The use of clock_gettime() is limited to systems having _POSIX_TIMERS
defined, however OpenBSD implements clock_gettime() but does not have the
posix define. Enable using clock_gettime() on OpenBSD as well.
Change-Id: I785954fe61b42b15755ca625a766c9a95179ae8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On FreeBSD, the gcc manpages until Release 5.1 mentioned using
the -D_THREAD_SAFE define when using -pthread. This has been obsoleted
and the gcc manpages from Release 5.2 onwards have this removed.
Now we finally remove this historic relic here, too.
Change-Id: I00a5b688c56f46b938c0806fb44b72d5afe5079e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By using commmon/gcc-base-unix.conf and common/g++-unix.conf most of
the contents of the qmake.conf for OpenBSD can go. The QMAKE_LFLAGS_UNDEF
are reset because the linker can't handle environ in libraries, which is
only added to libc in OpenBSD 6 (http://www.openbsd.org/faq/current.html)
even when explicitly adding -lc to QMAKE_LIBS.
See
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151102/309783.html
for similar questions on using -Wl,-z,defs instead.
Change-Id: I6c725fb3bc7ae63270912b07f230a480c9157dfd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By using common/gcc-base-unix.conf and common/g++-unix.conf most of the
mkspec details can go, leaving us with a minimized qmake.conf.
Change the default X11 location to point to /usr/X11R7 after NetBSD
switched to X.org in Release 5.0 by default.
Also change the default location for addon software on NetBSD, it uses
pkgsrc as its ports system which installs to /usr/pkg by default (the
default value for $LOCALBASE of pkgsrc on NetBSD), see
https://www.netbsd.org/docs/pkgsrc/using.html chapter 4.1.
These default values mirror the current state of NetBSD usage to get
the prerequisites to compile Qt with a minimum amount of configure
parameters.
Tested with NetBSD 7.0 using gcc 4.8.4-nb2 (system compiler)
Change-Id: Ic50757af9f070c0383c7356302e7e7686f031740
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modern SSD drives no longer have short file names enabled, causing
the test to fail.
Task-number: QTBUG-29403
Change-Id: I2e9866d8f8a6ed3df9d2dc6630b8cfa47ade0728
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Limit the macro #ifdefery and allow for more test cases.
Task-number: QTBUG-53712
Change-Id: I2c185efc7c3b8fcd0217d2021bd98ab6044b5aee
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Some methods were already marked, this adds noexcept to even more methods.
Change-Id: I420bb1cc985058c7976ce3a1f251fadbba7ddceb
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The code dealing with shortcut overrides omitted this value from the
checks. If the user had a shortcut installed with a key sequence matching
MoveToStartOfLine, then that would result in the line edit not moving
the cursor at the beginning of the line (unlike other similar sequences).
Change-Id: If2e780068b3139390c79285d2205cc89285ba8b5
Task-number: QTBUG-52796
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
This makes the hash algorithm play nicely with qDebug.
Change-Id: I6db651cd5c73e8be65442dd68d6b865dcb975f4c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The \fn command to specify the function signature is not needed when
the documentation precedes the function itself.
Change-Id: I9de0d1ae73af443f0beded77538d62cea85b5e72
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
This is not being used anywhere anymore.
Change-Id: I4d8ded9e9f6c28b594930bd1ea9347ba2db8a2e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
CFG_WEBKIT is never set to anything (removed in 1b716724f, 2012),
so simply remove the dead code path.
Change-Id: I63ef7cc6a2bf2fbf9ceb63f1a54e28882ec6e01e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Old versions of OpenBSD and NetBSD mkspecs had the QT_AOUT_UNDERSCORE
define declared in their qplatformdefs.h to support systems still
using a.out format. As those systems are long obsolete and the defines
are removed, remove the obsolete code, too.
Change-Id: Ia9e2f2d6de81fb182ef4c995b29062afe570b8b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- This is more readable in my opinion.
- Fixes the bug where configure script would fail in certain
cases for CFG_XCB="auto" by complaining of missing xcb
dependencies. "auto" should not fail, in case of missing
dependencies it should set CFG_XCB to "no".
- Error messages are more accurate.
Task-number: QTBUG-47624
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I0572be4ad441931b7c771246bbd70f819d810d22
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This gets included by Qt Wayland and will cause warnings there.
Change-Id: I3bb470d42ace4e6195d33019f81fa72f3006fc7f
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The test sent a message and hoped that the "delete server" would cause
the server object in the QDBusConnectionManager thread be deleted before
it could receive and process the message. That's racy, because on some
CI machines, it did and then sent back an error reply indicating the
object sought was not found.
Instead, let's use a child process that we can kill to make it exit at
the right time.
I've chosen to use dbus-daemon itself, because that lets us test the
actual conditions that triggered the original bug: the daemon getting
killed during a desktop session shutdown on Linux.
Change-Id: I87e17314d8b24ae983b1fffd1454483aea87c921
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Do not override the requested font-weight. This was a wrong rewrite of
a now redundant if-statement.
Change-Id: I20a745cac02d896fdeaa853f20c6b6647084fceb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Output the class hierarchy until a base class within QtWidgets is found.
Change-Id: I0ecee22e2ead1dea8b39cce8ca2f0739290aac22
Reviewed-by: Alexandru Croitor <alexandru.croitor@theqtcompany.com>
The test leaks a file (named qt_...xxx) in QDir::tempPath(). Moreover,
when tests fail, it can happen that more files are leaked and subsequent
runs do not recover since the check for non-existence of those files fails.
Change-Id: Iaea6d09ee7c271903a1b9c63e263c19f9e90bba9
Reviewed-by: David Faure <david.faure@kdab.com>
It tested whether a paint event was received when calling QWidget::repaint()
right after QWidget::show() without waiting for the window to be exposed.
This caused a QEvent::UpdateRequest to be sent, which ended up in
QWidgetBackingStore::sync() which returns after checking
QWidgetBackingStore::discardSyncRequest(), since Qt::WA_Mapped is not set
on the non-exposed widget.
The test passed on Windows since it contains one call to
QCoreApplication::processEvents() which causes the the initial WM_PAINT
message to be processed in QWindowsWindow::handleWmPaint() which calls
QWindowSystemInterface::flushWindowSystemEvents() and causes Qt::WA_Mapped
to be set. This seems counter to the intention of the test.
Remove the test since it won't pass anymore in Qt 5 unless Qt::WA_Mapped is set.
Task-number: QTBUG-26424
Task-number: QTBUG-38327
Task-number: QTBUG-39842
Change-Id: Iede026d52825dcf1f2e9014a316d26d260309214
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
While probably valid, these warnings are beyond the
user's control, and more likely a sign of Qt's own
expectations or misbehavior. So, we should not annoy
the users with them.
This change introduces the same logging category as
3ee01f7403 in 5.7 as is a partial backport to
simplify a subsequent 5.6 to 5.7 merge.
Change-Id: Ica2e3b1c5bc372923fd823b5d7d537d319835685
Task-number: QTBUG-42846
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Passes locally (on 10.10), but seems to have become
unstable on the CI system.
Task-number: QTBUG-53790
Change-Id: I0432fca4121b97bcdd6cec529fc4e148dfb8c1ab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The two functions are merged and also renamed.
handleConnectionEstablished indicates that the
operation succeeded, but that is not necessarily
the case.
Change-Id: I66a4181a5693353fc9507785a6e6bbb8d5300a4b
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Qt does not support libressl which reports itself as openssl but uses
a high version number. This means that we expect it to have features
that it doesn't and will fail to build. Instead detect this situation
at configure time and disable the ssl support.
Change-Id: I73cca4d1544df2aaca0723c38ba63758c287ec41
Reviewed-by: Ralf Nolden <nolden@kde.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Add the necessary defines for HAVE_PIPE2 for NetBSD and OpenBSD depending
on OS version when pipe2(2) was added. This also fixes the compile error
on NetBSD if -Werror=unused-function for ignore_sigpipe() as the
HAVE_PIPE2 tree is prior to O_NOSIGPIPE in create_pipe().
Change-Id: Ic8f875e34ef826a7bf046c77588afecaa097deca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The current implementation of drag and drop requires Redstone 2 Update
(SDK version 14322) to be fully functional. The API is limited for
previous versions.
However, this mostly affects passing allowed operations between sender
and receiver, the rest is mostly functional still.
Once RedStone 2 is out (estimated July 2016) we can bump the minimum SDK
version to 14322.
Task-number: QTBUG-50827
Change-Id: I5bab9d36a228d68c1809c241a64168d48c353335
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Now that the minimum deployment target (and thus SDK) is 10.9 for OS X
and 7.0 for iOS, all code paths affecting platform versions lower than
the aforementioned are removed.
Change-Id: Id985c7259c4ac069319d88f2c29c9559ae9e8641
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Instead of placing the assignment of false in the impl() function, move
it to the inline QSlotObjectBase::compare() function. That means it's
assigned in one place (two, actually, inside qobject.cpp), instead of
for every static member, non-member or functor we connect or disconnect.
Change-Id: I87e17314d8b24ae983b1fffd1453623ad4c4dcb2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The example directory name for Qt Test module is qtestlib.
Without this change, Qt Creator cannot find the tutorial
files and tags them "broken" in the Welcome mode.
Change-Id: Ib2de0cd2263aa1651abb697f9f03ecd8eb871ca2
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
I don't think anybody would do this today.
Change-Id: Id4eb69fb0a38bbd2a28099b66896e55d2b8c9022
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the test should be executed in every case. configure's use of pkg-config
implies that intention.
Change-Id: I722c88da5c2a0f2cc1f926d796093b78cd79bea8
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Touch does this correctly for some time already. Keyboard and mouse do not, leading
to flooding the console with the Could not read from ... warning for ever when using
the 'static' device discovery (no libudev) and unplugging a mouse or keyboard.
Change-Id: I6bef44fbed4bc21cc2736b28d1166bf2b7d90edc
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This is needed for generic property access to work correctly.
Change-Id: I76613ace730985001fc5fe1bb1b3fa5c6a8bdf70
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These plugins can't be used on Android, but they are built, installed
and also bundled into every .apk file.
Change-Id: I3326c913282af5bd43e1c732de9ae2f255711414
Reviewed-by: Christian Stromme <christian.stromme@qt.io>
This allows external integrations to be developed against it.
Also uniforms all class names as QEglFSFoo.
Change-Id: I72ff37c0fcdf1ccd37110b4c36874d6c99b2e743
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
This commit also reverts fecaa6aae8.
The Microsoft documentation says _beginthreadex and _endthreadex are
used to initialize the C/C++ runtime and are necessary when linking to
libcmt(d).lib (that is, when using the -MT or -MTd options). For regular
builds linking against the .dll runtime, there should be no impact.
Inspection of the CRT source code which gets installed with Visual
Studio or Windows SDK proves that.
It's preferable to use CreateThread directly as _endthreadex will try to
call FreeLibraryAndExitThread, which can cause a deadlock if we try to
wait for the thread to exit from a global destructor.
For -MT builds, since there can be no DLLs, it's not a problem to
continue to use _beginthreadex and follow Microsoft's recommendation.
Task-number: QTBUG-53031
Change-Id: Id5480807d25e49e78b79ffff144af62c3c59dfe0
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Those enumerations and their associates are being deprecated,
and so the backing of their replacements cannot rely on it.
Change-Id: Id544aa757313065f435b5e66cd0475975cd5b825
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's required now in Qt 5.7 (at least the required features of rvalue
references and variadic templates)
Change-Id: I87e17314d8b24ae983b1fffd145364c52f9bb6c3
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... instead of homebrew algorithm.
Saves some memory allocations and some text size.
Change-Id: I3abb49d3b247dbb132688ea99e6eae731e31615c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
