Sometimes useful to force e.g. an exact match.
Change-Id: Ic417a518d91b579c23dea925f747955f11d4143b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Normally done through the webform, but this option is useful for
scripted running of such tests.
Also option to disable such updating alltogether, to allow runs
that will never modify the baseline suite.
Change-Id: I71cc7564453e63bda7ded2b90be01280c9dbb95a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Initialize the device earlier and enable the screen as well.
These changes are also compatible with the RCar H3.
Change-Id: I4a83dedc0eed9df181c32e60ebf3666824d2a6c6
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
We began using abort() on 25d6f312ac
(5.8), which improved since we stopped using exit() with MSVC. However,
abort() with MinGW and on debug-mode MSVC's CRT calls _exit(), which
attempts to cleanly unload the DLLs, which in turn may run global
destructors.
[ChangeLog][QtCore][Important behavior changes] qFatal() no longer uses
std::abort() on Windows, as there are circumstances where global
destructors are still run after that call, leading to possible
deadlocks.
Task-number: QTBUG-34460
Change-Id: I2bec439d0e9841f58c7ffffd152200e45f1df982
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
If the pipe creation fails, we need to properly close the pipes that
were successfully created, emit the signal indicating failure and set
the state back to NotRunning.
The error string is reused from below, so there's no new translatable
string.
Task-number: QTBUG-67744
Change-Id: If90a92b041d3442fa0a4fffd1526207698f234a6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Avoids using an intermediate buffer on store and simplifies the code.
Change-Id: I2dc4e735eb770f90dc99fe0f513b4df3b35ee793
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This fixes their issue #41, a potential undefined behavior.
We preserve the locally added "__ghs" clause as well as the _M_ARM_FP
clause necessary for winrt in utils.h.
[ChangeLog][Third-Party Code] double-conversion got updated to upstream
version 3.0.0.
Task-number: QTBUG-66561
Change-Id: Id79125bdeeaebb61dca2e2885d3370accce9030c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In case the user has explicitly selected a value for the
duplex mode in the print dialog before, select this one when
another printer is selected and the newly selected printer
supports it.
Otherwise, always set to the default value of the respective
device that was selected.
This way, default values that the user (or admin) has set for
a CUPS printer (or printer instance) are honored, but an explicit
user choice made in the dialog takes precedence.
Previously, the duplex values was always reset to "None"
every time the printer was changed.
Change-Id: Id9683a05b10cf7a4b842f8b6c8452e80cdc6ff91
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When the page size was not valid on the new printer, it would end up
having the wrong page size name on the new printer. What should happen
in this case is that it should set the originally set page size as a
custom page size on the printer instead.
Task-number: QTBUG-62221
Change-Id: Iaca34ae262f5d0685ca60e4ca4b38229a2283289
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
So that Qt responds correctly when window managers make geometry
changes.
Note: Older versions of screen, such as the screen from the QNX 6.6.0
4036 patch, don't produce SIZE/POSITION property events.
Change-Id: I7e1e5982a2cbd3f57d468b43869af8558c6d50e7
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Retrieving it via some other screen object can be painful especially
when there isn't a readily available screen object to use.
Change-Id: If13e808435ea6f2909d5b4c3c5c736950e00aa5a
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Without it, the clear runs asynchronously and screen may clear
pixels _after_ Qt updates them.
Change-Id: I0c0844676d8a4387439a2f818ee08942ccaf6b08
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
We've reverted to using the default timer-based request-update mechanism
for now, so the code in [QNSView updateRegion:] needs to ensure it's only
triggering a deferred needsDisplay if requestUpdate was done via the
(now disabled) [QNSview requestUpdate], which uses setNeedsDisplay.
Task-number: QTBUG-68048
Task-number: QTBUG-68047
Change-Id: I0421a32773908daa0f1be0075f4f2d25c90c8aea
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch removes a bad hack for Unity issue described in QTBUG-67757.
The workaround from 243a0660e1 caused
even more problems, see QTBUG-63542.
Besides causing more problems, the usage of this hack was inconsistent.
The goal was to get stable geometry before continuing further in the test
function. The same logic should have been used in qWaitForWindowExposed().
It was never documented that only qWaitForWindowActive() has this tweak.
Also this hack was needed only for Unity, instead being unconditionally
executed for all platforms.
Task-number: QTBUG-67757
Change-Id: I7b7fb4b09151c4ab4807282006d7f956b18f60ad
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Modifier keys are saved in qinputdevicemanager such way that both evdev
and libinput can use it the same way, it is also handling the repeating
modifier key events. Evdev support is important for VxWorks support
because it is using it.
Task-number: QTBUG-60694
Change-Id: I49038cb7fe2ad5134b3a37167c19953867ea31c3
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
- Add a display label showing the screen parameters.
- Add a menu option to launch secondary windows and restructure
the code accordingly
Change-Id: I2bdb76da0b0a00e62db41e674aa93cef9598fe67
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Add the missing documentation.
Change-Id: I5bc7fb191a7c073ed0d9e17e682d8ac808c10e96
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This solves huge UI on some (most ?) HD 13 inches that have
a calculated scale factor around 1.75.
Task-number: QTBUG-53022 QTBUG-57211
Change-Id: I6cc22d3e47d38cb1d5a0daf5646a936256664e48
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The reason it crashed was this:
1. Button was pressed => _panTimer started with the graphics view as
destination.
2. Button was released => the graphicsview is destroyed
3. 300 ms later: Qt tries to deliver TimerEvent from _panTimer to the
graphics view. Unfortunately, the graphics view is deleted, but Qt
doesn't know that... (*crash*)
We therefore chose to start the timer with a destination we are controlling the
lifetime of: the QMacPanGestureRecognizer. Inside the timerEvent of that we can
check if the actual target is already destroyed.
Task-number: QTBUG-60404
Change-Id: Iff8f5b7217de42c4c5cf551ca507f0cff1c99a78
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Move declaration of pick/perp helpers up the dependency chain
Change-Id: I7084ed829a057a0c45d60445c416fb07f2cb5624
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
paintEventCount() is currently flaky on macOS. It gets extra paint events after
qWaitForWindowExposed() returns, which causes the following assertions to fail.
Add the wait that was removed in 0cb940b1d3 back
to fix those failures.
Task-number: QTBUG-68032
Change-Id: I68e0b6008de40922ec740291dfdd1842e0f62f89
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
This warning was removed when we refactored QCocoaMenuItem::sync().
This change amends 8412009de6.
Task-number: QTBUG-68013
Change-Id: I0d65109dff5f82db530b6bdced96c05692af6b4b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Replace the code for isRowSelected and isColumnSelected with
a much simpler algorithm for deciding if a row/column is selected.
In a model with a cross-hatch of unselectable indexes, the return values
of is(Column/Row)Selected would depend on the order in which the
selections were done.
Task-number: QTBUG-18001
Change-Id: I6aa4b1df7c07fae469a686041927fa8c42bc9b16
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Previously the code for isColumnSelected and isRowSelected differed
slightly, in how unselectable indexes would be treated.
This made isColumnSelected return false for a column, which mixed
unselectable indexes and selected indexes. Thus in some situations,
the user could not deselect a column via a QTableView header.
By copying the isRowSelected code to isColumnSelected, rows and
columns behave identical.
Task-number: QTBUG-18001
Change-Id: I6ca85ac64b31a481fafeaa3bec958b18283eed8d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Home/End don't actually work on macOS. The "select all and delete" key
was not actually testing anything at all.
Change-Id: I44d3e9dd27da418afd699bf8720d5369325d20df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Introduce C++11, nullptr, for, port to Qt 5 connection syntax.
Change-Id: I2d233ccd68bad533af8d4674d91236b2c049e997
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Having rows without fields is a supported use case so it shouldn't
assert. Code works quite well in release mode, but crashes in debug
mode.
Change-Id: I1c4f736318489bae09780fcdb56136181afcac17
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
... but only if the host it came from is an EXACT match. Also only apply
the cookie if the url is an EXACT match.
[ChangeLog][QtNetwork][QNetworkCookieJar] Cookies will no longer be
rejected when the domain matches a TLD. However (to avoid problems
with TLDs), such cookies are only accepted, or sent, when the host name
matches exactly.
Task-number: QTBUG-52040
Change-Id: Ic2ebd9211c48891beb669032591234b57713c31d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Checking for Q_OS_LINUX, Q_PROCESSOR_ARM and use of QT_CONFIG() checks should
only happen after qglobal.h is included. Otherwise the header will be broken if
included before something that uses qglobal.h
Change-Id: I052e46784f7b174e74e8894e1b7c5b7528420f5d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In bootstrapped mode QDBusMessage isn't available, so looking up the type
via QMetaType wont work. QDBusMetaTypeId has this special-cased, but that
alone isn't enough for qdbuscpp2xml to produce the same result as in non-
bootstrapped mode.
The effect of this has also been described here before in detail:
http://lists.qt-project.org/pipermail/development/2017-February/028756.html
Change-Id: Id309a3a910f971c6150cdc6d06f2b48f1b95c787
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The class is not thread safe, so one instance is not enough for whole
application. Mention that QNetworkAccessManager instance can only be
used from the thread it belongs to because it is a QObject.
Change-Id: I56184e4f8fbd36aca3f6677310431eab88346e6e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If the input method event contains a commit text that ends with a
newline, text, the commit string is inserted first. This changes the
current block.
This change makes sure that we apply the formatting changes (including
removing the old preedit text) to the old block in this specific case.
Task-number: QTBUG-67836
Change-Id: Ia83963780fb14b3c571dbbe3eb81fbbe20fbf412
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
As per today's change in the MIME spec.
https://bugs.freedesktop.org/show_bug.cgi?id=97372
Change-Id: Iba4fdd95c3ebec8a042404956db3466a46c97f1d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
checkReason_ActiveWindow() started failing on Windows when run together with
other tests, but still passed on its own.
The offending tests was checkReason_focusWidget(), which showed a window but did
not wait for it to be active.
After adding this wait the whole test executable passes on Windows as well.
Amends fd87c8da82.
Change-Id: I384bc45176fcd7bf6f491a4f39b46464ba45693b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add qmake feature and configure option, which optimze the size of static
exectuable. Use for static build.
Enabled via configure --gc-binaries, or CONFIG += gc-binaries in 3rd party
projects.
Change-Id: I3c25b02caaef6a4afc6019afc9c67122dd11696d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We need to make sure we don't emit CMake declarations for private
headers if those headers are absent. However, most of the time we have
private headers and should add them.
Task-number: QTBUG-37417
Change-Id: I639eb93d008de27928dedac540894af70c1883b9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This way the platform window is destroyed in a timely manner, preventing
redundant close events from the window system.
Task-number: QTBUG-43344
Change-Id: Ifdfca59ceacef54405f1c227c493dc514a1b27ea
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Instead of a local wrapper for it.
Change-Id: I0708dfad44b3db0c7a13e75ba5b4193ab50ac315
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Scale pixmap size by the viewport devicePixelRatio,
and make sure scrolling deltas and expose regions
are correctly scaled.
Change-Id: Ibeac34c5ecd531ca7c09802f0b5e1f45b8e31b65
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
GCC with LTO sees through our hack:
qprintdialog_unix.cpp:212:7: warning: type ‘struct QPrintDialogPrivate’ violates the C++ One Definition Rule [-Wodr]
qabstractprintdialog.cpp:49:7: note: a different type is defined in another translation unit
This hack was there so that the QPrintDialog functions in
qabstractprintdialog.cpp could use the d pointer. So instead of hacking
around the issue, just use the class that this file has access to:
QAbstractPrintDialogPrivate.
Change-Id: I3840d727dee443318644fffd1528e2e8b814e983
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>