Either by testing for platform name or window activation.
After this gets in, we can enable widget tests in the Wayland bot, which
hopefully will reduce the number of regressions in the Wayland plugin.
Fixes: QTBUG-62188
Change-Id: I71ce8abd6b5891e5b953126b1c35345892585931
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
When calculating the header section size based on its contents when a
stylesheet is used, the size hints from the stylesheet are used. In case
if the stylesheet specifies only one of the sizes, the other is set to
-1. Because of this the actual content size is ignored.
The solution is to calculate the size based on the application style, in
case if it's not specified in the stylesheet.
Fixes: QTBUG-75615
Change-Id: I3453fa623d75b6b32832edf753de6e3e4e7f5a22
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Cleanup QHeaderView autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
Change-Id: I4df0b46c58ae9ae9dd4d9762390a2b14886aa68f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
For tst_QFrame and tst_QOpenGLWidget, force scaling off
since they do screen captures which would fail with
scaling activated due to different device pixel ratios.
For tst_QGraphicsItem and tst_QHeaderView, force
scaling on for Windows since some tests otherwise fail
due to violation of the minimum size constraints of
framed windows on Windows.
The tests will then pass regardless of any environment
setting of the scaling variables on a developer
machine.
Change-Id: Iefa4e84b433f7e51dce4e416546a9eda8ee6d0f1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If columns are removed and we get notified via layoutChanged, the code
tries to restore old section sizes, and went out of bounds, leading to
an assert in QVector. Simply add an if() to skip restoring out-of-bounds columns.
This comes from https://bugs.kde.org/show_bug.cgi?id=395181,
which translates into the unittest that is part of this commit.
Change-Id: Ide42176a758f87b21957c40508127d67f1d5a2d9
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Conflicts:
tests/auto/widgets/itemviews/qheaderview/tst_qheaderview.cpp
Added tests/auto/testlib/selftests/expected_crashes_5.txt to work
round the output of the crashes test (which exercises UB, see
QTBUG-73903) being truncated on one test platform.
Change-Id: I9cd3f2639b4e50c3c4513e14629a40bdca8f8273
Still do a begin/end reset model in place, which is probably not the
best code but since it's a test and it works it should be enough
Change-Id: Iffaf8d69d5be64ef5e1e359e3d90a1e8174fc13b
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
it's using deprecated reset() model that we don't support anymore since
"this is Qt6", so include the 2 lines in the code.
This makes for bad code but since it's a test and it used to work i
guess it's good enough
Change-Id: Ia906fe40359ddc0defb10795cf12a17498124983
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
tst_QHeaderView::defaultSectionSizeTest() fails on High-DPI screens
because the default minimum section size is greater than the values used
for testing the header sizes. Therefore the test will fail.
Fix it by explicitly setting the minimum header size to something
smaller than the test values.
Also add a debug line to output the default minimum section sizes so
other failures due to this problem can be debugged better.
Fixes: QTBUG-73309
Change-Id: I257f341cef9381f140aa4d4f68376c5edadc39cc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is required to support the new emoji font on Android 9.
[ChangeLog][Freetype] Upgraded bundled Freetype version to 2.9.1.
This also adds support for the latest emoji font in use on
Android 9.
Fixes: QTBUG-70657
Change-Id: I99be72f0d23c20aca122b8fdadd4ded87b2edce1
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
QHeaderView::initializeSections() was calling updateHiddenSections()
with wrong parameters which lead to an inconsistency in the hidden
section handling.
updateHiddenSections() needs the first and last index which got removed.
Therefore we must pass the new section count for logicalFirst.
Fixes: QTBUG-55461
Change-Id: Ica06125cf19bdd500f55fd9cd59ace1795f3703f
Reviewed-by: David Faure <david.faure@kdab.com>
The min/max section size was not checked when setting the default
section size. This was an oversight when the check for min/max section
size was added to resizeSection().
[ChangeLog][QtWidgets][QHeaderView] setDefaultSectionSize() now
checks if the given value is inside min/max section size
Task-number: QTBUG-69431
Change-Id: I1b5704282927ce5a8520f52174ebf91d9840bc8a
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Fixing some issues that could cause intermittent or environment-dependent
failures. One kind regards the use of multiple QTest::mouseMove()
calls in sequence internally using the QCursor API, causing timing
dependent failures. Switching to the override that does not require the
QCursor API, where possible. Other test could fail depending on the size
of the screen.
Change-Id: I4a368955ddbb48f729dcdf74c20eb163329936b2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
If there is a parent (typically an itemview) then StatusTip events
should be sent to that. However in the case of there not being a parent
then the event should be sent to the QHeaderView itself.
Task-number: QTBUG-68458
Change-Id: I2a8c11c973210c7adf1bf29443f224f968a357a9
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QHeaderView::reset() did not reset the cached size hint which could lead
to wrong geometries when the model was reset.
Task-number: QTBUG-67927
Change-Id: I5100b28a741cc816133a229c422f9abf83f2187e
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
tst_QHeaderView::sectionSizeHint() did set some values but did not check
the return values.
Change-Id: Id606d7a06935a3d6783bc9a8c10bf05d953adec6
Reviewed-by: David Faure <david.faure@kdab.com>
Rename getter QHeaderView::firstSectionMovable()
to QHeaderView::isFirstSectionMovable(), turn into a property
and fix \since.
Change-Id: Ica2ca43d22f3fd78ff63178ba75014807fc9b823
Reviewed-by: David Faure <david.faure@kdab.com>
Before there was a risk looking up e.g index -1 if there
were no visible sections in layoutAboutToChange.
Change-Id: Ic911e4292e8e8c4892fef1c0f34cf7dccaad2bac
Task-number: QTBUG-65478
Reviewed-by: David Faure <david.faure@kdab.com>
Do not clear the settings of QHeaderView during layoutChange when the
model is empty and the section count did not change. This will not work
when a section is moved or a section is replaced with a new one during
layoutChange. But since layoutChanged is also called on sorting, this
patch ensures that the settings are not cleared in this case.
This restores the behavior to the same as before 5.9.4.
Task-number: QTBUG-66444
Task-number: QTBUG-65478
Change-Id: I39989cfd45b42e58f49d18ec014d3a941cadb6c9
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
During (re)storing the sections within layoutChanged handling, the
hidden section size was not properly stored which lead to a section
size of 0 when the section was unhided afterwards.
Task-number: QTBUG-66413
Task-number: QTBUG-65478
Change-Id: I0b714c7e0530a1eae82b3bb0e0dc80ed576522d0
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QHeaderView is doing a complete rebuild of the sections when the layout
changed because everything could have happened. But since layoutChanged
is also called during e.g. sorting, the old data must be restored when
possible.
Task-number: QTBUG-65478
Change-Id: I088d4d843cad362b97df6dc5e0dcb9819b13547f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QHeaderView::resizeSection() did not check if the given section size is
inside the min/max property bounds.
Also on calling setMin/MaximumSectionSize() the current section sizes
were not checked if they are inside the new given bounds.
This is a small behavior change when a user is setting the section size
via resizeSection() without respecting the min/maxSectionSizes.
Task-number: QTBUG-64173
Change-Id: Ia9c9eebf058d60c776ab5f8f8336642013ec553f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QTreeView makes columns movable except for the first one
(since Qt 5.0, see commit e0fc088c0c). This is indeed best
for actual trees, but not when using QTreeView as a flat
multi-column list (with no "root decoration"). Then it should
be possible to move the first column.
[ChangeLog][QtWidgets][QHeaderView] Flat treeviews can now allow
the user to move the first column (like in Qt 4.x) using the new
method QHeaderView::setFirstSectionMovable().
Change-Id: I6b5025e40850bf5c4c373124ee81f657f3f09d29
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
