Test that they do expand properly and don't produce errors. This is
templated code, so it doesn't get tested fully unless we instantiate
them.
Also check that the alignments are correct.
Change-Id: I2a8ee2165167f54b652b4227411e209850974b8e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
- Create subdirectories containing profiles to avoid
problems with -fast.
- Use QFINDTESTDATA to locate binary.
- Make it a console application, no Mac-bundle.
- Add error messages to the test, give it a longer time-out
and ensure sub-process is killed if it hangs.
Change-Id: Ibc177b786c4bc8fdbc068a8c45f4801a41c9f660
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reduce the thread and iteration counts to make this test execute faster.
This change reduces the runtime to 14 seconds (from 5 minutes, 38
seconds).
Change-Id: Id5ea056cfd33022da5a06809f0598a5cdb02b27b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The architecture is detected at compile time based on the predefined
macros from the compiler. Don't use QT_ARCH in .pro, .pri, or .prf
files. The PNG_NO_ASSEMBLER_CODE define from libpng.pri is not present
in the current copy of src/3rdparty/libpng, so no change in
functionality is expected.
The conditional for the SUPPORT_JIT define in pcre.pri is moved to
src/3rdparty/pcre/config.h, again so that we can use the compiler's
predefined macros to detect the architecture at compile time.
Replace QT_ARCH_ARM, QT_ARCH_MIPS, and QT_ARCH_SPARC with their
Q_PROCESSOR_* equivalents.
Replace QT_ARCH_INTEGRITY, QT_ARCH_VXWORKS, and QT_ARCH_WINDOWSCE with
their Q_OS_* equivalents.
Note that this commit also effectively disables the SPARC atomic
implementation. An inline implementation for SPARC needs to be added,
or we remove the current code and instead rely on the GCC intrinsic or
C++11 std::atomic support on SPARC.
Note also that this commit does not remove QT_ARCH from configure or
qconfig.h. This will continue to be set until all Qt 5 projects can be
moved away from using QT_ARCH.
Change-Id: I5de747cc4436d21941329974cff3016970f497b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Timers are not entirely precise; if we ask for a timeout of
10000 milliseconds, we might time out in 9999 instead.
Also, we know the expected elapsed time in each case, so do a fuzzy
comparison against that time.
Previously the test was verifying that the elapsed time was greater than
or equal to the timeout in the case where a timeout was expected, which
means the test would not detect bugs which incorrectly caused the
timeout to occur later than it should.
(cherry picked from qt4 commit 9a2573dc13b3e8df6cd15bef64370ea407480fc7)
Change-Id: I91d0c81f989ab43a3c48f6abbb4c5b28e2b35402
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These defines were there to aid in the commercial
licensing scheme we used long ago, and are no longer needed.
Keep a QT_MODULE(x) define so other modules continue compiling.
Change-Id: I8fd76cd5270df8f14aee746b6cf32ebf7c23fec7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Modified unittests to use specific class headers instead of
using super-headers like QtCore that pull in all the headers for
the module.
- Decreasing build time.
Change-Id: I9c3fd0767be15205893bb406f609c8283a2a3a5a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
On Mac, the application's dir is in the bundle, so we need to "escape"
the bundle when looking for the an executable relative to the
application's dir path.
Change-Id: I5c01f7d816ec8cc30f5277202f4eefb0c49a2bc3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
... and deprecate the old registerTimer() functions. The new pure-
virtual registerTimer() breaks source-compatibility. Subclasses cannot
be instantiated anymore, since the pure virtual function signature has
changed.
QAbstractEventDispatcher::TimerInfo is no longer a QPair. It is now a
struct with timerId, interval, and timerType members. This is a source
incompatibility that should only affect subclasses of
QAbstractEventDispatcher, which will need to pass 3 arguments to the
TimerInfo constructor instead of 2. If the subclass used QPair<int,int>
instead of the TimerInfo typedef, the QPair<int,int> declarations will
need to be replaced with TimerInfo.
Call the new registerTimer() function with the type from
QObject::startTimer(). Change all subclasses of QAbstractEventDispatcher
to reimplement the new virtual function. The type argument is unused at
the momemnt, except to ensure that registeredTimers() returns the type
each timer was registered with. Implementations for the various
dispatchers will be done in separate commits.
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: Ia22697e0ab0847810c5d162ef473e0e5a17a904b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is a source incompatible change. There is concern that the
convenience of the implicit cast and assignment operators can lead to
misuse. Several commits have already been done that remove excess use
of the implicit cast, which is a *volatile* read every time it's used.
Users of the QAtomic* API should have to think about when they are
loading the value, and if they do or don't need the acquire memory
barrier on load. The code that people would write using this API is
meant to be multi-threaded, concurrent, and correct. The API should not
allow them to inadvertently, possibly unknowingly, shoot themselves
in the foot.
SC-break-rubber-stamped-by: Lars Knoll
Change-Id: I88fbc26d9db7b5ec80a58ad6271ffa13bbfd191f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In .pro files, removed wince/symbian-specific DEPLOYMENT cases and
replaced them with TESTDATA where appropriate.
In .cpp files, removed SRCDIR and relative paths to testdata and
replaced them with the QFINDTESTDATA macro where appropriate.
Modified test helper apps/libs to install themselves under the test
they relate to.
This change allows corelib tests to be correctly installed, along with
their testdata, via `make install'.
Change-Id: I5e202e2f3b577af7e39072d5c9fe13e0ca125304
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
if given char*, QCOMPARE will try to compare the strings pointed by the
char*
In this case, the char* just point to garbage, we just want to compare
the addresses.
(Was changed in commit 6fcfae99d3)
Change-Id: I9edb2b676aedf67a252aea6a41d56cd1eef7befc
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Commit f4b6628083 fixed it on windows.
Now test it work within QAtomicPtr
Change-Id: Ibf5c31a133d6d544a78ce626fac9085b73c97fd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Bug trackers come and go, so using bug identifiers in function and test
case names will ensure that those names eventually become meaningless.
It is better to choose a meaningful name and provide explanatory
comments where appropriate.
Change-Id: I67c27782ef21b5d4eaab4854079a043c8ef6957b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Make sure to use the Qt namespace for qGlobalPostedEventsCount.
Change-Id: I558a0b0fba1e22a2edd96f9499a2bab82046c4a4
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Use QAtomic*::load() and ::store() instead of the deprecated
cast, assignment, and comparison operators. These will be removed
in the near future.
The tests for these particular operators have not been changed,
though, as the change to remove the operators will also remove
the respective tests.
Change-Id: I2f24d18992af0c6e0f487d707218e4e84f4bdd12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QAbstractEventDispatcher() does no longer install itself into the current
thread. Instead the new methods QThread::setEventDispatcher() and
QCoreApplication::setEventDispatcher() allow to install a custom event
dispatcher into any QThread as long as there is no default event dispatcher
created yet. That is, before the thread has been started with
QThread::start() or, in case of the main thread, before QCoreApplication has
been instantiated.
Change-Id: I7367e13d8d8aebed5a5651260bb69b8818eb1b90
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Remove various disabled and/or non-helpful debugging code.
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure. Diagnostics should also be informative -- simply
printing the value of a variable with no other information about what is
being printed (or why it is being printed) is not informative.
Change-Id: I21a6c2121be86001bb57e80f426507b6e619ee9e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QVERIFY2 to provide better test diagnostics.
Change-Id: I128004f4ee133ceed4d8f373bbbe4a0eee431ebf
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
and isRunning() should return false.
This restore the Qt 4.7 behaviour
In Qt 4.7, the finished() was called with the thread's intenal mutex
locked. Which mean that:
- Call to isRunning or isFinished called from a slot connected to
finish within the thread would deadlock. (Hence no compatibility
to keep here)
- Call to isRunning or isFinished from a slot connected with
QueuedConnection in another thread would lock the mutex until
the destructors are finished. and then return as if the thread have
finished.
Change-Id: I963eccae8f7634aff90cc4bbab6ca886a78e35eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I7c1ffe9c8c294dbdc988e1582e580b1ed3f4593e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The DEPENDS_ON macro didn't do anything and has misled many users to
think that they can write test functions that depend on other test
functions.
Task-number: QTBUG-21851
Change-Id: Ibe65b2d5d88bb81b6a0ebbe0b220f7d409a1446c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I95feba3edbfa092c0ef4d85bb8c6877bd6be698e
Reviewed-on: http://codereview.qt-project.org/6128
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: Ib2025339422749cf216e87ac414a3056250bf8f9
Reviewed-on: http://codereview.qt-project.org/5942
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Most of these changes are search-and-replace of d->ref ==, d->ref !=
and d->ref =.
The QBasicAtomicPointer in QObjectPrivate::Connection didn't need to
be basic, so I made it QAtomicPointer.
Change-Id: Ie3271abd1728af599f9ab17c6f4868e475f17bb6
Reviewed-on: http://codereview.qt-project.org/5030
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>