Both QTimer's and QObjectPrivate's destructors print a warning if the
current object lives on another thread and has an active timer:
QWARN : tst_QTimer::moveToThread() QObject::killTimer: Timers cannot be stopped from another thread
QWARN : tst_QTimer::moveToThread() QObject::~QObject: Timers cannot be stopped from another thread
This timer is used to ask the thread to quit, which in turn allows us to
destroy this QObject without a cross-thread warning. Because it's
already fired once and done its duty, we can make sure it's not active
by simply making it single-shot.
Pick-to: 6.4 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17465067b27c044b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
We so far refetched the first observer after evaluating bindings, as
binding evaluating might change the list of observers.
However, that approach did not take into account that the 'this' pointer
might no longer be valid after binding evaluation: In case of a
QObjectBindableProperty (or a QObjectCompatProperty), binding evaluation
might cause a reallocation of the binding storage, and consequently the
invalidation of the QPropertyBindingData.
Fix this by refetching the QPropertyBindingData from the storage (if a
storage has been provided, which is always the case for the affected
classes).
Fixes: QTBUG-111268
Pick-to: 6.5 6.4 6.2
Change-Id: Ie7e143a0bbb18f1c3f88a81dd9b31e6af463584f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The code for the QMetaMethod queuedConnectionTypes overload relied on
QMetaMethod::parameterMetaType and QMetaType::flags() to detect whether
we're dealing with a pointer (and then use the VoidStar metatype instead).
However, if the type was incomplete when the slot was defined, and the
type was not registered when connect was called, we would not find a
metatype for the argument.
However, in that case we might still be able to handle the method, by
checking whether the type name of the arguments ends with a "*".
This patch does that, fixing a regression from 5.15.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-108537
Change-Id: I54cc48a3343444480ab9094fe1ebaaa5aa75cee0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A RAII wrapper around Qt::{begin,end}PropertyUpdateGroup().
[ChangeLog][QtCore][QScopedPropertyUpdateGroup] New RAII class
wrapping Qt::beginPropertyUpdateGroup() and
Qt::endPropertyUpdateGroup().
Fixes: QTBUG-110710
Change-Id: If2619e9584dd9d57985d63e3babca75421499ab9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
A QVariant(QString) was not convertible to an enum not registered with
Q_ENUM() which worked fine in Qt5.
The same problem exists for QVariant(enum) to QString.
Fix it by not bailing out when no metatype for the enum was found and
try to convert it to a qlonglong instead (which is then correctly
converted to the enum type).
Fixes: QTBUG-109744
Pick-to: 6.5 6.4
Change-Id: Ie7bb016a860455b69508f0f46b36474c9c294f3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes a use-after-free in QPropertyDelayedNotifications::notify.
Before this patch, evaluateBindings or a notify from a property index
might have caused the originalBindingData to become reallocated.
However, at that point, we've already restored the original bindingData
in evaluateBindings, so we won't track updates, and thus won't adjust
originalBindingStatus, which will then point to already freed data.
To remedy this, we no longer do the notification with data fetched from
originalBindingData, but instead use the information we have in the
proxyData.
We also need to enure that referenced bindings do not get deleted; for
that we keep the PendingBindingObserverList alive for the whole duration
of the endPropertyUpdateGroup.
As we now have the PendingBindingObserverList, we use it for the
notification logic, and only notify change handlers in
QPropertyDelayedNotifications::notify. That will allow a follow-up
cleanup of QPropertyObserverPointer::notify, and aligns the logic for
grouped updates with the logic for "nornal", non-grouped updates.
Amends f1b1773d0a.
Task-number: QTBUG-110899
Pick-to: 6.5 6.4 6.2
Change-Id: Iae826e620d9614b7df39d86d8a28c48c8a5c4881
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
That use case for the class never materialized, and it was actually
meant for internal use. However, we put it into the public header, so
we cannot remove it (and while undocumented, someone actually used it at
some point, compare e4d62651c2).
Mark it as deprecated instead so that it can be finally be removed in Qt
7.
Change-Id: I058c5831a44610121fbec6eaddebd8b33d4a16c9
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This addresses two different issues:
- Firstly, we were casting the resolved binding data pointer to
QPropertyProxyBindingData, instead of the d_ptr of
QPropertyBindingData. Fix this by introducing a helper function,
and consistently using it to access the proxy data.
- Secondly, we were not resetting the originalBindingData when the
pointed to object was destoyed. Fix that, too.
Pick-to: 6.5 6.4 6.2
Task-number: QTBUG-110899
Change-Id: I7691c9df5cc26e761f6b0e5f16d152f7f2183208
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The fact that read-access is always included makes a bool readWrite
property a little awkward to document and explain. An AccessMode enum
with values ReadOnly and ReadWrite is much easier, and will also lend
itself more easily as a constructor argument than a boolean.
Found in API review.
Pick-to: 6.5
Change-Id: I4f20dbe9f19c7bdb52248a6e544e36d731d5a2ee
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's not a lot of files, but it's actually more in the same dir than
mime/ does right now. I'm about to add two more files, though I'll also
merge a few more later.
Change-Id: Id8d5e3999fe94b03acc1fffd171bfe2ea36a35a7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
As discussed in API review, the default-constructed T() returned from
a mismatched data<T>() call is indistinguishable from a real T with
default state.
To make them distinguishable, return optional<T>. Call the new
function value<T>(), mimicking QVariant::value<T>(), and suggested in
API review, because data() is usually used to return raw pointers, not
values.
Remove the qWarning() on requestedType and actualType mismatch, as the
new function can be used in std::get_if/dynamic_cast-like if-then-else
chains, in which failure is part of the normal operation, and a
warning message misplaced:
if (auto loc = perm.value<QLocationPermission>())
~~~ use *loc ~~~
else if (auto con = perm.value<QContactsPermission>())
~~~ use *con ~~~
~~~ etc ~~~
Pick-to: 6.5
Change-Id: I799a58e930307323ebce8f9ac50a42455e9c017f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The new test:
- checks the properties of stateful Q<Typed>Permissions work
- ensures that piping a Q<Typed>Permission through QPermission
maintains state
- also ensures that assignment of a Q<Typed>Permission to a
QPermission works (via QPermission(Type) + move ctor)
Pick-to: 6.5
Change-Id: I340e49b1ecc665702ccab26d9050ca158b0e7885
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
To be extended as neeeded.
Pick-to: 6.5
Change-Id: I57d2f55f67de073fe3e4916b7ba655342cf661dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
If a type is trivially default constructible, QMetaType (and QVariant)
think that it can be built and value-initialized by zero-filling a
region of storage and then "blessing" that storage as an actual instance
of the type to build. This is done as an optimization.
This doesn't work for all trivially constructible types. For instance,
on the Itanium C++ ABI, pointers to data members are actually
value-initialized (= zero-initialized, = initialized to null) with the
value -1:
https://itanium-cxx-abi.github.io/cxx-abi/abi.html#data-member-pointers
This means that a type like
struct A { int A::*ptr; };
is trivially constructible, but its value initialization is not
equivalent to zero-filling its storage.
Since C++ does not offer a type trait we can use for the detection that
we want to do here, and since we have also decided that Q_PRIMITIVE_TYPE
isn't that trait (it just means trivially copyable / destructible), I'm
rolling out a custom type trait for the purpose.
This type trait is private for the moment being (there's no
Q_DECLARE_TYPEINFO for it), and limited to the subset of scalar types
that we know can be value-initialized by memset(0) into their storage
(basically, all of them, except for pointers to data members).
The fix tries to keep the pre-existing semantics of
`QMetaType::NeedsConstruction`. Before, the flag was set for types which
were not trivially default constructible. That included types that
aren't default constructible, or types that cannot do so trivially.
I've left that meaning unchanged, and simply amended the "trivial" part
with the custom trait. A fix there (to clarify the semantics) can be
done as a separate change.
Change-Id: Id8da6acb913df83fc87e5d37e2349a4628e72e91
Pick-to: 6.5
Fixes: QTBUG-109594
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
in our tests.
They are not needed anymore since
d20f4ae706 got merged and the
QT_ANDROID_PACKAGE_SOURCE_DIR property is read at generation time
rather than configure time.
This means the
qt_internal_add_test ->
qt_internal_add_executable ->
_qt_internal_android_executable_finalizer ->
qt_android_generate_deployment_settings
calls take care of generation the right value for the property even
with CMake 3.16.
Remove the direct qt_android_generate_deployment_settings calls,
in preparation for their deprecation in public api.
Pick-to: 6.5
Task-number: QTBUG-88506
Task-number: QTBUG-88840
Task-number: QTBUG-108508
Change-Id: Ief1d0f9f620bd37beeedde26dedb66f728fa4a6f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This saves (mostly in corelib/time/) some complications that used to
arise from needing different code-paths for different time-specs.
Task-number: QTBUG-108199
Change-Id: I5dbd09859fce7599f1ba761f8a0bfc4633d0bef9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Put core includes all in a common form, sort alphabetically.
Remove a stray blank line.
Change-Id: I211c6b407f5e49d907cb065521883567f1dd30f4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Implements an adaptor from the notification signal of a Q_PROPERTY to
QBindable. The Q_PROPERTY does not need to be BINDABLE, but can still
be bound or used in a binding.
[ChangeLog][Core][Q_PROPERTY] Q_PROPERTYs without BINDABLE can be wrapped in QBindable to make them usable in bindings
Change-Id: Id0ca5444b93a371ba8720a38f3607925d393d98a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
I've reserved the IDs for int128, uint128, bfloat16, and float128,
because the mask in qvariant.cpp's qIsNumericType() requires primitives
to be less than 64 to operate properly.
Added a QMetaType/QDataStream test to confirm it is indeed built-in.
Change-Id: I3d74c753055744deb8acfffd17247f7f57bada02
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Most of them were easy to change. The pair one was a bit of a stretch,
but still worked. I've removed the lines on QPair, since QPair is
std::pair in Qt 6.
Change-Id: I3d74c753055744deb8acfffd17246ec98c583d08
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
qIsNumericType does not return true for enum types, which meant we never
called numericCompare() or numericEquals() when one of the types was an
enum.
Task-number: QTBUG-108188
Change-Id: I3d74c753055744deb8acfffd172449c68af19367
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The code implementing the C++ rules of type promotion and conversion
was too pedantic. There's no need to follow the letter of the standard,
not when we can now assume that everything is two's complement (this was
true for all architectures we supported when I wrote this code in 2014,
but wasn't required by the standard).
So we can reduce this to fewer comparisons and fewer rules, using the
size of the type, not just the type ID.
Change-Id: I3d74c753055744deb8acfffd172446b02444c0c0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It seems the value name correction is not needed at all,
and we must not do such correction.
Amends commit 738e05a55a
Task-number: QTBUG-107794
Change-Id: I903a762aafab4b55275beb8438e6769285821567
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
To allow the user to customize the C++ code that QDoc sees, so as to be
able to work-around some limitations on QDoc itself, QDoc defines two
symbols: Q_QDOC and Q_CLANG_QDOC, both of which are "true" during an
entire execution of QDoc.
At a certain point in time, QDoc allowed the user the choice between a
custom C++ parser and a Clang based one.
The Q_QDOC symbol would always be defined while the Q_CLANG_QDOC symbol
would be defined only when the Clang based parser was chosen.
In more recent times, QDoc always uses a Clang based parser, such that
both Q_CLANG_QDOC and Q_QDOC are always defined, making them equivalent.
To avoid using different symbols, and the possible confusion and
fragmentation that derives from it, all usages of Q_CLANG_QDOC are now
replaced by the equivalent usages of Q_QDOC.
Change-Id: I5810abb9ad1016a4c5bbea99acd03381b8514b3f
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
I wrongly assumed we can't query a value with an empty name ""
during the previous refactor commit, however, in Windows registry,
an empty name for a value means the default value of a key, we can
read and write it through the "Default" name.
Remove the wrong assert to fix the crash when we are trying to query
a default value of a key.
Add a new test case to test this kind of scenarios.
Amends commit 40523b68c1
Fixes: QTBUG-107794
Change-Id: Idacbcb86df4435a8c1ca1c19121599390ae8f3d3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Various places were knowingly provoking warnings without telling QTest
to check for and suppress those warnings. Some others did check for
this warning, so let's consistently suppress the noise.
Change-Id: I71b9829680c7a513f4d8fbb3c57442875a6c2dc4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
It's not clear why this test repeats each test-case five times, but
give the duplicates distinct names, at least.
Change-Id: I4a098d90c3fe6f61842745c1d5f62047fe13a9b5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were simply two copies of the same row-adding code.
Change-Id: I12240dedf2649c314ad32984f4de9d6b9bf280d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The typeSignature for a type T[] is always "[" + typeSignature<t>, so we
can just implicitly support arrays of any known type. To prevent support
for multi-dimensional arrays, make sure that the underlying type is not
also an array.
By adding a QJniTypes::isArrayType in addition (that is true for any
type with a signature starting with '['), methods like
QJniObject::callMethod could then return a special QJniArray type that
provides array-specific functionality.
As a drive-by, and since all lines need to be touched to add braces,
replace std::is_same<>::value with std::is_same_v.
Change-Id: Iccadf03cfceb8544381a8f635bb54baeddf46c99
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
It was our old, HP-UX machine on Itanium (ran on big-endian mode). We
don't support HP-UX any more; HP will still support the 11i v3 release
until 2025, but I doubt anyone wants to run any new software there. One
hopes that HP has long since fixed the issue, but I doubt it since the
last release is from 2007. Gravlaks probably ran HP-UX 11i v3.
There are a couple other left-overs of ".troll.no" in the repository,
the majority of which are URL manipulation in tst_qurl.cpp and in
tst_qnetworkcookie.cpp, then the certificates for fluke.troll.no (valid
until 2035) and aspiriniks.troll.no (expired in 2009, but we don't need
it for validity).
Change-Id: I810d70e579eb4e2c8e45fffd1719122747d7b85a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
To indicate success of a conversion, the public API has previously only
supported registering member functions of the form To (From::*)(bool *).
When adding custom converters for types that cannot be modified, this is
usually not a possibility.
As an alternative, this patch adds support for std::optional in the
UnaryFunction overload of QMetaType::registerConverter. If the returned
optional has no value, the conversion is considered failed.
Task-number: QTBUG-92902
Change-Id: Ibac52d2cb9b5a2457081b4bebb0def1f03e3c55d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
__has_include(<chrono>) is always true, because C++11 chrono include
is required since 6.0.
Pick-to: 6.4 6.3 6.2
Change-Id: I50cb92571bf4f1f86e2f3f2b5f486dd3c3f30f4a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Refactor QWinRegistryKey to make it more modern and more
usable from outside.
Adjust the test for QWinRegistryKey to test the new functions,
merged with the original test.
Will port raw registry accessing code in QtBase to use this
class in follow-up commits. This change is the first step.
The long term goal is to port QSettings registry code to
this class instead of using raw Win32 APIs, however, there's
much more registry code in QSettings and migrate them to this
class needs a large refactor, so jsut leave it for now. Will
fix it in some future commit.
Change-Id: Iada2adb41b4d58e1b658ff6870a4b31ace479d43
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Some tests in corelib/kernel need threading support, but they are not
guarded against compilation if Qt is built without threading.
Such tests have been disabled in this case.
Change-Id: I2f5dc9582f2a59b6af2a9e56638b045dca06193d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Batching the tests leads to one of the tests tst_qmetaobject and
tst_qmetaobject_compat not being registered in the batch. Attempts to
batch those together fail as batch test name is defined per-source,
which, in this rare case, is the same across the two targets.
Change-Id: I356931feabc004c39ba0b6863b5f64e06d739a58
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
[ChangeLog][QtCore][Meta Object] QMetaMethod::invoke(),
QMetaObject::invokeMethod(), and QMetaObject::newInstance() are no
longer limited to 10 arguments.
[ChangeLog][QtCore][Meta Object] The use of the Q_ARG macro is no longer
necessary when using QMetaMethod::invoke(), QMetaObject::invokeMethod(),
and QMetaObject::newInstance(). Types may now be passed
directly. Similarly, Q_RETURN_ARG can be replaced by the free function
qReturnArg().
[ChangeLog][Potentially Source-Incompatible Changes]
QMetaMethod::invoke(), QMetaObject::invokeMethod(), and
QMetaObject::newInstance() no longer support passing forward-declared
types in the argument list (it was possible to pass them by
const-ref). From Qt 6.5 onwards, all types in the argument list must be
fully defined.
[ChangeLog][Potentially Source-Incompatible Changes] Attempting to use
the internal types QArgument, QReturnArgument, QGenericArgument, or
QGenericReturnArgument directly with QMetaMethod::invoke(),
QMetaObject::invokeMethod() or QMetaObject::newInstance() may fail to
compile. Those are internal types that were never meant to be used
directly and will be removed in Qt 7. If really necessary, ensure all
arguments passed to those functions are directly using those classes and
not mixed with Q_ARG and Q_RETURN_ARG. Implementations of bindings to
other languages should contact the Qt development mailing list to
discuss options.
Change-Id: I36b24183fbd041179f2ffffd1701e3e8e47e0fba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The doc of QMetaEnum::valueToKey() says to use ::valueToKeys() instead
for flag types.
Pick-to: 6.4
Change-Id: I48e5ba47324137f2ce2710f1d876e93e7c562e9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
[ChangeLog][QtCore][Meta Objects] The QMetaObject::invokeMethod() taking
a method name by string, QMetaObject::newInstance(), and
QMetaMethod::invoke() now support more than 10 arguments.
[ChangeLog][QtCore][Meta Objects] The use of the Q_ARG and Q_RETURN_ARG
macros is now optional with QMetaObject::invokeMethod(),
QMetaObject::newInstance(), and QMetaMethod::invoke(): the type name
will be obtained from the C++ type (the same as QMetaType). The function
qReturnArg() can be used in place of the Q_RETURN_ARG macro. The macros
are still useful in rare conditions where the type was typedef'ed from
its original name.
Change-Id: I36b24183fbd041179f2ffffd17022a2b48c7639b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The patch includes the following replacements:
* QMetaType::type("name") -> QMetaType::fromType<Type>().id()
* QMetaProperty::type() -> QMetaProperty::typeId()
* QVariant::Type -> QMetaType::Type
* qRegisterMetaType<T>("name") -> qResigeterMetaType<T>()
* The static QMetaType::{load,save} methods are replaced with
non-static versions
* Replace QCOMPARE(property.type(), QVariant::UserType) with
QCOMPARE_GT(property.typeId(), QMetaType::User), because the
deprecated type() method was treating each custom type
(id >= QVariant::UserType) as QVariant::UserType, while the
typeId() method simply returns the actual id.
As a drive-by: remove unneeded QMetaType registration tests
as we have tst_QMetaType to check it.
Task-number: QTBUG-104858
Change-Id: Ia08e002efdf07ff83366a5193164dba96a956f9a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
