In Xcode, the default value for GCC_GENERATE_DEBUGGING_SYMBOLS is YES,
which causes Xcode to emit debug symbol bundles (.dSYM) on macOS and iOS
*if* DEBUG_INFORMATION_FORMAT is also set to dwarf-with-dsym. Since that
setting is already set to an appropriate value with debug vs release
builds, the default Xcode value for GCC_GENERATE_DEBUGGING_SYMBOLS is
already correct and in effect the only thing qmake was doing was always
setting GCC_GENERATE_DEBUGGING_SYMBOLS to a wrong value for release
builds - it should be YES in all cases, to allow the .dSYM bundles to
be generated in release mode, which is in fact the only case where
they're really needed in the first place.
Task-number: QTBUG-41246
Task-number: QTBUG-50896
Change-Id: I07639a3c4ff9f62d591cde3ad66748767d475e3b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This helps alleviate a performance issues where by building iOS based
projects takes a significantly longer amount of time than it should.
Task-number: QTBUG-59136
Change-Id: I77ae12f507725ceb11106b484d73bb7d46e0845c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is C++, not qmake code. Amends 5fa6438633.
Change-Id: Ie5b88c3a06dbe089948488ea3b4b297a08164113
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
SYSTEM is used for system() calls, while SHELL is used in the target
Makefiles.
Task-number: QTBUG-62985
Change-Id: Ia75d3939c59c98699359421166433e8b4a6ee35e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
All calls to QINSTALL or QINSTALL_PROGRAM were written into Makefiles
with a preceding dash which lets make ignore the command's exit code.
Scripts (and users) calling 'make install' had no way to determine if an
installation completely succeeded, unless they inspected make's output
or the installation tree.
Remove the leading dash from those commands to stop 'make install' on
failure. Users who really want to ignore the exit codes can run 'make -k
install'.
[ChangeLog][qmake] Installation targets do not ignore the exit code of
QINSTALL and QINSTALL_PROGRAM anymore.
Fixes: QTBUG-18870
Change-Id: I7c072c896e6bd2b2ddba4b9c082c5bf627c90f50
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Debug/release install targets can potentially install the same files which
leads to errors on install when running make with -j > 1.
If build_all is set, make the 'install' dependent of the new target
'debug-release-install' which contains the commands of 'debug-install' and
'release-install'.
Of course, debug/release is not hard-coded, but the content of the BUILDS
variable is used.
Change-Id: I67b504a95b83daf43bc89dcc0e3391b67e19c027
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
They will be deprecated, so qmake wouldn't compile anymore.
Change-Id: I42212fdf213df696d736ed34458f7e79bd902dd5
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Use the writeDefaultVariables method also for the
Win32MakeFileGenerator. Remove the initializations that are already done
in Makefile::writeDefaultVariables.
Change-Id: I590cc5d7031de67dd830e6113849ab080dbf2325
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
As the non prefixed variants are deprecated
Change-Id: I2ba09d71b9cea5203b54297a3f2332e6d44fedcf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QRegExp includes can be found in several files where there's not even a
use of the class. This patch aims to avoid needless includes as well as
follow the "include only what you use" moto.
This patch removes a QRegExp include from the QStringList header which
means that there is likely going to be code breaking since QStringList
is used in many places and would get QRegExp in.
[ChangeLog][Potentially Source-Incompatible Changes] qstringlist.h no
longer includes qregexp.h.
Change-Id: I32847532f16e419d4cb735ddc11a26551127e923
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
It was already done correctly in the GCC generators, but lacked in MSVC.
Task-number: QTBUG-11117
Change-Id: I5e6c2e4802dbe33c0f15c46a227a08c3f0cc5707
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A macro name ending in R might expand to a string; if this precedes a
string constant, we're juxtaposing the strings. My first parser for
raw strings would mistake it for a raw string instead, ignoring the
part of the identifier before R. Re-worked the exploration of what
came before the string to catch these cases, too.
The backwards parsing would also allow any messy jumble of [RLUu8]* as
prefix for the string; but in fact R must (if present) be last in the
prefix and *it* can have at most one prefix, [LUu] or u8. Anything
else is an identifier that happens to precede the string. Reworked
the parsing to allow only one prefix and not treat R specially unless
it's immediately (modulo BSNL) before the string's open-quotes.
Add link to the cppreference page about string literals, on which the
grammar now parsed is based.
Added a test for the issue this addresses.
Verified that this fails on 5.6, dev and 5.9 without the fix.
Expanded the existing test to cover R-with-prefix cases.
Task-number: QTBUG-55633
Change-Id: I541486c2ec909cfb42050907c84bee83ead4a2f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The $${TARGET}_manifest.bak file was not removed on "nmake clean".
Task-number: QTBUG-59827
Change-Id: Ia5b636f4917f3e7a2df8d753824b72e63d278005
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QMAKE_LINK_OBJECT_MAX is actually a property of the host, not the
target.
this works around binutil's inability to use thin LTO objects in
conjunction with an MRI script
(https://sourceware.org/bugzilla/show_bug.cgi?id=21702).
Task-number: QTBUG-61335
Change-Id: I90a1334b9c905c433b35546e8f3f3b5089d2c65b
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Task-number: QTBUG-59301
Change-Id: I2562b862465a52ecc56f551bcdb98fa7279ebfcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
If these rules are not added to the solution, Visual Studio will
complain, that the project has to be deployed before it can be run.
Change-Id: I6d3fbc949c85b11a92f78e13e2f6a1b92a5cfdc7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If several Makefiles are used in the same directory (for example, for
multiple projects in the same directory or different build configurations),
they all reference the same object_script, which is obviously wrong.
Change-Id: I9b499ceb6b6bd6058f54b452fa44bfb2313eec26
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When generating a project, the directories can be specified as arguments
to the qmake call. As a result files can either be incorrectly added to
the project with a leading slash, or can end up duplicated. By passing
the absolute path with the file, it ensures that the file is added
correctly and no duplicates occur as a result.
Task-number: QTBUG-48342
Change-Id: If774de8d7f5cceca80042a25a3aa4e5b045249da
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This was already done on unix, but not for MinGW.
If the archive already exists, it is appended rather than replaced.
This can cause invalid references when whole-archive linking is used
and some object file that was already linked was deleted.
Change-Id: Ie265371f197d996d57002b248043736544ee641e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
adding shared install paths via QMAKE_LFLAGS in the spec has the tiny
side effect that they are searched _first_, which is generally a really
bad idea - they should be _last_.
for that purpose, introduce QMAKE_RPATHLINKDIR_POST, and migrate all
specs to use it.
QMAKE_RPATHDIR_POST is added for consistency, but not actually used.
Task-number: QTBUG-59457
Change-Id: Iac6cda5e9111ef8cca454a69861fe8408bb40589
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
adding shared install paths to QMAKE_{INCDIR,LIBDIR} in the spec has the
tiny side effect that they are searched _first_, which is generally a
really bad idea - they should be _last_.
for that purpose, make QMAKE_{INCDIR,LIBDIR}_POST live up to their names
(i.e., search them actually last) and migrate all affected specs to use
them.
Task-number: QTBUG-40825
Change-Id: Ie0de81c3cc49e193186d2fedd7d6c77590c8ef79
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Every /Zc:XXX option qmake doesn't know about yields a "WARNING: Could
not parse Compiler option '-Zc:XXX'; added to AdditionalOptions."
Put all /Zc:XXX options we don't handle into AdditionalOptions without
printing a warning. There's no point in making all options known to
qmake and updating them for every MSVC release.
Change-Id: I319e027791a7b0a29d139ee3074ab1aed8ce8a63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
As the directory installation command also works with files as a source
we can unify the external commands, resulting in simpler command lines.
Change-Id: I65013626eedbdb3ce1c77ed230d46edd1603b986
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The same as for other visual studio versions use "x86" as arch instead
of win32. arch is used to determine library paths and these use x86 and
not win32.
As compilerArch is not used in MSVC 2017 it can be removed.
Task-number: QTBUG-60530
Change-Id: I47157eb1d7ae9d913461210d34858ffb37c81586
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Similar to the two parent commits, this patchs preserves the time stamps
of files we install as a result of recursive directory copying.
Change-Id: Id5931a467196d5cd67acfa0deffc2488af8a3669
Task-number: QTBUG-59004
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The result of "make install" should be the same regardless of whether it
has been run multiple times and the destination exists already. This is
done by making the file installation calls always take canonical source
and target paths and not look at the target directory.
Task-number: QTBUG-60370
Change-Id: I83a584c0dbc4fd10c79976d4169bf6bc051884a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
As for the formatting code, de-duplicate the parsing code by only
parsing char*s, converting QChars to Latin-1 first in a small buffer.
The QUuid(const char*) ctor performed no length checking, relying
instead on the checks performed within _q_uuidFromHex(), which
includes an implicit check for premature end (because NUL is not
a valid token for the parser).
The (QString) and (QByteArray) ctors did perform length checking.
To the extent possible, this is removed, since it is handled by
_q_uuidFromHex(). Failure cases need not be optimized. Only the
QLatin1String overload needs to do some checking, because views in
general are not NUL-terminated. The QStringView overload can just
append a NUL when it converts to Latin-1.
The only check I added to _q_uuidFromHex() is that for src ==
nullptr. It would otherwise be duplicated in several callers.
While touching the internal functions, port to passing and returning
by value.
Saves 1.6KiB in text size on optimized GCC 6.1 Linux AMD64 builds,
even though we added new API.
Port some users to the new functions. Expand fromString() test.
[ChangeLog][QtCore][QUuid] Added fromString(QStringView/QLatin1String).
Change-Id: I519339419129550c86e0ea80514865cd6a768f5d
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The original commit only added support for GCC and Clang, but not ICC.
Amends 73331eeb
Change-Id: Id7638cf1b538edb1008fb3aa10754c1f517a994f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Similar to the parent commit, this patch adds a unified code path in
qmake itself for installing program files while preserving their
original last modification timestamp.
Change-Id: I7b7dcfa6228c2bfd48ea6036549398bb6f90032f
Task-number: QTBUG-59004
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On non-windows platforms, we use the "-p" parameter of install(1) to
preserve the last modification timestamps of files. On Windows the use
of copy does not preserve them. As a cross-platform solution, this patch
introduces a simple built-in install command in qmake to copy files.
Task-number: QTBUG-59004
Change-Id: I3064d29a2b8c7b009a1efbf8f00b84c079ea5417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
projects using a dynamic build are not supposed to access this variable
anyway.
Task-number: QTBUG-51598
Change-Id: I81b55ea9ba460b80919f40ed7fe3d52129636b9e
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Due to that uninitialized variable /DEBUG:FASTLINK ended up in vcxproj
files for VS < 2015. However, that option is supported by VS >= 2015
only.
Task-number: QTBUG-59630
Change-Id: I34d9eef1a3bf2262bac48962938afe84eb7de934
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Adding the /utf8 compiler flag resulted in undefining all preprocessor
symbols for VS project files, because the ingenious compiler option
parsing logic checked for a 'u' prefix, and "utf8" obviously matched.
The /utf8 flag is added to the additional options, because there doesn't
seem to be an XML tag for that.
Task-number: QTBUG-59431
Change-Id: I762fcdcf6caf0606b40633861e265df5edb4a9c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Adding both development team and provisioning profile to Xcode
switches off the automatic signing
Task-number: QTBUG-38782
Change-Id: Ic869e16490c11e369b6674c815e860cac66c5afa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Call sites of NmakeMakefileGenerator::writeResponseFileFiles expect that
the output is terminated with '\n'. Do not bail out if files is empty.
Task-number: QTBUG-59305
Change-Id: Id3fef8dbc506dad1868e6b352119f5f27b50a368
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Linking with too many object files could lead to "LNK1170: line in
command file contains 131071 or more characters". Do not write all .obj
files into one line but respect a limit of 1000 characters. If the limit
is reached the object files are separated by newlines instead of spaces.
Task-number: QTBUG-58710
Change-Id: Ibae1f737d6b614a9624b4e00cdd21d3722d341e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
in particular, -before (just for symmetry, as it's the default), -early
(the actual objective), and -late (for symmetry again).
Change-Id: I274303582a348b052c3e5106ff360ab4fd7d4ee2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This ensures at compile-time that Qt libraries do not use any APIs that
are not safe for use in application extensions, and fixes warning
messages that appear when linking to Qt libraries that are not built
with this flag, when used in an application extension.
This is especially important on watchOS where *all* "applications" are
actually application extensions, and on other Apple platforms if
application extensions are developed using Qt.
Task-number: QTBUG-40101
Change-Id: I022046f2584e0222253d33052b0abc221d7c93d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
prelink was not supported at all for ar.
postlink was done for most cases, but missing in one particular ar
invocation.
Task-number: QTBUG-57276
Change-Id: Ic72c42a9502c97d7111b3f3941b387024d46a27d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
These code paths have not needed to be exercised since Xcode < 3.2 was
dropped from support, which is beyond ancient at this point.
Incidentally, this removes use of a deprecated function.
Change-Id: I3e5a45794c21b434b31a48da8a8b0ff22f2852fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When generating the Visual Studio project XML, the filter "Root Files"
was not being output. Specifically, this means that even if RC_FILE was
specified, it would not be included properly as a resource compilation
target in the resultant Visual Studio project file.
This is essentially a rather belated cherry-pick of qt/d6de960b7f.
Task-number: QTBUG-57914
Change-Id: I7d03dc818df0cf36608012f1a71a3a476d8a9ff7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the arguments after '--' are by definition meant only for the top-level
project, as that's where configure is invoked from. passing them to
sub-projects just adds noise to the make output and misleads users.
note that this specifically does not support qmake -r, which will break
if the subprojects rely on the arguments being absent. this isn't a
problem, because the qt build doesn't support qmake -r anyway.
Change-Id: I7ecff6212ce3137526005fc324a4a7ae45e3345e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
now that configureapp does not use it any more, qmake is the only
remaining user. and the license headers already claimed that this code
is part of qmake ...
Change-Id: I9b8a16f8f2b432d2b1143efbdd1f0042305ccc0c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before VS 2013 ToolsVersion contained a .NET version
number (e.g. "4.0"). Since VS 2013 ToolsVersion is the same as the
Visual Studio version number (e.g. "12.0"), which is also the default.
We always wrote "4.0" (except in one special case which used
"14.0"). This doesn't bother Visual Studio itself, but other tools
like PVS-Studio.
Remove the ToolsVersion attribute from generated VS projects for VS
2013 and newer.
Task-number: QTBUG-57694
Change-Id: I7a3bc4534c492e9540f6b968bee8a969980df63f
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change dcd2f829 introduced fake files with the extension .cbt for custom
build tools that generate code from C++ source inputs. The moc_predefs.h
header file falls into this category, because it is generated from
dummy.cpp.
It turns out that these fake files have to exist. Otherwise the
custom build step is executed on every build. That means re-moccing all
mocables on every build.
Fix this by actually creating the fake .cbt files with some
explanatory comment in them.
Task-number: QTBUG-57695
Change-Id: I251294334425d9914677787d8ba6da1169b4cca5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This tag was never spelled "PlatformToolSet". The correct spelling
is "PlatformToolset" (lower case s). VS itself can load qmake-generated
projects despite this misspelling, but tools like PVS-Studio are
bothered by it.
Task-number: QTBUG-57435
Task-number: QTBUG-57694
Change-Id: Ib70e8561f1827e195194bcf518445b2909a8d8c0
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The phrase "which as been" lacked an h (albeit one silent in some
anglic dialects). The added letter made an already long line stick
out just a little more. Judicious rephrasing of the early part of its
sentence made reflow a way to fix that.
Change-Id: I29c2ac79d08a135dd4a16518f459872c8ecd1f24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
eliminating everying TARGET-related was a nice try, but in the real
world (e.g., qttranslations), extra compilers are activated by
PRE_TARGETDEPS, which of course doesn't work when TARGET is entirely
gone.
so instead, let it act as a phony target. this is consistent with the
unix generator.
supersedes 0810d48bc in amending af2847260.
Task-number: QTBUG-57423
Change-Id: I3d2ecc4ff42b37ffe5f71f5c20d17c06b31f4da2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
For QMAKE_EXTRA_COMPILERS with inputs that are "buildable" (e.g. C++
sources) the custom build step is added to the output file. From Visual
Studio's point of view this looks like a circular dependency (e.g.
foo.moc generates foo.moc). Usually this just prints a warning that can
be ignored. But this circular dependency also breaks dependencies
between custom build steps. This became noticeable when the generation of
moc_predefs.h was added. Generating moc_predefs.h must be done before
any moc custom build step is executed.
This patch fixes the issue by using fake files (output file plus suffix
".cbt" for "custom build tool") that act as dummy inputs for the custom
build tools.
Task-number: QTBUG-16904
Task-number: QTBUG-57196
Change-Id: I4711e44a0551046d215db151fa0312af8a9177a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
it's wrong to use the escape function for makefiles, as the command
goes directly to a popen() call.
Task-number: QTBUG-57343
Change-Id: I34a8e4d8fb406303c593e7c1e24019e0f756e7f8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The values of this hash are strings, not lists of strings.
Enforce this by using the proper type instead of just using a comment.
Change-Id: Id8a13acdceb8f9f8a9a8eaa04e790b1e6cd5faa7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
of course, we should stub out everything related to TARGET - only the
generic "all" and "first" targets including their deps should be
emitted.
amends af2847260.
Change-Id: I8ed7a550b8022c69328d2e16dbd078928d176964
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
actually pack the extra compilers' input files, not the variable names.
unlike on unix, we don't create an actual distdir, so the package is
still going to be rather broken.
Change-Id: If0a15bbe9db95aebd88c2a21ca3c0f787ce5c7e1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
that is, adjust path separators and don't quote them. we already did
that to some degree, but totally inconsistently, so it just didn't work
for any targets with "fancy" file names.
note that we don't bother doing that for recursive targets, as these are
assumed to be identifiers.
Change-Id: Ic75f003b71abc6fed03a4121b903ad5ee8253ed2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Replace which_dotnet_version with a simple function that converts the
value of MSVC_VER to its corresponding enum value in the VS project
generator.
This reduces the maintenance burden when adding support for a new VS
version, because we do not need to update the registry keys in
which_dotnet_version anymore.
The which_dotnet_version function implemented the following logic:
- find all installed VS versions via registry
- select the "best matching one"
- if there is no best match, select the VS that's in PATH
- create a project for that VS installation
The usefulness of this whole stunt is questionable as the VS version of
Qt's mkspec must match the version of a project using that Qt anyway.
Change-Id: I9fb9a099ee5ddb5fc4c450be4f68f41f2b406b9a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
On the way to get rid of this function.
Have one place to determine the VS version instead of calling
this function over and over again (even though all calls but
the first are cheap).
Change-Id: Ic42a65df5a9bbe289f4813e4db85000dba15e672
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Make qmake understand the /DEBUG:FASTLINK option in QMAKE_LFLAGS, and
write the corresponding value correctly to VS 2015 project files.
Task-number: QTBUG-55591
Change-Id: I670375ed1523a5ab96bb3cce28635785564edba8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Commit 3d3d65f5 separated the PDB files for compiling and linking. Only
the PDB file the linker produces would be installed. However, this does
not work for static libraries as the LIB tool does not create a PDB file
from the compiler's PDB file. This patch turns the separation between
PDB files off for static libraries.
Task-number: QTBUG-56594
Change-Id: I08dcb7889c67b2f6370efa1ee19be8558355bbc9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Following the discussion at QtCS 2016 about deprecated APIs,
let's enable the warnings by default.
Change-Id: I73fe63de3e4f755067100320d7497b6b227549b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Slims down QCFString and leaves only one implementation of converting
back and forth between CF/NS strings and QStrings.
Change-Id: I068568ffa25e6f4f6d6c99dcf47078b7a8e70e10
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
With the removal of Windows CE support(52623d6d) the logic of these
checks have changed, as it was always true for non Windows CE builds
before.
This did not affect WinRT, as those mkspecs define VCPROJ_ARCH
explicitly in their qmake.conf.
Task-number: QTBUG-55753
Change-Id: Ie2eddf197c17fcbf7343b444cfe8940a332a545c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This version now prefers non-free provisioning teams, since the latter
seem to be problematic in more cases.
Task-number: QTBUG-55915
Change-Id: Ie40ddae5e333acdd5327ed46992fb4fb300dee25
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
5971b88e is not needed in new configure.
This merge also reverts "fix QMAKE_DEFAULT_*DIRS resolution with
apple SDK", 2c9d15d7, because it breaks iOS build with new
configure system.
Conflicts:
mkspecs/features/default_pre.prf
mkspecs/features/mac/toolchain.prf
mkspecs/features/toolchain.prf
src/dbus/qdbusconnection.cpp
src/plugins/sqldrivers/mysql/qsql_mysql.cpp
src/sql/drivers/mysql/qsql_mysql.cpp
src/widgets/widgets/qmenubar.cpp
src/widgets/widgets/qmenubar_p.h
tools/configure/configureapp.cpp
tools/configure/environment.cpp
tools/configure/environment.h
Change-Id: I995533dd334211ebd25912db05b639d6f908aaec
Parsing the other files will (re)generate the same metaobject info in two places
Change-Id: I8984ed30751a7587de870f55dd427f067d1b2495
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The actual blocker for precompiled headers is not the iOS/tvOS/watchOS
platforms, but the way qmake handled multiple-architecture builds on
Apple platforms.
This patch allows multi-arch builds to be performed while using
precompiled headers.
Since df91ef3d6c55692a0236f67b6c6b134a3bf84098 (April 2009), Clang has
had support for PCH files in the driver, which allows to use the
-include flag to automatically translate to -include-pch. We can then
take advantage of the fact that the -include option is allowed to not
be separate from its argument, which lets us take advantage of -Xarch to
specify a per-architecture precompiled header file.
This is done through some magic in the qmake Makefile generator which
"multiplexes" the PCH creation rule across multiple architectures and
replaces a series of tokens with the proper precompiled header paths
and architecture flags at usage point.
Change-Id: I76c8dc9cda7e218869c2919f023d9b04f311c6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This makes the Xcode generator smarter so that it recognizes when
a QMAKE_BUNDLE_DATA entry is attempting to embed a framework,
dynamic library, or plugin into the application bundle, and
places it into the correct generated PBXCopyFilesBuildPhase.
Change-Id: I67ac1534a0521eecfc90537db6f9aca2bdbc96b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This fixes a bug where joined device and simulator builds would get
for example, QtCore_iphonesimulator as the CFBundleExecutable.
According to Apple:
"For frameworks, the value of this key is REQUIRED to be the same as
the framework name, minus the .framework extension."
This does not affect the ability to load a framework whose executable
name differs from the bundle name (as is the case for simulator builds),
as the application will be linked to the correct framework executable
at link time by specifying (for example) the linker flag:
-framework QtCore,_iphonesimulator
Change-Id: Ib7614670d0620e0235cd7e2606d42dd034a90c68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
the inherited arguments may contain the '--' argument, which turns
additional arguments into configure arguments. the simplest fix for
that is injecting additional arguments at the front, not at the end.
Change-Id: I7cc00a42f0148e5ccbbeda2ad59fa8c63749f02d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Plugin bundles are not frameworks, so this fixes the case where a lib
template with plugin and lib_bundle in the CONFIG would be mistaken
for a framework bundle, which has a different filesystem layout and
handling.
Change-Id: I9ce9daf22d4e3de70bfe7bc8bb219068de0bca42
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is a prerequisite for properly constructed framework bundles.
On certain Apple platforms (iOS, tvOS, watchOS), bundles are used
in "shallow" format, meaning that the directory structures are
flattened compared to the one used in macOS bundles.
shallow_bundle allows the difference to be expressed independently
of the platform. Note that the term "shallow bundle" is used by
Apple in Xcode internals.
Change-Id: I1189c52b0ea66843c313783176c11cc2af97ad25
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
MakefileGenerater::Compiler is larger than a void*, so holding
it in QList is horribly inefficient.
Fix by using QVector instead.
Change-Id: I9ea173271caf9b4995d311c3864c6967da049380
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's empty, but non-trivial, thus preventing move special member
functions from being generated by the compiler (now that qmake
is compiled as C++11, too).
The default ctor was also empty - removed, too.
Change-Id: I714db524f681f1fc250d21926245757e97351e87
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Has a few too many fields for defining a member-swap
(which would be required to mark it shared).
Change-Id: Iecbeec9e60a9884cb4a984c58cb192918cef799d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's empty, but non-trivial, thus preventing move special member
functions from being generated by the compiler (now that qmake
is compiled as C++11, too).
Change-Id: I7e4b6d7f604020dd5e6da81f7a046202c8b78e09
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's empty, but non-trivial, thus preventing move special member
functions from being generated by the compiler (now that qmake
is compiled as C++11, too).
Change-Id: I9431311d24da802f147ce10e475936838bb85d41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It doesn't save any memory, generates worse code, and
prevents a member-swap from being added.
Change-Id: Iddc0f1338478e465f34076857e266f1912fbaba6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Visual Studio automatically defines _WINDLL when building a DLL,
regardless of project settings
(https://msdn.microsoft.com/en-us/library/8x480de8.aspx). This define
is therefore widely used to detect DLL vs. static library or executable
build target on Windows.
For makefiles, _WINDLL need to be manually defined, which QMake failed
to do so far.
Task-number: QTBUG-55183
Change-Id: Ic62201666c44e730e6881706d568ce9eaf22b7a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This was only used to specify XP as a target which is
not supported on 5.8 anymore. Clean up all associated
special handling in the mkspecs and pro files.
This effectively reverts change 10a0ac75.
Change-Id: I420d73002912989f1a5be961a2d09277ec4a4425
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
A bug in the Windows C Runtime causes text mode pipes to drop newlines
sometimes. This bug was hidden because of another bug in rcc which
caused newlines to be redundantly duplicated. When the latter bug was
fixed (commit 53d5811b) the former bug was exposed, causing invalid
vcxproj files to be generated. The Windows bug is described here:
https://connect.microsoft.com/VisualStudio/feedback/details/1902345
The workaround is to avoid text mode, and do the conversion of "\r\n"
to "\n" ourselves (which we were already doing anyway).
Change-Id: I792599a4cd7822f109fa921f02207fb1b144b1d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This resolves an issue where qmake would generate a Makefile with an
install command immediately followed by a test command, with no
intermediary newline and tab to separate them.
Task-number: QTBUG-54035
Change-Id: I7f9226f25e92b49ce689d252e9c4a58b877f2972
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The two PDB files that the MSVC compiler and linker create are supposed
to be handled differently and should not share the same file path.
Using the same file path for both can result in corrupted PDB files and
longer build times.
Use $${TARGET}.vc.pdb in the OBJECTS_DIR for the compiler and
$${TARGET}.pdb (the default) for the linker.
Task-number: QTBUG-53895
Change-Id: I31f06d4a674a3aa2afe5b30499bae820e5caf2c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this introduces an ambiguity, so some char* arguments need explicit
QString construction now.
Change-Id: Ic3919a1fa9419bbb3b57dd1aa7eb95643ee59e53
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
While previous SDKs used the form "CE_SDK (CE_ARCH)" in their
configuration/platform names, this is not true fo the Toradex SDK.
Inside Visual Studio the platform is only called "Toradex_CE800"
instead of "Toradex_CE800 (ARMV7)".
In order not to break other SDKs CE_PLATFORMNAME is introduced and
used in the wince80colibri-armv7-msvc2012 mkspec. If the variable
is set qmake uses it as the platform name in its vcproj generator.
Change-Id: Icb501bf6446a9f617745a0d2c7a80b240680b043
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Port the last four remaining Q_FOREACH users in qmake
and uic to C++11 range-for and mark all qtbase tools
(incl. qmake) as Q_FOREACH-free, using QT_NO_FOREACH.
Change-Id: Ief4e5877269e7a853e4cf05e58861a448e822d3d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
- QMAKE_FILE_IN_EXT as an alias for QMAKE_FILE_EXT, for consistency with
QMAKE_FILE_IN_BASE
- QMAKE_FILE_IN_NAME to make pairing _EXT/_BASE to get a full name
unnecessary (finally ...), and make use of it
- QMAKE_FILE_OUT_PATH, because i'll need it
Change-Id: I3d91ddb84f9cce52a665d562da11d165c92550c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it's beyond me why they shouldn't be.
Change-Id: I2493469636e4f196bfeb2eb00a691aeae0f1881d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
CID 155005: Possible illegal access in string. Some loops were
reading the buffer without checking the bounds.
Change-Id: I910671a6d56808138ec2bb5d96bd7edf78b20f73
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
CID 21629: The QMakeProject::read result was ignored.
MetaMakefileGenerator::createMakefileGenerator will be called if the
project was read.
Change-Id: I9187c82efd1abedcaa8e394f1fdb0b7f35a2b1d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Xcode does not recognize "<Group>" with a capital G, only "<group>" with
a lowercase g. As a result, paths of files within these groups are
calculated incorrectly. For example, dragging any external file into the
Xcode project would result in its leading slash being removed (while
still treated as an absolute path - broken reference). Furthermore, the
dropdown in Xcode displayed the Group location as an invalid string
instead of the correct "Relative to Group". This patch restores correct
behavior.
This fixes a regression introduced in
f09ec09c208c75a16abe05b6bb505a1fc58775a6.
Task-number: QTBUG-52701
Change-Id: I9af5360049a79e7958301e4090a9a542bab0af8c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This fix repairs the mechanism to deploy Qt dlls as well as C++ runtime
to a wince target in Visual Studio.
Do this by adding a deploy section in the Visual Studio solution and
adding the C++ runtime from the mkspec to the files deployed to the target.
Deploy target path is set to what the wizard of Visual Studio defaults to.
Before, the c++ runtime was only deployed for executables which were built
as part of Qt.
Task-number: QTBUG-50924
Change-Id: I478010dc16e35c68578281895aa3ae14b5c96bb4
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
we can rely on the super class to get it right.
as a "side effect", we won't try to install .pdb files for aux projects
anymore - the duplicated conditional was incomplete.
Change-Id: I9b66f32ab50ed2a1d4e6e03a9d205686a4b4a981
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
The platform has been removed in Qt 5.7.
Change-Id: Ie768b5ffbe60270c27b4a670dcf580ea361cb361
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
evidently, nothing and nobody sets this option, as it's been completely
broken since 6234dec41f (qt 5.5) and apparently nobody noticed.
Change-Id: I5a82ebd963a292af4689397875dde096f63d751a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
They prevent move special member functions from
being synthesized by the compiler.
Change-Id: I90c4a6e286734ef3906ee833826bd3bfbdad3874
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Java-style iterators are slower than STL-style ones, so
they should not be used in library code.
Replaced them with C++11 range-for, STL iterators or, in
one case, qDeleteAll().
In one case, avoid a double hash lookup by using erase(it)
instead of remove(it.key()), which we can now do without
detaching, due to the new erase() taking const_iterator.
Change-Id: I96174657fed70f76120b2c9d8190b4e70d5d8179
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
In VcprojGenerator::collectDependencies(), a temporary QLinkedList
is created, then iterated over. There's no reason to use a node-
based container here: no references are taken, no erases happen,
esp. not in the middle...
Port to QVector instead and reserve it, since the maximum size is
known ahead of time, and the lifetime of the container is very
short.
Since the loop iterating over the linked list needed touching
anyway, port directly to C++11 range-for.
Change-Id: Ic5dfeebcd9da37c214f54abc6025a0a2b8fa3b5d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
(or trivially marked const) ... by replacing them
with C++11 range-for loops.
Change-Id: I1522e220a57ecb1c5ee0d4281233b3c3931a2ff8
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
To avoid detaches of these mutable Qt containers,
wrap the container in qAsConst().
Change-Id: If086bea06fe26232a7bb99fad8b09fce4dc74c27
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
This is the simplest of the patch series: Q_FOREACH took a
copy, so we do, too. Except we don't, since we're just
catching the return value that comes out of the function
(RVO). We can't feed the rvalues into range-for, because
they are non-const and would thus detach.
Change-Id: I5834620bf82f3442da7b2838363d351a0fb960a0
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
The functions QMakeProject::values(), QMakeMetaInfo::values()
and QHashIterator::value() all return by const-reference,
so they can be passed to range-for without further changes.
Change-Id: Ic3b39ed8ff8cd7a6f287f1aa9d61a1acd67d7aaa
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... iterate over the container itself instead. Avoids
temporary QList creation as well as the lookup cost
when actually calling value(key).
Change-Id: Icac867c30e63863cfa44a382eedd4d6df2070a59
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QFileInfo::exists(f) is somewhat faster than the version which creates an temporary object.
Change-Id: I5f931a86d9dfad57d99efe04ca115422de43def9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When building QNX on MS-Windows, make magically adds the Msys root as
prefix to variables whose values look like paths; this applies to both
environment variables and variables given values on the command-line.
When we don't actually want to install under the Msys root, this is
unwelcome "help". So (for MinGW's make) support a magic prefix of our
own, @msyshack@, that'll make a path value for INSTALL_ROOT not look
like a path to make; we can then strip it off when we come to use it.
Change-Id: I951ad3c8fe3e5cfb49e6e361d7fff779f3a9d716
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Having a precompiled header file without file extension (or without
common file extension) led to an incorrectly generated Visual
Studio project file. The custom build step for automatically
generating the corresponding source file was missing.
Remove the file extension check that apparently was yet another
feeble attempt of runtime optimization.
Task-number: QTBUG-50442
Change-Id: I0552f94be12cbb70e2f32c242c7364699979bd81
Reviewed-by: Karsten Heimrich <karsten.heimrich@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Previously the hardware and camera button handler were guarded inside a
Q_OS_WINPHONE which does not apply to Windows 10.
Instead use WINAPI_PARTITION_FAMILY like on other places, this covers
Windows Phone 8.1 as well as Windows 10.
To find windows.phone.ui.input.h at build time the Mobile Extension
directory needs to be added to the include paths inside qmake. On
runtime we need to check whether we have hardware buttons or not. In
case they exist, register the handlers, otherwise skip registration.
Skipping also helps to keep WACK succeeding.
Task-number: QTBUG-50427
Change-Id: Ibeae15dbde12553cebd2b73b1a40b754c014f426
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
... instead of using erase in a loop, with quadratic complexity.
Change-Id: I4ac03ac0e893fc5dbb5e45131fcbfe82f1564bee
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
the primary purpose is making env var prepend mode work for unset
variables on windows. this is achieved by using a conditional and delayed
variable expansion. however, the latter is disabled by default and can
be locally enabled only in batch files. therefore, write wrapper scripts
and substitute them for the actual commands. we do this also on unix,
both for consistency and simply because the commands look much less
confusing.
this change is slightly backwards-incompatible, as invoking
qtAddToolEnv() multiple times on the same command will now make a total
mess. also, invoking it on a command that contains 'make' macro
expansions isn't a good idea, so testcase.prf needed an adjustment. the
function is an undocumented internal, so Nobody Should Care (TM).
this also reverts 80ebedecf9, as it's obsolete now.
Change-Id: I8394b77868b495abcf27b688996ca74c40b80994
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
In 50bf54c invoking windeployqt was only required in release mode as
MDILXapCompile was not invoked for debug builds with Visual Studio 2013.
However, Visual Studio 2015 invokes MDILXapCompile for debug and
release. Hence we have to use this workaround unconditionally.
Also we cannot limit this to msvc2015 host specs only, as older projects
still might be loaded with Visual Studio 2015 causing the build to
break.
Task-number: QTBUG-49815
Change-Id: Ia120a392967319b945a9746ad489f2db0eed7156
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
As for the #include-parser, the moc-detector's minimal C preprocessor
could be confused by a raw string into ignoring large chunks of code.
Change-Id: Id688e9a1f04628ce75a51a7d15269078c734288e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If a / wasn't part of a comment-start, it and the character after it
were none the less stepped over. If the character after started an
enclosure, this would duly be missed, leading to mis-parsing of the
subsequent text. As for similar bug recently fixed in findDeps().
Change-Id: Ie5329ec633c23a554b42a6351723c980e27fb9a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The C preprocessor allows backslash-newline anywhere and allows
comments anywhere it allows space. Testing wilfully perverse
applications of that revealed qmake's parsing of #include directives
wasn't very robust. So rework to actually follow the rules and add
those tests.
Change-Id: If5cc7bfb65f9994e9ab9ed216dd1ee7285c63934
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The parser in QMakeSourceFileInfo::findDeps() would step over the
closing quote of a string, only to have a for loop then step over the
character just after that closing quote, which was thus never studied;
this could lead to problems in various ways. Fixed that and expanded
findDeps() test to catch regressions.
Task-number: QTBUG-17533
Change-Id: I7dec5222e38fa188495b39376ffee70bc7bbc87f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Can't sensibly test unless the compiler does support raw strings,
since any test that would catch qmake's (prior) inability to parse raw
strings would necessarily confuse the C++ compiler in the same way.
This even applies (in test app code) to any #if-ery around the raw
string, since tokenization happens before preprocessor directives are
resolved. So the #if-ery on Q_COMPILER_RAW_STRINGS has to be in
tst_qmake.cpp, not the test app it builds.
Change-Id: I4a461f515adff288b54fb273fd9996f9b906d11c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The Visual Studio registry keys are stored in the 32 bit view.
Extend qt_readRegistryKey with an option that enables the caller to
choose the 32 bit or 64 bit registry view.
We now read the Visual Studio registry keys from the 32 bit registry
view even in a 64 bit build.
Adding the next Visual Studio version will become a bit easier.
Change-Id: I7300b992be6058f30a422e3f1fe0bafade6eea54
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
For some reason, the solution generator was looking for the vcproj
files in the source tree. It should look for them in the output tree
instead (suggested by Joerg Bornemann). This should handle both
in-source and out-of-source builds, and the special-case code for
handling out-of-source builds (which had a bug) can be removed.
Task-number: QTBUG-49665
Change-Id: I40b5c5907c52ffb074ccb8f297bb5924eacc1cb0
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
We need to remember where the included file's name starts anyway; if
we move this to before the search for the end, we don't need a
separate variable to keep track of its length.
Change-Id: Ia8d72839ac3fa32f2e748a21ee70dcab614562f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When looking for the keyword in a preprocessor directive, we were
checking for non-word characters to find its end. If that check
failed (i.e. we had a word character) we would then check for EOL
(which necessarily failed, on a word character). That made no sense.
However, we genuinely have no interest in a directive with nothing
after the keyword, so do check for EOL after the loop (once we've
skipped spaces after the keyword).
The loop itself was made needlessly complicated by, on finding the end
of the keyword, skipping over later space inside the loop. Moved this
outside the loop.
Change-Id: Iccc2d445bf44deb75604e7fa60f2464e7397d8ed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The C preprocessor does believe in a # [nothing] line; and we may as
well give up before checking for keywords if we've run out of buffer.
Change-Id: I64dc3ad2808435389d0d7b56dcbc9d92ae72aa6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
A loop to skip space and comments was meant to break on anything else
but would have not broken on a division operator (where it should) due
to it getting caught in the check for a comment-start, without falling
back suitably when it didn't complete that check.
Managed to contrive a suitably twisted change to findDeps test to
reveal the bug; broken previously, now fixed. Not ideal, as it relied
on another bug to fail previously - backslash-newline shouldn't end a
preprocessing directive line - but it should still pass once that's
fixed, too. Exercising a bug in qmake usually involves code that
won't compile anyway, making it tricky to write a test that reveals
the bug but that passes once it's fixed.
Change-Id: I08a1d7cc5e3d7fd1ac0a48e5c09dfdfbb7580b11
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Principally *(buffer + expr) -> buffer[expr] changes, with some hspace
normalization on affected lines. Made some empty loops more visible.
Pulled out a repeated character class test as a function.
Change-Id: I03d1b633550ad1814fa383d69ea04138dd0f82cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
No-one is known to use it - we don't even have a test for it. It
plays poorly with the real preprocessor and it has not produced any
output since at least Qt 4.0 (unless qmake is invoked with at least
one -d flag, drowning the output in level 1 debug output).
This incidentally means no preprocessor directive we care about has an
underscore in its keyword.
Task-number: QTBUG-49487
Change-Id: I123a945c1dfe29d1d3ceee1129cfedc043f2e7d4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Only VcprojGenerator over-rode it; and did so with a replacement
identical to the one on the base, so there was no point to it.
Change-Id: I5b899372247809c82b1cae25817e06c5849cd10d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The Xcode generator iterates trought all libraries and replaces
their suffix (e.g "_debug") with a placeholder that lets Xcode
switch between different library versions depending on the target.
The current way we do this fails when the name of a library happens
to contain the string "_debug" (e.g "qmldbg_debugger"). Since we
replace every occurrence of suffix in the path, we end up
replacing that part as well. The result will be linking errors.
This patch ensures that we only replace the last occurrence of the
suffix in the file path.
Task-number: QTBUG-48961
Change-Id: I9fafbe0ea0ad8b9cfd13448d6b28801106e645ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Commit 4bb004de94 broke the linker
options in generated Visual Studio projects.
We need to call fixLibFlags on QMAKE_LIBS and QMAKE_LIBS_PRIVATE.
Task-number: QTBUG-48936
Change-Id: I2f12bf0117d27104cd34f2f43fdeb7b948fa375e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
... and make use of it in qt.prf.
[ChangeLog][qmake][Unix] Added support for relative paths in
QMAKE_RPATHDIR.
Note that this technically breaks backwards compatibility, as relative
paths were previously silently resolved against $$_PRO_FILE_PWD_. This
was not documented and seems rather useless, so i'm not worried.
Change-Id: I855042a8962ab34ad4617899a5b9825af0087f8a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the library inside a bundle doesn't have an extension.
this doesn't really fix anything except suppressing the error message,
as we discard the result of the operation anyway.
Change-Id: Idfe3d1714dedb59d9d3e86a65f074e516c431389
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
at least the mingw version we use now interprets the sequence \# as a
literal hashmark, which completely defeats the previous hack.
the new hack escapes the backslash with another backslash, which appears
to work. however, make does *not* remove the additional backslash, so
the result is a bit ugly.
Change-Id: I591a2be443880b162094d04e5a5e624216b59311
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Suffix rules are the old-fashioned way of defining implicit rules for make.
We don't need them as we generate explicit rules for all sources we build.
[ChangeLog][qmake] Makefile output no longer contains implicit
suffix rules, as all sources are built using explicit rules.
Change-Id: I4ecfa5b80c8ae33aea8730836f3baf99dd4951dd
Task-number: QTBUG-30813
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
as a side effect, this makes the extensions used for searching libraries
configurable under windows (QMAKE_LIB_EXTENSIONS).
Change-Id: I3e64304fcadbfe74d601b50a70a73180c894503e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
first, store the library's full name in the .prl file, like we do on
unix. this is not expected to have any side effects, as QMAKE_PRL_TARGET
was entirely unused under windows so far.
then, rewrite the mingw library handling: instead of letting the linker
resolve the actual libraries, do it ourselves like we do for msvc. we
could not do that before due to the partial file names in the .prl
files: if the library didn't exist at qmake execution time, we'd have to
guess the file extension (the msvc generators never had that problem, as
they know about only one possible extension for libraries anyway).
make use of processPrlFile()'s ability to replace the reference to
the .prl file with the actual library. that way we don't need to
re-assemble the file name from pieces, which was fragile and
inefficient.
QMAKE_*_VERSION_OVERRIDE does not affect libraries coming with .prl
files any more. additionally, it is now used literally (not
numerically), and values less or equal to zero lost their special
meaning as "none" - this isn't a problem, because that's the default
anyway, and there is no need to override bogus versions from .prl files
any more.
no changelog for that, as i found no public traces of that feature
outside qtbase.
[ChangeLog][qmake][Windows] Libraries coming with .prl files can now
have non-standard file extensions and a major version of zero.
[ChangeLog][qmake][Windows][Important Behavior Changes] The .prl files
written by earlier versions of Qt cannot be used any more. This will
affect you if you depend on 3rd party libraries which come with .prl
files. Patch up QMAKE_PRL_TARGET to contain the complete file name of
the library, and replace any /LIBPATH: in QMAKE_PRL_LIBS with -L.
(the part about /LIBPATH: actually refers to the next commit.)
Change-Id: I07399341bff0609cb6db9660cbc62b141fb2ad96
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
don't look up the files and normalize the paths multiple times, as this
is inefficient and hard to understand.
on the way, processPrlFile() got unnested, and libExists() got nuked.
note that a missing QMAKE_PRL_TARGET will be now complained about, which
really should never happen.
Change-Id: Ibcd77a7f963204c013548496ecd2d635e1a4baba
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
don't prepend the normalized path to the target name, but replace only
the filename in the original string. this ensures that any variables in
the path are preserved.
Change-Id: I58c2b54b7114bfdbf659e6a6ce3e02c2611900d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the dependency doesn't seem to make any sense.
while the deduplication is a bit naive and thus dangerous, it was
already enabled by default anyway by virtue of link_prl being enabled by
default, so this amounts to a non-change for by far most projects.
use no_lflags_merge to disable it.
Change-Id: Ia441931ddbc41ed617aee21e6fe8821e3448d2bc
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
seems pointless to tear apart the functions, on the way duplicating some
boilerplate.
Change-Id: Ide3697ca1c931e8de607ac48c21cecce4781fe13
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this feature was added with a dubious commit message a decade ago, was
undocumented, and there are no public traces of it being used.
if i had to guess what it was meant for: to be able to consistently use
-lfoo throughout a project and centrally (e.g., in .qmake.cache) choose
to use foo<bar> (bar possibly being "d") instead. however, more explicit
methods are being used instead, including in qt itself.
Change-Id: Ic3a98dc3aec59876f26909fbf9f7aba32baa05bf
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
"why not use libtool?" -- sam
"srsly dude?!" -- ossi
[ChangeLog][qmake] Support for CONFIG+=compile_libtool was removed. Use
CONFIG+=create_libtool and/or custom compilers instead.
in addition to its utter insanity and superfluousness, this feature was
apparently quite broken anyway (QTBUG-35745).
Change-Id: I8147a2953f5f065735ae3a2206cd5d33a7c1809a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
