These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Remove all references to (un)checkAction.
This commit finalizes the intended change.
Change-Id: I79d3b30b5c3d9fbe276c2c94fed5971bb21d6c02
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
e.g. in QStaticText, the data is used just to get the line's y-position
and re-calculates just after the loop to determine the bounding rect and to draw the text;
in QWidgetLineControl, the data re-calculated over and over while the result
is seems to remain the same; probably the caching is needed here too
Change-Id: I0f7eb291532f63eccb9c5f749daebb73ff90632f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This reverts commit a17523805e56511465550a6a93a88b3fc3c8325a
The compatibility overloads were removed in change Icf108a80177155f21bb73c165fb8ab5d4e997bc2.
Change-Id: I4861f281451d66a1aa5f3525eea1773dfef0540e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This changes all the containers that uses QtPrivate::RefCount
(QMap already had one), and QVariant
In Qt 4.8, it was pointless to have the move constructor because we did
not have quick way to re-initialize a null container. (shared_null still
needed to be refcounted)
But now that we have RefCount, and that the shared_null do not have
reference count, we can implement a fast move constructor that do not generate
code to increment the reference count.
Change-Id: I2bc3c6ae96983f08aa7b1c7cb98d44a89255160b
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I2850033159508ebb1ff7564e15b99a146dbee94c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I38f97ad379deafebef02c75d611343ca15640c8a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This autotest fails to build after the introduction of the
QMetaMethod-based connect/disconnectNotify() functions; we are
intentionally keeping the old const char * versions (overloads) for
a limited time, to avoid disrupting other modules.
This commit will be reverted as soon as the compatibility overloads
have been removed.
Change-Id: I9b5a40b51ffa3bfa3d185410389678c262ca7b45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test has been passing consistently since the previous crash was
skipped in commit 6dbd00b120.
Task-number: QTBUG-22792
Change-Id: I41ac001a3b9e16cde4d674dc9f34ab2dffb848cd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QRegExp matching methods modify the object, which we don't want to. In
particular, when we receive a QRegExp from the user or we store in a
context that might require thread-safety, make sure we make a copy
before using it.
QRegularExpression has no such shortcoming.
Task-number: QTBUG-25064
Change-Id: If119e06221ca99e57c5ad1a1d4cc6468e9f68c7b
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
These tests were disabled when trying to get CI working on Mac OS
because they asserted or crashed. Now that CI is working well on Mac
OS, start running these tests again, initially as insignificant tests.
CI results will then be used to determine whether the tests can be made
significant.
Change-Id: Ife411e6b8c84ade45c865ef35f3ae0071d6f8d2b
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QObject is no longer exception-safe and there's no one working on
improving this, so let's not block innocent commits because of this
failure.
QObjectPrivate's constructor initialises the
QObjectPrivate::threadData member to null, but the destructor
dereferences it unconditionally (the member is initialised in the
QObject constructor). That means QObjectPrivate is not exception-safe
by any definition and, so, anything depending on QObject is not
exception-safe.
Change-Id: If9d5004630b7ce2fb357e328627794caad67564f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test has one stable failure. Mark that failure with QEXPECT_FAIL
and re-enable the test.
Task-number: QTBUG-22815
Change-Id: I38445b659235076b00d9dd82d2a824d1caa1439b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has one stable failure. Mark that failure with QEXPECT_FAIL
and re-enable the test.
Task-number: QTBUG-22812
Change-Id: I1e1ad63472db7ba724c9936ae718de0b3b078bbd
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has not failed in the last 400 CI builds.
Change-Id: I22b59565a6a6cb48653bd9b0d967abbf074d59a4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Otherwise, the order of updating of the indexes will cause
inconsistent results because it will rely on ordering within a
QHash (which is indeterminate).
Task-number: QTBUG-25325
Change-Id: I7d99578c8ee2954b8562dc5aff7dc32e74d41fb5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QT_NO_STL is now no longer defined, so remove the conditionals and
select the STL side.
Change-Id: Ieedd248ae16e5a128b4ac287f850b3ebc8fb6181
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The use of any broken-down components of the query now needs
QUrlQuery.
The QUrl constructor and toString() are now rehabilitated and the
preferred forms. Use toEncoded() and fromEncoded() now only when we
need to store data in a QByteArray or the data comes from a QByteArray
anyway. Change to toString() or the constructor if the data was in a
QString.
Change-Id: I9d761a628bef9c70185a48e927a61779a1642342
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This adds checks to ensure Q_ALIGNOF is returning the desired alignment
for explicitly-aligned types.
The alignment check is now inlined in the test inside QCOMPARE so we get
slightly more informative errors:
FAIL! : tst_Collections::alignment() Compared values are not the same
Actual (quintptr(&it.value()) % Value::PreferredAlignment): 64
Expected (quintptr(0)): 0
Loc: [tst_collections.cpp(3384)]
In this case, this is enough to notice "non-native" alignments are being
requested. Having test parameters otherwise hidden in template arguments
doesn't help the situation.
Change-Id: I05267fd25b71f183cfb98fb5b0a7dfd6c28da816
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The intent is to force instantiation of template container classes and
semantics or behaviour are otherwise irrelevant in this context.
tst_collections.cpp:3036:15: warning: inequality comparison result unused
tst_collections.cpp:3037:15: warning: equality comparison result unused
tst_collections.cpp:3100:15: warning: inequality comparison result unused
tst_collections.cpp:3101:15: warning: equality comparison result unused
Change-Id: I70ad38b18dcbc43879e36a34b1da460aee5f7b07
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Commit 5e9089135b had some problems:
* It left out the cast to IServiceProvider in the refactoring of
QueryInterface. This broke IAccessible2.
* It also failed to enable the codepath for MinGW inside wrap(), which
effectively caused MSAA for MinGW to be disabled.
It also adds an autotest to the bridge (finally). It is simple,
but it should help avoiding committing stuff that completely breaks
the bridge.
Change-Id: I459d89c3bdb93e54ddea85872b50fc1dba0fe4a0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Both QWindow and QWidgetWindow should update with the
active state signal.
Change-Id: I0219f803aa0fb109765f0faa0aedb120c2a439f0
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Added a new accessible interface for QGroupBox, as QAccessibleDisplay
is not good enough when the QGroupBox is checkable.
AccessibleFactory was modified to return a QAccessibleGroupBox when
the accessible interface of a QGroupBox is requested.
Created tst_QAccessibility::groupBoxTest
Port to Qt5 of the patch by José Millán Soto <fid@gpul.org>
Change-Id: I6c23dcf5562b3ea269b04102e78463b65827188a
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
(cherry picked from commit c03ceb203c65d9e3485fad848bfc0c4b6ee3e9aa)
The bridge can do the mapping to and from screen position.
This is now done in the windows bridge.
Change-Id: I5ca5df0fbeeb58202539f55a0f62717fb1685092
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
QWorkspace had been called Q3Workspace before Qt4.0 finally released.
In a sense, it is a Qt3 support Widget. And QWorkspace has been
deprecated and replaced by QMdiArea at Qt4.3.
Change-Id: Iea1bf831c9960c23c2b21d51fdc7c13b303642ea
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This completes 6c98fd2, for systems where default codec is not UTF8.
Change-Id: I94795785d5d172558c40c06bd3ef4ffaba1624c5
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
The Lancelot raster painting autotest assumed latin1 encoding of the
QPS scripts files, while the script engine would import subscripts
as UTF8. This fix standardizes on UTF8.
Change-Id: I9e7c1ee7b6ffe77ff68edc8423f00dfb9ab3e95b
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
This makes the api cleaner and generally the child should not be there.
It is only sometimes more convenient not to create a QAccessibleInterface
instance, so the functionallity is kept.
Change-Id: I26018a6d3e0549f4d79856775b4167c5660e229d
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Also make the handling of events in the test pointer
based since mac-g++ doesn't seem to like const
references the way they were before.
Change-Id: I7fe39978d4729b8e586be30978b74aa51ca7cfe6
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
C++11 adds cbegin()/cend() functions for the same reason Qt has
constBegin()/constEnd(). This patch adds these functions to the
Qt containers with the same implementation as constBegin()/constEnd().
It also fixes the return types in the documentation of existing
constFind() functions (documentation only).
C++11 only adds cbegin()/cend() (and crbegin()/crend(), which Qt doesn't have).
In particular, it doesn't add cfind(), so I didn't supply these, even though
Qt comes with constFind().
This is a forward-port of https://qt.gitorious.org/qt/qt/merge_requests/1365.
Change-Id: Ida086b64246b24e25254eafbcb06c8e33388502b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These issues are permitted to go unfixed for ARM and MIPS, for the time
being.
Change-Id: Ibdf33dc42e3de19ef20e9dc50f12f451ea6dbf23
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
GCC complained about undefined behaviour when
deleting subclasses of AbstractTester through
pointers to AbstractTester, and it's doing so
correctly...
Change-Id: Ie641281d8aafe32c5c9784e8aa39672ff0b699c7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
