There is no reason for QVariant to go through QMetaType when it can use
the QMetaTypeInterface directly. Without LTO, the QMetaType method calls
are opaque, and we therefore risk to lose optimizations.
Additionally, avoid constructing a QMetaType from a type id if we
already have the QMetaType.
Fixes: QTBUG-90673
Change-Id: I7069ff6aff70d5baecdf5cf5760014c3dda81784
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is in line with QML where
import QtQuick 2.15
Rectangle {
width: 100
height: 100
color: "red"
Rectangle {
id: inner
x: 10
y: x
width: 50
height: 50
onYChanged: { console.log("hey"); inner.x = 10}
TapHandler {
onTapped: inner.x = 20
}
}
}
results in a binding loop warning when the tap handler triggers. While
the change handler would only run once, we cannot statically determine
if we need to loop once, twice, or if there actually is a diverging
loop. Thus we unconditionally warn about the binding loop and stop
executing the binding.
As a drive-by, verify in the related test that a change handler which
overwrites its properties binding itself removes the binding.
Change-Id: I5372019c2389ab724c49cd7489ecbd3ebced1c69
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
So far, all documentation about bindable properties was in the
corresponding classes QProperty and QObjectBindableProperty.
This patch creates one documentation page for a general
introduction to bindable properties and information
concerning all of those classes.
Change-Id: Ib718dbeb385c3899fb34cc2ce03bec7a8d43a034
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
There are two methods which set the interval and do things
afterwards. Setting the interval might trigger other code. This
patch uses setValueBypassingBindings and marks the interval dirty
later, just to be safe.
Change-Id: I2cae3e4a9f040007dfd246c424250034e8df10a0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QTlsBackend is a factory itself - it creates TLS/X509 objects. Having
an intermediary between Factory->Backend->TLS primitive does not look
very natural thus let's squash the first two parts. Backend is a factory
creating TLS primitives, but its static functions also provide information
about backends availablei and give access to those backends.
Fixes: QTBUG-90606
Task-number: QTBUG-65922
Change-Id: I8409d81fd11fb46e6ab4465b4937a7680a8c2447
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
fix QLineEdit Cursor Rect and InputMask area overlapping,
the cursor rect area is white. when inputMask is set,we don't
need draw cursor.
Fixes: QTBUG-89578
Pick-to: 5.15 6.0
Change-Id: Ibec7f8f1f7331a12438fd821c2002903260da10a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
By marking undeclared and unused copy/move constructors as deleted.
Change-Id: Ie74b9cb015090dbb425b701a55eadb9d80ab0285
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Read/write/notify properties, 3 out of 5 defined in this class.
Task-number: QTBUG-85520
Change-Id: Ic6c74f90a2fa3c71d71cf9a5d557f1b6fc489d35
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Same reason as for the version without args. Amends
1461df2ce4.
Change-Id: Ib9f0d8f27d858ff35134001c3cd7945b17668ae4
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
To minimize code duplication, move the socket notifier deletion to the
closeChannel() function, where the pipe descriptor will be closed.
Change-Id: If75ba1c955c706ae6e2b3d9f53f7a25e4aa32fa7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
As part of Qt 6 restructring for the extras modules, this change exposes
the Jni APIs which are very important for Android platform. This patch
adds the APIs QJniObject, QJniEnvironment, QJniExceptionCleaner based
from private QtCore and QtAndroidExtras.
The Jni interface is cross-platform which justifies the name, but
currently, this API is used mainly for Android, and the naming comes
generic without Android keyword to avoid any future limitation on
supporting other platforms.
[ChangeLog][QtCore] Add new QJniObject, QJniEnvironment and
QJniExceptionCleaner APIs.
Task-number: QTBUG-89482
Fixes: QTBUG-89633
Change-Id: I4382dd53a225375759b9d042f6035a4a9810572b
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Change-Id: Ie9c1484c8ad3483da3d559e1703770cdf22cec5e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We missed takeBinding as a supported operation on Q(Untyped)Bindable.
To avoid adding version checks to code dealing with QBindableInterface,
we simply synthesize takeBinding as a combination of binding to retrieve
the binding and setBinding with a default-constructed
QUntypedPropertyBinding.
Change-Id: I43803a0dfe210353d0235f0373d2257f75ffe534
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Consider a zero we need to divide with illegal input.
Fixes oss-fuzz 29347
Pick-to: 5.15 6.0
Change-Id: I2aae1d765d2dd81c95d423038ef5cb878d4f8026
Reviewed-by: Robert Löhning <robert.loehning@qt.io>
We were using the first abbreviation in the list, where the current
time's one is probably more apt.
We look up displayName() using ICU, when in use, but that abbreviatio
may be unknown to it. So ensure, when using abbreviation in place of
empty id, that we get the system zone for ICU, for use if we're asked
for the display name.
This is a follow up to b12d6c6a8a.
Pick-to: 6.0 5.15
Change-Id: I177db55de1ffbc763def8a0423642f2b3da74fa6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have plenty of places where we add some squares and take a square
root; this may be done more accurately and faster by hypot().
Introduce QHypotHelper to handle hypot with more than 3 parameters,
and with 3 when the C++17 version is missing (which it never should
be). Include an overload taking arbitrarily many valus and ensure that
we can use qHypot() with qfloat16. Illustrate with some example uses,
add some tests.
[ChangeLog][QtCore][QMath] Header <QMath> now provides qHypot(), an
implementation of std::hypot() taking arbitrarily many numeric values,
including support for qfloat16, while avoiding the overflow and
underflow problems that arise when naively taking the square root of a
sum of squares.
Change-Id: Ia4e3913fe83fc27d17d8e7f1a52f03ad445c1fed
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Fetched from the authoritative source, verified the content matches
that of the current master revision in the github repository.
Amend one cookie jar test to find the last group in the last chunk
correctly - each group arises from a non-empty hsah-table entry, but
the last few hash-table entries may be empty, in which case the last
group isn't just before the last index, it's earlier by the number of
empty hash table entries. In the process, amend this test and the
related test of the end of the first chunk to iterate all the entries
in the group (in the present version, as it happens, each end-group
has just one entry, but that may vary).
Task-number: QTBUG-90214
Pick-to: 6.0 5.15
Change-Id: I6da365a6ca558124f8275e392735071dc77e04bb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
No change to QLocale's data, one addition to the Windows time-zone
data. What was formerly "Us Mountain Standard time / Canada" is now
Yukon Standard Time.
Fixes: QTBUG-89784
Pick-to: 6.0 5.15
Change-Id: I4c9a23620e74ea379be8a4c5ba0896d35fe9b594
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Ported all properties, except activeThreadCount. Marking it dirty may
cause a re-evaluation of properties depending on it, which may reault in
a deadlock in case of trying to read activeThreadCount property which is
being marked as dirty.
Task-number: QTBUG-85520
Change-Id: Id073b0895c89a9e6b05b57ad520db994e550a1c9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Since qsizetype is signed and the profileSize unsigned, it can turn
negative circumventing the test here.
Fixes oss-fuzz issue 29278.
Pick-to: 6.0 5.15
Change-Id: I1e211c78db6f4ff150613f52d8fc29807f0088ff
Reviewed-by: Robert Löhning <robert.loehning@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
At least some of them don't like the fact we have classes with
non-trivial destructors but trivial move/copy constructors -
disable them explicitly, hopefully those analysers are smart
enough to stop complaining.
Change-Id: I285711a2d21bff89661af928ba326ecd5b69823f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
perf indicates that we spend quite some time in ~QVariant in the
referenced task's benchmark. With this patch, we significantly reduce
the amount of work we do in the destructor for trivial types: Instead of
calling an out-of-line function, which does a few checks and then does
an indirect call through a function pointer to a do-nothing dtor before
freeing the memory, we now simply free the memory.
We achieve this by changing QMetaTypeInterface to leave the dtor
function pointer null if the type is trivially destructible. Then, in
QVariant we use the QMetaTypeInterface directly instead of going through
QMetaType.
Task-number: QTBUG-90560
Change-Id: Iaf87036710e1680323842e1ba703a5d3d0e5027a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If the current index is invalid,a placeholdertext will be displayed.
Fixes: QTBUG-90595
Pick-to: 6.0 5.15.2
Change-Id: Id4c6b9c959242b96ee0944b8fc3131a9a2fdcccc
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Set the available virtual screen geometry. This geometry is needed for
QEventPoint::normalizedPosition calculation.
Pick-to: 6.0
Change-Id: I7e25488d62a5099c14b5c15fa2b4040ea32b9ecd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Jaeyoon Jung <jaeyoon.jung@lge.com>
- Add move constructors to QRegularExpression, QRegularExpressionMatch
and QRegularExpressionMatchIterator.
- Update the documentation to explicitly state that only destructor
and assignment operators can be called for a moved-from object
Task-number: QTBUG-86634
Change-Id: I06b4f54e300541033a9a18339c97338717a06da0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Make use of the device pixel ratio in the QIcon paint method so the @nx
hi-dpi pixmaps are selected when appropriate when painting to a
QPainter.
Pick-to: 6.0
Fixes: QTBUG-90042
Change-Id: I53995a2285ef879e3c4fddb9f8da702e256a260f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Add CMake upstream(3.20.0) version of FindPostgreSQL.cmake, to avoid
server-related headers lookup.
Avoid using the Qt version of the PostgreSQL module, if it's
older than the CMake's one.
Fixes: QTBUG-89639
Change-Id: I71a0c3508000901969933aea8a08d1ad431db711
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
- Remove indirections via helper functions that did nothing but
redirect.
- Remove unneeded checks of !m_helper in delegate. The helper is
always valid for a delegate.
- Use m_ prefix for member variables, as in the rest of Qt.
- Implement init: as per modern Objective-C recommendations.
- Remove respondsToSelector checks that were not needed.
- Use modern Objective-C property syntax.
- Fix code style issues/formatting.
- Remove unused functions.
- Reorder and remove unused includes.
- Class-initialize member variables.
Change-Id: Iedc084b67bb496b2ef13001a0e6aa46d4574eb57
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
None of the APIs used for non-modal operation require NSOpenPanel.
Pick-to: 6.0 5.15
Change-Id: I7ea49a8dad6e724a8a0d4321ea443d4cdcc5a6b1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This was a regression from 395e2d9bc4.
The system behavior is to show the menu on press, so we follow that.
This is also documented at:
https://doc.qt.io/qt-5/qsystemtrayicon.html#ActivationReason-enum
Fixes: QTBUG-86518
Pick-to: 6.0 5.15
Change-Id: Ia4dc5356bf0377a9d55f238caf5bf1becd95648d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Constructing a QMetaType from an id requires a lookup which isn't free,
even for builtin types. When constructing a QVariant from an integer,
this leads to a noticeable performance loss.
In the mirco-benchmark of the linked bug, we improve from
100000000 965
to
100000000 789
on Linux, Intel i5-4690, clang 11.01 with a CMake release build.
This however still does not recover the performance we had in Qt 5.
Task-number: QTBUG-90560
Change-Id: I26440bdc04ef131ce91d3698957f0df43a4c4017
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Otherwise ASAN complains about mismatched new/delete.
Change-Id: I76ddcc388309e20055c93c68b9b6fa8a11b884e1
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
And add an entry about the API changes to qt6-changed.qdoc.
Pick-to: 6.0
Task-number: QTBUG-89429
Change-Id: I146574acd3e4aa5ed6f1629fc68888f009472f19
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make stricter alignment requirements for the allocated header
This strict alignment allows reallocateUnaligned() to property account
for the padding occurring in cases when
alignof(QArrayData) < alignof(T) <= alignof(std::max_align_t), which
happens to be the case on e.g. 32-bit platforms with specific alignment
requirements.
This adds 4 bytes (the difference between alignof(std::max_align_t) and
sizeof(QArrayData)) of overhead for QString, QByteArray and certain QLists
on 32-bit systems.
Task-number: QTBUG-90359
Pick-to: 6.0
Change-Id: I8176a4cc79f100ee772b09425e88fe8ff3ae226a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
By default, use system PCRE2 for Bootstrap library, if not
cross-compiling.
Fixes: QTBUG-90556
Change-Id: I7291927565484073cadacec9a381b54b44ebeaec
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Commit 370324f6e2 changed the call to 'xml' to 'xmlstarlet' because
some Linux distributions do not provide a binary called xml. Anyhow,
the official Windows packages of xmlstarlet only provide 'xml.exe'.
Therefore just check for both.
Pick-to: 5.15 6.0
Change-Id: I4381b256850e4101b760df21f2b0baffb4414620
Reviewed-by: Eric Lemanissier <eric.lemanissier@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This complements patch a148c7b5d71d244, where languageToCode(),
countryToCode() scriptToCode() methods were introduced, with matching
codeToLanguage(), codeToCountry(), and codeToScript() methods.
This allows us to remove the use of private Qt Core API in Qt Linguist.
[ChangeLog][QtCore][QLocale] Added static codeToLanguage(),
codeToCountry(), codeToScript() methods that convert ISO code strings
to the respective enum values.
Change-Id: If5c0843a718c006ade086a6f74ceb86ac6e0fce4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Non-modal or window modal dialogs are shown at show(), via AppKit APIs
that are non-blocking. If we want to block execution at this point, we
need to spin our own event loop. The runModal API of NSSavePanel is not
meant to be used for blocking execution for already shown dialogs, but
is reserved for application modal dialogs.
This means we no longer trip over AppKit's understanding of what state
the dialog is in, which would result in the dialog not reporting back
any files. It also allows us to remove the guard for closing dialogs
twice.
We now also correctly close and end the application modal session if
the dialog is closed programmatically using Qt APIs.
Task-number: QTBUG-89959
Fixes: QTBUG-85547
Pick-to: 6.0 5.15
Change-Id: Ida3dc404417789d4823822ecfbf0935591c23878
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Previously, different threads instantiating the same back-end could
collide in the register, with various unwelcome results.
Give Registry an atomic status flag to track whether it has been
populated or is being destroyed; and protect it with a mutex to ensure
distinct threads do not collide during registration or attempt to
register while the registry is being destroyed.
Document the correct way to instantiate custom backends, and that no
code other than the QCalendar implementation should instantiate the
built-in ones. Instantiators that follow these rules should be safe
from failed registrations, provided they don't pick a name that
conflicts with some other backend. They can also use the recent change
to semantics of registerAlias() to verify that registration *has*
succeeded.
Done-with: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Pick-to: 6.0 5.15
Task-number: QTBUG-88815
Task-number: QTBUG-85692
Fixes: QTBUG-84575
Change-Id: Ie78e700e71d610454152c05cafb38f6f713649ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added for macOS and X11 screens
Task-number: QTBUG-90535
Change-Id: Ifafe7a07ee2abc3c42cd12785db2d7329878375b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Due to limitations of QByteArray it was not possible to store more than
2^31 bytes. This was fixed in Qt6 so throw away the casts to int in the
postgres plugin
Fixes: QTBUG-79059
Change-Id: I8ae7276a04d4936bcf5ba6c413e3412f6c342ff5
Pick-to: 6.0
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
For some use cases, vertical subpixel positioning may be
useful, as it allows you to vertically align text with
other painting primitives. This does impose an overhead,
so we make it opt-int with a render hint on the painter.
Note that this is only supported on Freetype currently.
It might be possible to support on older macOS versions,
prior to Mojave (which has disabled subpixel positioning
entirely), but since it would have limited usefulness
and Freetype is cross-platform anyway, I skipped that.
Note: This drive-by-fixes an issue with subpixel
positioning where glyphs would always be offset by 1/64,
because we added the aliasing offset *after* we had
determined the closest subpixel position. The idea of
this, as far as I can understand, is rather to snap to
nearest subpixel position upwards, not to add an offset
to all glyphs, so it should be added before finding the
correct position. It had a subtle visual effect when
animating the position. It might be that we could get
rid of it entirely, as I haven't been able to reproduce
any issues with that, but I have moved it instead, to
match what I believe the intention was.
[ChangeLog][QtGui][Text] Added render hint flag
QPainter::VerticalSubpixelPositioning which will position
text at subpixel positions vertically whenever supported.
In absence of this, text position will be rounded
vertically as before.
Fixes: QTBUG-35682
Change-Id: I8ce7a72a64e5a0924dac7c244e3e07c2938bfd09
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This fixes INTEGRITY build error:
cannot access position 53 in array of 49 elements
constexpr const char *begin = func + prefix;
and many "expression must have a constant value" errors.
Change-Id: I0e043028fbcb479c6657b59ea144b4536cc65651
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fusion style did not elide a very long text in a QComboBox as it's
done in other styles / non-popup mode.
Fixes: QTBUG-86632
Pick-to: 6.0 5.15
Change-Id: I356a61809220d41717a9039d2b33dd706d034941
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Qt is now always built with CMake.
The "cmake" keyword for QtTest blacklists remains for now. Removal is
tracked in QTBUG-90545.
Change-Id: I0011d56176a07c82698b2eb9aa330e77efa6cd34
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
... where it belongs.
To avoid the loop, introduce the drainAndStop() function, which allows
QWindowsPipeReader to flush the pipe itself. It determines the number of
bytes pending and blocks until the remainder of the process output is
received.
Note that the loop in drainOutputPipes() didn't actually have to
interleave the two pipes (because we're presuming that the operations
will finish instantly), so we don't do it now. Also, the code violated
the API contract: 'true' was returned when the 'wrong' channel received
data; this is now fixed as a side effect.
Change-Id: I38ed4861a238e39e793c3716e856e5bfdeed3d74
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Add a qCompare() overload for qsizetype, preventing it
falling back to the slow code path pre-formatting expected/actual.
toString() should use the correct format from the already present
int-types (see macro TO_STRING_IMPL).
Complements 94aa350621.
Task-number: QTBUG-38890
Change-Id: Ieb8cea7de086141a2c80f93b4c1be01572be96df
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add QRhi APIs to retrieve and reload the contents of the "pipeline
cache".
The only API where there is a true pipeline cache is object is Vulkan
(VkPipelineCache). For OpenGL, the other backend where we support this,
it is simulated with program binaries. The Qt 5 style OpenGL program
binary disk cache continues to work like before, but one has now the
option to do things in a more modern, graphics API agnostic way, that
leads to generating a single blob instead of a large set of files in
some system location, allowing easier "pre-baking" of the cache content.
It is expected that Qt Quick exposes the two new functions in form
if QSG_RHI_ environment variables, thus allowing easy testing and
cache file generation.
As an example for the performance improvements this can give, consider
Vulkan, where we do not have any existing persistent caching mechanism
in place:
Running BenchmarkDemoQt6.exe --scene flythrough --mode demo creates 18
QRhiGraphicsPipeline objects from Qt Quick and Qt Quick 3D.
The total time spent in QRhiGraphicsPipeline::create() during application
startup for these 18 pipelines is 35-40 ms on a given Windows (NVIDIA)
system.
When exporting the pipeline cache contents to a file, and then, in a
subsequent run, reloading the cache contents, this is reduced to 5-7 ms
on the same system, meaning we get a 6-7x improvement.
The generated data is always specific to a given Qt version, RHI
backend, graphics device, and driver version. Much of the implementation
consists of adding and verifying the appropriate header to the blobs
retrieved from the driver, to allow gracefully ignoring data that was
generated with a device or driver that differs from the one used at
run time. This should provide robustness, even if the Vulkan or OpenGL
implementation is for some reason not prepared to identity and reject
incompatible cache/program blobs.
Fixes: QTBUG-90398
Change-Id: I67b197f393562434f372c7b7377f638abab85cb3
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This is an abstraction for TLS backend and its factory, preparing to transition
to plugin-based design.
Task-number: QTBUG-65922
Change-Id: Ibe810e77fd1b715a6bea66cd3f44312b015ac274
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This API gives the names of available backends and provides a basic
information about features/protocols supported by those backends.
Also, it has the 'loadBackend' functions which allow to select
a particular backend (which are becoming plugins).
At the moment, the implementation is still 'hardcoded', the
follow-up patch will allow to select different backends in runtime.
Task-number: QTBUG-65922
Change-Id: I05877de9c02857594e76b24d52e7578bdb01df69
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Also move the cmake_minimum_required call to the top of the file,
because the line before already requires some policy settings, which is
what cmake_minimum_required() is establishing.
For the standard Qt build, we make sure to get appropriate policy
settings by calling qt_internal_upgrade_cmake_policies().
Pick-to: 6.0
Change-Id: If97556a9dd00646e83957959d0f9f16916625160
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Restore holding of a getID() call's return in a QJNIObjectPrivate
eliminated in commit 78cde1bfd94521bbe4972f31a79c959d0990ea77; this
keeps the Java internal object alive for its lifetime, where it might
otherwise be garbage-collected before we're done with it.
Fixes: QTBUG-88610
Pick-to: 5.15 6.0
Change-Id: Id65b059012f7bd3377a6562c1b647feb75a13679
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
To optimize certain operations, it can be useful to know whether we are
currently evaluating a binding. For instance, we have properties whose
storage is only alloctaed on-demand when they are set. However, we would
also allocate them if they are used in a binding context, as we would
otherwise not properly track the dependency. Using
isAnyBindingEvaluating in the getter, we can detect this
situation, and avoid the allocation if it returns false.
This API is private for now, as it exposes some internals of the
property system and should be used with care. As it needs to access the
TLS variable, it also has a non-negligible cost.
Change-Id: I373aabee644fe7020b2ffba7d6a0ad9a1e1b4ec0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Drawing a QPushButton with a menu results in a clipped label text and a
wrong aligned decoration and menu button.
The position of the menu button was calculated wrong (spacing has to be
subtracted since the start position is the right side). Also the text
label alignment was done before it was adjusted for the menu button
which results in an unaligned (in constrast to a pushbutton without a
menu) label and decoration.
Fixes: QTBUG-89619
Change-Id: I872d39ff2d8eb685fe6843e38c7f727868e1ee9a
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Funning <huangyub@uniontech.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
iOS used to close the edit menu automatically when
the user tapped on the screen (even for menus shown
explicitly using the UIMenuController API). Apperently
this has now changed (probably as a part of
[UIMenuController setMenuVisible:] being deprecated in
iOS 13). So we now need to hide it explicitly.
Because of this, we no longer close the edit menu if
the user taps outside the input area. This patch will
fix this by updating the logic in QIOSTapRecognizer to
close the menu explicitly.
There are some more details around when to show or hide
the menu, which is commented on at the relevant places
directly in the patch.
Pick-to: 6.0 5.15
Fixes: QTBUG-90332
Change-Id: I336e3f4003817b39c7abf63f963fde1f3ef87c20
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
iOS used to close the edit menu automatically when
the user tapped on the screen (even for menus shown
explicitly using the UIMenuController API). Apperently
this has now changed (probably as a part of
[UIMenuController setMenuVisible:] being deprecated in
iOS 13). So we now need to hide it explicitly instead.
Because of this, the edit menu would be showing together
with the magnifier class while the user was dragging on
any of the handles. This patch will fix this, so that we
close the edit menu explicitly whenever the user starts
dragging on a handle.
Pick-to: 6.0 5.15
Fixes: QTBUG-80298
Change-Id: Iff2032d64db1b582fa7f048c6a1f37ec8a1528af
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The plugins are meant to indicate what they do support, meaning users of
QNetworkInformation can choose to not care about which plugin is used
and rather just request what they want.
Task-number: QTBUG-86966
Change-Id: Ie130e1791250ec2a4470e3ba7081d982654af06c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It previously fell back on abbreviation, a very poor choice.
The base class does better than that, so use its implementation instead.
Pick-to: 6.0
Change-Id: I47cbfce815cd8b2b533d9c6aeebcf398e5852d02
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This enables the two possible approaches for handling external keyboard
events. While support still exists for before 13.4 then both approaches
are needed. This ensures that all external keyboard events are handled
as key events and passed on accordingly. Additionally, this accounts
for possible shortcuts too, therefore a new function is added to
QShortcutMap to aid that.
As a result, code has now moved from QCocoaKeyMapper to be part of the
gui/platforms/darwin part to make it easier to reuse this code
elsewhere.
Fixes: QTBUG-85727
Change-Id: I349af43468b03fd8dcb16adba02669974affe154
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Get cursorPoint from a mapToGlobal with a cursorRectangle of the selected inputMethod
Fixes: QTBUG-65229
Fixes: QTBUG-58503
Pick-to: 6.0 5.15
Change-Id: I89b056fa91c59d260f02164c9bd6672b5ada64d6
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Avoid complaints from static analyzers that the pointer returned
by malloc might be null.
Change-Id: I3ec3ba03d0b5283dd569200a3040a5fe5990f763
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not only the checkable items need to be indented, but all items in the
same menu, so that they line up.
Pick-to: 6.0 5.15
Fixes: QTBUG-90242
Change-Id: I559005f753b5cd19eaeeeb6658178d62de93b4ef
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
OpenSSL adds an '-arm'/'-arm64' suffix to the DLL names when building
for VC-WIN32-ARM or VC-WIN64-ARM. This needs to be accounted for in Qt
to find the OpenSSL DLLs correctly.
Fixes: QTBUG-89647
Pick-to: 5.15
Change-Id: Ibc9b81e06f8e64c0676f335e13024fa7fe3a4fa3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Does not work any more on recent macOS versions.
As a bonus, Qt now handles file names which contain
“___qt_very_unlikely_prefix_” correctly.
Pick-to: 5.15 6.0
Task-number: QTBUG-39791
Change-Id: I944a68efa18edc72939d953ab32ecb53d8f8e1c4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
So that static analyzers don't get confused by its semantics.
In builds with exceptions disabled, it's not actually called
by client code (e.g. Q_CHECK_PTR will just terminate in that case),
but we still need to make it not return -- add another path that
callss std::terminate(), otherwise we'd have a noreturn function
returning.
Change-Id: Ia8c4ce3e9d971f1757e9c273051cb3dedf23c61f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the sendKeyEvent was invoked, it means that the button not related
with composing text was used. In such case composing text (if it exists)
should be immediately finished.
Fixes: QTBUG-85715
Pick-to: 5.15 6.0
Change-Id: Ifbca067805b8d20f6a90f95b27210595abed964a
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Mouse wheel/touchpad scroll signals sent to the tab bar trigger
cycling through the tabs. In applications where the tab bar is
close to "mouse click hotspots", the cursor may accidentally be
left over the tab bar instead of the main content of the window.
When the user wants to scroll up/down the main conten, the
scroll signals are thus sent to the tab bar and instead of
scrolling, the focus switches to another tab. This is
confusing to the user, because not only does the application
not carry out the desired action (scrolling through the main
content), it jumps to a different tab. Two common examples of
applications affected by this nuisance are Konsole and any kind
of browser (file browser or web browser), where the address bar
is right below the tab bar. Moreover, on macOS, scroll events
do not have an effect on the tab bar widget of the native UI.
Currently, the code makes use of preprocessor directives to
achieve consistent behavior on macOS (`#ifndef Q_OS_MAC`). This
patch implements the check of a StyleHint in order to determine
if scroll events on the tabbar should have an effect. This
approach is more consistent with Qt coding style than
OS-dependent preprocessor directives and, in addition, makes
the behavior configurable according to the user's preferences.
[ChangeLog][QtWidgets][QStyle] Added
SH_TabBar_AllowWheelScrolling as a style hint to enable/disable
cycling through tabs using the scroll wheel. This defaults to
true in all styles except the macOS one so there is no change in
existing behavior.
Change-Id: I99eeb5a1aab03cbc574fac7187d85a8a2d60cf34
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Request the icon pixmaps with DPR=1.
Fixes: QTBUG-90363
Change-Id: I789a72e2ed3379c81c68e1074069823bf633cf2f
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Add INTERFACE_COMPILE_DEFINITIONS of Qt6::Core to generated rcc object
libraries. This propagates QT_NAMESPACE definition to the object
library.
Fixes: QTBUG-85620
Change-Id: I252d1aaee7b19a49bc321fdd271a5d85a34bf67f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This also needs improvements to qvkgen. What we get with this patch
are the Vulkan 1.1 and 1.2 core API's additional 11 instance-level
and 30 device-level commands present in QVulkanFunctions and
QVulkanDeviceFunctions.
All of these are attempted to be resolved upon construction. When the
implementation does not return a valid function pointer for some of them
(e.g. because it is a Vulkan 1.0 instance or physical device), calling
the corresponding wrapper functions will lead to unspecified behavior.
This is in line with how QOpenGLExtraFunctions works. The simple
autotest added to exercise some Vulkan 1.1 APIs demonstrates this in
action.
The member functions in the generated qvulkan(device)functions header
and source files are ifdefed by VK_VERSION_1_{0,1,2}. This is essential
because otherwise a Qt build made on a system with Vulkan 1.2
headers would cause compilation breaks in application build environments
with Vulkan 1.0/1.1 headers when including qvulkanfunctions.h (due to
missing the 1.1/1.2 types and constants, some of which are used in the
function prototypes). In practice this should be alright - the only
caveat to keep in mind is that the Qt builds meant to be distributed
to a wide variety of systems need to be made with a sufficiently new
version of the Vulkan headers installed, just to ensure that the
1.1 and 1.2 wrapper functions are compiled into the Qt libraries.
Task-number: QTBUG-90219
Change-Id: I48360a8a2e915d2709fe82993f65e99b2ccd5d53
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
When an itemview only allows internal moving of items it can happen that
the target accepts the drag'n'drop operation since it's out of the
control of Qt (e.g. Recycle Bin or an other application). Due to the
nature of a move, the original item is deleted. Therefore check if the
internal move target is the same as the source and don't delete it
otherwse.
Fixes: QTBUG-86020
Pick-to: 6.0
Change-Id: I69de4b8d76d1b0f57338b402aee87580226cd6cb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It used QString.compare() and assumed it was returning a bool true on
equality, when it actually returns an int that compares to 0 as the
given strings compare. So it should use compare() == 0.
This fixes several of QTimeZone's blacklisted tests on Android and a
crasher, which we dodged with a QSKIP. Added an id-comparison to a
test. Gave two local variables more informative names, made an early
return into a QSKIP so it explains itself.
Fixes: QTBUG-89905
Fixes: QTBUG-69122
Fixes: QTBUG-69132
Fixes: QTBUG-87435
Pick-to: 6.0 5.15
Change-Id: Icf18ed5a810143d6e65d36e34a70e82faac10b8e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
When creating a time-zone from a UTC+offset name that isn't known to
the system, QTimeZone (since the fix to QTBUG-77738 in 5.15.0) falls
back to constructing a suitable UTC-offset backend; however, the id of
this is not guaranteed to match the id passed in to the constructor.
In all other cases, the id of a QTimeZone does match the id passed to
its constructor.
Some utcOffsetId testcases had different id() than the id passed to
the constructor, due to mismatches where a zone was constructed using
the fall-back but the generated id included its minutes (as :00) or
omitted its seconds. The omission of seconds is clearly a bug, but we
also don't want to include :00 for seconds when it's not needed. So
change QTimeZonePrivate::isoOffsetFormat() to accept a
QTimeZone::NameType to configure how much we include in an id. Its
callers other than the relevant constructor (from offset) still get
minutes, even when :00, but will also get seconds added if that isn't
zero; and the constructor from offset now gets the short form obtained
by omitting all trailing zeros.
Since all valid whole-hour offset names that do include :00 for the
minutes field are in fact known standard offset names, the elision of
minutes will only affect zones created by ID in the case of a
whole-hour offset given without :00 minutes specifier, so these shall
necessarily in fact get the ID passed to the constructor. Creating by
UTC-offset with a name that specifies zero seconds will result in a
QTimeZone instance whose id() differs from what was passed to its
constructor (eliding the :00 seconds and potentially also minutes, if
also zero) but this should be the only case where a QTimeZone's id
doesn't match the one passed to the constructor, when constructed by
id.
Fixed inconsistency between the offset-constructor's declaration
(taking offset as int) and definition (taking qint32) in the process.
Added an id check to the utcOffsetId() testcase. Amended two tests of
offset-derived time-zones' IDs, added comments to make clear how one
of those differs from a matching standard name test and converted two
uses of QCOMPARE(, true) to QVERIFY().
[ChangeLog][QtCore][QTimeZone] QTimeZone instances created by offset
from UTC (in seconds) shall now only include minutes in their ID when
the offset is not a whole number of hours. They shall also include the
seconds in their ID when the offset is not a whole number of minutes.
Pick-to: 6.0 5.15
Task-number: QTBUG-87435
Change-Id: I610e0a78e2aca51e12bfe003497434a998e93dc7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Original QML-specific connection mechanism ignores the receiver argument
and uses sender as receiver. This causes uncontrollable memory growth
in certain cases as connections on receiver persist even after receiver
is destroyed
New connect() with receiver parameter uses underlying API correctly,
disconnect is provided for the symmetry (not sure it's really needed)
Task-number: QTBUG-86368
Pick-to: 5.15 6.0
Change-Id: I4580d75b617cb2c4dfb971a4dfb8e943e325572b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QVector2D has implicit conversions towards QVector3D/4D, and
QVector3D has an implicit conversion towards QVector4D. Although
in principle this is fine because it's not a data loss, it's still
sketchy; for instance, it allows mixed operations to compile:
vector2d + vector3d;
vector4d - vector3d;
vector3d * vector4d; // !
(Random observation: the conversion from QPoint(F) to QVectorND are
actually already marked as explicit.)
This is a leftover not done for Qt 6.0. I am not making these opt-out:
having an implicit conversion here is outright *dangerous*, and any usage
that fails to compile needs to be inspected to make sure it was the
intended behavior.
[ChangeLog][Potentially Source-Incompatible Changes] The
QVector2D/3D/4D converting constructors from another QVectorND
now explicit. This was done to prevent a category of bugs resulting
from operations accidentally mixing QVectorND objects.
Fixes: QTBUG-90327
Change-Id: Ifcd873f6a0d3fc10b9e68c935fe1f69f86a2340b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Currently the codes are only exposed in aggregated form, i.e. through
name(), bcp47Name(). There are use cases though where you are only
interested in either language, country, or script codes. One example
is in Qt Linguist.
This patch therefore exposes the static languageToCode(),
countryToCode(), scriptToCode() methods that were so far only available
in the private API also in the public API.
[ChangeLog][QtCore][QLocale] Added static languageToCode(),
countryToCode() scriptToCode() methods that convert enum values
to the respective ISO code strings.
Fixes: QTBUG-39542
Fixes: QTBUG-64942
Change-Id: Ib1d5c3293e2f53245ba4c1fc8159275bcb290080
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In Qt 5, QVariant::fromValue<T> would not compile unless
Q_DECLARE_METATYPE(T) was used, and Q_DECLARE_METATYPE(T) would lead to
a compile error if T were not copy constructible.
In Qt 6, we do not require Q_DECLARE_METATYPE before using fromValue,
and QMetaType itself works with non-copy constructible types just fine.
However, QVariant still requires it, thus we need to now enforce this in
fromValue itself.
Change-Id: Ib6964a438d8c46033dd3a037b9d871de2b42e175
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Added missing whitespace character in the documentation for QMdiArea,
in the 'detailed explanation' section.
Pick-to: 6.0
Change-Id: I6be1d664bc15e3e461c5fc3d8f82311cc6ea60ea
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
d8602ce58b removed the internal usage
of the singular fontDef.family, changing this to fontDef.families.first()
instead, which will assert if the families list is empty. To match
old behavior, we set the symbol flag to false if there is no family
name.
Change-Id: I594cf3dfa2798e60b37dc525c172fb2cd9aa7380
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
To be able to link a Release user project against a RelWithDebInfo Qt we
set several IMPORTED_*_RELEASE properties in
the *AdditionalTargetInfo.cmake file of each Qt module.
The EntryPoint module however is a bit special as it is an
INTERFACE_LIBRARY linking publicly against a static
library (EntryPointimplementation). Its *AdditionalTargetInfo.cmake file
was almost empty, because qt_internal_export_additional_targets_file was
called before EntryPointImplementation was set up. Also,
qt_internal_add_module, which calls
qt_internal_export_additional_targets_file, does not know that we want
to export the EntryPointImplementation target.
We fix this by telling qt_internal_add_module(EntryPoint) to not
generate the *AdditionalTargetInfo.cmake file and call
qt_internal_export_additional_targets_file later to take the targets
EntryPoint and EntryPointImplementation into consideration.
qt_internal_add_module learned the option NO_ADDITIONAL_TARGET_INFO to
turn off the generation of *AdditionalTargetInfo.cmake files.
Pick-to: 6.0
Fixes: QTBUG-90039
Change-Id: I68ec7125b538a57567035e7adb8dac3b213f95e6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Instead, have a static function in QRhiVulkanInitParams then Qt Quick
and anyone else who creates a QVulkanInstance that is then used in
combination with QRhi can query.
Change-Id: I046e0d84541fc00f5487a7527c97be262221527f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...as described in the Vulkan >= 1.1 spec. One can now call
supportedApiVersion() (before create(), similarly to the other
supported* functions) to determine the available Vulkan
(instance-level) version.
Fixes: QTBUG-90333
Change-Id: Ibe8482402b7f07e4abc48c88252ff0365e4e2faa
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
My guess: it was relocatable because before 6.0/5.15 we didn't
call constructors for Q_PRIMITIVE_TYPEs.
Change-Id: Ibc9e23e41d0c4b9718fc7036d9a647cfdcfa7d47
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Moving sections in RTL mode did not work correctly - in contrast to LTR
mode the secion must be moved much further to the left or right to
actually move it.
Found while implementing an indicator for QTBUG-673
Task-number: QTBUG-673
Change-Id: I5a82d3cdb39415a408b2884d0ee302e0547e884f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
They have been reported wrong since Qt 4, and not fixed for behavior
compatibility, fixing it for Qt 6.
[ChangeLog][X11] XF86LaunchXX keys have been remapped, so the Qt names
and X11 names match, instead of being 2 off.
Pick-to: 6.0
Fixes: QTBUG-25261
Change-Id: Ie3a8676439ae3e93a78218c9e7f4443565e84356
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
The generic functions are better optimized anyway, and it this old
method appears to have old bugs.
Fixes: QTBUG-20681
Change-Id: I60e4cc5f6cd90c851e90106ac9badfc6c249cd9f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When writing out a float value, the output string is encoded as QVariant
for no reason. Looks like an oversight when QMetaType::Float was added a
long time ago.
Fixes: QTBUG-21156
Change-Id: I7f5d31e15892d700c1b1e5e731b7733ce3a15730
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add an enumeration for system-out and alog element
for it. Redirect the messages types that are not warnings/errors
to this element. For compatibility, write it out only
if it is not empty. Rename enumerations and members accordingly.
[ChangeLog][QtTestLib] In JUnit XML, output that is
not a warning/error is now logged under <system-out>
instead of <system-err>.
Fixes: QTBUG-86540
Change-Id: I55598eafa7dafa486ac5a8221029c332ff47413b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A resize event delivered after closing the platform window
was causing the stored frame margins to be cleared.
Bail out of QWidgetWindow::updateMargins() if the
platform window is null.
Pick-to: 5.15
Fixes: QTBUG-79147
Change-Id: Iebbc90c3cccafa209cd720baedf45affb3f3c2b8
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The native NSSavePanel does not have an option corresponding
to DontConfirmOverwrite. Qt has a workaround where
the save-file-name is temporarily given a prefix in
order do bypass the overwrite check, however this has
stopped working on recent versions of macOS. (Confirmed
on macOS 11)
Users who want to use DontConfirmOverwrite should use
Qt’s file dialog instead.
Fixes: QTBUG-39791
Pick-to: 5.15 6.0
Change-Id: Id3b9e6de72c2afc9526c96f1d9fdbce78db92aeb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][QtCore] qIsInf(), qIsNaN() and qIsFinite() now, like
std::isinf() and friends, accept integral types (returning false,
false and true, respectively) as well as floating-point ones.
Change-Id: I1e2b7f033f0e8166c0b21e31a62b3e6d37b9344a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When setting the application's focus widget we search for the next
child widget that can hold the focus and call its setFocus() method,
which also updates focus widgets of all its parent wigets.
In case if the focus widget is the active window itself, we only set it
as the application's focus widget, but we don't update the focus widget
of the active window itself. Because of this the focusWidget() method
always results nullptr for the active window. This prevents from setting
the focus back to active window after the focus has changed (for example
after a context menu is closed, as in the bugreport).
Transfer the focus to active window by calling the setFocus() method, as
it is done in case of transferring the focus to any other widget.
Pick-to: 6.0 5.15
Fixes: QTBUG-85846
Change-Id: I91ebf182fd5bb7d451a1186e2f3e38c8d48acc4e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Otherwise we end up with generating broken qvulkanfunctions cpp and h
files.
For example, encountering the following command element should lead to
taking no action, this is not something we want to emit a corresponding
wrapper function for:
<command name="vkResetQueryPoolEXT" alias="vkResetQueryPool"/>
This is required to be able to upgrade the bundled vk.xml to something
newer.
Fixes: QTBUG-90330
Task-number: QTBUG-90219
Change-Id: Ie6e3a8794207e30a172820eb055238bf52a0c0b9
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The input has been fetch into a set of uint32s, so no longer a
string of ushorts.
Pick-to: 6.0 5.15
Fixes: QTBUG-90246
Change-Id: Id52a6824317b0744310008cc2ce2f726539b4c8c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Functions in QtFlagHandlingHelpers.cmake try to update the CMake cache
variables for compiler and linker flags. These were using the current
value of those variables and writing the modified ones back to the
cache every time CMake ran. If a toolchain file sets or modifies any of
these variables, that updated value is used and written back into the
cache instead of the original cache variable's value. The next time
CMake executes, the toolchain file re-applies the same change and the
variable grows longer each time with flags repeated. With Ninja, this
causes a complete rebuild every time CMake is re-run. The Android NDK
toolchain file is one example where this behavior is triggered (the
fault is shared, one could argue that the NDK should only be setting
..._INIT variables, but that's out of our control).
Another related bug in the previous implementation was that the flags
used to build after the first CMake execution could be different to
those used for all builds after the second and later CMake runs. This
is because the CMake cache was being updated, but not always the
calling scope of the functions that modified them. If a toolchain file
set any of the compiler or linker flag variables as non-cache
variables, then updating the cache variable would have no effect on
the calling scope. The non-cache variable would continue to take
precedence for that scope for that run. The next time CMake executes
though, the updated cache variable would now have been used by the
toolchain file and the change *will* be part of the non-cache
variable's value.
The above are examples of why you should try to avoid updating these
cache variables from project code. We could leave the cache alone and
always update only non-cache variables, but then a developer looking
at the cache may wonder why the values they see there don't match the
values being used in builds. Or worse, they think the cache values
are being used and don't realize the builds are using something
different. Ultimately, we have to choose which downside we are happy
to live with. The changes here preserve the previous intent of
updating the cache, but it's still a bit fragile.
Fixes: QTBUG-89821
Task-number: QTBUG-85992
Task-number: QTBUG-86866
Change-Id: I8a16753e159bde338e6d2e5dd2ce91fc8ac5c39d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In this case, the previous action's tip is still displayed
when the cursor moves from one action with tip to another action
without tip.
Fixes: QTBUG-89082
Pick-to: 5.15
Pick-to: 6.0
Change-Id: I0a00595dc3d716725678487be9cbb363c4d3b392
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If a default font was not registered for the widget's class, it returns the default font of its nearest registered superclass.
Fixes: QTBUG-89910
Pick-to: 5.15 6.0
Change-Id: I6e6b2c6a0044462f84db9f76a03be0c6cfaaae8e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
To enable the current Qt version to use a qt.conf that is independent
from the previous version, a file named 'qt<major-version>.conf' is
searched for first. If this file does not exist, a file with the
name 'qt.conf' is searched for.
Task-number: QTBUG-88635
Change-Id: If75b63f72a7bdbdf1de7729ea4ecb00810b58d12
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
setTabOrder was not considering the case, when a child widget has
its focus proxy set to its parent widget. This happens, for example,
for the QLineEdit that is nested inside the QAbstractSpinBox.
For such cases the lastFocusChild was calculated incorrectly, and, as
a result, such child widgets were not correctly positioned in the
focus chain. This could lead to an error while backtabbing.
Here is a brief example. Suppose we have 3 widgets arranged like this:
auto spinBoxOne = new QDoubleSpinBox;
auto spinBoxTwo = new QDoubleSpinBox;
auto button = new QPushButton;
Then the default widget focus order is:
- spinBoxOne
- lineedit (from spinBoxOne)
- spinBoxTwo
- lineedit (from spinBoxTwo)
- button
Before this commit setting the explicit tab order changed the focus
order in the following way:
QWidget::setTabOrder(spinBoxOne, spinBoxTwo);
QWidget::setTabOrder(spinBoxTwo, button);
- spinBoxOne
- spinBoxTwo
- button
- lineedit (from spinBoxOne)
- lineedit (from spinBoxTwo)
In this case, backtabbing from spinBoxOne actually leads us to
lineedit (from spinBoxTwo), which refers to spinBoxTwo.
And so we're stuck in a loop.
This commit fixes the issue by handling such special case, and
preserving correct focus order.
Note: the actual unit-test in this patch uses QLineEdit instead of
QPushButton, because one can't tab to buttons on macOS by default.
However the general idea is the same.
Pick-to: 6.0 5.15
Fixes: QTBUG-81097
Change-Id: I5d16da7733a4d63f809cab28b8ca9e116b87cffa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QGuiApplicationPrivate::processMouseEvent() sends a
QWindowSystemInterfacePrivate::TouchEvent if the mouse event is not
accepted and AA_SynthesizeTouchForUnhandledMouseEvents is enabled.
A QPA TouchEvent always contains native touch points, which is why
it calls QWindowSystemInterfacePrivate::fromNativeTouchPoints to
translate the QMouseEvent's device-independent position back to the
raw position that it would have had if it came from a real touchscreen.
Therefore we must give that function touchpoints that are actually in
native coordinates.
It may be that some of this transformation could be avoided entirely,
but here we prove that the existing way works correctly, by adding
coordinate checking to the tst_QWindow::mouseToTouchTranslation() test.
Pick-to: 6.0
Task-number: QTBUG-86165
Change-Id: I4c9ca2b11e9eb76d79712c187db3eb9865da581a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The fusion style did ignore the QIcon::On icon because it reset State_On
to avoid the visual shift of a pressed button.
But it's not needed to reset this flag - the shift does not happen
because the fusion style does return 0 as offset for
PM_ButtonShiftHorizontal/PM_ButtonShiftVertical so no shifting will
happen.
Fixes: QTBUG-86736
Fixes: QTBUG-82110
Change-Id: Ie2aaddb14bc67874f5a9a23d9f04d7a08c6d070f
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
One table per color channel, as is possible from many inputs.
Change-Id: I9fc723c68f222a228dd2b1458207b028422913bf
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The delta was clearly intended to be used on the total (and still is)
but it also wound up getting stored in the cache, which wouldn't be a
big problem unless the object was removed, in which case we could
incidentally 'free up more space' than intended.
Pick-to: 6.0
Change-Id: Ib2b0f072d30da6d16a93dce60e4c5f6080c109fc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In the readFromInotify() function, add a check whether
the ioctl function is successful or not. In the case of
failure, continuing to execute the following code would cause
errors in the read function because there is no data in the buffer.
Change-Id: Id53037e9e48c97c9eb75835048143875275b6370
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Some ODBC drivers do not properly handle SQL_NO_DATA and therefore
decimal values returned with HighPrecision are cut off because the
decimal point is not taken into account.
Fixes: QTBUG-73286
Pick-to: 6.0 5.15 5.12
Change-Id: I905c947b4d0266a3245d5735300300ca00f77480
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Currently there is no way to get the name of the current style to e.g.
create a QProxyStyle for a specific widget only.
Therefore add QStyle::name() so QProxyStyle(const QString &) can be
called without hard-coding the style name.
Remove an unused doc snippet as drive-by.
Fixes: QTBUG-8004
Change-Id: I466c5e870a5392b238365bdc930f6a2ecee50cdb
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Pass the right from depth to the conversion function, and
set the right format before creating the compositor image
for RGB16 support.
Pick-to: 6.0 5.15
Fixes: QTBUG-85621
Change-Id: I76f46a3c2d8f1d2b040b790035dbdb0a960ff1a7
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
For Qt Widgets we thought it was a good idea to also store in the cache
if a class didn't have a factory plugin. This worked fine there, since
the number of QWidget classnames is quite limited (so the factory plugin
cache will soon reach a limit)
In QML however, classes are often suffixed with e.g. Button_QMLTYPE_123,
Button_QMLTYPE_124 etc.
This number suffix is just increased continuously. This could lead to that
the factory plugin cache will grow ad infinitum, which will cause
"memory leaks" in addition to a performance penalty.
Pick-to: 6.0
Pick-to: 5.15
Fixes: QTBUG-75106
Change-Id: I9ba189f989f0b90ab62a2c54a2e9230236a998d8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The porting script could not handle this special case.
To achieve the same thing, we'll use an intermediate 'OBJECT' library
which will get the '-fno-lto' build flag if the conditions are met.
Fixes: QTBUG-89426
Pick-to: 6.0
Change-Id: Ied62502ce9c7f7fd6b89fab166f7bccfcd6e7433
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When the QComboBox gets a custom view with multiple columns, only the
first one is selected even the selection mode of the view is SelectRows.
The selection changes afterwards properly honor the mode though.
Therefore check for the selection mode and call setCurrentIndex() with
the appropriate flags.
Fixes: QTBUG-86776
Pick-to: 6.0
Pick-to: 5.15
Change-Id: Ieba7b9e009358e7b6e802b7847640161ec776c64
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Was implemented for QLineEdit but not QTextEdit.
Fixes: QTBUG-83056
Pick-to: 6.0 5.15
Change-Id: I1e67ad0f1c230a062a1e12e8bc0b209c5289dc32
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The width of the combobox took the space for the checkmark and the contents
into account, but didn't provide any padding on the right side, resulting
in the text hitting the right side of the combobox popup.
Add another 12 pixels padding to the sizeFromContents implementation,
which results in a symmetrical padding on both sides of the text.
Fixes: QTBUG-88715
Pick-to: 6.0 5.15
Change-Id: I811da73d11ce935c1fb83efabbe799f9a882e1d7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Turn the warning into a qCDebug() statement and add explanatory comment.
Fixes: QTBUG-85683
Pick-to: 5.15 6.0
Change-Id: I2a6a7a089a660294f3e9c3096299c75635b3b215
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
From QRhi's perspective this consists of two things:
- A shader with samplerExternalOES in it cannot go through the standard
pipeline. Rather, a QShader with suitable GLSL code in it has to be
constructed manually. As this is something useful as an autotest
anyway, add a test case to the qshader autotest that demonstrates
this.
- When it comes to correctly calling glBindTexture, add a QRhiTexture
flag. The expectation is that an OpenGL-only client sets this in
combination with QRhiTexture::createFrom(), thus wrapping an existing
texture that then gets bound to the GL_TEXTURE_EXTERNAL_OES target
instead of our usual GL_TEXTURE_2D.
For completeness we also add a SamplerExternalOES variable type to
QShaderDescription, but the sampler type is not actually used by the
QRhi OpenGL backend, as it is the QRhiTexture that defines the
texture target.
Change-Id: I36b52325deb3703b59186ee3d726d0c3015bfc4b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...to the extent it is sensible. We have to make compromises still,
meaning some fields will only be applicable with certain APIs.
Most of this is already shown upon QRhi::create() as info debug
prints, when enabled. Now expose it all through the QRhi API as
well.
This is useful for printing in qtdiag, and, while it should be
avoided as much as possible, to make decisions about disabling
3D rendering features depending on the driver and GPU in use.
Change-Id: Iebe1e192965c928b82a094d1c7c50ddf4b38b9a2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The color should be used across the board, so the PlaceholderText color
should also be respecting the one passed for Text and so on.
Fixes: QTBUG-89815
Pick-to: 6.0 5.15
Change-Id: I2accb3db35488f95a1c8ebacf2316a08ee416fac
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Doing so results in a warning about "modalSession has been exited
prematurely - check for a reentrant call to endModalSession:", and
on Big Sur will also result in the file failing to save because the
return code from runModal will no longer be NSModalResponseOK.
This would happen when the completion handler for beginSheetModalForWindow
would call QNSOpenSavePanelDelegate_panelClosed, resulting in calls to
QDialog::done(), which in turn tries to hide the dialog, via
QCocoaFileDialogHelper::hideCocoaFilePanel().
Pick-to: 6.0 5.15
Fixes: QTBUG-89959
Change-Id: I048afe3dcc7fe62e0d0273f12b4b2c0237abb052
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QTextDocument and the text editor classes suggest to override
their loadResource() methods to provide data associated with
a text document. This approach has the following drawbacks:
- it requires subclassing
- there is no way to set a global resource provider
- QLabel is missing virtual loadResource() method and
it can't be added without breaking ABI
QUrlResourceProvider is designed to solve these issues.
One should create a derived class that implements
QUrlResourceProvider::resource(). The objects of the derived
class then can be set for any text document.
The default resource provider can be set with
QUrlResourceProvider::setDefaultProvider().
This change also adds QLabel::setResourceProvider(),
which doesn't break ABI.
[ChangeLog][QtGui][Text] Introduced QUrlResourceProvider that allows to
load resources for HTML. It is intended to replace the use of
QTextDocument::loadResource().
Change-Id: Iaf19b229f522a73508f20715257450fe58f68daf
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Per the discussion of QTBUG-88831, we determined that module-wide
imports are unfortunate, especially for compile times. Following this,
all QtDBus includes have been replaced with the headers for the classes
actually used in each file. Additionally, some cleanup of header file
order and format has been performed in the changed files.
Pick-to: 6.0
Change-Id: I62c1b75682a48422f0ba1168dd5d7bd0952808ac
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When we add text to QPainterPath, we will add the design metrics
(unhinted glyphs) and scale these down to match the target font size.
But the glyph positions we pass in are based on the hinted metrics,
samples at the target font size. Thus, on fonts/systems with hinting,
these do not match the scaled design metrics outlines.
To fix this issue, we make sure the text layout uses design metrics
when determining the glyph positions.
[ChangeLog][QtGui][Text] Fixed an issue where QPainterPath::addText()
would get inconsistent kerning for smaller font sizes when hinting is
enabled.
Fixes: QTBUG-20900
Pick-to: 5.15
Pick-to: 6.0
Change-Id: I651997d1a6a86e6271557438afa2cdad078a83ca
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make sure the search start with valid values.
Pick-to: 6.0 5.15
Task-number: QTBUG-89354
Change-Id: I5b5100db89c62f23748b5c88e9188cfe3811e6e8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
SQlite allows to return fine-granulated error codes but this behavior is
not enabled by default (due to backwards compatibility concerns).
Enable them for the SQLite driver by default but provide an option to
disable them when needed.
[ChangeLog][QtSql][QSQLITE] The plugin now returns the extended error
codes by default.
Change-Id: I59cec9aea46eb03f1e7ca02903d769c003a1ae30
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
In QPropertyObserverPointer::notify and its calling sites,
variable names "alreadyKnownToHaveChanged",
"knownIfPropertyChanged", "propertyChanged", and at its calling site
"knownIfChanged" are used. This is confusing. This patch
changes those four to "knownToHaveChanged". For the logic
implemented it is not necessary to track whether we
have knowledge about having changed and whether it has
actually changed (if we have knowledge) separately.
Change-Id: I90b86b276ab67b2ed70dba4e456cd90220588870
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
If we create a QBindable from a const property, we should obtain a
read-only interface. Besides implementing this feature, this patch adds
a isReadOnly method to Q(Untyped)Bindable which can be used to check
whether one can modify the property via the bindable interface.
Task-number: QTBUG-89505
Task-number: QTBUG-89469
Change-Id: Ic36949a5b84c5119e0060ed0a1cf4ac94a66f341
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This reverts commit a81dfb32d6.
Paint immediately on WM_PAINT in all cases in order to
avoid flicker on resize.
The cases mentioned in commit a81dfb should no longer
apply:
- QTBUG-38327: QGLWidget is not supported in Qt 6.
- QTBUG-39842: Fixed by using ExcludeUserInputEvents.
Fixes: QTBUG-89688
Change-Id: If82cf7703d6663982769048e86a7060223730ce7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The snippets do not talk about Qt Widgets specifically.
Pick-to: 6.0 5.15
Change-Id: Icc4f243c93189f08124074e4918d535aa37e6560
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reflow text to fit style while at it, to satisfy git clang-format.
Pick-to: 6.0 5.15
Fixes: QTBUG-89709
Change-Id: Iab2bf09399adf2cb0f0219ab40978bb238825ae8
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
There are still other parts of the CMake API that are not yet
documented. This change only addresses qt_add_executable() and the
Android-related commands it uses.
Fixes: QTBUG-88839
Task-number: QTBUG-84482
Pick-to: 6.0
Change-Id: I761b5ce908d1f62284baabe2d414cd37a0efe83d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This patch adds native support for SQL_REAL (float) and SQL_SMALLINT
(short). Previously those datatypes were mapped to double and integer.
[ChangeLog][QtSql] The ODBC driver now properly maps QMetaType::Float to
real sql datatype and QMetaType::Short to smallint
Fixes: QTBUG-8963
Fixes: QTBUG-57279
Change-Id: Ifec4c609734dbe6165c1ebdadb461c2aae47ba78
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
To avoid the mostly hypothetical possibility of failure, delete the
processFinishedNotifier before closing the handle on which it operates.
Previously, because of this, we explicitly disabled the notifier in the
processFinished() function, which made the code unclear. Now, we can
remove that safely, because cleanup() works correctly, and doing it
before calling findExitCode() was not necessary to start with.
Change-Id: Ia7095ded2c7eba8f4d738c6b87c7be41aa3cbbc8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
if pid == nullptr, the child process has already exited and the pipe
readers have been stopped. So the call to drainOutputPipes() is
unnecessary here.
Change-Id: I0bed90d08ac879bb0ae178a1cdc37afb9d825314
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Otherwise, the user may receive the readyRead() signal just before
started().
Change-Id: I8d6fd18fdfcef0580a3e609100198b03b18b1175
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The completion of the child process can take place asynchronously or in
one of the waitFor...() functions. In both cases, we used the same
handler (_q_processDied()), which caused several problems:
a. technically, waitForReadyRead() should have taken into account the
result of the calls to _q_canRead...() slots inside the
_q_processDied() function:
- the user calls waitForReadyRead();
- forkfd descriptor becomes signaled, while a grandchild
process is still alive;
- as readyRead() signal has not been emitted, _q_processDied()
is called;
- the grandchild process writes to stdout pipe;
- now data arrives, and _q_processDied() will collect it, but
won't report it.
b. we had a bug with recursions on Unix:
- death notification comes asynchronously;
- waitForDeadChild() closes forkfd;
- _q_canRead...() emits readyRead();
- a slot connected to readyRead() calls waitForFinished();
- waitForFinished() hangs (forkfd == -1).
c. for blocking functions, drainOutputPipes() was called twice on
Windows.
By introducing a new processFinished() function, we leave the read
operations in the _q_processDied() slot, while the process completion
code is guaranteed to run only once.
Change-Id: I5f9d09bc68a058169de4d9e490b48fc0b35e94cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The container size change from int32_t to int64_t created a subtle error
during font serialization. The size of a QByteArray was serialized
without a proper cast and therefore now 8 bytes instead 4 bytes were
written to the stream.
Fixes: QTBUG-89727
Pick-to: 6.0
Change-Id: If9255a5a3124038356bc5053810f98c7c88f8a01
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
In construction of QPropertyBindingPrivate was an initialization
of inlineDependencyObservers with a comment that this is necessary
because of a union. But inlineDependencyObservers is not inside a
union. The comment is outdated and the explicit initialization
superfluous. This patch removes it.
Change-Id: I06544a816533c41af8fc5da3ef44ddd7c18ca86e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is an addendum to commit 0da5726a43b; making the note about paths
starting with ':' being treated as absolute paths by the underlying
QFileSystemEngine, more visible, so that users of the class don't hit
that pitfall.
Add similar docs to QFileInfo.
Pick-to: 5.15 6.0
Change-Id: Ib34d066d31bb673d340ec41422ed4daf911765b8
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Speculative fix to get the right keys in WebEngine
Pick-to: 6.0 5.15
Fixes: QTBUG-89915
Change-Id: I79519b715a1415dccfc4601aae5025b3222a79ae
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Remove the logic compressing WM_DISPLAYCHANGE signals by the
WParam/LParam since it also triggers when the geometry is changed
by rearranging screens.
Fixes: QTBUG-79442
Change-Id: I00042c9e687bdb67fc17d6c507818b79a7aee0a2
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
There is no reason to have the startup notifier and the death notifier
be active at the same time, as the former will detect death as well.
Previously, these notifiers were racing, but _q_processDied() ordered
signals by calling _q_startupNotification() manually. Thus, the
started()/finished() sequence was always emitted if the child process
was killed anywhere. Now this ordering is simply not necessary anymore.
This makes it possible to reuse the startup notifier for death
notification.
Change-Id: I5ebed9b5f28b19fe56c80498977a3b21be9288fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This is assumed in various places, so best checked explicitly.
Change-Id: I475dcf5cbb60c0272dec560acd2893cff73872ce
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We should use char32_t for the toUcs4() methods of QString and
QStringView and use char16_t for QString::utf16(), thereby matching
QStringView. These naturally imply knock-on changes in various places.
Unfortunately, we didn't make those changes in Qt 6, so they'll have
to wait for Qt 7.
Change-Id: I18451d4b31b76658092e19d3fcbc8bc0fe5ce307
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use Q_OBJECT_BINDABLE_PROPERTY instead of non-existing ones.
Follow-up to 50e1976437.
Task-number: QTBUG-85520
Pick-to: 6.0
Change-Id: I138f0775d9804029f2ecd6bd3594ab47b247392e
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
This reverts commit 09ee4282e5.
The commit made the layouting time go from linear to quadratic, which is
problematic when rendering big documents impractical.
I wrote an alternative fix for QTBUG-20354 which will come as separate
change since it approaches the problem in a different way.
Fixes: QTBUG-89599
Task-number: QTBUG-20354
Pick-to: 5.15
Pick-to: 6.0
Change-Id: Ie450332f06ee40e60c8e4c6c7d10834bff1acf74
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
d25589e052 mistakenly changed the code
to use toString() from the QTest namespace. Call toString()
unqualified and move the compareSequence() helper out of the
internal namespace.
Fixes: QTBUG-89737
Pick-to: 6.0
Change-Id: I8452a0aead7771ad13a5b95438b54e202ccce76b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This commit remove old legacy code that try to deal with clipboard
image conversion in the qwindowsmime class. It now uses
qbmphandler under the hood which is much more complete.
It also add a small fix for the conversion
of BI_RGB clipboard image with an explicit alpha layer (which Firefox
use on Windows).
Change-Id: Iae026378831799dc676e1aba7d5bd6a0d1c01e7f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QApplication tries to close all windows on quit using closeAllWindows,
but closeAllWindows skips windows that are already closing. This can
happen when calling quit() from a close event for example.
QApplication then tries to verify that all windows have been closed,
and that logic should skip the same kind of windows as closeAllWindows
does.
The fact that these two logics diverge was identified earlier in
5af73cd9db, but aligning them required further work. As that
commit notes, the right fix to align them is building on top of
tryCloseAllWidgetWindows(), which already returns true/false based on
whether it could close all windows or not. But, unlike the existing
logic in QApplication::event(), it doesn't skip Popups or Dialogs,
so that discrepancy needs further research.
Pick-to: 6.0
Fixes: QTBUG-89580
Change-Id: I87bff56f2eb8a539f1c859c957f5f239dc1eb93d
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As lists of QStrings and QByteArrays are sequentially iterable the base
types should really also be.
The only problem is that they don't have methods to remove items from
the back or the front, but that is well within what we can support with
QSequentialIterable.
Change-Id: I2ab551e7b11a092aba363fb4012d131bbc4b11b4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make it clear that the fast lookup is by key, not by value.
See also discussion in
https://forum.qt.io/topic/121907/misleading-documentation-of-qhash-qmap/
Pick-to: 5.15 6.0
Change-Id: I396297e0e4674e0a1f889f4138ab52ff224c0ee2
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
When AA_ShareOpenGLContexts is not set, docking or undocking
will lead to changing the associated top-level window. This
leads to changing the OpenGL context, and tearing down and
then recreating all OpenGL resources (assuming a well written
application). The problem is, there are no paint events after
the Show, meaning the user code's paintGL is often not invoked,
which leads to showing an empty QOpenGLWidget until something
else triggers a paint event. To remedy this, send a paint event
upon Show, which should be harmless enough, while fixing the
case of docking/undocking.
Pick-to: 6.0 5.15
Fixes: QTBUG-89812
Change-Id: I3c4560f8f069d86645a6314bf7ad1b4ee8e2c716
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...when a QVkRenderBuffer is used as depth-stencil (i.e. a "throwaway"
depth-stencil buffer that is a lazily allocated / transient VkImage
under the hood). Such a resource is not tracked by the
QRhiPassResourceTracker, so do an explicit barrier in beginPass
instead of having it generated by the tracker.
Fixes: QTBUG-89764
Change-Id: Ice794f44342175f712ea56f450270cbb8929f516
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...encountered in the command list.
Move all, previously local, tracking variables into a struct. This
allows creating helper functions to reduce error-prone repetition in the
executeCommandBuffer() function body.
The only real change in the patch is in the handling of
Command::BufferSubData and Command::GetBufferSubData: here, instead of
calling glBindBuffer directly, use a helper function that also resets
the relevant state tracking variables. A subsequent
Command::BindVertexBuffer or BindIndexBuffer will therefore correctly
rebind the appropriate buffers.
This is particularly relevant with certain command stream patterns
exercised by some Qt Quick 3D scenes:
- A View3D renders a mesh,
- another View3D has some 2D Qt Quick content, as well as a model with
the same mesh.
When both View3Ds use the default Offscreen render mode, the resulting
command list consists of segments along the lines of:
1. prepare resources for first View3D
2. render content for first View3D - this binds the vertex and index
buffers for the mesh (state is tracked; all 1-4 steps are within
the same command list, processed by a single call to
executeCommandBuffer())
3. prepare the content for the "inline" 2D Qt Quick scene - this may
update vertex and index buffers, that may lead to adding
BufferSubData commands to the list (tracked state (last
vertex/index buffer) may need invalidation/updating - and that's
where our problem lies)
4. the second View3Ds 3D content is rendered: a model with the same
mesh as the last (Quick)3D draw call, so same vertex and index
buffers. If #3 did not invalidate and/or update the tracked state,
the glBindBuffer calls are (incorrectly) skipped.
Fixes: QTBUG-89780
Pick-to: 6.0
Change-Id: Icc933252f3993b8727d192e7ba4aa0f842bab51e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
There was a check "if (cd && cd->signalVectorCount())" in the code
which was faulty because "signalVectorCount()" could return -1 to
indicate that no signalVector is available. This patch fixes
the problem.
Fixes: QTBUG-89846
Pick-to: 5.15
Change-Id: I12c512ff8d889ba2bd298789ab6081930f739089
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code using it got removed in qttools commit 01da5d9a
Change-Id: I14d36ac939f2647139fcc42591a044a03e707553
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We did set this variable, however after src/gui/configure.cmake
was loaded (it is early-loaded in src/CMakeLists.txt), meaning the
assignment had no effect.
Also, what this assignment tried to achieve is covered by our global
CMake policies now.
Pick-to: 6.0
Task-number: QTBUG-89754
Change-Id: Ie7aeee1505d112d799455b2915acbfa7e9a12a64
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The qt6_android_generate_deployment_settings() command had been
creating deployment settings files with the wrong key name for qml
import paths. This resulted in the QT_QML_IMPORT_PATH target property
having no effect.
The QT_QML_IMPORT_PATH property can also potentially hold a list, not
just a single value. This change now handles the list case as well,
previously qt6_android_generate_deployment_settings() was assuming it
always held a single path if it was set.
Fixes: QTBUG-89628
Pick-to: 6.0
Change-Id: Ibdd74ec8d130f160433a60a14a0a9f496f496a1b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QMultiHash::equal_range crashes when called in a const member function.
The Data `d` is a NULL pointer when calling equal_range()
before inserting data into an empty QMultiHash.
Then calling`d->find` crashes.
Fixes: QTBUG-89687
Pick-to: 6.0
Change-Id: I10c3d196cbc72aed8c8c922ef16534bba51037b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There is no need to disable startupSocketNotifier because the call to
QProcessPrivate::processStarted() will do that.
Change-Id: I20b816533d9a5c4b9bf57135d26166c961a07d07
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
If there is an editor in the table then this needs to be updated as
the resize happens, otherwise it will not adapt to the new size
correctly and can appear drawn over other cells.
Fixes: QTBUG-85484
Pick-to: 5.15 6.0
Change-Id: I918c37f1ee1b0614c03c6b38f95f0f8b35a571f2
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
The spec hasn't changed, but I made the same mistake in xdgmime
(the reference implementation) and in Qt: when multiple globs match,
and the result from magic sniffing is unrelated to any of those globs,
then I used the magic result, but that's wrong, globs have priority
and one of them should be picked up.
This is now fixed in xdgmime
(https://gitlab.freedesktop.org/xdg/xdgmime/-/merge_requests/3)
and in the expected results in shared-mime-info
(https://gitlab.freedesktop.org/xdg/shared-mime-info/-/merge_requests/99)
which this commit is also tested against.
This change also optimizes QMimeBinaryProvider::addFileNameMatches
to have the same logic as xdgmime for glob matching:
literals > extensions > other globs
As soon as one category matches, we can stop there.
This makes no difference in the overall results, in practice.
The user bug report (against the Qt implementation, actually)
is https://gitlab.freedesktop.org/xdg/shared-mime-info/-/issues/138
as well as https://bugs.kde.org/show_bug.cgi?id=411718
Pick-to: 6.0 5.15
Change-Id: Ia0a34080427daff43c732609443ee6df8f41447c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously it only worked when isNull() was false, which is true for
very short lines, even though length() may be non-zero.
[ChangeLog][QtCore][QLineF] QLineF::setLength() will now set the
length if the line's length() is non-zero. Previously, it was
documented to only set the length if isNull() was false; this is a
fuzzy check, so isNull() could be true for a line with non-zero
length().
Fixes: QTBUG-89569
Pick-to: 6.0 5.15
Change-Id: I803e622ad09c85815dde25df8dd3ba6dfcba0714
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
An invalid (as input data) certificate may have non-zero number of invalid (nullptr)
extensions (if OpenSSL failed to parse them, for example).
Fixes: QTBUG-89547
Pick-to: 6.0 5.15 5.12
Change-Id: I4b93ac9f482f850f02d01b0aea10560dc11b688d
Reviewed-by: Lars Schmertmann <lars.schmertmann@governikus.de>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
The default value is 'DontShowIndicatorWhenChildless' and not
'ShowForChildren'.
Fixes: QTBUG-83648
Pick-to: 6.0
Pick-to: 5.15
Change-Id: I5d4dd9f3f58bcac09ed38d8ae451e3b771695ce7
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
QAbstractItemView::selectionCommand() returned the wrong SelectionFlags
when no event is given since c4366ff018.
Therefore re-add the call to QGuiApplication::keyboardModifiers() when
no event is given and add a unittest for them so it's not removed again.
Fixes: QTBUG-89711
Change-Id: I107357df08c4ff1b1a14d49523401c5e7b428f56
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This attempts to reconcile a minor difference between Qt 5 and Qt 6:
Running Qt Quick applications with a platform plugin such as vnc,
led to an automatic fallback to the 'software' backend based on
the OpenGL capability reported from the platform plugin. In Qt 6.0
this logic is gone from Qt Quick, because we do not have, and wish
not to have, individual flags for each and every 3D API on this
level.
Therefore in Qt 6.0 a Qt Quick application running with the vnc
(or linuxfb, or minimal) platform needs an explicit selection of
the software backend via QT_QUICK_BACKEND or
QQuickWindow::setGraphicsApi().
To keep migration for users of such platform plugins easier, we
can still reintroduce a Qt 5-like logic: by having a high level
Is-QRhi-Supported type of flag, we can make Qt Quick query that,
and trigger the fallback to the software backend when it is
reported as false by the platform plugin. As this is the minority
case and a conscious choice by platform plugins, the flag can be
opt-out (i.e. true by the default hasCapability implementation).
When it comes to the existing OpenGL flag, that needs to stay for
compatibility reasons, but it is worth noting that the new flag
semantically falls in the exact same category: it does not indicate
things will really work at run time, but rather serves as an opt-out,
"do not even try" type of declaration the platform plugin can make,
which then allows modules like Qt Quick to make early, upfront
decisions about which rendering paths/backends to take.
Change-Id: I8d6fddeb82ca6eece7b7abc1a5b64ebe6d8af29d
Task-number: QTBUG-89561
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Take the logic we use in QRhi's Vulkan backend.
Pick-to: 6.0 5.15
Fixes: QTBUG-85791
Change-Id: Ifdc2b3d351af71fbc86e20abcede902303e41fc4
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The only callers are QObject::findChild(ren), and they always
pass valid pointers, so there's no point of checking them.
Change-Id: I789abc3a53db523acf06c1a8a340094a71c79e41
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are no queries for this (somewhat dubious) flag in practice.
Its usage in Qt Quick is gone since 2014 after
0129887195c7255f41515f72ceb213a38b98f72d.
Change-Id: I4fd9cef2705ce13b79ff1dc40a6eda7ce2035e30
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Running with synchronization validation (SDK 1.2.154) we get:
Hazard WRITE_AFTER_WRITE vs. layout transition in subpass 0 for attachment 1
aspect depth during load with loadOp VK_ATTACHMENT_LOAD_OP_CLEAR
Attempt to fix this with an appropriate subpass dependency.
Fixes: QTBUG-89760
Pick-to: 6.0
Change-Id: I67e15a09aab564f63aab646761ccdb1f8b82111d
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Even though there is no D3D-specific logic in the windows platform
plugin, meaning a QWindow with either OpenGLSurface or VulkanSurface
(or anything really) is DXGI/D3D-compatible, it now looks like it is
beneficial, and more future proof, if there is a dedicated surface
type.
As the linked report shows, there are OpenGL-specific workarounds
accumulated in the platform plugin, while not being clear if these
are relevant to non-OpenGL content, or if they are relevant at all
still. (and some of these can be difficult/impossible to retest and
verify in practice)
When D3D-based windows use the same surface type, all these are
active for those windows as well, while Vulkan-based windows have
their own type and so some of these old workarounds are not active
for those. To reduce confusion, having a dedicated surface type for
D3D as well allows the logic to skip the old OpenGL workarounds,
giving us (and users) a more clear overall behavior when it comes
to OpenGL vs. Vulkan vs. D3D.
The change is compatible with any existing code in other modules
because any code that uses OpenGLSurface for D3D will continue to
work, using the new type can be introduced incrementally.
Task-number: QTBUG-89715
Change-Id: Ieba86a580bf5a3636730952184dc3a3ab7669b26
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qt_plugins target is needed by qt_internal_add_plugin function, but when
standalone building sqldrivers, this target does not exist, which causes
configure error. So we need to add this target manually.
Fixes: QTBUG-89714
Pick-to: 6.0
Change-Id: Ia7d613faabb82399c2f3e5771aab24302b3c8f56
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
View embedding when QWidget is involved is a bit finicky. This change
breaks down the steps needed to embed it into an NSMenu item, and
simplifies the process by not relying on a container widget.
The main issue is that QCocoaWindow::recreateWindowIfNeeded() will
potentially create an NSWindow for the embedded view, resulting in
a stray view. To prevent this we set the Qt::SubWindow flag on the
window, but QWidget tends to reset this flag when the widget doesn't
have a parent, so we need to be careful about which order we do the
setup.
Pick-to: 6.0 5.15
Change-Id: I505f7c0a2d8e4350511fdb01a5e9b9c623a40a41
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It's an implementation detail that the default constructed palette
happens to use the d-pointer of the application palette, and as a
result has the same colors as the application palette if requested.
The palette has an empty resolve mask, and hence all the colors in
the palette are undefined. Users should not rely on QPalette() to
represent the application palette when for example overriding a
parent palette.
Task-number: QTBUG-85226
Pick-to: 6.0 5.15
Change-Id: Ia6747887eef6e9a5f21b2002066608c433260de2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The enumeration value was removed in Qt 6 by
1a342b2db1. Ignore it.
Add a check to helper function checkProperty() and move
the code from a5e2f2ddad there
as well.
Pick-to: 6.0
Task-number: QTBUG-89093
Fixes: QTBUG-89700
Change-Id: I0890be8fff155d7342e2386b7f6b0783a5f3a192
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
It's defined in terms of operator<=> on QStringView, which does
not exist, causing a compile error.
Change-Id: I64fc60da4e52c7e53be7849d9b42952be139a816
Fixes: QTBUG-89729
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
CMAKE_ANDROID_NDK is an official variable provided by CMake. The
ANDROID_NDK variable will be set by the NDK toolchain file, but we
don't need to rely on that (the user could theoretically not be using
the NDK's toolchain file). Using the CMake-provided variable means
we don't have to explain the source of the variable in documentation
for the qt6_android_generate_deployment_settings() command. We should
prefer to use things provided by CMake already where it makes sense
and this seems to be one such case.
Task-number: QTBUG-89651
Task-number: QTBUG-88839
Pick-to: 6.0
Change-Id: Ieda54de8f5c65c36da6bb55c87a8b8fdd1d5cd7b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Instead, make them inheritable at creation time.
Change-Id: I1aabc203851b2873acc772ba20258238cbe01d59
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
And renamed PeekRemove* to PeekConsumed to document
better that nodes are not removed when peeking.
Change-Id: I7349f57fcfc3287d1a1309a31ee7f481f8d18755
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a button has no parent, QAbstractButtonPrivate::queryButtonList()
unconditionally accessed parent which results in a nullptr access. Did
not crash because qt_qFindChildren_helper checks for nullptr and
therefore could only be found with a sanitizer.
Fixes: QTBUG-83865
Change-Id: I591e546e96acba50770935b9c3baaf08b09b833d
Pick-to: 6.0
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
[ChangeLog][QtCore][QProcess] Added support for
setStandardOutputProcess() with startDetached().
Change-Id: I61278cdb7084127f583c8c017688da392017b44c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[ChangeLog][QtCore][QProcess] Added support for QProcess::MergedChannels
mode with startDetached().
Change-Id: I953ad2063322015332269522a297f8e2842e438c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
We have the same channel forwarding, redirecting, and merging rules for
all platforms. This makes it possible to introduce the openChannels()
function, which consolidates the logic and performs high-level general
processing of the channels configuration properties.
Change-Id: Id3574fc42a56829328369b6a1a6ec9c95fce8eca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The idea was to create descriptors with HANDLE_FLAG_INHERIT. However,
this can be assumed to be already the case for std descriptors, and if
it isn't, the user messed up, and we shouldn't try to work around it.
This is consistent with what we already do in startDetached().
Change-Id: I8135c5e612c361e77a0442541f2d50cfbb5b4601
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In theory, low-level functions like CreateNamedPipe() or
DuplicateHandle() could suddenly fail. Thus, in order to ensure the
correct configuration of the channels, we must check for these
errors.
Pick-to: 6.0 5.15
Change-Id: I3d6291043e5e394ec5c5a7d85dfb7b09bfdcd172
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The PostgreSQL driver can change it's connection status
after the first established connection.
In this case, the function "isOpen()" returns false
and the "close()" function would not free all resources.
With this fix, the "close()" function
always frees any allocated resource
independent of the connection status.
Fixes: QTBUG-88984
Pick-to: 6.0 5.15 5.12
Change-Id: I7c9add6a183bf46a8573952ab39f8cb1f728c00c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
This method will return a QByteArrayView of the data range corresponding
to the level. This avoids a leaky abstraction by moving the needed data
pointer arithmetic from the caller to the method. It will also make it
easier adding cubemap support in the future.
Change-Id: I2415bd88365d8d69ba14aefc77f5f1117f9e0033
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The configure tests are all in place for CMake as well, and this one
has no special library depdendencies. Generate the CMakeLists and
remove the special case.
Change-Id: I55817045f9e259515fb3aad33d1446d9413111d9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Raw string literals (since C++11 according to [1]), make writing/reading
regex patterns easier, since one can just use e.g. "\w\d" without having
to escape those backslashes e.g. "\\w\\d"; this is especially useful with
longer/more complex regex patterns.
[1] https://en.cppreference.com/w/cpp/language/string_literal
Pick-to: 5.15 6.0
Change-Id: I119f9566d27222b915af931ee7e13e064baede61
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Make sure we use the new QXcbScrollingDevice class for the "core
pointer" as well.
Change-Id: I97575e8125cbb2aa280662aa675e61021c21ea59
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In 1947, Germany had not only a summer time but also a
"Hochsommerzeit", a high summer time. This patch adds a test
creating a QDateTime in the time gap at the beginning of this
Hochsommerzeit on May 11, 1947.
Pick-to: 6.0
Change-Id: Ib81a23914965f092c3e3195e4c7258e5a4e0b30e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Due to a copy'n'paste error in 01ec11507d
the valign was not properly determined for text-align bottom.
Fixes: QTBUG-89366
Change-Id: I081e1b24bba0edd9dd3754599a111c1658b18746
Pick-to: 6.0
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
After improving QtConcurrent::run() to use parameter packs for the
arguments (see c977e74afd), calling
overloaded functions is ambiguous. Updated the porting guide and the
documentation to mention this and describe possible workarounds.
Task-number: QTBUG-89648
Pick-to: 6.0
Change-Id: I4c1f996ae67bce8c13cc1f99f54240295db6ae1d
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Use delegate constructors to avoid code duplication
Change-Id: I5c7d3764966ec07d1e3d175ccb075c64408d2338
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change ac210c73e4 introduced the requirement that all input devices with
Scroll capability must have a QXcbScrollingDevicePrivate as their d_ptr.
However, this was not enforced, and would fail for the "Virtual core
pointer".
To fix this, always use qobject_cast to verify that the device is of the
correct type.
Change-Id: I4a6b1d4d79308eb04e9f52dda00294fffe377bdf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QIconModeViewBase::itemsRect() is crashing with Qt6 when an empty
container is passed.
Fixes: QTBUG-89434
Change-Id: I324f1a34b62e67c7bbd3fe33227f4174df7d3d37
Pick-to: 6.0
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QPicture::play() does not save/restore the painting state when called
directly but this was not correctly stated in the documentation.
Therefore add a small note about this.
Fixes: QTBUG-83198
Change-Id: Ia820d32ccb4689d1e696fecffa9d6b5522e246b3
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This feature is not much used on modern macOS, and
Qt 5 has never supported it.
Pick-to: 5.15 6.0
Change-Id: I9de195aaf7df954b63f0f816e93c91e870ef5852
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
...instead of during createEventDispatcher().
This way, startingUp() will be called [on the thread
being started] also for custom event dispatchers installed
with QThread::setEventDispatcher().
This prevents crashes when installing event dispatches which
expects that startingUp() will be called.
Crash reproducible with test case from QTBUG-51961.
Change-Id: I71bd696539689d928a61ff9b47d05297cf803b2f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit f4a66e5c accidentally made it so that the offscreen
plugin would produce a null QPlatformIntegration on
X11 if QT_QPA_OFFSCREEN_NO_GLX is set.
Restore previous logic where the generic QOffscreenIntegration
is created if the X11 code path did not create an object.
Change-Id: Ic71fb04bbd824f4121480dbaf8fa0571ebb39f42
Pick-to: 5.15
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qdoc does not render these nicely when outputting html:
the enum value table table is split in two around the
\note.
Pick-to: 5.15
Change-Id: Ic2b8c5a247d1100a766e4ae10161aa6ee7644514
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
'QT_HOST_PATH' indicates that we use crosscompilation toolchain
to build project. In this case 'Qt6Config.cmake' loads
'Qt6HostInfoConfig.cmake' from host QT_HOST_PATH, that defines
correct paths to host tools.
Replace hardcoded paths for host tools by paths recorded
in Qt6HostInfoConfig.cmake.
Correct conditions for QT_HOST_PATH, evaluate it explicitly as
string, but not as boolean expression.
Fixes: QTBUG-86557
Pick-to: 6.0
Change-Id: Ib52bbd32478051d019a932dcb1f735e2d4aacfbf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Commands like qt6_finalize_executable() should not rely on versionless
commands or targets being available, since they can be disabled by a
build option.
Pick-to: 6.0
Change-Id: I6a9ab6a9b6a6b731590e5b8c43f73b518ed38e81
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This reverts e52239f525, because we do not
have multi-ABI builds currently, and we must link against what the
WrapOpenSSL package provides.
Fixes: QTBUG-89473
Change-Id: I4f38a2c41e90ec8b602e28f8ca77f0ebd009639c
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Alignment problems occur for pushbuttons because they appear smaller then their
actual widget geometry, which is used for their alignment in layouts. To fix,
shift the pushbutton's rect to the left, adjust SE_PushButtonLayoutItem
accordingly and use QFocusFrame to render the focus frame ring outside
the widget's paintable area.
Fixes: QTBUG-89133
Fixes: QTBUG-81452
Pick-to: 5.15 6.0
Change-Id: Iee885a4fb3674d966e5ff3b5c04a0845521b2d72
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
After 6be398 few tests fail/crash with qtcharts.
Fix issue on reallocateAndGraw and avoid accessing
flags on invalid header.
Data::allocate can return invalid header and dataptr,
which takes place if capacity is 0. In code before 6be398
clone method checks if header is not null before resetting
flags. However after b76fbb4 resetting flags is no longer
needed since it is done in allocateGrow.
Task-number: QTBUG-89092
Pick-to: 6.0
Change-Id: I2fde781dad7a0694a5f17ab716f647c2e35f4ff0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
It took me quite a while to figure out that two objects with
a similar type and a similar name which occur side by side have
a quite different meaning. Add a comment for the next one.
Change-Id: Idf4d63d8ed09ead2c3d82a798e6d7476024209bf
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
KEYCODE_MEDIA_PLAY_PAUSE was incorrectly translated to Qt.Key_MediaPlay.
This patch changes it to Qt.Key_MediaTogglePlayPause.
Fixes: QTBUG-66448
Pick-to: 5.15 5.12 6.0
Change-Id: Icd2747857bc479228bfdffcd8ab8fdef7b79e918
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
By using new QSocketNotifier API, we can avoid unnecessarily enabling
the notifier right before turning it off again.
Change-Id: Ie0dea00251e9885653677c495dfc5abaaa4db1c7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This patch amends a41701904e
If peeking into the event queue looking for a clipboard event fails,
QXcbClipboard::waitForClipboardEvent() calls queue->peek for the second
time to "process other clipboard events, since someone is probably
requesting data from us". QXcbEventQueue::peek() in turn calls
QXcbEventQueue::flushBufferedEvents(). This second flushing can acquire
a waited-for clipboard event. The issue was that the code in
waitForNewEvents() ignored this possibility and assumed that there were
no clipboard events before or at its current m_flushedTail. If there
were no more events on the X11 connection after tailBeforeFlush,
the waitForNewEvents() in waitForClipboardEvent() blocked execution
for 5 seconds and eventually timed out.
The fix is to remember QXcbEventQueue::m_flushedTail just after looking
for and not finding a clipboard event in the queue. And then wait for
more events via QWaitCondition in waitForNewEvents() only if there were
no more events after the remembered m_flushedTail.
Fixes: QTBUG-75319
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I4919c5b9b9227b3a8a29a11e7094f97960b3a121
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This would steal an existing binding from a property, which is most
likely not the intended action.
Alternatively, we could make it equivalent to
Qt::makePropertyBinding(foo), but that conflates properties with
bindings to it. On the other hand, this would avoid a potentially
source-breaking change.
[ChangeLog][Potentially Source Breaking Change] It was possible to
create a QPropertyBinding from a property; this would steal any set
binding from the property or create an invalid binding if none was set.
Use makePropertyBinding if you want to to create a binding which depends
on the property's value, or takeBinding if you want to repurpose the
property's binding.
Fixes: QTBUG-89507
Pick-to: 6.0
Change-Id: Icd2d3b9261b60f36948f2cea9c33ddbea36efbc1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This adds functionality for marking properties (QProperty and related
classes) manually as dirty. This facilliates the integration of bindable
properties with non-binable properties and makes it possible for
bindable properties to change due to external events.
Fixes: QTBUG-89167
Change-Id: I256cf154d914149dacb6cadaba92b13c88c9d027
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
When accessibility was not active it was possible to force its
update, causing a null pointer exception in java.
Pick-to: 6.0 5.15
Change-Id: I60f65612d6e9f712ba3c591ffcc6803f06f09efb
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Remove a second argument to the setSocket(qintptr, bool) function as
it makes the API harder to understand.
Change-Id: Ib1852a4e9d96adde35bfbf0fe03b386d9ded395a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
We only need to check QGuiApplication::quitOnLastWindowClosed() at
the point where we've actually concluded that the last window was
closed.
Checking for !q->parent() was redundant, as we were already
exiting early when !q->isTopLevel().
Pick-to: 6.0 5.15
Change-Id: I934e186d707361b31d19692c04d2e17b7ba0f49e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The child process inherits a standard handle of the main process in
such cases:
stdin - inputChannelMode == QProcess::ForwardedInputChannel,
stdout - processChannelMode == QProcess::ForwardedChannels ||
processChannelMode == QProcess::ForwardedOutputChannel,
stderr - processChannelMode == QProcess::ForwardedChannels ||
processChannelMode == QProcess::ForwardedErrorChannel ||
processChannelMode == QProcess::MergedChannels
For these combinations we should not create pipes and notifiers as
they would not be used.
Change-Id: I8e3836e4d840a40b338c85c54645539ebcaab3f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
For some reason, clang (and thus Qt Creator's code model) did still warn
about the offsetof usage. Moving the warning pragmas one layer higher
appears to fix the issue.
Change-Id: I1ee1cfd690fdcce9105c65e508203a722fe63151
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The pro2cmake script doesn't handle static scopes correctly, and the
generated "CONDITION static" must read "CONDITION NOT
QT_BUILD_SHARED_LIBS".
Change-Id: Ic5a5763e9fd5f5d04fb4c12227cbe85fac17b826
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
It can happen that updateApplicationState() is called before
m_androidPlatformIntegration is set. In such case, new applicationState
will be remembered and propagated later.
Before this change, pending application state was passed only to
QWindowSystemInterface.
ResumePauseListeners that are subscribed for changes to
ApplicationActive/ApplicationInactive state also should be informed
about new application state.
Fixes: QTBUG-84737
Pick-to: 6.0 5.15
Change-Id: I67e79860b340ee5de2d13d148a222e9f1c942b93
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Another case when an OpenSSL's call can dump some errors into the shared
error queue discovered. An invalid certificate with non-null X509 * may
result in several errors appended to the queue.
Pick-to: 6.0 5.15
Change-Id: I1278b371bd1edf2d656760c371bfb6da5dcab6ec
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Skip the memcpy when src is null.
Also silences a Codechecker warning.
Pick-to: 6.0
Change-Id: I5042d725000cb6dff6864408fa9ed9e0ca35145a
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Something defined is always greater than undefined
Pick-to: 6.0
Fixes: QTBUG-89530
Change-Id: I7633dd4233f7b13c3c5be17352841ec873531ef9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
After f08492c6fd was
merged this bug would manifest as an entry appearing twice
in the chain when a updating an existing entry (insert with
an existing key). This could sometimes result in crashes later
as the list filled up and the list was used in trim() to remove
various entries.
Fixes: QTBUG-89176
Pick-to: 6.0
Change-Id: Ide80160fb4317dc0aefe79eec5dce7ec6813e790
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Until now, all wheel events came from one "core pointer". It's useful
in Qt Quick to tell the devices apart, because some support smooth scrolling
and some don't.
Also remove the QHash storing legacy ScrollingDevice structs, and use
a subclass of QPointingDevicePrivate instead.
Task-number: QTBUG-46412
Task-number: QTBUG-72167
Task-number: QTBUG-69433
Change-Id: Ie6a3d8dd494f981e8706b9a66a1021dfb51baec4
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The QString documentation is aligned with QList regarding common
wording and ideas:
- Extend general class description
- Revise description of several methods
- Fix examples to use qsizetype instead of int
- Wrap descriptions at 80 characters
Pick-to: 6.0
Task-number: QTBUG-87962
Change-Id: I7d5a7e829ce8b98a0a1a7fae6b7ae0dec4effbae
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
When using MSVC compiler and -DFEATURE_static_runtime=ON, qrc_foo.cpp
and qtentrypoint_win.cpp are still compiled with '-MD' or '-MDd' flag,
which will cause following warnings and other possible problems:
warning LNK4098: defaultlib "MSVCRT" conflicts with use of other libs;
use /NODEFAULTLIB:library
Pick-to: 6.0
Change-Id: I6794930a64e9cff4dc1c9632fc3fc64227848af0
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
* Remove heading that causes QDoc's autolinker to link incorrectly.
* Clean up language a bit while at it.
* Drop a double space.
Fixes: QTBUG-89283
Pick-to: 6.0
Change-Id: Ice778d66deab384b66eb50b790670c9e3c8b0e84
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Nico Vertriest <nico.vertriest@qt.io>
The case no conversion was needed wasn't handled, but was assumed to be
handled by some call sites.
This can speed up QPixmaps on devices with non-standard screen formats.
[ChangeLog][QPixmap] Opaque pixmaps on devices with a non-standard
opaque format will now correctly match format for faster blitting.
Same with semitransparent pixmaps on devices with a non-standard
semitransparent format.
Pick-to: 6.0 5.15
Change-Id: Ia05ff518fea36b7e3ed5c089fa9e8681a02fc574
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
