG-57255
Change-Id: Ifb043c81ec9e5c487765297bd65704812cd281fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
CustomTextWidgetIface marked its text() method as an override;
DropOnOddRows marked its canDropMimeData() as an override; each
neglected some other methods that are overrides. Convert
Q_DECL_OVERRIDE to the keyword in affected classes, to match.
Change-Id: I78b38e20a81e3e6aab282a1cb3d70cdf8a5f4135
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
mkdir(data2) depended on mkdir(data1) being run before, or it would
fail. In addition, the rmdir() test required the equivalent mkdir() test
being run before. So drop these annoying dependencies and make the tests
cleaner by having clear separation of the test data and merging the two
tests into one
The entryList() test still depends on the testdir being clean: it will
fail if mkdirRmdir() previously failed.
Change-Id: Iaddbecfbba5441c8b2e4fffd14a3e35972d2a3d8
Reviewed-by: David Faure <david.faure@kdab.com>
We don't load and save pointers usually because the pointer value cannot
be guaranteed to remain across program invocations. However, nullptr is
an exception: a null pointer is always a null pointer.
We don't actually have to read or write anything: there's only one value
possible for a std::nullptr_t and it is nullptr.
[ChangeLog][Important Behavior Changes] A QVariant containing a
std::nullptr_t is now streamable to/from QDataStream.
Task-number: QTBUG-59391
Change-Id: Iae839f6a131a4f0784bffffd14aa374f6475d283
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Task-number: QTBUG-59218
Change-Id: Ic839a36af1ecab39da0c3394c34181b6717e24e2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QUrl::isRelative(str) would be false for such files, so first check for
file existence before doing any URL parsing.
Change-Id: I51b6229251ad94877ac408b2f8018456d3e10a36
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a text block is empty, and we are adding preedit text to it,
we need to merge the format of the preedit text with the current
format of the cursor, otherwise we will use a default format and
then suddenly switch to the proper one when the text is committed.
The reason this becomes a bit complex is that there are no rules
preventing someone from using several ime attributes to specify
formats for isolated parts of the text, and no rules defining the
order of such attributes. So even if the common case is one
text format attribute for the entire string, we need to make sure
we also handle the other cases gracefully, e.g. when we are setting
different formats for different substrings and then providing these
out of order. To make sure we have these corner cases covered, we
also add a set of autotests.
[ChangeLog][Qt Widgets][TextEdit] Fixed initial char format of
input method text as it is in pre-edit mode.
Task-number: QTBUG-59196
Change-Id: I1e37928e3bd1395fec1b5591908d4c69b84eb618
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Commit e0ea0f6178 optimized QChar <->
QString(Ref) comparisons by adding more overloads to avoid creating
QStrings from QChars just to compare them.
But these new overloads made existing comparisons to QChar ambiguous.
This was known at the time for QChar/int comparisons.
It has since turned out that also comparing to '\0' is ambiguous,
ie. not comparing to int or char per se is ambiguous, but comparing to
nullptr constants is, because QString(const char*) is just as good a
candidate as QChar(char)/QChar(int).
Since we allow QString/QChar comparisons, it seems logical to solve
the problem by adding QChar<->nullptr overloads.
[ChangeLog][QtCore][QChar] Disambiguated comparisons with nullptr
constants such as '\0', which 5.8.0 broke. As a consequence,
QChar<->int comparisons are no longer deprecated, as this was a failed
attempt at fixing the ambiguity.
Change-Id: I680dd509c2286e96894e13078899dbe3b2dd83bc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has started failing recently on the CI, too.
Task-number: QTBUG-58745
Change-Id: I4c8834917e6455d00c300549ed448b06da75d5bc
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
in the vain hope to get the CI unstuck again.
Change-Id: I1b01bb1d59a8850f68d1d80838f5606f4159bcbd
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Fixes the bug in QFile which allowed opening a file with reserved
characters in its name. If the name is a long file path, CreateFile
opens a file with a truncated name instead of failing, so we have
to catch reserved characters ourselves.
[ChangeLog][Windows] Fixed a bug that caused QFile to create
files with truncated names if the file name was invalid. Now,
QFile::open correctly fails to create such files.
Task-number: QTBUG-57023
Change-Id: I01d5a7132054cecdfa839d0b8de06460039248a3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
No test were hitting the code path for tiled non-ARGB32PM bilinear
filtered scaling. In part because we were only using brushes in pixmap
mode which are always converted to RGB32 or ARGB32PM.
Change-Id: Ib466567f31ce6ee894acdf484d44b3af62dad6fc
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Closing the dialog at the end of the test ends the modal session via
QCocoaEventDispatcherPrivate::endModalSession(), but the actual ending
of the session is deferred to cleanupModalSessions(), and that is never called.
The result is that QCocoaWindow::setVisible of the window in testKeyPressOnToplevel
and following tests ends up calling [m_nsWindow orderFront:nil]; instead of
[m_nsWindow makeKeyAndOrderFront:nil];, leaving the window inactive and the
tests failing.
Task-number: QTBUG-58474
Change-Id: If66b2e201f658b627c2ec50a562938f59a5037ed
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Made change to clear the hover index when the mouse leaves the widget.
This will ensure the component does not think the item still has the
mouse over it.
Task-number: QTBUG-46785
Change-Id: I34b7f0e171e9cf07ca23150af1b0e6e59a10a58a
Reviewed-by: David Faure <david.faure@kdab.com>
By adding std::move where it makes sense.
This is not only good for move-only types, but for any type which
can be moved as it saves copies of the return value in any case.
[ChangeLog][moc] Move-only types are now supported as return types
of signals and slots.
Change-Id: Idc9453af993e7574a6bddd4a87210eddd3da48a9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Even if it is normaly not used, templated code might still try to access it
Task-number: QTBUG-59414
Change-Id: I9f7aadd714843059c8f89cdac48c60a3e2ca7294
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's a Qt 3 compatibility vehicle, and as such inherits the now-alien
property to distinguish empty and null strings. Particularly worrisome
is the following asymmetry:
QString("") == QString::null // false
QString("") == QString(QString::null) // true
Instead of fixing this behavior, recognize that people might use it as
a weird way to call isNull(), albeit one that once was idiomatic, and
simply deprecate everything that deals with QString::null.
[ChangeLog][QtCore][QString] QString::null is now deprecated. When
used to construct a QString, use QString() instead. When used to
compare to a QString, replace with QString::isNull().
Change-Id: I9f7e84a92522c75666da15f49324c500ae93af42
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Stale Lock files in the future can happen in some situations. For exemple
two computers with different clocks access the same file system. It could
be that one of the timestamp is totaly off (several years into the future).
[ChangeLog][QtCore][QLockFile] Fixed a deadlock occurring if a corrupted
lock file's modification time is in the future.
Change-Id: I8dac98a0e898c76bcef67f8c195e126c996b6add
Reviewed-by: David Faure <david.faure@kdab.com>
Commit fb376e0fcc removed an array that
facilitated returning the names of built-in types, to avoid the jump tables
from the switch statement. This commit brings it back but makes the array a
compile-time constant string offset table.
The array is created by way of a set of C++11 constexpr functions, so we
require that compiler feature. I've tested that MSVC 2015 does support
it as well as the ICC 17 when masquerading as MSVC 2015, so I've enabled
for that too. The only compiler left out is MSVC 2013.
If we didn't need to support MSVC 2015, this could have been written
more simply with C++14 relaxed constexpr.
This also adds unit tests to confirm that QMetaType::typeName() does
return null when we said it would. We're testing QMetaType::User-1
(which we'll likely never use) and QMetaType::LastWidgetsType-1 to
select something inside the range of the built-in types.
Task-number: QTBUG-58851
Change-Id: I4139d5f93dcb4b429ae9fffd14a33982891e2ac1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
[ChangeLog][moc] Added Support for C++17 nested namespaces
Change-Id: Ib83fc5bf48f66546fa97b49710582fbf9c984503
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Let's take the beginning of the description: WaitForSingleObjectEx can
be up to 16 milliseconds early. This is proven by the fact that there
are tests doing:
wait(waitTime);
QVERIFY(timer.elapsed() >= waitTime - systemTimersResolution);
and failing.
Task-number: QTBUG-59337
Change-Id: Iae839f6a131a4f0784bffffd14a9a79523d69d94
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When the insertion into the cache fails then it will delete the entry
for us which already calls releaseKey(). So we should not call it a
second time.
Task-number: QTBUG-58259
Change-Id: I816c6f29ef97fe3a245f145c4faf1e0649f72dc5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
ResultStore never actually exists, only ResutStoreBase does. So casting to
ResultStore<T> and calling its member functions is UB. Put the type dependent
function as template member functions within ResultStoreBase and so we don't
need QtPrivate::ResultStore anymore.
Same goes for the iterator.
Change-Id: I739b9d234ba2238977863df77fde3a4471a9abd2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We should not check for platforms, but rather for features. Also, if
dbus is available it doesn't automatically mean that QProcess is.
Change-Id: I27ef5863fcb107cca1aa47abba95b734962adc33
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For the windows file system engine, we add an extra macro to use
library loading if configured to do so, but avoid it on WinRT, as
none of the symbols would be found.
We also QT_REQUIRE_CONFIG(library) in the library headers and
exclude the sources from the build if library loading is disabled.
This, in turn, makes it necessary to clean up some header inclusions.
Change-Id: I2b152cb5b47a2658996b6f4702b038536a5704ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Parameters passed by value, like local function variables, are subject
to NRVO/return-by-move already, so adding std::move, even disguised as
qMove(), makes Clang warn about a pessimizing move.
Change-Id: I7d59bfee4cf7ecddee0874ee489367044c702643
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QLocale::matchingLocales() simply created each locale using the basic
data, without (unless the matching conditions stipulated Language C)
applying number-options hacks that it applies everywhere else, when
creating the C locale. Thus the C locale in its returned list (if it
wasn't the only entry) ended up with the default number options,
without omiting separators in numbers. Thus QLocale::c() didn't
actually appear as an entry in the list. Discovered while
investigating QTBUG-58947.
Added a dumb autotest that checks various ways of getting the C locale
do actually give us equal locale objects. Fixed matchingLocales() to
apply the same hack as is used elsewhere for the C locale.
Change-Id: I263f31da623052b63171f5b5a83c65802383df21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On a multi-display system wide submenu might either appear on wrong
screen or not appear at all (depending on the specific display
configuration).
Task-number: QTBUG-56917
Change-Id: I40013b0bee340a01ae1c08a5e074afa63da4dbfd
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
This patch fixes 2 issues related to wide menus:
1) Menu took on full screen height when menu width was larger than
screen width;
2) On a multi-display system wide menu might appear on wrong monitor
(not the one where show event was triggered).
The idea is we limit parent menu and all its submenus within the screen
where it was opened.
Note that this patch fixes only geometry-related issues and there are
also some style flaws which need to be addressed (for example, currently
the text does not elide if it doesn’t fit to the menu’s width).
Task-number: QTBUG-56917
Change-Id: I7e9ff4a48bf03060d76e34d33a13ad6cc890c133
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Commit eab7efd1 increased the timeout for this test, but apparently 10
seconds are still not enough. Set the timeout to a minute.
Task-number: QTBUG-59075
Change-Id: Iebab8e5c73c4858ca90063a82aedfbb2546a62cc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This reverts commit a4c25c0205.
The API is too limited in scope, and a good name is hard to find, as
evidenced in the API review discussion preceding Qt 5.9 beta.
This API will hopefully return as something like setItemAlignment().
[ChangeLog][QtWidgets][QListView] EDIT: REMOVE: Added expandingListItems property.
Conflicts:
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: I397acd8a7a6c716e2d3c96eee45a276eb6d4f9dd
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
If a floating QWidget has a parent on a different screen, its DPI was
still inherited from the parent instead of taken from the screen.
The only reason we did was in case there is a customDpi set.
(customDpi is a private thing that is only used in designer to change
the appearance of the previewed widget)
So instead of recursing into QWidget::metric for each ancestor, just
use a for loop to find if one parent has a customDpi. If no customDpi
is found, then return the DPI of the right screen.
Task-number: QTBUG-58959
Task-number: QTBUG-48242
Change-Id: Ie6e9e48cdd10234994c0919ba3aea9b0cdb52494
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
As the destroyed() signal is emitted from ~QObject, it is not allowed
to use static_cast to a QAbstractButton on that pointer anymore.
And the qobject_cast will also fail which will keep a dangling pointer
in the hash.
Change-Id: If0d22fcc30cde87e771e70914c3afb04ea207289
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The color values of ppm and pgm images can be either 8 or 16 bits.
They can also be scaled to a smaller max value, and they can be
expressed either binary or ascii. For some of these permutations, Qt's
image handler lacked implementation or would decode the wrong color
value. This commit fixes that.
Task-number: QTBUG-18262
Task-number: QTBUG-35990
Change-Id: I7cf11c2366244f3a9b31c1a565a81e2658bc6a51
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
C0 to DF take one continuation byte; E0 to EF take two.
It's invalid UTF-8 anyway, but at least this is what the test row meant:
overlong sequence with 3 bytes of what should have been two.
This updates the comment to match the character that we were actually
testing.
Change-Id: I85a8bd6da2c44f52b4e3fffd14a75df2600487aa
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace outdated LGPL21 with LGPL license header.
Use GPL-EXCEPT for all autotests.
Also use canonical contact url.
Change-Id: I6e5cc8a4285569c4f862730a980f492b8a933a72
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
After commit d207738245 we unconditionally
write version two, but it seems useful to allow users to specify the
version explicitly.
Change-Id: I81d3de3d7f87318653f89bf10e3618becd8329d6
Task-number: QTBUG-58769
Reviewed-by: hjk <hjk@qt.io>
The implementation now uses the relaxed-constexpr
qCountTrailingZeroBits() function from QtAlgorithms, making the
QSizePolicy(Policy, Policy, ControlType) constructor constexpr on
C++14 compilers. The explicit check for DefaultType remains to keep
the constructor C++11-constexpr when called with just (Policy,
Policy).
Extend the constExpr tests a bit.
Change-Id: I59690f0921d9bdee08e3615d0d1f4a9b92870c32
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Embeddeding a QWindow via QWidget::createWindowContainer() fails to
deliver the SurfaceAboutToBeDestroyed event. This breaks any OpenGL
or Vulkan based QWindow that releases resources upon this event, and
is particularly critical with Vulkan where the only way to do properly
ordered swapchain - surface cleanup is via this event.
In the non-embedded case close() eventually ends up in an explicit
destroy() in QWindow. In the embedded case destroy() only gets called
from ~QWindow. This then silently breaks since the subclass' reimplemented
event() virtual is not getting called anymore.
To remedy the problem, simply add an explicit destroy() to
QWindowContainer.
Task-number: QTBUG-55166
Change-Id: I1671e8f4d39f6c44e19eca7b9387f55fe3788294
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Unlike setTimeSpec, this forgot to clear the bit when detaching. So it's
possible that some further use of the flags could incorrectly conclude
that the data was short and then proceed to corrupt the pointer.
The example from QTBUG-59061 caused this because toUTC() -> toTimeSpec()
calls setMSecsSinceEpoch which left the bit set; then addDays() calls
setDateTime(), which calls checkValidDateTime() and that corrupted the
pointer. This problem was more visible on 32-bit systems because no
QDateTime was short (except for default constructed ones), but it
can happen on 64-bit with sufficiently large dates.
Task-number: QTBUG-59061
Change-Id: Ibc5c715fda334a75bd2efffd14a562a375a4e69b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The call to trimmed() makes sense for URLs typed in a browser's location bar,
but its use in every code path made it impossible to open a file with a trailing
space in command-line tools that uses fromUserInput(cwd) to handle command-line
arguments, as recommended. For instance kde-open5 "file.txt " would fail.
Change-Id: Ie61182684521d91f077d3e76f95b7240965ab405
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows to test specific filenames without polluting the current dir.
Change-Id: Ieb99019a2e37e30f294d85c5d80af1de1b919019
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
operator=, which was only used for clearing, wasn't clearing the hash.
This led to a mismatch between the vector and the hash (given that the hash
points into the vector).
Spotted by interrupting kmail in gdb, and it was in this code
iterating over a 2000 entries hash (the first vector entries not matching
the hash, this code keep appending new entries for the same formats).
This fixes QTBUG-8862 again, the initial fix having been accidentally
reverted in 467b15a.
Change-Id: Ia34b3d002a0199e1930431a4bbdb2ec981ed4ffc
Task-number: QTBUG-8862
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Ensure that tablet moves are delivered iff tabletTracking is true.
Task-number: QTBUG-26116
Change-Id: Iaa360e181f0c6484cfbde6fa5365f2f0dc77433a
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
It's only used in the autotests, and it private API, so
downgrade from Q_CORE_EXPORT to Q_AUTOTEST_EXPORT.
Fix a use of QTimeZonePrivate functions unprotected by
QT_BUILD_INTERNAL in tst_qtimezone.cpp.
Change-Id: I70eaea06f8fcf2983aeafb6894c3a5d2a4b272a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unfortunately, that ctor also takes a ControlType argument (defaulted),
and calls the non-constexpr, non-inline function setControlType().
In order to make at least the two-arg version constexpr, I added
a use of the ternary operator to check for type == DefaultType,
making all calls of the ctor that use type == DefaultType
constexpr. For init'ing an aggregate type without ctor in the
ctor-init-list, I needed to require uniform initialization, too.
C++11-style constexpr cannot call void functions, so I needed
to extract the transformation part of setControlType() into a
new function that returns the result instead of storing it directly.
Saves a surprising 2K in QtWidgets text size on GCC 4.9, AMD64 Linux
stripped release builds.
Change-Id: Ib4adf5fd6e54d5345dbfe1c298554278faf13c58
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The cancel() function added in 5b11e43e for Qt 5.5 suffers from a
number of problems:
First, if runnable->autoDelete() is true, then the function suffers
from the ABA problem (see documentation written for trytake()).
Second, if runnable->autoDelete() is false, due to cancel() throwing
away crucial information instead of returning it, the caller cannot
know whether the runnable was canceled (and thus has to be deleted),
wasn't found or is currently executing (and thus mustn't be deleted),
or has finished executing (and can be used to extract the result).
Deprecate this dangerous API and replace it with the much more useful
Private::stealRunnable(), promoted to public API and renamed to
tryTake() for consistency with the rest of Qt.
Described the various caveats in the function's documentation.
[ChangeLog][QtCore][QThreadPool] The cancel() function suffers from
several subtle issues and has been replaced with a new tryTake()
function.
Change-Id: I93125935614087efa24b3e3969dd6718aeabaa4f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We define QT_STATICPLUGIN for the plugins in this case, so that they
define the factory functions needed to link them directly into the
test.
Change-Id: I0f2de7bf6bec5a6d53ec9ad92536817c1221b7d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We fully specialize QTypeInfo for most C++ built-in types,
but enums and extended integral types (like GCC's int128_t)
were not covered.
Now that we depend on <type_traits>, we can stop pessimizing
enums and extended integral types in QVector and QVLA by
defaulting QTypeInfo::isComplex to true for such types.
Fix a test that checked that enums were complex types. This should
have been a XFAIL test. Enums are not complex types.
Change-Id: Ibb0fb38cc83e980a428b5573d1db5666593418ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
don't attempt to hand-craft a library export any more. instead, use the
configure system's built-in mechanism, and refer to it via QMAKE_USE.
this also allows us to rely on transitive dependencies in the autotest.
as a side effect, this makes the openssl-linked feature imply the
openssl one.
Change-Id: I5dd209b63bc8fbbc62852f6ffc472d4452ea2e68
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Some format and parse tests for time and date-time depended on locale
but had test data for the C locale (so fail if the test-environment
has, e.g., LANG=de_DE@utf8). So impose the C locale (until Qt 6).
The date-time test did *some* attempts at fixing for locale, but
failed to handle am/pm; and we do have "### Qt 6" comments in
Q(Date|Time)+::fromString indicating that we intend to switch these
methods to use the C locale by default (which shall fix this once and
for all). So rip out the incomplete localization now and test we work
properly at least when the locale used *is* C. Add a comment to the
matching QDate test to rip out its (presently adequate) matching code
once we do get to Qt 6 and make fromString() use the C locale.
QDateTimeParser uses systemLocale(), which is initialized the first
time it gets accessed; so we need to frob the locale *early*; doing so
in the test-class constructor is about as early as we conveniently
can; and seems to work (while doing it in individual tests does not).
(There is no point rolling back at the end; the QSystemLocale global
has been set up by then, so the roll-back would merely leave the
global out of sync with setlocale() and the environment.)
Task-number: QTBUG-58728
Change-Id: Ifa6778a80276050a099387a6dab15a1096be7561
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
AİİA.pdf takes 8 QChars, but after lowercasing it takes 10, so the code cannot
assume the length to be the same.
Task-number: QTBUG-58822
Change-Id: Id6fbb99f6afd08ee420099cd66372732d7598d9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLineEdit, QAbstractSpinBox and QComboBox did not notify micro focus
changes to the input context.
In particular, the updates were missed during pre-edit stage.
This change adds the missing bindings to QWidget::updateMicroFocus().
Change-Id: I9a7fff962f46dbabd8fb02836c206bace115793b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
see 5a1b4832a2 for more detail
Task-number: QTBUG-58142
Change-Id: I51851ea9b4fe7b8eeadc452bc3dbb1ea00026d29
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Like the lvalue QVector::append() overload, when we reallocate,
we need to take a copy of the function's argument because the
reference will get stale upon reallocation.
Add a test.
[ChangeLog][QtCore][QVarLengthArray] Fixed a bug involving
appending an item already in the container to the container
again.
Change-Id: I06eeed6cb383dd5924e47a302bb3d1666d04c8e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Automount filesystems like /home on many operating systems (QNX and
OpenIndiana, at least) don't like if you try to mkdir in them, even if
the file path already exists. OpenIndiana even gives you an ENOSYS
error.
So instead, let's try to mkdir our target, if we fail because of ENOENT,
we try to create the parent, then try again.
Task-number: QTBUG-58390
Change-Id: Ibe5b1b60c6ea47e19612fffd149cce81589b0acd
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Systematic testing in tst_QStringApiSymmetry revealed a bug in
QStringRef::toLatin1(): a null input did not result in a null output,
but an empty one. This is fixed, for consistency with
QString::toLatin1(), and QString(Ref)::toUtf8(), which behaved
correctly already.
The same bug was found in QString(Ref)::toLocal8Bit(), which is
particularly hideous, as it's documented to fall back to toLatin1(),
which preserves null inputs. Fixed, too.
[ChangeLog][QtCore][QString] toLocal8Bit() now preserves nullness of
the input QString (outputs null QByteArray).
[ChangeLog][QtCore][QStringRef] toLocal8Bit() and toLatin1() now
preserve nullness of the input QStringRef (output null QByteArrays).
Change-Id: I7026211922c287e03d07e89edbad2987aa646e51
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
After it started to fail (somehow it's only OpenSUSE 42.1) again and again
and after a quick re-evaluation it appears the logic testing SETTINGS|ACK
is incorrect. We (client side) start by sending the preface and then
continue to send our request(s). The other side (server) starts from sending its
SETTINGS frame. These settings must be ACKed, but apparently it can happen,
that server receives a requests and sends a reply before it receives SETTINGS|ACK,
resulting in replyFinished (replyFinishedWithError) signal and event loop stopping.
As a result - QVERIFY(serverGotSettingsACK) fails.
Task-number: QTBUG-58758
Change-Id: I8184cf459b2b88f70c646171e0115c184237fad1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_QDateTime::operator_insert_extract() was setting the time-zone and
taking care to restore it at the end of the test; however, if the test
were to fail, the restore would be skipped. Package the zone-setting
and restore in a class instance, so that premature return can't bypass
the restore.
Change-Id: I3df63260da17e481ef4d0d107d9f0fdea3e147e7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We keep the runnables from finishing by having them block
on a QSemaphore::acquire() call inside run().
If we fail a test that precedes the call to sem.release()
further into the test, the early return will cause the
thread pool to be destroyed, which will then attempt to
wait for the runnables to finished, which, in turn wait
for the semaphore to be released.
-> dead lock
Fix by introducing a RAII object to release the semaphore
with a sufficiently large number to unblock all runnables.
That number will in some situations be too large, but that
does not matter.
Change-Id: I1ec7e29b37bc36309e93e6e30708cc7db3c9579c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to get reproducible runs of the test, we need to
wait in the main thread until all runnables have started
executing. Otherwise, what the cancel() loop below actually
does will vary from run to run.
Change-Id: Ib912b0943e7bbd55c9480ae6fd4011ba20ac457e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of allocating a statically-sized array on the heap,
use an automatic C array instead.
Replace some magic numbers with named constants.
Change-Id: I17d29a76a67c4a413453ac26a5dee8cd54a8a37d
Reviewed-by: David Faure <david.faure@kdab.com>
Manipulating a simple int from multiple threads is a data race,
thus undefined behavior.
Fix by using QAtomicInt and atomic operations instead.
Change-Id: I5418bc260da57fe353a71b8e5c7c1c97adbe7597
Reviewed-by: David Faure <david.faure@kdab.com>
This should reduce the failure rate. We're still doing qSleep of the
same amount of time, but we now only fail if the slip is over 100 ms.
Task-number: QTBUG-58713
Change-Id: I536c32a88bff44dab37afffd14a1afdf0b2e522a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
currencySymbol == "$" does not mean negative currency values will be formatted
as "($value)". With all locales I have on my mac machines (10.11/10.12) the
result is different from what this test expects. Also, the results are very
different for different locales. Apparently, we never saw this problem before
since in our CI "macs" we never have US Dollar/en_US selected in System Preferences.
Task-number: QTBUG-58784
Change-Id: Ic2c3a3172bf1e715e99092ddee8f461b216d995a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The runUpdateMimeDatabase() call was timing out on the CI due to
running out of the default 30s timeout for QProcess::waitForFinished()
(on my machine, that call takes less than 0.5s, reliably...).
Increase to two minutes.
Change-Id: I61b2e060ea9c2508b853847ba7040ad499e0084c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
When one of the QCOMPAREs in Consumer::run() fails, the consumer
returns early, leaving the producer deadlocked in a QSemaphore's
acquire() call. Change these to tryAcquire() with a large timeout,
so the producer, too, eventually leaves run().
Change-Id: I7421d43305decd4754e09c8e092363594d1be06b
Reviewed-by: David Faure <david.faure@kdab.com>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58741
Change-Id: I43196d3a27f726fb96b427f5071e726b571a0404
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
We can defer the creation until the window is shown.
Change-Id: I3d5b45ae59ee0925996cf12cd46dd574c8c6ef95
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add proper support for 'so' and 'bundle' suffixes. Qt wrongly assumes
.so libraries are not versioned on Apple platforms, which is
wrong. Also, the shared library .bundle which is what Apple recommends
instead of .so, are also versioned (not to be confound with the
different Core Foundation bundles, which are directory hierarchy).
For more info, see http://docstore.mik.ua/orelly/unix3/mac/ch05_03.htm.
Especially the part that reads:
"Loadable modules, called bundles in Mac OS X, have the file type
MH_BUNDLE. Most Unix-based software ports usually produce bundles with a
.so extension, for the sake of consistency across platforms. Although
Apple recommends giving bundles a .bundle extension, it isn't
mandatory."
Task-number: QTBUG-50446
Change-Id: Iacd5136397a12d65d83821434f332eb602550b4b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit b0c1e07d64.
The unit tests it introduced trigger errors with the macOS and
Win32 implementations, which means the there's something seriously
wrong with either the API, our implementation or the tests.
Revert for now until this gets fixed. Blacklisting was also the
wrong tool to use. The tests should have used QEXPECT_FAIL.
Change-Id: Ida20c6bbe0c019835a22464535029585e8e1e367
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There weren't any, at all.
Testing on the CI showed that the implementation is broken on
macOS, and, to a lesser extent, on Windows, so blacklist the
failing tests until the implementation can be fixed. No need
to hold back testing the other implementations.
Task-number: QTBUG-58737
Change-Id: I9ae16ab778dbe2e95a6ca5e0bae00df4bad65cb2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was determined to be flaky on the CI, depite attempts
to stabilize it (b750a3786f).
Task-number: QTBUG-58745
Change-Id: I933199cd537002699906147d172bb797f1dc90c1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58713
Change-Id: Ie6e6a69b8ea625e3a3102c88d52f1f0fbec242aa
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
I didn't even try to understand what the old code was trying to do;
once you're told by a user that the code is wrong, you see that it is.
Fixed by just using the row as passed to takeRow() instead of trying
to do some storage-index calculations. The m_matrix indexing operator
does it all for us.
Added a test that checks that the expected field widget gets
returned. Fixed expected test data that was wrong, and just checking
that the implementation behaves as implemented, instead of as
documented.
Amends change 8fbae648db.
[ChangeLog][QtWidget][QFormLayout] The functions takeRow() and
removeRow(), new in 5.8.0, now take and remove the correct row.
Task-number: QTBUG-58693
Task-number: QTBUG-15990
Change-Id: I7185ccbc6c03e2579741cad5c0c821d3ed165474
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When a non-QString-backed mode (via the (QChar*, int) ctor) was added
for Qt 4.5, the author forgot to adjust the setCaseSensitivity()
function. It still uses q_pattern instead of (p.uc, p.len) as the
pattern for which to create the skip-table. Since there is no
setPattern() overload for this mode, the correctness of the matcher is
not harmed by this, but its performance degrades to that of a linear
scan: the skip-table, being filled from an empty pattern, will be
all-zeros, sending bm_find() into the 'possible match' case at every
character.
Since matching is still correct, but slow, it's not possible to write
a test for this. I did, however, leave my attempts in the auto-test,
for when we add QStringView overloads of setPattern() which will then
be able to expose the bug.
Change-Id: I7b803e8624b0352a0a974900affbbfc0c260d93b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The setData method of an item view would get an incorrect value of a
QDialog's result. This patch changes the order of functions called to
fix that.
[ChangeLog][QtWidgets][QDialog] Fixed a bug where accessing the result
of QDialog's result could yield an incorrect value in some situation
like using it as a delegate for item views.
Task-number: QTBUG-6018
Task-number: QTBUG-12156
Task-number: QTBUG-14430
Change-Id: I6ee4b6e8cacf6a806631c05c6c5dbcff925df65e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Remove the line setting the DPR from the source; the image
is moved.
Task-number: QTBUG-58653
Task-number: QTBUG-58645
Change-Id: I2de94681459dba1d69dee06da44617fb9fa35bcc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
As explained in
https://blogs.kde.org/2009/03/26/how-crash-almost-every-qtkde-application-and-how-fix-it-0
creating dialogs on the stack is a bad idea if the
application or the dialog's parent window can be closed
by means other than user interaction (such as a timer or
an IPC call). Since we cannot know whether Qt is used to
build such an application, we must assume it is, create
the dialog on the heap, and monitor its lifetime with a
QPointer.
Instead of using manual resource management, add a
minimal implementation of QAutoPointer, and use that in
all static get*() functions.
Task-number: QTBUG-54693
Change-Id: I6157dca18608e02be1ea2c2defbc31641defc9d1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
When a QFile object is reused, the atEnd() method may return incorrect
values. The reason for this is that QFileDevicePrivate::cachedSize is
not cleared. Setting cachedSize = 0 in the close() method fixes this issue.
Task-number: QTBUG-57698
Change-Id: I828a2cf844e98d581098f2c781fa47d2cd3275ce
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
At 200 ms, the error on first firing could be 10 ms.
Task-number: QTBUG-58519
Change-Id: Ifaee7464122d402991b6fffd14a02a4ce782f11f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
On macOS, the code that read the plist is using
QByteArray::fromRawCFData. When we return the data directly
we need to detach the QByteArray so that it does not point
CFData's data that will get deallocated just after the call.
Task-number: QTBUG-58531
Change-Id: If829a304b986c99c8fc2aeeb992f2d539a4eef3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When calculating the width of a text for drawing decorations on top,
we use the effective advance of the whole text after it has been
through the shaper.
However, in the case of QStaticText and QGlyphRun, there is shortcut:
Since we only have the glyph indexes and position of each glyph,
we use the position + advance of the right-most glyph to find the
right-most edge of the decoration. For this, however, we use the
advance of the glyph *out of context* of the rest of the string,
because the whole idea is to avoid doing the shaping of the string
with every draw call. In some rare cases, the advance of the
right-most character, in the context of the string, is different
from the advance of the standalone glyph.
Now, one way of fixing this would be to store the width of the
text in QStaticText and QGlyphRun, but since it is a very rare
artifact which is barely visible, I have opted to just work around
it in the test instead, the workaround being to force integer
metrics so that we don't get the small 0.2 pixel error.
Task-number: QTBUG-55217
Change-Id: I8d16d52f2ef27275cabb7d3865aeeaa31617ba3d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Recent HB changed the way of handling ZWJ/ZWNJ to be more in par
with other engines.
Change-Id: I8abacd195e4b247c8fa6d91ef1086e74da0a1efb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The QFontMetricsF version of the test should not truncate the
returned values, as the results may then be wrong.
Change-Id: I17f97f846bb723709e695e8866e437d6888d275b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
OpenSUSE has a bitmap font called "Waree" while the test
is created for the TrueType font which is available on Ubuntu.
The style names are different, so we can use that to check
that we have the right one.
Change-Id: I808d0d1ecde9f10ed7730dc76ab3818490002ba9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
As used in recent qtdeclarative commits, so better make sure it keeps working.
Change-Id: I6d0ceda76201e3e7f75661cb6449e1ff32329126
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt already supports high DPI icons using the “@nx” approach, where the
device pixel ratio that the image was designed for is in the file
name. However, our implementation of the freedekstop.org Icon Theme
specification did not support the Scale directory key:
https://standards.freedesktop.org/icon-theme-spec/icon-theme-spec-latest.html#directory_layout
This meant that users creating icons via QIcon::fromTheme() did not
get high DPI support. This patch fixes that.
[ChangeLog][QtGui][QIcon] Implemented support for Scale directory key
according to Icon Theme Spec. Icons created via QIcon::fromTheme()
now have high DPI support by specifying the Scale in the appropriate
entry of the relevant index.theme file.
Task-number: QTBUG-49820
Change-Id: If442fbc551034166d88defe607109de1c6ca1d28
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
There was a test that tested this, but was wrong.
[ChangeLog][QtCore][QVariant] Fixed a bug that caused wrong results for
comparisons of QVariants containing either NaN or infinite numbers.
Task-number: QTBUG-56073
Change-Id: I33dc971f005a4848bb8ffffd1475d29d00dd1b7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This constitutes a fairly complete submission of an entirely new
floating point type which conforms to IEEE 754 as a 16-bit storage
class. Conversion between qfloat16 and float is currently performed
through a sequence of lookup tables. Global-level functions
qRound(), qRound64(), qFuzzyCompare(), qFuzzyIsNull(), and
qIsNull() each with a qfloat16 parameter have been included
for completeness.
[ChangeLog][QtCore] Added new qfloat16 class.
Change-Id: Ia52eb27846965c14f8140c00faf5ba33c9443976
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Under certain circumstances, VS2015 reported ambiguous options in using
the operator>(Enum,int) operator. This change adds a static_cast<qint64>
to remove any ambiguity. In the process of testing this change, a gap
in the existing logic was identified: the handling (just in the test
code) of large negative enum values. Consequently, and additional
test case was added, and additional if-conditions were added to account
for that case.
Change-Id: Ife2c471ba4caa4b9a0107722042114e58145c4d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The first one was already suppressed for GCC, so also do that for clang:
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:1076:16: warning: format string is not a string literal (potentially insecure)
[-Wformat-security]
a.sprintf( zero );
^~~~
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:1076:16: note: treat the string as an argument to avoid this
a.sprintf( zero );
^
"%s",
The second one could also occur with other compilers, so fix it in a
generic way.
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:6382:5: warning: ignoring return value of function declared with
warn_unused_result attribute [-Wunused-result]
string.repeated(3);
^~~~~~~~~~~~~~~ ~
2 warnings generated.
Change-Id: Id999179e795580a37b5be673ee54d6fa1a006dd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because on Windows, the .ini files are saved with CRLF, but the files in
the Qt resource are just LF (.gitattributes makes them so).
Task-number: QTBUG-25446
Change-Id: I5eab0d9620bd1ba675b0a87c554f62cef0f98fcc
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In some situations, this allows for nicer code. It's also possible to
make this constexpr in C++11, whereas the mutable transpose() would
require C++14-style constexpr.
The new function should also be faster, since it just swaps the member
variables.
Because of constexpr-function limitations, the way the return value is
constructed needs to depend on the level of the compiler's C++11 support.
This is not the only class that requires uniform init to provide a fully
constexpr interface (QUuid and QBasicAtomic come to mind), so this should
probably be generalized across Qt at some point.
Added tests.
[ChangeLog][QtWidgets][QSizePolicy] Added transposed() method.
Change-Id: Ic1077a0d5a861e7c63bd1daeeb42b97c3a2f71ef
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Also add a basic test for constexpr expressions involving QSizePolicy.
GCC < 4.8.0 has problems with initializing variant members in constexpr ctors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54922
Instead of revoking its Q_COMPILER_CONSTEXPR, which is a source-incompatible
change, simply note the fact so we can selectively provide constexpr for
QSizePolicy.
Change-Id: Iba8e5a7cdf847d73e8e2b6bb6211fb3c9846aa0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- port from inefficient QLists to QVector
- mark types held in Qt containers (incl. QVariant) as Q_MOVABLE/PRIMITIVE_TYPE
- remove pointless user-defined copy special members which prevent the class
from having nothrow move special members
Fixes errors reported by my local tree's static checks.
Change-Id: If3910484cea81a8e2c5ab737908c9443f75782c5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The equality operator was supplied, but this one was missing.
[ChangeLog][QtNetwork][QHostAddress] Added op!=(SpecialAddress, QHostAddress).
Change-Id: Iad9c55fa0ee7a8e97d5e4ea4be0605b8b74649d1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends 7896ae052a. The previous change
focused only on ZWJ and ZWNJ, but there are many other formatting characters
that we need to support and that may be rejected by the German keyboard-hack.
This opens up for all characters in the Other_Format category.
Task-number: QTBUG-58364
Change-Id: Idd967a9ae5b12060c851f6030b7e019508561696
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In tst_QDBusMetaObject::types(), hold a QMetaObject obtained from
QDBusMetaObject::createMetaObject() in a QScopedPointer instead of
leaking it. Use correct return value type.
This fixes the remaining errors in GCC 6.1 Linux ASan runs of
tests/auto/dbus.
Change-Id: I1df7f8e42d45f40ecf381fe7b684a8ab5ebee675
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The char* returned from QTest::toString() calls must be manually
delete[]ed.
Change-Id: Iad078e8741e3e97693b1a417693f414b3fb3ec09
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Taken QTreeWidgetItems need to be deleted, as do items
created without a parent, and widgets without parent.
Change-Id: I7ffa69903af9a1b92ba308f9f9416aec1d6d975f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... for calculated test data names.
That involved removing the leading ", " from test name literals
(folding it into the format string) and porting from some QString code
to QByteArray to make the result usable with addRow(), which does not
support %ls...
Change-Id: Icb2344778203f10939ae46b9e46872101f3878a9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There was an off-by-one error in the while loop for aarch64: we start
counting at 0 for the first position, so the last valid input position
is "a+7", not 8.
This wasn't covered by the tests, nor was the SSE2 version, so now there
are also tests for both versions.
Change-Id: I7eb8c5708e6179f45ea56885b0e66e1a37969c1d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the new QImage method instead of operating on private API.
At the same time the code is improved to ensure the QImage is detached.
Change-Id: Ia015c0bb18d7bc62da38397594730254843e5a0d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Implements isNull for QVariants of a nullptr so they always return
true to isNull(), instead of depending on how they were constructed.
Task-number: QTBUG-58296
Change-Id: Ibddec795cdadedef7e17d22c265c29e752d8f99f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Do not wait up to the timeout ms after already having waited several
times. At the same time upgrade to using the QDeadlineTimer which
is designed for this purpose.
Change-Id: Iaf5e4f4655605d5143ce91040c6eb6706752e504
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the qWait() and introduce a QTRY_COMPARE()
checking for the end value first.
Task-number: QTBUG-58402
Change-Id: I2d3758178de5f67881008f28c406076ad27c4a90
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The regression was introduced in d8857f21ac. The original change was
meant to fix support for SVG icons, but failed to take into account
a valid QIcon with no sizes, but which is also unable to create
a pixmap for the requested size.
Task-number: QTBUG-58344
Change-Id: I7ac1dbfaf6e3dab8581fe4b33c814e2517fcdba8
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Rewrite tcpSocketNonBlockingTest() and downloadBigFile() to use lambdas for
the slots. This allows for removing the related member variables and slots
of the test class and ensures no leaks of sockets or inconsistent values.
Add an error handler printing the error message to the flaky downloadBigFile()
test.
Change-Id: Ieb64063c41e045a1a50a6d074bef01753ee319ef
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This change allows painting via QPainter onto a QOpenGLWindow, QOpenGLWidget
or QOpenGLFramebufferObject when an core profile context is in use. This is
important on macOS in particular, where compatibility profiles are not
available, and so the only way to use modern OpenGL is via a core profile
context.
Added core profile compatible shaders with moder GLSL keywords.
The paint engine binds a VAO and two VBOs from now on, whenever VAOs are
supported. Note that this changes behavior also for OpenGL 2.x context that
have VAO support via extensions.
The Lancelot test suite gains support for core profile contexts. This can
be triggered via -coreglbuffer in place of -glbuffer when manually inspecting
via 'lance', while tst_lancelot will automatically run core context-based tests
whenever supported.
Task-number: QTBUG-33535
Change-Id: I6323a7ea2aaa9e111651ebbffd3e40259c8e7a9c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Use QTRY_COMPARE with a timeout to check for the stopped state
unless BAD_TIMER_RESOLUTION is defined.
This speeds up the test by 1s and prints diagnostic information
should an interval be too short (as seems to be the case on macOS,
currently).
Change-Id: I8f884cd66ad33314124d3130d9f49606e6dfe9f3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
HTTP Strict Transport Security (HSTS) is a web security policy that
allows a web server to declare that user agents should only interact
with it using secure HTTPS connections. HSTS is described by RFC6797.
This patch introduces a new API in Network Access Manager to enable
this policy or disable it (default - STS is disabled).
We also implement QHstsCache which caches known HTTS hosts, does
host name lookup and domain name matching; QHstsHeaderParser to
parse HSTS headers with HSTS policies.
A new autotest added to test the caching, host name matching
and headers parsing.
[ChangeLog][QtNetwork] Added HTTP Strict Transport Security to QNAM
Task-number: QTPM-238
Change-Id: Iabb5920344bf204a0d3036284f0d60675c29315c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QtCore][QFileSelector] Removed the requirement for an unused
default base file in case you want to load only a variant.
When the base file (e.g. /image.jpg) was missing, no selectors were
considered and it was not possible to load variants of this file (e.g.
/+android/image.jpg, /+android/+tablet/image.jpg) without specifying the
directory as well.
As a work around, one previously had to place a default file in
the base location, which is undesirable in some cases because:
1. The extra file consumes unnecessary space.
2. It is impossible to encapsulate platform-specific implementation
details by hiding files in a subdirectory.
Task-number: QTBUG-51230
Change-Id: I4c7f9ec952bff6e5b7738d8cabe3c762c208a38e
Reviewed-by: Robin Burchell <robin.burchell@crimson.no>
This is a version of QByteArrayMatcher that calculates the
Boyer-Moore skip table at compile-time instead of at run-time,
making this class more generally applicable than QByteArray-
Matcher itself, at least for statically-known strings.
The compile-time part requires C++14 constexpr support, but
the class should compile and work even in C++98 mode, just
with runtime initialization of the skip-table.
While touching tst_qbytearraymatcher, clean up the static
global QByteArrayMatchers there and add tests with needles
longer than 255 characters for QByteArrayMatcher, too.
[ChangeLog][QtCore] Added QStaticByteArrayMatcher.
Change-Id: I0662f262ab19b79ae4096f3ab384d5b3ada72347
Reviewed-by: David Faure <david.faure@kdab.com>
When a platform menu bar is used, the QMenuBar is hidden, so shortcuts
for QActions attached only to it do not work.
Extend the macOS-specific code to treat such menubars as visible to
other platforms, to make the shortcuts work.
The exception is made for internal QMenuBar shortcuts, which are
forwarded to the platform menu. A follow-up change will add support
for this to QDBusPlatformMenu. The updateGeometries() method is called
for platform menu bars too to make sure the internal shortcuts are
registered even if the global menu is in use.
Add two cases to the tst_QMenuBar::activatedCount() test to test
both native and non-native menu bars when possible (it now passes with
native menu bars too).
Change-Id: I2d7128512719ac199cd3f8f7ba28333d04d84ed4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
With this new policy, after emitting 'redirected', QNetworkReplyHttpImpl
waits for client code to decide if QNAM should follow this redirect or
not. The client can either allow this redirect by emitting 'redirectAllowed'
or abort the reply.
Task-number: QTPM-236
Change-Id: Ia04619f6bd1f0caa477833ae859b24033027b2e1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_qaccessibility.cpp: In member function 'void tst_QAccessibility::treeTest()':
tst_qaccessibility.cpp:3005:75: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
tst_qaccessibility.cpp:3008:75: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
tst_qaccessibility.cpp: In member function 'void tst_QAccessibility::tableTest()':
tst_qaccessibility.cpp:3133:75: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Change-Id: I175af3215258c70da8284907f5ddfe95abf41029
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
QImage::reinterpretAsFormat can be used to change the format of an image
without converting the data, to correct wrong formats or narrow the
format to an opaque one if found to be opaque.
[ChangeLog][QtGui][QImage] A new method reinterpretAsFormat is has been
added to change the format of a QImage without converting the data.
Change-Id: I5e15bc5a1c474a35d3921b06299008ab2effd945
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This commit simplifies defaultParameters() to simply construct an empty
QSslDiffieHellmanParameters and assigning the DER-form of the DH parameters
to QSslDiffieHellmanParametersPrivate's derData field.
This creates a valid QSslDiffieHellmanParameters instance, but skips any
potentially expensive verification steps.
The previous implementation of defaultParameters() would use the public
fromEncoded() method to construct an instance of the default parameters.
This triggers a verification of the passed-in data, which can be expensive.
To ensure our defaultParameters() QSslDiffieHellmanParameters instance does
pass verification, this commit adds an autotest to verify that.
Fixes QTBUG-57815.
Change-Id: I6b1d9dbbfde526b232c319195ddbad42326be27c
Task-number: QTBUG-57815
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This patch makes it possible to enable/disable redirects on QNAM
level (before it was per-request only). This policy would be applied
to all subsequent requests* created by QNAM.
The policies we support at the moment:
a. Manual - that's what we always had - it's up to a user to handle
redirects.
b. NoLessSafeRedirectsPolicy - we allow http->http, http->https and
https->https redirects, but no protocol 'downgrade' (no
https->http redirects).
c. SameOriginPolicy - we check that protocol/host/port are
the same.
Updated tst_qnetworkreply.
*We previously were enabling redirect for each request, by
setting FollowRedirectsAttribute on QNetworkRequest object.
For backward compatibility this attribute has a higher priority
(if set) than QNAM's policy (and it will work as NoLessSafeRedirectsPolicy).
[ChangeLog][QtNetwork] Added redirects policy to QNAM
Task-number: QTPM-239
Task-number: QTPM-237
Change-Id: I493d1728254b71b61b5504937e8e01dca5953527
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The size of flowPositions is larger by one than the number
of rows in the model so the last correct row number is
flowPositions.count()-2, not flowPositions.count()-1.
Change-Id: Idf8bbd155151d553947d5d299dd01ffaff0c95fa
Task-number: QTBUG-47694
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: David Faure <david.faure@kdab.com>
Sometimes it is desirable to use a new connection but keep already
entered user credentials for usability reasons. This is now possible by
clearing the connection cache (but keeping the authentication cache).
Change-Id: I2f5f64836ce19f81c8525701783a3da823dd468e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
qHash(QHostAddress) was added in Qt 5.0 (at least the version with uint seed = 0).
op==(QHostAddress::SpecialAddress, QHostAddress) was there since QHostAddress was
added before public history. Since QHostAddress does not have a \since, the I did
not supply one for op==, either.
Since the equality operator did not have unit-tests, added one.
Change-Id: I954a0df02464338f08a12ca58d4cc0ceb013e67a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLayout::replaceWidget() doesn't delete the affected item, but returns it.
Change-Id: Ibda96e4bf2432ad13ed2908c7d37547f46e29a37
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
C++17 adopts P0021R1[1], which makes noexcept be part of the function
pointer's type and thus be overloadable. It contains some provisions for
allowing a noexcept function pointer to cast implicitly to a non-
noexcept function pointer, but that fails in the presence of templates
and additional overloads that could match the type in question.
Fortunately, the paper proposed a test macro, so we can change our
sources now and be compatible with both C++14 and C++17 rules.
This first failed with Clang 4.0 trunk. This source incompatibility is
not our fault, it's the language's doing.
[1] http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/p0012r1.html
Task-number: QTBUG-58054
Change-Id: I2bc52f3c7a574209b213fffd14988cf0b875be63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
So that QFlags can use an (un)signed int matching the
underlying type as identified by the compiler and not by us.
Requires fixing a few warnings about sign conversion due to
QFlags misusages in qtbase that were either plain wrong, or
were relying on the enum being backed by an (un)signed int
when it wasn't.
Keep qtypetraits.h in the source tree in order to prevent
source breaks if some downstream #includes it (note however
that it did not contain any public API).
Change-Id: Ib3a92b98db7031e793a088fb2a3b306eff4d7a3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This property allows to change the default behavior in
which list items occupy the entire width of the column.
Setting it to false will reduce their widths to the
minimum values, thus allowing to have intermediate free
space. Then the user will be able to begin selections
by mouse from this space.
[ChangeLog][QtWidgets][QListView] Added expandingListItems property.
Change-Id: I6bd1b147fd0335324310a165104c36f6b0d6ac9f
Task-number: QTBUG-56606
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
... along with the two matching unused methods of QDateTime's test.
Change-Id: Id11a4b1b0132587f0df451d49c0043e9425d87ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore] QCoreApplication::applicationVersion now defaults to
an appropriate platform-specific value. On Windows, it defaults to the
PRODUCTVERSION parameter of the VERSIONINFO resource for classic desktop
apps, and the version attribute of the application package manifest for
Univeral Windows Platform apps. On Apple Platforms (macOS, iOS, tvOS,
watchOS), it defaults to the CFBundleVersion property of the information
property list (Info.plist) file. On Android, it defaults to the
android:versionName attribute of the AndroidManifest.xml manifest
element. On other platforms, the default remains an empty string.
Task-number: QTBUG-57715
Change-Id: I26f83dd00737e06f4321cf962aa5fab8398104ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The style name needs to be cleared if not present in the string,
otherwise the style name from qApp->font() (which propagates to
any default-constructed QFont) remains.
Change-Id: I9b6522a39a38526cced8a11ed02ae32582026480
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
The test failed if qApp->font() had a styleName() set,
when testing old serialization formats which didn't serialize it.
Change-Id: If0236d354be144b3a990e074a22f796fffb1ed18
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
QVERIFY(a==b) is less useful than QCOMPARE(a, b) in case of an error.
Change-Id: Ibd294e7a1e9b55a9780551869c8477f6e41355ac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This avoids so many complications. The prior code, using
SystemTimeToTzSpecificLocalTime(), lead to unhelpful results when the
QDateTime() implementation used MS-POSIX's defective mktime().
Although SystemTimeToTzSpecificLocalTime() is actually more correct,
we were getting inconsistent results by mixing the two: and
eliminating the use of mktime() turns out to be decidedly tricky. So,
to avoid inconsistency, stick with a UTC time (which is what FILETIME
is defined as). Change QFileInfo's methods to explicitly convert
.toLocalTime() where appropriate and document that these methods do
indeed return local time (as we conjecture has been taken for granted
by callers).
Also added a regression test for the reported case of this going
wrong. A time-stamp from before Russia's (permanent, not DST) change
of TZ could end up inconsistently handled between file-system
meta-data and raw date-time APIs, due to cross-talk between different
MS-Win time APIs.
[ChangeLog][QtCore][QFileInfo] Made sure that all file lifecycle times
are in local time. This was probably true before, but is now explicit.
Task-number: QTBUG-48306
Change-Id: Ic0b99d25c4168f623d31967bc60665c0c4f38a14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Fix the case when we erroneously handled stream ID == 0 in a GOAWAY frame as
an invalid stream ID.
- _q_receivedReply: convert do{}while() loop into to while(){} to prevent
it from handling any frames after GOAWAY frame received and all active frame
finished.
- sendRequest - if we received GOAWAY, also clear spdyRequests in the connection
channel, otherwise it keeps re-trying to send requests!
- Http network connection channel never resets a protocolHandler in _q_encrypted/
_q_connected, which is BAD for HTTP/2, since HTTP/2 has unique per-connection
compression context and must be reset - now we recreate the protocol handler in
_q_encrypted or _q_connected (https/http).
- Update autotest.
Task-number: QTBUG-57600
Change-Id: Ib864ce52287bab23334ff43a83ba4b0b7cb52c60
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Updating the focus child means the focus object of the window has changed.
We need to report this to QtGui immediately so that it can e.g. inform the
input context of the new focus object, before widgets reacting to the focus
events start calling update() on the input method.
Change-Id: Ie3f7b835591e71519e3f384c2abdad53242c9736
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The population of data rows was factored into a separate file, qutf8data.cpp, in
commit e20c4730. Merge commit 9bd03235 failed to track a conflicting change into
the new file, and brought the code back into the tst_utf8.cpp, where it has been
duplicating the utf8data data ever since.
Change-Id: I4282685b882448f927289468bd7ab340a21ea0b3
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For language "Traditional Chinese" on iOS with region "US",
the logic was formerly to attempt a match on country/language/script (fail),
followed by country/language (which would result in script defaulting to
"Simplified"). Now, the logic is to try language/script first if script is
specified. Failing that, language/country will be attempted.
Task-number: QTBUG-39639
Change-Id: I75a774b1e66686e95167ff221458a97a7ea2660d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jason Erb <jason.erb@sparist.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The future tests don't need QtConcurrent as QFuture and friends are in
QtCore. The printdevice test doesn't use QtNetwork and the lancelot as
well as the testlib tests don't use QtXml.
Change-Id: I150ac99b36682aa23ad22ba943266eb0f0952838
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This new function does the same as newRow(), except that it has a less confusing
name (in line with _add_Column()), and accepts printf-style arguments to avoid
the need to newRow(qPrintable(QString::asprintf())), a common pattern in client
code. It uses qvsnprintf() under the hoods, avoiding the need for the QString
const char* round-trip.
Port all in-tree users of newRow(qPrintable(QString::asnprintf())) to the new
function.
Change-Id: Icd5de9b7ea4f6759d98080ec30f5aecadb8bec39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A directory is empty when it doesn't contain files or folders.
We can exploit QDirIterator::hasNext() to check whether this is the
case. This is efficient since it doesn't list the whole folder (in the
non-empty case).
Test cases are added for both the empty and non-empty cases.
Change-Id: I0f7e26782c0f97f9c16f928dab6cae37927875d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch improves the handling of mime type filters in QFileDialog.
The main change is in selectMimeTypeFilter(), which was just falling back
unconditionally on selectNameFilter(). Instead, mime type filters should
have an higher priority than name filters.
This patch also adds a new selectedMimeTypeFilter() method, which is used in the unit test.
Change-Id: Ice8bb08f5ff46e4a942d539f6001424eca878f74
Reviewed-by: David Faure <david.faure@kdab.com>
- port Q_FOREACH to C++11 range-for
- port uses of inefficient QLists to QVector or C arrays
- port uses of dynamic containers with static content, to constexpr
C arrays
- fix algorithmic mistakes:
* use adjacent_find with greater<> to emulate C++11 std::is_sorted
instead of sorting the range and comparing it with the original
(and not even using stable_sort to do this).
* use std::unique == end() to detect absence of duplicates instead
of poplulating a QSet and comparing its size with that of the
original range.
* use a simple QCOMPARE instead of populating a QSet with statically-
known content, removing known options to be able to check that the
remaining options are unknown
Fixes errors pointed out by my tree's static checks.
Change-Id: I935dbc21d56b55889d96aaf6ec179624c6ce9047
Reviewed-by: David Faure <david.faure@kdab.com>
We have to enable qt_safe_ftok with either sharedmemory or
systemsemaphore. In order to make the resulting QT_CONFIG work with the
bootstrap library we switch the features off for bootstrapping. Some
tests and examples have to be excluded when sharedmemory is not
available.
Change-Id: I3fc3926d160202b378be2293fba40201a4bf50c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
May of the tests initiate a scan / update of the network configuration
and expect the API to deliver exactly one update. This turns out to be a
race condition as the update may be emitted multiple times, as
QNetworkConfigurationManagerPrivate::updateConfigurations() is called
via posted events (queued signal emissions) from the bearer thread, and
so after creating the spy we may receive an update from _before_ and end
up emitting the signal multiple times.
Task-number: QTQAINFRA-1040
Change-Id: I931e2907f0cb86d48b4ab1a8795d75206035ea11
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added isObsolete and setObsolete functions to QUndoCommand that signifies
a command is not functional. This is useful for when two commands are
merged in such a way that the merged command does nothing. Another
particular use is with networking commands in which the command fails
due to connection issues. The command is considered obsolete because the
undo/redo functions do nothing since the connection failed.
This property is checked in QUndoStack::push(), QUndoStack::undo(),
QUndoStack::redo(), and QUndoStack::setIndex(). The obsolete flag is
checked after QUndoCommand::undo(), QUndoCommand::redo(), and
QUndoCommand::mergeWith() is called where applicable. This allows the
user to set the obsolete flag within the QUndoCommand class and it will
be deleted directly afterwards.
Task-number: QTBUG-54970
Change-Id: Ia8e962ff3aa16515e8f9e2180aee5e1d726d5ba3
Reviewed-by: David Faure <david.faure@kdab.com>
An overflow-check needed the datum for the "min" test to be minus the
datum for the "max" test; so explicitly make the former use -max()
instead of synthesising it as min()+1. This simplifies the
explanation of why that's needed, too. Clarify the overflow-check's
comment at the same time.
Change-Id: I41f56764fdf5e8c749bfae7a685e5fb77d37b3a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When saving state for a 3-columns headerview and then restoring that
state onto a 5-column headerview, the headerview shouldn't suddenly think
it has 3 columns.
Rather than making restoreState() fail, we adjust for the additional
columns, so that we can still apply the customizations from the user to
all other columns (hiding, moving, etc.).
Change-Id: I3f220aa322ea8b629d2fe345f8cde13e0ea615d6
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
... after a member-function declaration: this would be a compilation error
anywhere outside of a class-definition, allowed as 'opt' inside a class-definition
and essentially not needed at all (and is already different from other
member-functions we have in the same code).
Change-Id: Ia689a41bf2a1052cd19eb8fb4766ed9635c20c88
Reviewed-by: Jesus Fernandez <jesus.fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
ISO 14443-3 is for nfc communication and uses 2 different checksums.
The existing one is from ISO 3309 and the other one is from ITU-V.41.
Both are needed to implement an own transport layer defined in ISO
14443-4 to allow nfc commands with a length above 250 byte independent
from the smartphone.
This change will avoid code duplication in QNearFieldTarget.
The private function qNfcChecksum is a copy of qChecksum.
Change-Id: I790ffec8e2ea46f88b2db6f48b64fdcb140e7b70
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The separator character is inserted in the resulting array
after every byte and is useful for MAC address output like
01:23:45🆎cd:ef, Hash fingerprints, or low level data
debug output.
[ChangeLog][QtCore][QByteArray] Added toHex() overload to
insert a separator character between the hex bytes.
Change-Id: Ibe436094badc02f3ade7751aa8b5d690599941d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it depend on the corresponding Private target of each
dependency. This way, user code can write
find_package(Qt5Gui REQUIRED)
add_executable(hello hello.cpp)
target_link_libraries(hello Qt5::GuiPrivate)
and get the private include directories for both Qt5Core and Qt5Gui.
Don't create the Private target if any of the private include
directories do not exist. This way, if user code uses one of the
targets, CMake will issue an error if the private include directories do
not exist. Unfortunately the error is somewhat cryptic (eg, 'the
"Qt5::CorePrivate" was not found'), but this is still an improvement
over an error at compile time.
This is an improvement on the situation described in QTBUG-37417 using
Modern CMake features.
Change-Id: I034f8216c3ec64d1a3309682456a713cac9bf854
Reviewed-by: Kai Pastor <dg0yt@darc.de>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
This used to work only for 0- and 1-pixel wide handles. However,
and paradoxically, 2- and 3-pixel wide handles would end up with
narrower grab areas. We now ensure a 4 or 5 minimum grab area,
depending on the handle width parity.
The patch also clears the margins and mask if the handle size is
increased at some point.
Change-Id: I8a16e39fb34b5452d9021dbde8c22bec79df0243
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Many of the tests still use the old connection signal/slot syntax for
tests. Since I recently made a change to one of the tests within the
Widgets/Util folder, I went through and updated the entire folder to the
Qt-5 connection syntax.
Change-Id: Iaaa5a38858eed41fbc897b66ef291f08458505f1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Callers can persist a QModelIndex which was not persisted before in a
slot connected to the signal, and such a persisted index must be updated
in the course of the layoutChange.
Store the indexes to persist after emitting the signal.
Task-number: QTBUG-32981
Change-Id: Ibee4c0d84817d72603a03fe5b22fdeefeac0695e
Reviewed-by: David Faure <david.faure@kdab.com>
Similar to the fix in the parent commit, incorrect updating of the
internal data structures during layout changes can lead to dangling
pointers being dereferenced later. Moves are treated as layoutChanges
by this proxy by forwarding to the appropriate method. However, data is
incorrectly cleared prior to that forwarding. Remove that, and let the
layoutChange handling take appropriate action.
Change-Id: Iee951e37152328a4e6a5fb8e5385c32a2fe4c0bd
Reviewed-by: David Faure <david.faure@kdab.com>
In sourceLayoutAboutToBeChanged the source model update is ignored if
the affected parents are filtered out anyway. The same logic is
attempted in the sourceLayoutChanged slot, but there the early-return
logic is applied too late - the mapping is cleared before performing the
early-return. Because pointers into the mapping are used in the
internalPointer of QModelIndexes in this class, persistent indexes used
later will segfault when attempting to dereference it.
Additionally, if a parent becomes invalid as a result of the
layoutChange, it would be filtered out by the condition in the loop,
resulting in a different result in the comparison of emptiness of the
parents container.
Fix that by persisting the parent's container, and performing the test
for early-return before clearing the mapping.
Task-number: QTBUG-47711
Task-number: QTBUG-32981
Change-Id: If45e8a1c97d39454160f52041bc9ae7e337dce97
Reviewed-by: David Faure <david.faure@kdab.com>
This decouples QProcess and QProcessEnvironment, since the latter may
actually be available on platforms where the former is not.
Change-Id: I3dc799ffdf94486b64143ed01a369897fff44a96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
