Without features getifaddrs and ipv6ifname we cannot
get correct IPV6 information for interfaces.
Pick-to: 6.2 6.3
Change-Id: I7f8c4e68d345160d218fde8db640440f3324014e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When we create a QPixmap using QWidget::grab(), a default system
image format is used for that.
On Android this format is ARGB32_Premultiplied, while on the desktop
systems it is RGB32.
The images that are saved in the resources and used as references, also
have the RGB32 format.
As a result, on Android we need to convert the pixmap to a proper format
before comparing it to the reference.
Fixes: QTBUG-69064
Pick-to: 6.3 6.2
Change-Id: I2d881e508d34e0b1a2a1a7bffcbc71ae2907d31d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
QHeaderView creates persistent indexes in
_q_sectionsAboutToBeChanged(), called by the slot connected to
rowsAboutToBeMoved/columnsAboutToBeMoved.
In the case of rows, QAbstractItemModel emits the signal *before*
preparing to update persistent indexes in itemsAboutToBeMoved(),
so it can see the ones newly created by QHeaderView, all is well.
In the case of columns, the emit was done *after* calling
itemsAboutToBeMoved(), so the additional persistent indexes created by
QHeaderView were ignored, and in endMoveRows() we could end up with:
ASSERT failure in QPersistentModelIndex::~QPersistentModelIndex: "persistent model indexes corrupted"
This bug has been there since the very beginning of beginMoveColumns(),
but was undetected because moving columns in a model is pretty rare
(in my case there's a QTransposeProxyModel that turns columns into
rows in the underlying model, and a proxy that handles dropMimeData...)
Pick-to: 6.3 6.2 5.15
Change-Id: I74bad137594019a04c2a19c2abb351ff3065c25a
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
At least one OS (QNX) can't dlopen() a library that is still
open for writing elsewhere
Pick-to: 6.2 6.3
Fixes: QTBUG-101020
Change-Id: I84ca709a65fc824ec4b3e3f1ea03704bf1cc0414
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Android we had 10 failing unit-tests in tst_qaccessibility
One of them was failing because on Android QMdiSubWindow is created
maximized by default, so we need to explicitly call showNormal() on
it before doing all the checks.
Other 9 were failing because we didn't get A11Y events when expected.
This is a bit more tricky.
On Android a11y state is not explicitly set by calling
QPlatformAccessibility::setActive(), there is another flag that is
controller from the Java side. It is set to 'true' only when some
of the a11y services are enabled on the device. The state of this
flag is queried during event processing, so a11y state can be reset
to false while we do QTest::qWait().
This logic is absolutely correct for real applications, but it is
a problem for the test case, because we can't easily enable a11y
services in the CI.
To overcome the issue in unit-tests, re-enable a11y before each test.
A more precise fix will require re-enabling it after every qWait() or
processEvents() call, but the current tests pass with such condition.
Fixes: QTBUG-87674
Pick-to: 6.3 6.2
Change-Id: I6f765bc6d3aaeaa19aba3a64473ea25e9cbdb0f8
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The content of the window was intended to trigger wrapping.
On Android, the window is larger, so more content is
necessary. This patch adds more content.
Fixes: QTBUG-87401
Pick-to: 6.2 6.3
Change-Id: I33a2fe4560c358f2b0b83523ee4ab26bb5dd2513
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The stored layout direction used to get changed during initialization
to what was auto-detected based on the translation. Changing the
translation then overwrote that stored value, even if an explicit call
to setLayoutDirection was made by the application.
Calling QGuiApplication::setLayoutDirection(Auto) has so far been a
no-op.
Change this logic so that the stored layout direction continues to be
LayoutDirectionAuto also if it's set based on auto-detection, and only
overwrite it when explicitly called with a non-Auto value. This way,
applications can set a layout direction that stays unchanged even when
translators are installed.
Add test coverage that uses a QTranslator.
In practice, this is not a change of behavior, unless applications called
setLayoutDirection(Auto) (which is no longer a no-op), or called
setLayoutDirection() and then installed a translator and expected the
translator's layout direction to come into effect in spite of the explicit
setting.
[ChangeLog][Gui][QGuiApplication] Calling setLayoutDirection with a non-
auto value now disables the auto-detection based on installed
translators. Applications that explicitly set a layout direction and also
want translators installed afterwards to take effect should reset the
layout direction to Auto, which is now no longer a no-op.
Fixes: QTBUG-100632
Pick-to: 6.3
Change-Id: I1fdcebd43a9b1b468ff95bf15f53f441bb214e08
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This format will be changed by the next commit. Also it is an
implimentation detail that can be changed at any time.
Task-number: QTBUG-95889
Change-Id: I00b1133078f1035e03e2cd6fae28192de54d2154
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Hiding a row in a form layout is inconvenient to do as access to the
widgets in each row is cumbersome. In addition, a row might include a
layout for the label or the field column, and we can't hide layouts and
instead need to navigate to the widgets inside the layout. And even if
an application developer does all that, the spacing calculation doesn't
ignore hidden rows.
Add setRowVisible and isRowVisible APIs with the usual overloads.
Implement the logic to traverse a layout item to its contained widgets,
so that they are explicitly hidden when a row is hidden, and skip hidden
rows in the spacing calculation.
[ChangeLog][Widgets][QFormLayout] New APIs setRowVisible and isRowVisible
to hide and show rows in a form layout.
Fixes: QTBUG-6864
Change-Id: I6af98409802f331c4523e91d7dac8a97762c579d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The test is not only flaky on Windows 10 but also on Windows 11.
Pick-to: 6.2 6.3
Task-number: QTBUG-100412
Change-Id: I27e8179dafd4743c3eaf2c0dd8b70b804612c7c2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_qtextdocument was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: Ie1bd75c21e481c2ecb8607c04ce9370fc6d7b00e
Reviewed-by: Samuel Mira <samuel.mira@qt.io>
Reviewed-by: Pekka Gehör <pekka.gehor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qgraphicsview was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Task-number: QTBUG-87397
Pick-to: 6.2 6.3
Change-Id: Ib604274d098c271e22b010e6cb822fdf9553df1c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Samuel Mira <samuel.mira@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
There was a test for Qt4 compatibility in tst_qheaderview.
We don't run it since Qt 6.
This patch removes the unused code.
Change-Id: I751829ac5a142e79379e81e9e739107544cf7406
Reviewed-by: Arnaud Bienner <arnaud.bienner@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: Ie2974a0e2fec9b16d9d023730b76fa2a32f77e65
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As QNX claims to support abstract Unix-domain sockets, its getsockname
always returns for socket that has not been bound to local name
address_len of sun_path as maximum length (106) even when it does not
contain valid address.
https://www.qnx.com/developers/docs/7.1/index.html#com.qnx.doc.neutrino.lib_ref/topic/u/unix_proto.html
Pick-to: 6.2 6.3
Change-Id: I0f0f5c05611c8db6af35377dde16450f58c83c56
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just as a minor debugging helper: when warning that an invalid
regular expression object is being used to match, also print
the used regular expression pattern.
Change-Id: I0f99bcf4ca87ec67d04ed91d9dc315814f56d392
Fixes: QTBUG-76670
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The view.resize() command has no effect if the requested
size is smaller than the screen. So the view has space for
the whole model. It then won't scroll, so scrolling cannot
be tested.
This patch enlarges the model so that scrolling is always
necessary and thus possible.
Task-number: QTBUG-87407
Pick-to: 6.2 6.3
Change-Id: Ibff512158d9c16be120a69c7328b6d0ae2c3b551
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Some tests were blacklisted, but the problems cannot be reproduced
any more. This patch activates them.
Fixes: QTBUG-87404
Pick-to: 6.2 6.3
Change-Id: I5944c750a5717daaf43a22d6d1fa51ae54fc3da2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qopenglwidget was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: I7ea55f262f362c098b52e1b1a319b26c31a7e067
Reviewed-by: Pekka Gehör <pekka.gehor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qdom was disabled because it crashed. It does not any more.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: I41117938fe9d93b510c4a60beb4c2f5b20991434
Reviewed-by: Pekka Gehör <pekka.gehor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Port the test to use the QWindow* based overloads of QTest::mouseMove()
and move the cursor away.
Pick-to: 6.3
Task-number: QTBUG-98489
Change-Id: Id1ac0ef176c6f9bf179f989ddd5775877525fc0d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Makes it easier to interpret the output from the test, because of
embedded newlines.
Pick-to: 6.3
Change-Id: Ic15405335d804bdea761fffd16d4f141e09537f4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Simplifies the code. And removes the unnecessary quote around the
pattern that was there, for some reason.
Pick-to: 6.3
Change-Id: Ic15405335d804bdea761fffd16d4f135edf6993b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The redirect handling for http2 was a little simple. E.g. not handling
relative URLs.
Fix this using the redirect response parsing function which the http1
protocol handler already uses.
Fixes: QTBUG-100651
Pick-to: 6.3 6.2 5.15
Change-Id: Ic0cec4cacc92707e7a7fde1f4665f80995a6057e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test always fails when either the Xcb or UNIX, one of the Windows
event dispatchers is used. So only test for the event dispatcher name,
which then covers all platforms, including QNX and INTEGRITY (which
use the UNIX event dispatcher).
Pick-to: 6.3 6.2
Change-Id: I2e315831b53f823c5496ad0319319df78f064cc1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Bring out the asymmetry between date and time more clearly; when date
is valid, an invalid time is ignored in favor of QTime(0, 0). At the
same time, eliminate an un-needed variable from the code that
implements this special handling. (Left over from when the QTime was
passed by const ref, rather than by value.)
Change-Id: I81d8a9026cbb7887a8c638a2761b3db54c088af7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It can now use startOfDay()/endOfDay() for the end-points of its
search range; and it should check transit is not empty before
dereferencing transits.at(0).
Change-Id: Ib1568f4d8d6ce301d601071bb58185be906c631a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- ICU is not supported by backend.
System supports only a simple named UTC time zone implementation(see QUtcTimeZonePrivate)
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I4a87fc3d5484d75d55890bf88d012955e5048a0b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Relying on string manipulation leads to -Wredundant-parens warnings in
the best case, and to non-compiling code (when using typedefs) in the
worst case.
We can avoid both issues by simply generating code that uses
add_pointer, which takes care of reference types (even typedef'd ones),
and creates no warnings about parens (as we don't write any anymore).
Fixes: QTBUG-100915
Pick-to: 6.3 6.2
Change-Id: Ic5b1cbfda20d920d11f51beeb62e9479261d5f00
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Moved to after the header is actually written, not just generated.
For requests with data (put/post) we may have to wait for a callback
before the data to write is available. Since we then delay writing the
header as well it would be disingenuous to emit requestSent().
Pick-to: 6.3
Change-Id: I76c2d40ca48faaa1f6730ce8b3d5a8a4c3156f8f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Some of the UI elements in the a11y tests are allocated dynamically,
which means that if the test fails, the element is not destroyed
properly. As a result, the "hanging" UI elements affect all the
following tests, which leads to more test failures and even hangs.
This patch wraps all such allocations into smart pointers, which
guarantees correct destruction in case of test failure, so that other
tests are not affected, and also prevents memleaks.
As a drive-by:
- use nullptr instead of 0 in constructors;
- create some objects on stack instead of dynamically allocating
memory for them;
- remove some unneeded 'delete' calls for the objects that belong
to QObject-hierarchy.
Task-number: QTBUG-87674
Pick-to: 6.3 6.2
Change-Id: I0dcc26990955cd7b240a689a7438880b686985b7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
These tests rely on reading output sent to stderr, so make
sure their output does go there.
Pick-to: 6.2 6.3
Change-Id: If62c073101c1d2e3d64f8cb2769d67f3b9fbeefb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The hugeQImage test loads, as its name suggests, a huge image.
At 2.5 GiB it's too big for the hard-coded 1 GiB limit on RAM
that the QNX toolchain hard-codes when it's started in QEMU.
Pick-to: 6.2 6.3
Task-number: QTBUG-100929
Change-Id: I8e8caaff7fd1dd0e648ada5df613c793f72bcf5d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Fixing documentation and removing tests.
[ChangeLog][Important Behavior Changes] The qNextPowerOfTwo()
functions now have preconditions.
Change-Id: If6d5e8bee66826910e89be7cac388a1f0422ebfd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
More mindless coding-style conformance. Includes moving & or * to
after the space, not before, in declarations; and spaces after commas.
Change-Id: I221fef1e4de69d6c55d33dfc533aa74e2fd72df0
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
With one exception: in a macro-definition with a backslash-newline
immediately following the open-parenthesis.
Change-Id: I0fc8d7492676402636785d571e4667881334af6a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Simply if (!condition) QSKIP(...) instead of having a long block
depend on the condition with the QSKIP() in its else block (which
should have had braces, as it was).
While dedenting the code block, tidied up spacing: only include blank
lines where they break up the code into blocks that go together, don't
leave spaces just inside parentheses.
Change-Id: I0196150088be88a7c6073b997a315b8f14d5f392
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Use QVERIFY() rather than comparison to true; QVERIFY() the negation
rather comparing to false; prefer QCOMPARE() otherwise for
comparisons, except for a few special cases involving very long
strings. Fix up the phrasing of a few QSKIP()s in the process.
Also, QCOMPARE() can handle an enum as expected value without
int-casting.
Change-Id: I9a1b82e5f4e10df6427bcc184b7757737df7db4f
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
In some cases by adjusting where the splits happen within concatenated
strings.
Change-Id: I4cffc41cda4582654151ba45d1478285caee7c81
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Prefer pre-decrement over post-decrement, turn a while into a for,
Don't put a while's body on the same line.
Change-Id: I5653a9bcec7901d205a91927c4b08e3dc13e0ca6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reflowed some over-long ones, fixed some typos, capitalise starts of
sentences (and end them with suitable punctuation). Removed one as
redundant, made another pair redundant by changing the code (use an
overt NaN instead of commenting that it's happening). Prefer C++-style
when single-line. Don't pretend to be QDoc comments, or have other
eccentricities about start-markers.
Change-Id: I5a30e1b22a08866124f09060bb35f5bd27cd443b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Much of the test code simply had a blank line after each check. Keep
the ones that separate groups of related statements, but remove the
ones that separated members of such groups. In some cases swap a blank
line and a code line to put the code with things it relates to.
Change-Id: Ie33863080d407898b2b2f044599398980ab9793d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Split some long declarations of two variables in one line into two
separate declarations. Made more things const, made some consts
constexpr. Skip a variable entirely when it's only used once (and not
giving us some other benefit). Moved some declarations closer to their
variables' first uses.
Replace some Capitalised variable names with lower-case ones.
Change-Id: I3b8dac46530ba1c2e6100cb007b5487253304526
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It saves the conversion to UTF-16 until the formatting. Split up long
lines, purge spaces just inside parentheses, and otherwise tidy
affected lines. Don't use backslash-newline for line continuation
within string literals; juxtaposition is cleaner.
Change-Id: I9c3d3e33f5ecbdb530538679147f7bc32afbeb05
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It's terser and cleaner to read. Likewise for
QString::fromLatin1(). QCOMPARE() can take a QStringView, hence u"..."
as its expected string; other uses need u"..."_qs.
Change-Id: Iaf96569ff3ce69c890badfb6e40f702a78b100b3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Marc alleges it is more efficient.
Corrected part of a message to be more accurate in the process.
Save some casting by using suitable format specifiers.
Change-Id: Ic31a4e17b8910d35781a494ec860c7a08f08f33b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When the format is an ASCII string, there's no point widening it to
UTF-16 before the actual formatting step. Also, don't construct the
format string using string arithmetic, when passing another parameter
to arg() will do just as well. In the process, restructured
generic_data(), split long lines and conform spacing to Qt coding
style on affected lines. Simplified initialization of two string
fragments by using QL1S instead of QString, too.
Change-Id: Ib101dcf9296cc532291518bcef8e0a8de597b8a0
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
In tst_qguiapplication and tst_qcoreapplication,
the application version should be set. On Android, this
is done using QT_ANDROID_VERSION_CODE.
Pick-to: 6.2 6.3
Change-Id: I6b473ad25092fb24df9400e0ab8fbb8ea4edbb6a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Tests are run for QNX in qemu similar to b2qt currently (using offscreen
plugin and software rendering). So the issue is same.
Pick-to: 6.2 6.3
Task-number: QTBUG-100930
Change-Id: Ie973c6c611ac48703fd7cce53925940b80858bc8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
on Wayland
Task-number: QTBUG-100891
Pick-to: 6.3 6.2
Change-Id: Iadf12364ded4549988ad75a9487c7e96e963a956
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Scroll tests relied on having a small window. On Android, the
window can not be smaller than the screen.
This patch changes the tests so that the windows have large
enough content so scrolling can happen.
Fixes: QTBUG-87408
Pick-to: 6.2 6.3
Change-Id: I26a444518fd934527089297c594673937f0ecf88
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
tst_qabstractitemview requires a movable cursor.
This patch skips the test if there is no movable cursor.
Pick-to: 6.2 6.3
Fixes: QTBUG-87400
Change-Id: I4e917b2ad062ce068f23603410aa9209edb9828d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Issue introduced by commit 465701bb98.
[ChangeLog][QtCore][QMetaObjectBuilder] Fixed a bug that would cause
addProperty() to use the incorrect type for the property if the
property's name matched a valid type registered with QMetaType.
Pick-to: 6.2 6.3
Change-Id: Ic15405335d804bdea761fffd16d402f2c9611f30
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Inline the content to avoid a round-trip through qjsonarray.cpp and
qjsonobject.cpp.
This change revealed an inadviseable unit test check that dereferences
the end() iterator to get its type. I haven't changed it, but have
marked with ###. I also fixed a likely copy&paste mistake in that test.
Change-Id: I89446ea06b5742efb194fffd16bb774f3bfbe5f5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Commit 35adb74ddd ("Reimplement JSON
support on top of Cbor") accidentally forgot to multiply by 2 the index
stored in the QJsonObject::iterator. The same mistake was propagated
when QJsonObject::iterator was converted to QJsonValueRef. This had no
ill effects because the o->elements container would always contain more
elements, but it meant the check was ineffective and meant nothing.
So instead of doing nothing when the iterator does not point to this
container, simply assume it does. Bad things will happen if you try to
erase an iterator that points to another container, but that's true for
almost all container/iterator mechanisms.
Drive-by modernization of some of the surrounding lines.
Change-Id: I89446ea06b5742efb194fffd16bb7c322c2fc4f2
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The 0x10000 limit should not apply if the key is a valid index in the
array.
Change-Id: I5e52dc5b093c43a3b678fffd16b6a2a5a69acd61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
I screwed up when I wrote QCborValueRef by not having the ConstRef
type. The code worked, but it wasn't const-correct, allowing you to
write:
const QCborArray &arr = something();
*arr.begin() = QCborArray();
This mistake was brought over to QJsonValue in Qt 6.0, so it has to be
fixed for QJsonValue too. The actual fixes are in the next couple of
commits.
This change is believed to be binary-compatible: the Q{Json,Cbor}ValueRef
classes continue to have the exact same size, except that they're now
empty and have a new base class. They weren't trivial before this commit
doesn't change that.
[ChangeLog][Potentially Source-Incompatible Changes] The iterator
classes for Qt's JSON and CBOR containers (array and map/object) had a
const correctness issue which allowed a const_iterator to mutate the
container being iterated on, even if that container was itself const. Qt
6.4 has a fix for this, but will cause compilation issues where
QCborValueRef and QJsonValueRef were used where the correctness could be
violated. To keep code compiling with both 6.3 and 6.4, either change to
non-const iteration or replace the QxxxValueRef with a const QxxxValue
reference. This change is binary-compatible.
Change-Id: I5e52dc5b093c43a3b678fffd16b6063333765ae0
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The flag IsContainer was not set, causing the QCborContainerPrivate to
become confused.
This commit also expands and subsumes the existing test for QCborValue
(non-Ref).
Change-Id: I5e52dc5b093c43a3b678fffd16b6a17c6f4a0676
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This has found several missing const qualifications, a missing
QCborMap::Iterator method, and a missing one in QCborValue too.
The methods "### TEMPORARY" in this commit are actually removed in two
commits.
Change-Id: I5e52dc5b093c43a3b678fffd16b6939f62954dc4
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
- New testcase tst_eventdispatcher added under commit d292f0143f.
It shows that only glib implementation works correctly.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I7b861a6207fcb319de362645fc8f00a8ab6cd4b9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Single-line bodies of single-line controls don't need braces.
If one block of an if/else chain needs braces, the rest get them too.
One long condition needed a split that forced its body to need braces.
Change-Id: Ic4116b1273e16a586fdec18e6d8228e48a9cb07c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This saves repetition of the call in the midst of query strings.
This incidentally makes it possible to give informative names.
In the process, build those query strings using QLatin1String::arg(),
instead of implicitly converting ASCII strings to QString in order to
then do arithmetic with them, at least when the arithmetic involves
more than one addition. In one instance, where two branches did the
same thing with different format strings, limit the branching to
selecting which string to use, then do the common thing once.
Change-Id: I60fd7457a727bcc3872d3052d8fd638ebaf36ac2
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Use initializer lists rather than << entries.
Use arrays where we don't need the lists at all.
Make them const when they can be.
Replace foreach with ranged-for.
Use auto rather than naming iterator types and save end() at the start
of the iteration to save re-requesting it each time round the loop.
Reverse arguments to a QCOMPARE() as actual should come first and
expected after, not the other way round. Change some casts from
C-style to type-as-function-style, use QString literals rather than
C-string literals that would need conversion at compile time and
QLatin1String::arg in preference to arithmetic where the same format
is duplicated.
In the process, reworked one test to put its two iterations, one over
good query strings, one over bad ones, into separate blocks using
separate const arrays, instead of reusing a list with an uninformative
name.
Change-Id: I4a272be3eb58e9dca136238277b92379d6ca076d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The loop used an int counter that was initialized from a size_t,
provoking a warning from MSVC. Since the indexing is irrelevant in any
case, use a ranged-for loop. Since the loop was formerly in decreasing
index order, reverse the table being iterated so that entries remain
in their prior order.
Change-Id: I79b93c5a3f39a502b0cae83215b8e3665d0e17f5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QtGui][QDesktopServices] URL handlers that have been passed
to setUrlHandler() must now be removed by calling unsetUrlHandler()
before they are destroyed. Relying on the handler's destructor to
implicitly unset it is now deprecated, because it may already be in use
by concurrent openUrl() calls. Support for implicit unsetting will be
removed in 6.6 and, until then, a qWarning() is raised if it is
exercised.
Fixes: QTBUG-100775
Fixes: QTBUG-100779
Pick-to: 6.3 6.2 5.15
Change-Id: I0c4f91b78f847b135fdeb38766babc892bdc1379
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
tst_qcoreapplication.cpp is used both in tst_qcoreapplication and
tst_qguiapplication. To distinguish these two compilations,
the define QT_GUI_LIB was used. This led to an error on Android,
where Qt::Gui is always linked, because the Qt Android Platform
Plugin needs it.
This patch introduces the preprocessor define QT_QGUIAPPLICATIONTEST
which is to be used only in the compilation of tst_qguiapplication.
This is then used instead of QT_GUI_LIB.
Change-Id: Ifa5bfacb197d68365288c1da85573106515fc6c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If adding a QLineEdit to a QGraphicsScene as a QGraphicsProxyWidget, the popup
completion of that QLineEdit is drawn in the wrong location. When the completer
getting the rect of screen, it gets the rect of the QGraphicsScene where
QLineEdit is located rather than the rect of the screen, resulting in an error
in the following calculation.
Note that as long as the completer popup is a toplevel widget not parented
to the target widget, it will not be automatically embedded into the graphics
view via QGraphicsProxyWidget. So with multiple views for a scene, or in views
that use transformations, the geometry will still be off.
Pick-to: 6.3
Task-number: QTBUG-20531
Change-Id: If5d8a707ca35a9e4709117b077978145c6143e46
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_QFutureWatcher was deactivated for Android. This patch activates it.
Fixes: QTBUG-88136
Change-Id: Iead82e22d73eb15c9ecd2756eb33925910bbffc0
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
- current INTEGRITY development pack don't support denormals for float and double.
All values are rounded to 0.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: Iaaacdc4210c7ac2ec3ec337c61164a1ade0efb01
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... which implements or assumes something about the
broken^Wnon-STL-compliant insertion behavior.
Once this has integrated into all module dependencies, we can
re-implement these APIs using STL-compatible semantics.
Task-number: QTBUG-100092
Change-Id: I54f4f5ce7addd9543866d2c399f48aff50983b88
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Even QtCore alone cannot be built without the properties feature since
Qt 5.5. While fixing this is easy, other modules like dbus,
networking are also using QObject::property() and friends liberally.
All in all I doubt that anybody will miss the feature (otherwise it
would have been fixed in the last decade).
Change-Id: Iaf3cc20bda54ee2ff3b809fac8fa82b94ecc88c0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The macOS standard library doesn't have std::contiguous_iterator yet, and
it doesn't seem like libc++ has it either.
Checking __cpp_lib_concepts for the C++20 official version appears to work.
Pick-to: 6.3 6.2
Change-Id: I8c31cd64de24c03b3a3f37cb393bb2f9b55a834d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Remove Integrity and Android specific code that explicitly adds
test data to the resource files. qt_internal_add_test functions
implicitly adds test data to resources for Android and Integrity
platforms by default.
Change-Id: Ia1d58755b47442e1953462e38606f70fec262368
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Size a QMdiSubWindow is no real toplevel widget, QLayout::activate() did
not properly set the minimum size based on it's children. Fix this by
treating a QMdiSubWindow as a toplevel widget during the calculation.
Fixes: QTBUG-100494
Change-Id: Ia2e6c519c7214c36383facd244711bd932231d40
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If one calls setPlainText("") before setting a placeholder text,
the placeholder visibility is not updated, and the placeholder is not
visible. Fix it by updating placeholderVisible properly.
Fixes: QTBUG-96212
Pick-to: 5.15 6.2 6.3
Change-Id: I1bd3f0cb4c59973a847bcf3787e35d7c17b6d673
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In one case, cast an int to qsizetype rather than the other way round,
in order to compare them.
Change-Id: Id8dffe61f9565040f1a5ee24867956397f814a55
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Some of the else if lines exceeded 100 characters, so should have been
split; and some lines already were split. So each whole chain should
have had braces on its bodies. Instead make it a switch, as this makes
it more evident what's going on in any case. Furthermore, as each
branch did the same thing with dbType-specific strings, change to just
setting QLatin1String variables, so that the rest of the code needn't
be duplicated in each branch; it can simply be done once after the
switch, using the string's .arg() to embed fragments. In the process
break up the SQL query strings more gracefully, purge spaces just
inside C++ parentheses.
Change-Id: Ie26166e098ad74720bb6d7c4d9fe47718c33a13c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Telling us the condition tested should have been true is what
QVERIFY() does anyway, so don't go to the whole trouble of saying the
same thing - and wrapping it in in a QString() merely in order to then
qPrintable() it back out again, pointlessly converting a C-string to
unicode and back again.
At the same time, skip one other qPrintable(QString("...")) without
.arg() formatting; and change the check it's the message for to use
QL1S::arg() instead of QString::arg().
Change-Id: Ie71a79da8017916d301a38b69fc422e55a5a3649
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Expected warnings are clutter for anyone reding the output, so
suppress them when they're correct behavior.
Change-Id: Idf47ba4fab8069237067d9b20afef3041e0c2f8c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Doing the tidy-up after the last check has the problem that it gets
skipped if any check fails, as the premature return skips the tidy-up.
In the process, added the missing tidy-up to prematureExec().
Repackage the code for one tidy-up as a named lambda so that the
duplicate can share it with the scope guard. Made some existing scope
guards const, while I was about it, so that the one that isn't -
because it gets dismiss()ed - stand out.
Change-Id: I96d6834d5d7675f15018169a7093b0211db6f8a9
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Raster pipeline is not supported on webOS OSE: trying to use it causes
an exit(1).
Fixes: QTBUG-100654
Pick-to: 6.3
Change-Id: I00325fc1330a2d0d4abfdee054343ecfac767309
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
[ChangeLog][Potentially Source-Incompatible Changes] The qtextstream
header no longer includes <QString>, <QStringEncoder> and
<QStringDecoder>. Code which relied on the implicit inclusion of those
classes might now need to include the headers explicitly.
Task-number: QTBUG-97601
Change-Id: Ifb8c8452026195a772c0588dbbbc53fb51cac548
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It only stores one layer of state, and pausing twice in a row will just
overwrite the previous state. This doesn't happen often but can happen,
especially on Windows if a certificate needs to be looked up in the system
certificate stores (socket gets paused) and then a recoverable error
occurs in QNAM (socket gets paused again).
Fixes: QTBUG-100362
Fixes: QTBUG-63196
Fixes: QTBUG-98476
Pick-to: 6.3 6.2 5.15
Change-Id: Ie524c48e11b6fa8010b78cc1bf3931efe2ce3351
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
No need for a virtual do-nothing destructor in a class that isn't
inherited from. Defining an empty init merely makes QTest go to the
trouble of calling it, which it could just as well skip.
Change-Id: Ifd44c473c05fdeaaa7923d2ccdd0a13c8921b6bd
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The offset fields for tst_QTimeZone::specificTransition() had a
comment claiming they are in minutes; they are in fact in seconds, so
fix that. At the same time, Moscow hasn't had a time-zone change since
2017, so the end-date for one of the test intervals can be nudged a
little closer to the present without harm.
Change-Id: I66822cb758f7e00d6added801466a6745be3e31a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Unless "." (or the empty string) is in $PATH, we're not supposed to find
executables in the current directory. This is how the Unix shells behave
and we match their behavior. It's also the behavior Qt had prior to 5.9
(commit 28666d167a). On Windows, searching
the current directory is the norm, so we keep that behavior.
This commit does not add an explicit check for an empty return from
QStandardPaths::findExecutable(). Instead, we allow that empty string to
go all the way to execve(2), which will fail with ENOENT. We could catch
it early, before fork(2), but why add code for the error case?
See https://kde.org/info/security/advisory-20220131-1.txt
[ChangeLog][Important Behavior Changes] When passed a simple program
name with no slashes, QProcess on Unix systems will now only search the
current directory if "." is one of the entries in the PATH environment
variable. This bug fix restores the behavior QProcess had before Qt 5.9.
If launching an executable in the directory set by setWorkingDirectory()
or inherited from the parent is intended, pass a program name starting
with "./". For more information and best practices about finding an
executable, see QProcess' documentation.
Pick-to: 5.15 6.2 6.3
Change-Id: I54f205f6b7314351b078fffd16cf7013c97ee9fb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In C++20, any given relational operator is also considered in its
reversed form, so e.g.
given op==(X, Y)
and X x, Y y, then y == x will compile, by using the reversed op(X, Y)
This, unfortunately, makes some existing asymmetric operator overload
sets ambiguous, and instead of applying tie-breaker rules, at least
Clang is warning about these.
For us, this means we need to make our overload set non-ambiguous. The
QJsonValue{,Ref} classes failed this, because they only provide the
following member-operators:
- QJsonValue::op==(const QJsonValue&) const
- QJsonValueRef::op==(const QJsonValue &) const
For member functions, there are no implicit conversions on the LHS. So
in C++17, we have a nice dichotomous overload set:
- LHS is QJsonValue -> use QJsonValue::op==(QJsonValue)
- LHS is QJsonValueRef -> use QJsonValueRef::op==(QJsonValue)
In both of these, it the RHS is a QJsonValueRef, it's implicitly
converted to QJsonValue for the call.
Enter C++20, and the reversed signatures are suddenly available, too,
which is a problem for QJsonValueRef <> QJsonValueRef, which could be
resolved, as in C++17, using
lhs.QJVR::op==(QJV(rhs))
or it could now be
rhs.QJVR::op==(QJV(lhs)); // reversed
Says Clang 10:
tst_qtjson.cpp:990:5: warning: ISO C++20 considers use of overloaded operator '==' (with operand types 'QJsonValueRef' and 'QJsonValueRef') to be ambiguous despite there being a unique best viable function [-Wambiguous-reversed-operator]
CHECK(r0, a0, r1);
^ ~~ ~~
qjsonvalue.h:189:17: note: ambiguity is between a regular call to this operator and a call with the argument order reversed
inline bool operator==(const QJsonValue &other) const { return toValue() == other; }
^
A similar argument makes op!= ambiguous.
Says Clang 10:
tst_qtjson.cpp:988:5: error: use of overloaded operator '!=' is ambiguous (with operand types 'QJsonValueRef' and 'QJsonValueRef')
CHECK(r0, r0, r1);
^ ~~ ~~
qjsonvalue.h:190:17: note: candidate function
inline bool operator!=(const QJsonValue &other) const { return toValue() != other; }
^
qjsonvalue.h:189:17: note: candidate function
inline bool operator==(const QJsonValue &other) const { return toValue() == other; }
^
qjsonvalue.h:189:17: note: candidate function (with reversed parameter order)
To fix, provide the missing operators as free inline functions (so Qt
6.2 and 5.15 don't get new symbols added) so there's always exactly
one best match.
This is a fix for 6.2 and 5.15. At the time of writing, 6.3 isn't
released, yet, so there, we could QT_REMOVED_SINCE the pre-existing
member operators in favor of hidden friends (as per QTBUG-87973).
Use C++17'isms to prevent an automatic merge to 5.15, which requires
contains(QT_CONFIG,c++2a):CONFIG += c++2a
added to tst_qtjson.pro.
[ChangeLog][QtCore][QJsonValue] Fixed relational operators to not
cause warnings/ambiguities when compiling in C++20.
Pick-to: 6.3 6.2 5.15
Change-Id: Ic70f3cad9987c87f7346d426c29cc2079d85ad13
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends d42cfeb84f, which would result in
infinite recursion when the Edit menu was populated and added to the
menubar after the menubar has been shown.
Add a macOS-only test case that reproduces the crash without the fix.
Fixes: QTBUG-100441
Pick-to: 6.3
Change-Id: I018a7aa7f01558a3b9732b4d6d96a911dc7fbd19
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The value of __cplusplus has nothing to do with whether the library
implements wg21.link/P1115 (libstdc++ even before C++20) or not
(libc++, even in C++20).
Use the idiomatic check (#if defined(foo) && foo >= x) instead,
fixing the Android build.
Pick-to: 6.3 6.2
Change-Id: I11bcefe455a1f13865c15d4beecbd3fe32115328
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
moc, qmake, rcc, and uic tests execute corresponding tools inside
the test executables. This adds dependencies explicitly, to execute
tests using _check targets, without the need to manually build
dependencies.
Pick-to: 6.3 6.2
Fixes: QTBUG-98576
Change-Id: I8b989276e21199b867591f7b0f6af9204695ac13
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
CI tests for QNX are run in QEMU which does not have enough RAM
to run this test successfully.
Pick-to: 6.2 6.3
Change-Id: Idab3e8b6a1e0ae3eddf5aedb82e6784a74ae9a3a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There is a TODO for this in Qt Quick from the 6.0 times. To decide
upfront if Metal can be expected to function, or if a fallback to
OpenGL needs to be triggered (especially important with macOS virtual
machines, where, unlike any real macOS system, Metal may not be
present at all), the scenegraph calls create() and then drops the
result. The idea to make this less wasteful was back then to add a
dedicated probing function which can, possibly, perform the checks in
a more lightweight manner than full initialization. Implement this
now, focusing on Metal.
Brought to attention by QTBUG-100441: printing warnings about not
having an MTLDevice is confusing in a Metal-less macOS VM, because it
is not an actual error, only part of the probing at scenegraph
initialization. We can now avoid printing confusing warnings there.
Change-Id: Ie52c36af9224bedc3f5e4c23edb486d961c9f216
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The auto-repeat timer of QScrollBar kicks in after 50ms, so if the test
takes too long and the timer fires during the qWait call or during event
delivery, then we might get multiple valueChanged emissions.
Detect that scenario and allow the test to XFAIL if things take
a significant time (more than 40ms vs the expected 1ms).
Pick-to: 6.3 6.2
Change-Id: Ie90aadc62372397db695fd2b34fe1f5252ce8d37
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
As with QHoverEvent, it's better to require globalPos rather than
"initialized to QCursor::pos(), which may not be appropriate" as the
docs have pointed out for many years now. This removes the remaining
calls to QCursor::pos() in event constructors.
Task-number: QTBUG-52430
Task-number: QTBUG-69433
Task-number: QTBUG-100324
Change-Id: I076dae56f37abaad7085cc95dddee453a80a45f3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Use alternative method for finding searchPath since
QT_TESTCASE_SOURCEDIR did not point to a correct location on webOS
QEMU test environment.
Fixes: QTBUG-99954
Pick-to: 6.3
Change-Id: I05f95b4aa02027976036d0842ca564a602e01d0e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
When QCborValue referred to an empty array or map, toArray() and toMap()
would respectively return the default value instead of the empty object,
as expected.
Pick-to: 6.2 6.3
Change-Id: I5e52dc5b093c43a3b678fffd16b60456d0037ad7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Switched to use runtime path instead of compile time path for the
helper executable. Some tests cases were failing on webOS because of
wrong path.
Fixes: QTBUG-99846
Pick-to: 6.3
Change-Id: I566bc04bdb96ac6e7dd0a875eadb50685aef8282
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It leaves the system in a state that breaks at least one later test,
so put it last. (This was first seen when picking back to 6.2, but I
am now able to reproduce it on dev.)
Amends commit 78eac57f3d
Pick-to: 6.3
Change-Id: I918cf43cdfc27357329a175518d6f9755747bae5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The QSinglePointEvent ctor assumes that the given globalPos is correct,
so it was wrong that the QHoverEvent ctor passed along a local position
as global. It's better to require globalPos as an argument; and in fact
it seems that everywhere we construct a QHoverEvent, global position is
available, or possible to get by transformation (which is better than
resorting to QCursor::pos()).
Also, don't convert to QPoint: pointer events have qreal resolution and
there's no reason to truncate them.
Fixes: QTBUG-100324
Change-Id: I919455da36265988d3d149eb97563c9ed0d2c660
Pick-to: 6.3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
On X11 we already had to wait as window managers might scroll windows
in. On macOS we also waited - albeit a bit shorter - also because
screens scroll in slowly.
We didn't wait on Windows, and on Windows the test is quite flaky.
Attempting to make it run stably by waiting for long enough so that all
paint events are flushed to the screen.
As a drive-by, break some overly long lines.
Task-number: QTBUG-100412
Pick-to: 6.3
Change-Id: I49b1e447aced2fe1af3c5d30b514f8df3cc1813c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A default-constructed QPluginLoader erroneously reports that the
load hints are empty. However, setting a filename would then
automatically set the PreventUnload hint, surprising the user.
Return the correct flags instead.
Amends 494376f980
Change-Id: I7a95964cb680afd3adf2f71ed73d2f93023238f2
Fixes: QTBUG-100416
Pick-to: 5.15 6.2 6.3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When running a test under increased verbosity levels, QTestLib would
print "failure location" for every QTest function (QVERIFY, QCOMPARE,
...), even if there's no failure at all.
Keep the code centralized, but split the formatting of failures and
non-failures (other messages).
Task-number: QTBUG-96844
Change-Id: I3c508653176b68579dc0eb0cffcc153a52da2e2c
Pick-to: 5.15 6.2 6.3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
While investigating an assertion failure I noticed that the existing
tests didn't even exercise these methods for local time or zone time.
Of course, we can't robustly test these time-specs, due to vagueries
of offset details and zone availability, but we can at least verify
that they return date-times on the specified date. Add a test-case for
the start of 1900, on which the assertions were first seen; it is the
earliest moment representable with tm_year >= 0, after all.
One of these tests fails on 6.2 but the fix for that (as opposed to
the the assertion) requires 6.3's improvements to the handling of
time_t's fuller range - too risky a change to pick back to 6.2.
Pick-to: 6.3
Task-number: QTBUG-99747
Change-Id: I98f5d7850a701972b2d8ea2ce203a2b3e7071354
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qt_internal_undefine_global_definition disables an internal global
definition that is defined by the qt_internal_add_global_definition
function for a specific target.
Remove the ability to set the custom "undefine" flag for the
definitions since it's hard to control it using the introduced
function.
Pick-to: 6.2 6.3
Task-number: QTBUG-100334
Change-Id: Ic1637d97aa51bbdd06c5b191c57a941aa208d4dc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Not MSVC, but pretends to be.
Pick-to: 6.3 6.2
Change-Id: I5c201dd917e79a22d6ef15715bf1d3a7010d123e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In 63eea5e5c69434871eaef9d9dc7184d7e54d7276, the
Qt::ItemNeverHasChildren flag was introduced. QFileSystemModel
was modified to use this flag for items which are not directories,
but only if the QFileSystemModel is not read-only and
the directory is writable.
This patch modifies QFileSystemModel to use the ItemNeverHasChildren
flags also if the model is read-only and if the item
is read-only.
Amends 63eea5e5c69434871eaef9d9dc7184d7e54d7276
Change-Id: Ie7f7d58ecf7baade93f9f03d120da84d3c005d42
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Amends e3b2b12a91, which made the
style sheet calculate the font-dependent text size, but didn't
add the space needed for the close button or a tab icon.
QTabBar's layout code already adds the space needed for icons
and margins to the size; so instead of overwriting that size,
subtract the size needed by the normal font, and then add the
size needed for the font form the style rule, considering both
vertical and horizontal tab bars.
Fix the test case to style only one tab rather than the entire
tab bar, otherwise the font is applied to the entire tab bar,
and not just to a specific tab, which is the style sheet style
code in question.
Pick-to: 6.2 6.3
Task-number: QTBUG-6905
Change-Id: Ieed0ba146a32e81229419adecaf41f467cfd5959
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Task-number: QTBUG-100362
Change-Id: Ib09aec5ea03867163d476a2c92562bc949fc1b1a
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The code was trying to avoid a detach in the case no element needed to
be removed, by first running find_if() on const_iterators, and then,
after converting its result to (mutable) iterators, start the
remove_if() algorithm where find_if() left off.
But this applies the predicate to the element found by find_if() (if
any) _twice_: first just before we exit the first find_if() and then
just as we enter remove_if(), which will start by running find_if()
again, with the result of the initial find_if as 'first'.
Apart from being needlessly inefficient, this violates the
specification of Uniform Erasure, which defines sequential erase_if()
as being equivalent to remove_if() + container erase(), with the
former being specified to apply the predicate exactly once per
element.
Fix by writing the remove_if() part by hand.
Instead of doing the dance with the loop invariant documentation
twice, simply implement erase() via erase_if() (complicated a bit by
the weird passing of predicates by lvalue reference instead of by
value, as would be idiomatic). This exposes users to:
[ChangeLog][QtCore][Potentially Source-Incompatible Changes] A fix in
the implementation of the erase-like algorithms of sequential Qt
container may re-enable signed/unsigned comparison warnings previously
suppressed by having occurred in std library code. To fix, cast the
value to look for such that it has the same signedness as the
container's elements.
... but the issue would be the same had we inlined std::remove()
instead of passing a lambda to sequential_erase_if(), so it's nothing
we can, nor should, work around.
[ChangeLog][QtCore][Containers] Fixed a bug in the implementation of
most sequential Qt container's erase-like algorithms (member
removeAll()/removeIf() and free erase()/erase_if()) where the equality
operator or the predicate, respectively, was applied to the first
matching element twice. Each element is now tested exactly once.
Pick-to: 6.3 6.2
Change-Id: Ib6d24b01b40866c125406f1cd6042d4cd083ea0d
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Some calling code did this beforehand, other didn't. Now, the function
itself checks for an existing handler before doing anything else.
Change-Id: I8fc43fb8788c9dfe825b15ffa2fa69ee43915cd6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Restore the 'QT_NO_JAVA_STYLE_ITERATORS' and
'QT_NO_NARROWING_CONVERSIONS_IN_CONNECT' definitions for Qt
targets.
Add the function that adds global definitions for Qt targets according
to the provided scope and the target property-based switch to disable
the definition for a specific target.
Pick-to: 6.2 6.3
Task-number: QTBUG-100295
Change-Id: I28697e81f9aabc45c48d79aae1e5caea141e04e1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If the signal passed to QtFuture::connect() takes multiple arguments,
we need to wrap the arguments in a std::tuple when reporting the result.
To detect this case we were checking if the result type of a QFuture
returned by QtFuture::connect() is a std::tuple, but this was not
correct: the result type could be a std::tuple also if the passed
signal takes a single std::tuple argument. Instead, check if the signal
takes more than one argument.
As a drive-by modified the tst_QFuture::signalConnect to use const
values for tuples used in multiple test-cases, to avoid repetition.
Fixes: QTBUG-100071
Pick-to: 6.2 6.3
Change-Id: I1ce39cf87028f36ef94a9d1a4423b0c51473afd4
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test was already blacklisted for Windows 10 and Windows 7. Now it
is flaky on Windows 11 as well.
Blacklist it for all windows platforms.
Task-number: QTBUG-98478
Pick-to: 6.2 6.3 5.15
Change-Id: I870fb6ce80cfe244a76d08bf40677fdb6becab97
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The IGNORE directive was likely removed as an oversight
in the linked change.
This fixes the test to pass when bumping the Qt version.
Amends 9836dbd6ee
Change-Id: I497325d6d8b8b67cce7b0840bfb9bfa70d85fe73
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
From the API review.
Pick-to: 6.3
Change-Id: Ic05737db79327e7811fcd974a70914b837e06601
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test also fails on Windows 11
Pick-to: 6.2 6.3
Task-number: QTBUG-98475
Change-Id: Iab079587d743500d222f2272d1145424e079b4a3
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Update Catch2 header to latest released version. Needed
to build correctly with glibc 2.34.
Two patches applied on top of the upstream release. Previously
used Qt specific change extracted to a separate patch file.
Fixes: QTBUG-95842
Pick-to: 6.3 6.2
Change-Id: I67e442bbe756ff00c96a45eabf593f7aecddd628
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add a level of indirection via void_t such that
struct is_transparent {};
works, and not just
using is_transparent = <unspecified>;
Pick-to: 6.3
Change-Id: I3ca2af6a07e6989dc95abc10fb2d0078a5269e5b
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The test has been XPASS'ing recently on Android.
Reverts 67e209f59f.
Fixes: QTBUG-69216
Change-Id: Ic629cc28936e0ef27277c243717e97226bf01b1c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
- It should not be built for systems without process feature.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I71caa59c2168435894c7d1afcc8226e44178439f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If id == 0, then we should grab the specified rect from the screen.
To do that, find all windows intersecting with the screen geometry, and
compose their backing store images into a screen-size pixmap.
Otherwise, find the respective backing store and grab only that.
Remove the old code respecting the desktop widget, which is no longer a
thing in Qt 6. The code was also wrongly grabbing only the first
containing - not intersecting - window's backing store into the screen
pixmap.
Enable the QScreen::grabImage test for the offscreen platform, where it
now passes.
Task-number: QTBUG-99962
Change-Id: I16eca7b082d65095a62c73624f86a4423e997a7a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QSqlQuery::exec() took for granted that it can dereference driver(),
which should be true for all sane usage; however, it should not crash
if used misguidedly. Added regression test, based on bug report's
reproducer, which crashes without the fix.
Fixes: QTBUG-100037
Pick-to: 6.3 6.2 5.15 5.12
Change-Id: I94600bc60f89e82a1121b418144006a683921a38
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
577d698b8e changed QString::isUpper /
isLower behaviors to match Unicode semantics: a string is uppercase
if it's identical to its own toLower/toUpper folding. These semantics
come from Unicode so they're not up for debate.
That commit however left QByteArray untouched. Generally speaking, we
want to move away from QByteArray as "text storage" -- this has
partially happened between Qt 5 and Qt 6, where QByteArray went from
Latin-1 semantics to ASCII semantics. Still, QByteArray offers
toUpper/toLower and isUpper/isLower and all this family of functions
should be consistent in behavior.
Apply the same fix that was applied to QString.
[ChangeLog][Important Behavior Changes] The semantics of
QByteArray::isLower() and QByteArray::isUpper() have been changed. Now
lowercase (resp. uppercase) byte arrays are allowed to contain any
character; a byte array is considered lowercase (resp. uppercase) if
it's equal to its own toLower() (resp. toUpper()) folding. For instance,
the "abc123" byte array is now considered to be lowercase.
Previously, the isLower() (resp. isUpper()) functions checked whether
the byte array only contained ASCII lowercase (resp. uppercase)
characters, and was at least 1 character long. This had the side effect
that byte array containing ASCII non-letters (e.g. numbers, symbols,
etc.) were not lowercase nor uppercase.
[ChangeLog][QtCore][QByteArray] QByteArray::isLower() and
QByteArray::isUpper() now work correctly with empty byte arrays. The
semantics of these functions have been changed.
Pick-to: 6.3 6.2
Fixes: QTBUG-100107
Change-Id: Id56a42f01b2d1af5387bf0e6ccff0f824f757155
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is an issue for QQuickWindow in practice, although it is not hit
by our current tests.
Pick-to: 6.3
Change-Id: Ia73704c1af6a82b2689ce7b844d3b0eb9a17ec18
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
QThreadPool automatically deletes the runnable after it finishes running
the task. In case QThreadPool is nullptr, we should delete the runnable
manually. This amends 87b93c29be.
Pick-to: 6.3 6.2 5.15
Change-Id: Id7e4ed3d4d6de05990edf62e4099852983debc64
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The class is not intended for inheriting from it (see also
e502906305), so we can mark it as final
to explicitly forbid this. The tests were still using it as a base
class to clean the results during destruction, so fix them accordingly.
Task-number: QTBUG-99883
Pick-to: 6.3
Change-Id: I4a7ee3e2b462bd704e4b5a95ed733144805d6e5b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Unlike QString and QStringView, QByteArrayView and QByteArray don't
overload well.
Solve the overload issue the usual way: by making the QByteArray one a
Q_WEAK_OVERLOAD. This is trivial for QStaticByteArrayMatcher, which
isn't exported, but require QT_REMOVED_SINCE magic for
QByteArrayMatcher, which is.
The additional const char* overload has shielded us from the worst
fall-out so far, it seems, but it makes for a truly horrible overload
set:
matcher.indexIn(str, 3);
Q: Is the 3 here the length of the haystack or the value of the from
parameter?
A: It depends on decltype(str)!
If the (const char*, qsizetype, qsizetype=0) overload is the better
match, then 3 limits the haystack's length.
If, otoh, the (QByteArray(View), qsizetype) overload is the better
match, then it's the value of the from parameter.
As if this wasn't bad enough, QByteArray implcitly converts to const
char* by default!
A follow-up patch will therefore deprecate the (ptr, size) overloads,
so we de-inline the QByteArrayView ones to avoid having to touch the
implementation once more.
Found during 6.3 API review.
Pick-to: 6.3
Change-Id: I9640e0bdd298d651511adebcc85f314db9221d34
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Add a test (same techniques as for the 4+GiB check in
tst_qcryptographichash).
Takes ~1s to build the 4GiB test data here, and skips
when RAM is too low:
$ qtbase/tests/auto/corelib/text/qbytearraymatcher/tst_qbytearraymatcher haystacksWithMoreThan4GiBWork
[...]
QDEBUG : tst_QByteArrayMatcher::haystacksWithMoreThan4GiBWork() created dataset in 891 ms
[...]
$ (ulimit -v 2000000; qtbase/tests/auto/corelib/text/qbytearraymatcher/tst_qbytearraymatcher haystacksWithMoreThan4GiBWork)
********* Start testing of tst_QByteArrayMatcher *********
[...]
SKIP : tst_QByteArrayMatcher::haystacksWithMoreThan4GiBWork() Could not allocate 4GiB plus a couple hundred bytes of RAM.
Loc: [/home/marc/Qt/qt5/qtbase/tests/auto/corelib/text/qbytearraymatcher/tst_qbytearraymatcher.cpp(242)]
[...]
Found during 6.3 API review.
[ChangeLog][QtCore][QStaticByteArrayMatcher] Fixed searching in
strings with size > 2GiB (on 64-bit platforms).
Fixes: QTBUG-100118
Pick-to: 6.3
Change-Id: I1df420965673b5555fef2b75e785954cc50b654f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When int is 32-bit, 0x80000000L is int-min, and (consequently)
negating it makes no difference, so MSVC warns about this. Instead of
using an L suffix, wrap the constant in Q_INT64_C(). Do the same for
similar large constants in the same block.
Pick-to: 6.2 6.3
Change-Id: Ib371b932792f170ab7db2e472a4283df3a205af3
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The animateClick method is a QAbstractButton member, and neither
QCommandLinkButton nor QPushButton override it. The method is tested in
the QAbstractButton test, and 3a9b7d1f18648d7236664d3adfc65c009b01e668
made that test more robust. The previous, flaky version of the test was
almost duplicated here. They add no additional code coverage, so remove
them.
Pick-to: 6.2 6.3
Change-Id: I1fa988c1eabd5054193acb1f5fa1c81d29b3878d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
It was missing #if-ery on feature regularexpression for one test that
depends on it. One of its comments had a long line. Added some
annotations to make clear what's going on in messier tests.
Change-Id: I06d8748a134591f93b36029713e52ffd826a24dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Capturing a QFuture in the continuations attached to it results in
memory leaks. QFuture's ref-counted data can only be deleted when the
last copy referencing the data gets deleted. The saved continuation
that keeps a copy of the future (as in case of the lambda capture) will
prevent the data from being deleted. So we need to manually clean the
continuation after it is run. But this doesn't solve the problem if the
continuation isn't run. In that case, clean the continuation in the
destructor of the associated QPromise.
To avoid similar leaks, internally we should always create futures via
QPromise, instead of the ref-counted QFutureInterface, so that the
continuation is always cleaned in the destructor. Currently QFuture
continuations and QtFuture::when* methods use QFutureInterface directly,
which will be fixed by the follow-up commits.
Fixes: QTBUG-99534
Pick-to: 6.3 6.2
Change-Id: Ic13e7dffd8cb25bd6b87e5416fe4d1a97af74c9b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Avoid some unnecessary comparisons and add more tests.
Task-number: QTBUG-99799
Change-Id: I3aee9f0b62461d38dadbe8e969444e1cd1f94e68
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This is added specifically for the QPA platform and theme plugins, to
honor the QT_QPA_PLATFORM_PLUGIN_PATH environment variable and the
(inadvisable) -platformpluginpath command-line argument.
This removes the last QFactoryLoader used with an empty path (also the
only two that could be reached), which were causing a scan of the
application's binary directory whenever the platform plugin path was
set. In case of applications installed to /usr/bin, the entire /usr/bin
was scanned, which can be qualified as "not good".
Fixes: QTBUG-97950
Pick-to: 6.3
Change-Id: Ice04365c72984d07a64dfffd16b47fe1d22f26d3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test is timing sensitive; if it takes more than 100ms
to process events, then the timer that clicks the button might
have fired. So only verify that the button is still down if 100ms have
not yet passed, and verify that at least 100ms have passed when the
click is complete.
Also use QSignalSpy to test the signal emissions.
Pick-to: 6.2 6.3
Change-Id: I95f99e204a17c6709f8e2913eefe4b487e949123
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The current behavior for handling the angle delta of a wheel event
changes index the instant there is a change in angle delta. This works
fine for mouse wheels that send events with 120 angle delta units and
there is also already behavior defined for devices with pixel deltas,
but there is nothing good for handling events from high resolution mouse
wheels that don't have pixel deltas.
This patch makes it so that the current index doesn't change until the
accumulated angle delta for the X or Y axis reaches 120.
[ChangeLog][QtWidgets][QTabBar] Scrolling with a high resolution mouse
wheel changes the current index at a rate more like a normal mouse
wheel.
Task-number: QTBUG-97844
Pick-to: 6.3
Change-Id: I2e7fd88984a253f6ef8a0008deb7233e4cb4d84a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Commit 289f909621 ("Test conversion of
ulonglong variant to JSON") was trying to ensure the result becomes a
double. So there's no reason to make a test in the _data() function.
Drive-by fix the UB condition on Windows (ulong is 32-bit, so 1ul << 63
is UB).
Change-Id: I0e5f6bec596a4a78bd3bfffd16ca4f8f5219f785
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
It was Linux-only and now even Linux is complaining:
tst_qmetatype.cpp:421:26: warning: ‘int pthread_yield()’ is deprecated: pthread_yield is deprecated, use sched_yield instead [-Wdeprecated-declarations]
Change-Id: I0e5f6bec596a4a78bd3bfffd16cb1eadfa301f16
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
All primitive types are initialized and have been since at least commit
33cd680ddb ("New QMetaType
representation").
Change-Id: I0e5f6bec596a4a78bd3bfffd16cb1fe22dc5c8f5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When some test function fails (even as expected), it can leave the
event dispatcher in an inconsistent state where the posted events
queue might not be empty. As a result, this may break the internal
logic of the next test function that is run.
So, calling eventDispatcher->processEvents() after each completed
function resets the event dispatcher to its initial state, which
fixes the problem.
Pick-to: 6.2 6.3
Change-Id: I5a54f892d09a6eca73c8fc82875ce3b9ce4a3242
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We set the wakeUps atomic to prevent multiple WM_QT_SENDPOSTEDEVENTS from
being posted. However, this might happen right after the event processing
thread cleared the atomic, but before it processed the previous
WM_QT_SENDPOSTEDEVENTS message. In that case, we end up with a set
atomic and an empty event queue, resulting in the event loop to block
even though there are posted QEvents.
To prevent that, always reset the atomic when we handle the
WM_QT_SENDPOSTEDEVENTS message. In that case, we either call
sendPostedEvents, or startPostedEventsTimer. The former already resets
wakeUps; reset it in the latter as well.
Fixes: QTBUG-99323
Pick-to: 6.2 6.3 5.15
Change-Id: I931c02be9c42b02e8ca20daba5059cd8185f0a37
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Add two tests for some problematic scenarios where the behavior is not
consistent across platforms and depending on which event dispatcher is
used:
1) reliably waking up the dispatcher when posting events from a worker
thread.
That test fails 100% of the time on Windows no matter what type of
application is created. It passes reliably on Linux and macOS for both
core and gui applications.
2) waking up the dispatcher when we post an event from within an
event handler.
That test fails 100% of the time on Windows, both with core
and GUI event dispatchers. On macOS, the test fails 100% of the time
with the core dispatcher, and passes 100% of the time with the GUI
dispatcher. On Linux, it passes only if a Glib based event dispatcher
is used; the default Unix event dispatcher (which is also the one
used on macOS for core applications) fails.
Task-number: QTBUG-99323
Pick-to: 6.2 6.3 5.15
Change-Id: I2489533b9f0032488707777be0512bb933669a7d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Get rid of the function-static main window, which would be destroyed
after QApplication if the test is run with a subset of test row (that
does not include the TestEnd state test).
Make the MainWindow a class member of the test class instead, and rename
it from "mainW" to "mainWindow" to avoid shadowing by "mainW" widgets in
other test functions.
Amends 55928821d1.
Task-number: QTBUG-99630
Pick-to: 6.2 6.3
Change-Id: I83efce5b54afc3a0027a7c0e63efee6a235af585
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Bug introduced in 6.0. This is the only unprotected d_ptr I could find.
[ChangeLog][QtCore][QMetaType] Fixed a bug that would cause
QMetaType::compare() and QVariant::compare() to crash on invalid meta
types and variants.
Pick-to: 6.2 6.3
Fixes: QTBUG-99960
Change-Id: I0e5f6bec596a4a78bd3bfffd16cb1f7b2d146688
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Previously, if you had multiple entries with the same name in an object,
and some of them were again objects or arrays, parsing the JSON document
would leak memory.
Also, we use std::stable_sort instead of std::sort now, so that we don't
accidentally randomize the order of elements with equal keys.
[ChangeLog][QtCore][JSON] A memory leak in the JSON parser when reading
objects with duplicate keys was fixed.
Pick-to: 5.15 6.2 6.3
Fixes: QTBUG-99799
Change-Id: Ic2065f2e490c2d3506a356745542148ad9c24262
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We can handle the UTF-8 case by reinterpreting it as Latin-1.
This way, the suffixIndex stays valid as a return value.
As a drive-by, optimize away toLatin1() calls by using a QVLA.
We really need a better way of converting UTF-16 -> L1 than
qt_to_latin1()...
[ChangeLog][QtCore][QVersionNumber] fromString() now takes
QAnyStringView (was: QString, QStringView, QLatin1String)
and a qsizetype pointer (was: int pointer).
Change-Id: I86abaadba2792658fbf93ccd1e0b86e3302c697c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This completes the update to qsizetype in this class, adding a couple of
methods that need to be removed in Qt 7. They're only required where int
is not qsizetype (i.e., 64-bit platforms).
Change-Id: I0e5f6bec596a4a78bd3bfffd16c9de29bec4c637
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
qstrncmp() would stop at the first null character, which isn't correct.
The tests that had been disabled in tst_qstring.cpp (with an inaccurate
comment) were actually passing. I've added one more to ensure that the
terminating null is compared where needed.
[ChangeLog][QtCore][QLatin1String and QUtf8StringView] Fixed a
couple of bugs where two QLatin1Strings or two QUtf8StringViews
would stop their comparisons at the first embedded null
character, instead of comparing the full string. This issue
affected both classes' relational operators (less than, greater
than, etc.) and QUtf8StringView's operator== and operator!=.
Pick-to: 5.15 6.2 6.3
Change-Id: I0e5f6bec596a4a78bd3bfffd16c90ecea71ea68e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QNetworkHeadersPrivate::toHttpDate() used a custom format to output a
date-time; the format supplied GMT as suffix, but neglected to convert
the date-time to UTC, so local-time was formatted as if it were UTC,
regardless of its actual offset from it. Fixing this (by the obvious
toUTC() call) broke formatting when the supplied header value was a
QDate, since it's packaged as a QVariant and QVariant's conversion of
QDate to QDateTime uses local time's (not UTC's) start of day. So fix
headerValue() to separate QDate and QDateTime cases and use
startOfDay(Qt::UTC) to get the right start of the day. Added tests for
non-UTC date-times appearing correctly in HTTP headers.
Fixes: QTBUG-80666
Pick-to: 6.3 6.2 6.2.3 5.15
Change-Id: I2792bce14a07be025cf551b0594630260c112269
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Files that are not meant to be executed should not have the execute
permission bit set.
Task-number: QTBUG-81503
Pick-to: 6.3 6.2 5.15
Change-Id: I10666bd958adfc5c425216bcff7456facd1fe5f3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Some lines in tests had to be updated because they lost the implicit
conversion from char* to QString.
Change-Id: I95af5859ced95b9ca974205398e38c0bd4395652
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is heavily inspired by the patch written by Inho Lee
<inho.lee@qt.io>, which says "There is a precision problem in the
previous algorithm when checking pitch value. (In the case that the
rotation on the X-axis makes Gimbal lock.)"
In order to work around the precision problem, this patch does:
1. switch to the algorithm described in the inline comment to make
the story simple.
2. forcibly normalize the {x, y, z, w} components to eliminate
fractional errors.
3. set threshold to avoid hidden division by cos(pitch) =~ 0.
From my testing which compares dot product of the original quaternion
and the one recreated from Euler angles, calculation within float range
seems okay. (abs(normalize(q_orig) * normalize(q_roundtrip)) >= 0.99999)
Many thanks to Inho Lee for the original patch and discussion about
rounding errors.
Fixes: QTBUG-72103
Pick-to: 6.3 6.2 5.15
Change-Id: I8995e4affe603111ff2303a0dfcbdb0b1ae03f10
Reviewed-by: Yuya Nishihara <yuya@tcha.org>
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
In Qt 5 style sheets, objects could be selected by an enum-type property
using the integer value of the enum value, e.g
QToolButton[popupMode="1"] { ... }
In Qt 6, the the new meta type system and QVariant implementation enabled
QVariant::toString to return the string representation of the enum value
instead for a property containing an enum. Since QStyleSheetStyle's
attribute matching is string based, this breaks the Qt 5 style selector,
and QCSS code instead needs to use e.g.
QToolButton[popupMode=MenuButtonPopup] { ... }
While the new syntax is arguably preferable, this is an unintentional
change that silently breaks style sheet code (no error or warning at
compile- or run-time).
To support Qt 5-style selectors, we have to change the StyleSelector
interface of the QCssParser API so that we can pass through what type
of value the attribute extractor should return; if an integer string "1"
is provided, then we need to compare the enum integer value; if the
string provided does not represent a number, then we need to compare the
name of the enum value.
Since the pure virtual attribute() method that needs to be implemented
to extract the attribute value of the node is implemented in modules
outside qtbase, add a second virtual method that takes the entire
QCss::AttributeSelector, which includes the value to match. Extractor
implementations can use it to evaluate which type of data to return for
an exact match. The default implementation calls the old attribute()
method so that existing StyleSelector implementations continue to work.
Make the respective change in the QStyleSheetStyleSelector, and simplify
the surrounding code. Adjust other StyleSelector implemnentations in
qtbase. As a drive-by, remove the superfluous virtual declaration from
those overrides.
Once submodules are adjusted to override this virtual function instead
of the (now no longer pure) virtual attribute() method, that method can
be removed.
Pick-to: 6.3 6.2
Fixes: QTBUG-99642
Change-Id: I9a2b3498f77bf7cab5e90980b7dab2f621d3d859
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This code didn't actually use QMutableEventPoint::from(), so didn't
run into the UB that from() depended on, but it's in the way of making
QMutableEventPoint a befriendable namespace instead of a public
subclass of QEventPoint.
Replaced the QMutableEventPoint ctor that takes a timestamp, and
therefore isn't compatible with the ctors on QEventPoint, with a
static function that returns QEventPoint instead.
Port QList initialization to braced-initialization as a drive-by.
Task-number: QTBUG-99615
Pick-to: 6.3
Change-Id: If5a1dbea21cc31cdefdb640716793421c8ec0af4
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
In Qt 5, such selectors have to use the integer value of the enum
value. Using the enum value name does not work.
In Qt 6, such selectors must use the enum value by name, using
the integer does not work.
It's not clear yet what changed, possible a side effect of the
changes and improvements in the meta object system and QVariant in
Qt 6. So for now, document the difference in behavior in a test.
Pick-to: 6.2 6.3 5.15
Task-number: QTBUG-99642
Change-Id: I96e0280b191b8ca06b16a97ab3ed367e9a8f43a0
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The header no longer uses QMutableEventPoint.
Fix TUs that relied on the transitive include.
Task-number: QTBUG-99615
Pick-to: 6.3
Change-Id: Iae4ff34ea708304fcd365fd763875dd4a97a1cf8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The test is impacted by the position of the mouse cursor, and fails if
the mouse enters the test window when it gets shown. Try to move the
cursor away from the window.
As a drive-by, const'ify some of the local variables.
Revert 7b4b5115dd by removing the
blacklisting of the test on macOS in CI.
Pick-to: 6.3 6.2
Change-Id: Ia0c554fdf161fd4eb4aa3965e937c7db8ceeef8f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The test uses a static MainWindow so that we can execute a series of key
simulations on the same window. The window is then destroyed when we
reach the final test row.
If some of the tests fail, then the window is left in an unknown state,
resulting in cascading failures for the other tests. Fix this by always
trying to show and activate the window, and always destroying the static
window if we have reached the last test data row.
Fixes: QTBUG-99630
Pick-to: 6.2 6.3
Change-Id: I466669f387e8b199e9e719a7ebbe3ae670658b7e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The QDateTimeData &d it's passed is a copy that's about to be
modified; before we do so, we haven't detached so its internals have a
ref-count of two, contradicting an assertion in the non-const
Data::operator->(); so just directly access d.d->m_timezone, since we
know that spec == TimeZone implies !isShort().
Added test that triggered the assertion and now doesn't.
Fixes: QTBUG-99668
Pick-to: 6.3 6.2 6.2.3 5.15
Change-Id: I07321ad91be5adce524be18e4ab82eee7110dc6a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Do not try to test writing of image formats which are not supported on
the platform under testing. This test was failing for .ico files on
webOS.
Fixes: QTQAINFRA-4722
Pick-to: 6.3
Change-Id: Ic7d40d9751e0f921d9721c01492cca28d798e141
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Added tests for repeated skips and failures (from within void lambdas,
to simulate skips and failures from within event handlers). These
exhibit yet more ways to count more than one outcome for a test. The
new QTest::failOnWarning() can also provoke more than one failure from
a single test, and several existing selftests exhibited various ways
for the Totals line's counts to add up to more than the number of
actual tests run.
Fixed counting so that only the first decisive incident is counted.
Tests can still report later failure or skipping, but only the first
is counted.
Added a currentTestState in qtestlog.cpp, by which it keeps track of
whether the test has resolved to a result, and clearCurrentTestState()
by which other code can reset that at the end of each test. This
brought to light various places where test-end clean-up was not being
handled - due to failure or skipping in a *_data() method or init, or
a skip in cleanup.
Fixes: QTBUG-95661
Change-Id: I5d24a37a53d3db225fa602649d8aad8f5ed6c1ad
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A derived gadget has an is-a relationship with its base type. It
should be convertible. In fact, canConvert() already tells us it is.
Change-Id: I71a5ac9afd78e88adb23b4d0e757f34077f63207
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Moved tst_QImageReader::readText() and tst_QImageReader::preserveTexts()
behind QT_NO_IMAGEIO_TEXT_LOADING flag. The tests were failing on
webOS.
Fixes: QTBUG-99717
Pick-to: 6.3
Change-Id: Ib23decbaffe8d87c07fd68c41a28a3f7ca969cb1
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We want to preserve nullness where possible. Test that various ctors
do the right thing when presented with null input.
Pick-to: 6.3
Change-Id: Ia1a1d4fb3c919b4fed2d9b87827815a1b5072c54
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Any of these timers must be stopped before the corresponding test
function completes. Otherwise, functors will operate on dangling
pointers, which can lead to failures or unreliability of other tests.
Fix this by setting a correct context in the QTimer::singleShot()
call.
Pick-to: 6.2 6.3
Change-Id: Icd23f6d9a2c6e7f33495d6badc4080a1b10c19f8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
By GHS the only C locale is supported.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I3d89f1b2d9eb7f77b75e13a5ca65cebc24538890
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
At some point we decided to support a custom set of ciphersuites specified
by QSslConfiguration (which if you ask me was never a good idea). The law
of unforseen consequiences bit us again: since we now give a set of ciphesuites
to QSslConfiguration and set ciphesuites from the configuration a socket has,
we are limited by the ciphersuites we know about at the moment of 'coding'.
Meaning if an SDK was updated and CipherSuite.h later adds more ciphersuites,
we miss them and 'don't support them', while we ... actually do.
This patch tries to add some more ciphersuites introduced in TLS 1.3 (interesting,
SecureTransport does not support TLS 1.3, but TLS 1.3 suites can be used in TLS
1.2 session).
Pick-to: 6.2 6.3 5.15
Task-number: QTBUG-99368
Change-Id: I439b63845c4893e5621cffaf3bcaf62e2b643c74
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Mainly because we do have legacy code in the Qt 5 graphical effects that
tries to dynamically determine the max number of varyings. Make it
easier to port such code.
Change-Id: I846cab2c2fe7b4cd473b5ced0146ca36f1c8169b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
The CALayer backingstore never had a scroll implementation because we
were relying on the QRasterBackingStore implementation, but as it turned
out that implementation was not applicable for the CALayer backingstore.
We now implement scroll() by determining which part of the back buffer
can be scrolled directly in-place, and then scrolling the rest by
copying from the front buffer. We have to handle both cases, as clients
may scroll multiple times before flushing, and the scrolled area may
overlap both valid back-buffer content and content that needs to be
pulled from the front-buffer.
Pick-to: 6.3 6.2
Change-Id: Icc09c9488386925116779c9024669a4329b38247
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In Qt 5, QVariant::isNull returned true if either the variant didn't
contain a value, or if the value was of a nullable type where the type's
isNull member function returned true.
In Qt 6, QVariant::isNull only returns true for variants that don't
contain a value; if the value contained is e.g. a null-QString or
QDateTime, then QVariant::isNull returns false.
This change requires a follow up in the SQL drivers, which must
still treat null-values the same as null-variants, lest they write data
into the data base.
Add a static helper to QSqlResultPrivate that implements isNull-checking
of variants that contain a nullable type relevant for Sql, and add a
test case to the QSqlQuery test that exercises that code.
Pick-to: 6.2 6.3
Fixes: QTBUG-99408
Fixes: QTBUG-98471
Change-Id: I08b74a33aa3235c37d974f182da1f2bdcfd8217e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This does exactly what insert() on Qt associative containers does, but
allows to express the intent of using the STL-incompatible Qt insert()
semantics, in an STL-compatible way, instead of leaving the reader of
the code wondering what semantics are expected.
This is part of a very-long-term goal of fixing Qt associative
container's insert() behavior, in which QFlatMap, being an affected,
but private-API type, is used for proof-of-concept purposes.
Task-number: QTBUG-99651
Pick-to: 6.3 6.2
Change-Id: I69010285438259918aef659d3235180c1b5be696
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We use raw pointers to the Nodes in the QHash which is
inherently fine, but we are then subject to invalidation when
nodes are moved around during deletion.
In trim() we don't actually need to iterate the linked-list
since the node we are interested in is always chain.prev
Pick-to: 6.3 6.2 6.2.3
Fixes: QTBUG-99710
Task-number: QTBUG-99224
Task-number: QTBUG-99240
Change-Id: I9c2ed69b29e3cadca013113a3553deb44d7382fc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
setPos() takes a screen argument, however this argument
indicates which cursor should be moved only and is
not usable as an argument to toNativePixels() since
the position may be on a sibling screen.
Add call to QScreen::virtualSiblingAt to get the target
screen.
Task-number: QTBUG-99009
Pick-to: 6.3 6.2 5.15
Change-Id: I8714ebc93a283c58bc67911315f787c484fb0dd8
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... in an attempt to foster the use of this data structure by making
it less onerous to spell.
Pick-to: 6.3 6.2
Change-Id: Ib9d17029c75278edde6ba90f65f68af179a6d230
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QFlatMap, like its public brethren, features the broken Qt-style
insert() behavior (what the STL calls insert_or_assign()), which
makes its insert() unusable for actual STL-style insert() work,
with no replacement except the size-check-and-index-operator trick:
const auto oldSize = c.size();
auto &e = c[key];
if (c.size() != oldSize) {
// inserted
}
Even though QFlatMap::insert() appears to return the correct info,
it's useless, because the old value has been assigned over by the
time insert() returns.
Pick-to: 6.3 6.2
Change-Id: If4173c42523a128dfd22ab496dde0089ba73f41c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add some sort of autotest for both RGBA16F and the new RGB10A2. The
latter is introduced particularly because ideally we should have a
texture format that corresponds to the D3D/Vulkan swapchain color
buffer format with HDR10.
Change-Id: I1e1bbb7c7e32cb3db89275900811c0bcaeac39d6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The documentation says that if it's negative, we find the null
termination. This bug was introduced with the clean up to use
QByteArrayView in commit 8897aa071a.
Fixes: QTBUG-99640
Pick-to: 6.3 6.2
Change-Id: Ib42b3adc93bf4d43bd55fffd16c89fa4a960f3a9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If the editing app (like qtbase/examples/widgets/richtext/textedit)
has controls only for setting a specific font, and someone uses it to
write markdown "from scratch", then we need to detect that they chose
Courier or some other fixed-pitch font, and write the backticks,
because Markdown has no syntax for selecting a specific font family.
If the user loads markdown into such an application, the font
is set to QFontDatabase::systemFont(QFontDatabase::FixedFont).
Round-trip editing was already working, as long as such a font exists.
QTextCharFormat::setFont() calls setFontFixedPitch(font.fixedPitch()),
but for the chosen "mono" font, font.fixedPitch() can be false.
For semantic completeness and separation of concerns, we now
set fontFixedPitch explicitly if a `backtick` span is encountered.
As a followup to f1e60de665 this
should get its autotest passing reliably.
Fixes: QTBUG-99676
Pick-to: 6.3 6.2 5.15
Change-Id: I4987a1f0f819f82ec64546bdc3ef53e7d29933de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Add test to verify that allowing wordWrap actually breaks long lines.
Pick-to: 6.3
Change-Id: I09bd2d754e86ebf35db551ee76f7f037371acec9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Remove unused column in test data and unused local variables.
Pick-to: 6.3
Change-Id: Ia012fe8240cf9831c1053b76ae31216145d61732
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Suppress the error:
C1128: number of sections exceeded ... limit: compile with /bigobj
Fix by setting the correct target in CMake script.
Pick-to: 6.2 6.3
Change-Id: If241fbaa70b68ca698dae2d484146e7bac970609
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Do not build and run tst_QIcoImageFormat when QT_FEATURE_ico is
disabled. This test was failing on webOS since there is no
imageformatplugin for .ico when the feature is disabled.
Fixes: QTBUG-99633
Pick-to: 6.3
Change-Id: I410b351f773639c0c29e09d4d0b5bc6da13df1d9
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
As these are QList and QHash. All existing usages are based on this
anyway, no value in being able to indicate "not available" - an empty
container fulfills the same role.
Change-Id: I8059025fa7a4acb6fc674cd98b16fcafa19ed85d
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
We want an ordered list item's number to be rendered with default char
format, like the others in the same list, even if the list item's text
begins with a span that has a different char format. So insert the
list item's block with a default char format first, then change the
char format of the cursor to suit the text that's about to be inserted.
In HTML interpretation, it means the <li> does not have a style, but
contains a styled span.
Fixes: QTBUG-92445
Task-number: QTBUG-3583
Task-number: QTBUG-99148
Pick-to: 5.15 6.2 6.3
Change-Id: I7eb58a8d1171c16503cac01c8cce109d9f12e1af
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
For Direct 3D, Metal, and Vulkan this is natively supported. (and
makes no difference in particular for D3D and Metal because they do
not have the legacy combined image sampler concept anyways)
With OpenGL it will work too, but this relies on SPIR-Cross magic and
is still using a combined sampler (e.g. a sampler2D) in the GLSL
shader. The GL backend walks back and forth in the mapping tables from
the shader baker in order to make this work, which is presumably
slightly more expensive than combined image samplers.
Do note that combined image samplers (i.e. sampler2D in the shader and
QRhiShaderResourceBinding::sampledTexture() in code) continue to be
the primary, recommended way for any user of the rhi for the time
being.
Change-Id: I194721bc657b1ffbcc1bb79e6eadebe569a25087
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Like QTextDocument::toRawText(), QTextDocumentFragment::toRawText()
does allow access to the raw string without normalizing nbsp,
line separator, paragraph separator unicode characters.
[ChangeLog][QtGui][Text] Added QTextDocumentFragment::toRawText() function.
Task-number: QTBUG-99572
Change-Id: Ia74150a3870ea0e6326fdcda4d9d0410019124ae
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When creating proxied models, make the source model a QObject child of
the proxy model, so the source isn't leaked when the proxy is deleted.
This drove asan nuts.
Pick-to: 6.3 6.2 5.15
Change-Id: I0f7fc9ab8e99d030c941cfb336ee4e2323b362ae
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QWidget and QWindow use bits in QObjectPrivate to provide for a couple
of shortcuts -- one in qobject_cast, and another in the isWidgetType() /
isWindowType() functions in QObject. These can be optimized by simply
looking at the bits, without actually doing more expensive runtime
casts.
These bits were set on construction, but not unset on destruction. The
result was for instance that destroying a QWidget would report that the
object was still a QWidget when ~QObject was reached.
Fix this
1) by setting the bits only when QWidget / QWindow constructors start;
2) by resetting the bits once ~QWidget / ~QWindow are completed.
Technically speaking this is not 100% correct in the presence of data
members, but luckily those classes don't have any.
Amend an existing test for QWidget (whose comment said exactly the
opposite of what the test actually did) and add a test for QWindow.
Some other code was wrongly relying on isWidgetType() returning true
for destroyed QWidgets; amend it as needed.
[ChangeLog][QtCore][QObject] Using qobject_cast on partially constructed
or destroyed QWidget/QWindow instances now yields correct results.
Similarly, using the convenience isWidgetType() / isWindowType()
functions now correctly return false on such instances. Before,
qobject_cast (and the convenience functions) would erroneously report
that a given object was a QWidget (resp. QWindow) even during that
object's construction (before QObject's constructor had completed) or
destruction (after QWidget's (resp. QWindow's) destructors had been
completed). This was semantically wrong and inconsistent with other ways
of gathering runtime type information regarding such an object (e.g.
dynamic_cast, obj->metaObject()->className() and so on).
Pick-to: 6.3
Change-Id: Ic45a887951755a9d1a3b838590f1e9f2c4ae6e92
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The system we inherited from the original Qt 5.14 introduction of QRhi
is a text stream based solution where resource creation and frame
timings are sent in a comma-separated format to a QIODevice.
This, while useful to get insights about the number of resources at a
given time, is not actively helpful. The frameworks built on top (Qt
Quick, Qt Quick 3D) are expected to provide solutions for logging
timings in a different way (e.g. via the QML Profiler). Similarly,
tracking active resources and generating statistics from that is
better handled on a higher level.
The unique bits, such as the Vulkan memory allocator statistics and
the GPU frame timestamps, are converted into APIs in QRhi. This way a
user of QRhi can query it at any time and do whatever it sees fit with
the data.
When it comes to the GPU timestamps, that has a somewhat limited value
due to the heavy asynchronousness, hence the callback based
API. Nonetheless, this is still useful since it is the only means of
reporting some frame timing data (an approx. elapsed milliseconds for
a frame) from the GPU side.
Change-Id: I67cd58b81aaa7e343c11731f9aa5b4804c2a1823
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Adds the following in a QShader/QShaderDescription:
- a list of separate images
- a list of separate samplers
- a list of "combined_sampler_uniform_name" -> [
separate_texture_binding, separate_sampler_binding ] mappings
(relevant for GLSL only)
On the QShader (and qsb/QShaderBaker) level not having separate image
(texture) and sampler objects exposed in the reflection info is not
entirely future proof. Right now we benefit strongly from the fact
that Vulkan/SPIR-V supports both combined and separate
images/samplers, while for HLSL and MSL SPIRV-Cross translates
combined image samplers to separate texture and sampler objects, but
it is not given that relying on combined image samplers will always be
possible in the long run; it is mostly a legacy OpenGL thing that just
happens to be supported in Vulkan/SPIR-V due to some benefits with
certain implementations/hw, but is not something present in any newer
APIs.
In addition, before this patch, attempting to run a shader with
separate textures and samplers through qsb will just fail for GLSL,
even though SPIRV-Cross does have the ability to generate a "fake"
combined sampler for each separate texture+sampler combination. Take
this into use. This also involves generating and exposing a
combined_name->[separate_texture_binding,separate_sampler_binding]
mapping table for GLSL, not unlike we have the native binding map for
HLSL and MSL. A user (such as, the GL backend of QRhi) would then use
this table to recognize what user-provided texture+sampler binding
point numbers correspond to which auto-generated sampler2Ds in the GL
program.
Take the following example:
layout(binding = 1) uniform texture2D sepTex;
layout(binding = 2) uniform sampler sepSampler;
layout(binding = 3) uniform sampler sepSampler2;
Inn the reflection info (QShaderDescription) this (assuming a
corresponding qtshadertools patch in place) now gives one entry in
separateImages() and two in separateSamplers(). Assuming sepTex is
used both with sepSampler and sepSampler2, the GLSL output and mapping
table from QShaderBaker will have two auto-generated sampler2Ds (and
no 'texture2D' or 'sampler').
One immediate benefit is that it is now possible to create a shader
that relies only on separate images and samplers, feed it into qsb,
generate all the possible targets, and then also feed the SPIR-V
binary into a tool or library such as Tint (e.g. to generate WGSL)
that canot deal with combined image samplers.
Change-Id: I9b19847ea5854837b45d3a23edc788c48502aa15
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QCoreApplication::installTranslator() does not take ownership of the
QTranslator. The QTranslator dtor removes itself from QCoreApplication
again.
Pick-to: 6.3 6.2 5.15
Change-Id: I17eb7ab350631eb32fe76af29d9a576a0efa05d8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- There is no mounted partition, where we can create/delete files at runtime.
Tests should be excluded for now.
Pick-to: 6.2 6.3
Change-Id: I1c4db13d35da7d570c4bf787299d829e08951195
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... as opposed to QByteArray::toHex('\0'), which doesn't.
Picking to all LTSs because it's in a test.
Pick-to: 6.3 6.2 5.15
Change-Id: I392d5714c4865e530a246ed30a13cdac26b98e0b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- There is no possibility to unpack *.zip archive anywhere on test device or save any file.
Currently we don't have mounted file system.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I8c8d272a92b4475a7548bd10d32fc4203672926b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When fallbacks are disabled for QSettings then it should not be
falling back to any child groups or keys that might exist in a
fallback set of settings.
Fixes: QTBUG-85295
Change-Id: I563999293a103702035c8d3b027b59b94ca43c0e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test helper is expected to crash, but when built with asan, it
just fails.
Skip the test in that case.
Pick-to: 6.3 6.2 5.15
Change-Id: I583142f5ec623895df62498100c1a30539b149ab
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The hasPrefix() function would only use the second 'lookahead' parameter
to check if there was more unparsed text after the current character.
When it's obvious from the codebase that it should actually look ahead
of the current character being processed, and compare againt that future
character.
Html comments were also not handled quite right. Partially because of
the broken hasPrefix() function, but also because it would advance the
current index tracker by 3 instead of 2. Remember that the beginning of
an html comment is <!-- meaning that there are only supposed to be 2
dashes required, not 3. The result would be that something like this
<!----> would not automatically close, because the current index tracker
would jump over the first 3 dashes when it begins a comment, and the
remaining unprocessed string would be ->
Also, because of the broken lookahead in hasPrefix(), a comment could
actually be started with just <!- not requiring a second dash at all.
Pick-to: 6.3 6.2 5.15
Fixes: QTBUG-99147
Change-Id: I8f4d4a1107eaf2dae16d16b7b860525d45a1c474
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We didn't delete the new'ed up QMetaTypeInterfaces, causing asan to
complain.
Fix by storing them in strong references alongside their users in a
statically-allocated container.
We use shared_ptr to hold them, because QMetaTypeInterface doesn't
have a virtual destructor, so deleting objects of the TypeInfo types
(plural!) derived from QMetaTypeInterface though a pointer to the base
class is UB. The shared_ptr constructor, however, is templated, so it
stores the correct call (~TypeInfo()) in its type-erased deleter.
We can't use std::make_shared(), because that doesn't support
aggregate initialization until C++20, so we manually new up the
TypeInfos.
5.15 is not affected.
Pick-to: 6.3 6.2
Change-Id: Ic7ec88c34e02a9e0dd3421848c0c0885f4756702
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
We now have a more reliable test for the case with freeSpaceAtBegin(),
so remove the old test, after we verified it actually doesn't even
test that case.
Task-number: QTBUG-99330
Pick-to: 6.3 6.2
Change-Id: Ic108a722cd2fef1e63a05085a76d7572d1f8c875
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This test case fails on qemux86_64-webos-linux environment and based
on comment on the test case, it probably cannot be expected to pass on
webOS.
Fixes: QTQAINFRA-4717
Change-Id: Ifb34b0c85da2d180a59529791d1109185fef2665
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test waits a bit hoping that all paint events are delivered after
showing the widget so that we can count the rectangles that are getting
updated when scrolling.
Waiting for 20ms is too short unless the system is completely idle.
Based on testing on a local VM, 150ms produces reliable results.
Pick-to: 6.2 6.3
Change-Id: I7729e94eae41476be67291a2f664cff784f96c7d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The construction of the byte array doesn't actually yield
freeSpaceAtBegin() (anymore?), so the comment above it is misleading
(and the test didn't manage to catch QTBUG-99330, either).
Before removing the misleading test, verify that this assumption is
actually correct across all platforms.
Task-number: QTBUG-99330
Pick-to: 6.3 6.2
Change-Id: I2f497321abc26c4148ced5ac12a5880b9ff5ba9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Amends 9b320edb53.
The above commit made the mistake of relying on the 30yr+ old
fundamental relation
size() - capacity() == freeSpaceAtEnd()
which, however, Qt 6's prepend()-optimization (freeSpaceAtBegin())
broke. Because of that, while size() - capacity() may be large enough
to hold the new data, if freeSpaceAtBegin() > 0, then freeSpaceAtEnd()
may not.
Fix by inspecting freeSpaceAtEnd() instead of capacity(). The
following reserve() call is unaffected, since it internally already
adds freeSpaceAtBegin() to the requested size, which is why the
unconditional reserve() in 9b320edb535a0fbe118933d2e983b73f90c32685^
worked while 9b320edb535a0fbe118933d2e983b73f90c32685's capacity()
check did not.
Fixes: QTBUG-99330
Pick-to: 6.2 6.3
Change-Id: I520f36216011423f97a24484263acd40d8b1fa43
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
When an application is about to be closed and all the
destructors are called, if there isQtConcurrent::run on
the way, it crashes as the internal threadpool pointer
is nullptr.
Fixes: QTBUG-98901
Pick-to: 6.2 6.3
Change-Id: Idd84d1518fc6a225263e6666a0f1de2ccef79c82
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
- Stress test creates too many threads on run time.
Testing system is limited in 123.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I215074fa432c8aa18b2a753169646841c01d0b2a
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>