This hasn't worked for some time. It's not in our CI and I don't think
it was working at all. When I tried to build it, I ran into several
problems with C++17 and an Internal Compiler Error I did not have any
interest in working around.
After discussing with the Intel compiler team, it was decided that
fixing those issues in the old compiler is not going to happen. Instead,
their recommendation is to adopt the new LLVM-based compiler, which
the last commit added support for.
This commit does not remove qmake support for the old ICC. It's possible
someone is using qmake with a non-Qt6 project and ICC.
Change-Id: Icb2516126f674e7b8bb3fffd16ad6350ddbd49e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This includes a few cleanups to our .cmake files where it was easier to
combine existing sections of Clang / AppleClang that no longer needed to
be distinct.
icpx could be replaced with a shell script:
exec `basename $0`/clang++ --intel "$@"
tst_qnumeric is not passing
FAIL! : tst_QNumeric::classifyF() Compared values are not the same
Actual (qFpClassify(tiny / two)): 2
Expected (FP_SUBNORMAL) : 3
Loc: [/home/tjmaciei/src/qt/qt6-icx/qtbase/tests/auto/corelib/global/qnumeric/tst_qnumeric.cpp(344)]
FAIL! : tst_QNumeric::classifyD() Compared values are not the same
Actual (qFpClassify(tiny / two)): 2
Expected (FP_SUBNORMAL) : 3
Loc: [/home/tjmaciei/src/qt/qt6-icx/qtbase/tests/auto/corelib/global/qnumeric/tst_qnumeric.cpp(344)]
FAIL! : tst_QNumeric::floatDistance(denormal) Compared values are not the same
Actual (qFloatDistance(from, stop)): 0
Expected (expectedDistance) : 4194304
Loc: [/home/tjmaciei/src/qt/qt6-icx/qtbase/tests/auto/corelib/global/qnumeric/tst_qnumeric.cpp(408)]
FAIL! : tst_QNumeric::doubleDistance(denormal) Compared values are not the same
Actual (qFloatDistance(from, stop)): 0
Expected (expectedDistance) : 2251799813685248
Loc: [/home/tjmaciei/src/qt/qt6-icx/qtbase/tests/auto/corelib/global/qnumeric/tst_qnumeric.cpp(408)]
P
Change-Id: Icb2516126f674e7b8bb3fffd16ad59431e8c3379
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake doesn't add framework include paths for the includes if
add_custom_command is used. When all Qt modules are installed to a
single directory, frameworks could be found under
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX, but for Conan builds
each module is installed to the separate directory. These directories
need to be listed in the QT_ADDITIONAL_PACKAGES_PREFIX_PATH variables
family. This takes into account directories that are listed in the
QT_ADDITIONAL_PACKAGES_PREFIX_PATH variables and considers they
can contain frameworks.
Pick-to: 6.2
Fixes: QTBUG-96511
Change-Id: I664381df4859a2e85c399cd94dc2f3996e452c03
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
c++latest does check that our headers also work with upcoming C++20
support in MSVC. It also implicitly sets -permissive-, which checks for
stricter standards compliance.
Pick-to: 6.1
Task-number: QTBUG-91117
Change-Id: Iaf1547191969213d570a1b2f59888ad04a7977ab
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The headers are already somewhat tested with C++17 in the regular
build. So let's try in the headers_clean check with C++20 instead.
Using C++20 with MSVC 19.28 doesn't work yet though:
corelib/tools/qalgorithms.h(247): error C2039: 'popcount': is not a member of 'std'
corelib/tools/qhashfunctions.h(311): note: see declaration of 'std'
corelib/tools/qalgorithms.h(247): error C3861: 'popcount': identifier not found
...
Task-number: QTQAINFRA-4242
Change-Id: I1b48bcb9656fe1587fe03d3a17e3484c693aa295
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Header files of a Qt module are usually found in subdirectories.
Avoid creating object file paths like "header_foo/bar.h.o".
When building with conan, the "header_foo" subdirectory was not created
for whatever reason.
Now, we make sure we have clean object file paths, e.g.
"header_check/foo/bar.h.o", and we create the directory upfront before
invoking the compiler.
Fixes: QTBUG-90529
Change-Id: Ifa5d6b97e07fc4e249c58cda5128439d60b14f5f
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
(cherry picked from commit 54980200c79b466a276a4d3054390e4b3162e9ed)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
When building a Qt module against an installer-provided Qt on macOS, the
module pulls in the headersclean feature that creates the *_header_check
targets. Those targets try to compile the public headers of the module,
and the compilation command contains the -iframework argument. That
-iframework argument is supposed to point to the directory where the Qt
libs are installed. However, it pointed to the original
CMAKE_INSTALL_PREFIX of the machine where Qt was packaged.
Use the QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable instead
that contains the real installation location, even for an
installer-provided Qt.
Pick-to: 6.0
Fixes: QTBUG-90402
Change-Id: I27de8b3cc816488c2716042383b334d5c421452d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Before CMake 3.19, we are not allowed to query non INTERFACE_ prefixed
property names from INTERFACE libraries. And it was the wrong thing
to do as well. Prefix the properties with INTERFACE_ as appropriate.
Don't try to add INTERFACE_COMPILE_DEFINITIONS from header only
modules to the headerclean compile commands. This causes configuration
issues with UiPlugin in qttools. Fortunately it seems that qmake
doesn't do that for 'header_module's either.
Finally don't query for the FRAMEWORK property on the passed target
(INTERFACE libs can't be frameworks). Instead just query if the whole
Qt build itself is a framework build.
An issue was discovered regarding QT_NO_ENTRYPOINT genexes breaking
headersclean add_custom_commands for UiPlugin in qttools. To avoid
this the property was renamed to all lower case in
6ca66de9120537134b63d42de6c53c6e5834e8f3. This avoided the immediate
issue, but it's possible it might resurface in the future with a
different property name that wasn't renamed. In particular I thought
it might happen with QT_NO_UTF8_SOURCE but it didn't.
In case something like that happens again, the two possible solutions
are to bump minimum CMake version requirement to 3.19 (where upper
case property names are allowed to be queried from INTERFACE libs) or
to implement recursive include directory fetching similar to our
qt_internal_walk_libs implementation.
Pick-to: 6.0
Task-number: QTBUG-86053
Task-number: QTBUG-82615
Change-Id: I7815d555ec9ea049a8fd40f2a2f072dcb9f5e9c3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's not sufficient to pass -I{prefix}/include when doing the header
clean check.
We need to propagate all target include directories and compile
definitions, and also the compile flags for good measure.
For macOS frameworks we also need to explicitly pass an -iframework
flag (qmake passses -F instead), to ensure that <QtGui/qfoo.h> style
includes are found when building other repos than qtbase.
Task-number: QTBUG-82615
Change-Id: I76d12340bc01c5c948ff04df9a3df384dcb7e076
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This ensures ccache or sccache is used to cache the compilation of the
headerclean checks.
Task-number: QTBUG-82615
Change-Id: Ie944eb1d643e7271551c9f8337609741e419e9d8
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
It appears there's a difference between the chosen macOS compiler path
in the CI versus the compiler path on my local machine.
In the CI the chosen compiler path ends up 'being /usr/bin/clang++'
whereas for me locally it's
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/c++
For some reason the headersclean commands succeed in the CI, but
locally they fail for me saying that standard library includes can not
be found, unless an explicit sysroot flag is specified.
I assume that in the CI the '/usr/bin/clang++' compiler shim chooses some
implcit sysroot, whereas the longer Xcode compiler expects an explicit
sysroot.
It's probably also affected by the fact that in the CI we pass an
explicit CMAKE_OSX_SYSROOT to a non-standard Xcode location e.g.
/Applications/Xcode11.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk
Note the '11' in the Xcode app name.
Locally I don't pass a custom CMAKE_OSX_SYSROOT, and my Xcode is
installed in a regular location e.g /Applications/Xcode.app.
The sysroot flag and path is added to regular CXX compilation rules
inside CMake's core (in cmLocalGenerator.cxx).
Reuse the same variables that CMake uses and add them to our headersclean
command rules.
Task-number: QTBUG-82615
Change-Id: Ic03ea27e39471f5fa168eb5970bf3d3f1d1be251
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Having ${QT_BUILD_DIR}/include as include path is not enough for
modules outside of qtbase. They also need to pick up headers from e.g.
Qt Core, which are available only in "${CMAKE_INSTALL_PREFIX}/include"
This amends db21bad936
Fixes: QTBUG-82615
Change-Id: Ib003a66ce039bf1ab6e21a3b1cd86923207eb3db
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
C4180, C4458 were disabled already in 2012, in commit 6668f5becf.
C4577 was disabled due to QtScript being compiled without exception
support in commit 97d7d80e73.
Anyhow, Qt Script is now officially gone in Qt 6, and Qt headers
do work just fine with C4180. Finally, C4458 is nowadays a W4 warning,
so not enabled in the first place.
Task-number: QTBUG-82615
Change-Id: I2f9b8e858817876b069a166129fbfac7ef3587a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Configure Qt with -DQT_FEATURE_headersclean=ON to enable the
check. There will be separate target for each module include
(e.g. QtCore_header_check), but the check will also be done
when the module is built for the first time.
There are notable differences to the qmake version:
- the build does not pick up anymore default defines or flags from
the module, or Qt. Instead options like -fPIC they have to be listed
explicitly. Also for this reason, we have to skip the vulkan-related
headers from the check, since vulkan/vulkan.h is not necessarily
in the compiler's default search path.
- some checks for nowadays unsupported compiler versions are
removed.
- -Wdouble-promotion -Wshorten-64-to-32 is not added for clang
builds; the qmake code path did never enforce that on CI
machines (it was non-Apple clang only), and the check currently
fails on these configurations.
Fixes: QTBUG-82615
Change-Id: I1cd303677b1472116910b6c27748f96436feb35e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
