QKeySequence provides conversion to and from strings. But a similar
convenience was missing for QList<QKeySequence>. It would come in handy
when you want for instance to save/restore the shortcuts of a QAction.
Change-Id: I9e4f2001c58a595392a5019a57c564992c39bf88
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
QStandardItemModel doesn't really benefit from a reimplementation of
sibling, and the current implementation is buggy.
Task-number: 29540
Change-Id: Icf8dca29b6e1394a378db5bf6abd884f2d7fd9b9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Inherits QSurface and allows to use OpenGL from an arbitrary thread.
Platform plugins can implement QPlatformOffscreenSurface, otherwise an
invisible QWindow is used by QOffscreenSurface.
This patch includes an implementation of QOffscreenSurface for XCB
and EglFS platform plugins using pbuffers.
Change-Id: I57b4fc1db417331f34826dcfa754b7698782fde4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
As long as fonts weren't used we supported using QImage in combination
with QCoreApplication in 4.x, and there's no reason we can't continue
doing so.
Task-number: QTBUG-29643
Change-Id: I2cf351d3c93f1c175bbf624e45024d39ab913111
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
QPixmap::load() would not detach, so multiple paths could get associated
with the same QPixmap, causing the wrong pixmap to be shown.
Task-number: QTBUG-29639
Change-Id: I064dd6a9611b5996853bec9fb20b6224a0adcf62
Reviewed-by: aavit <eirik.aavitsland@digia.com>
This finally makes it possible to make windows fullscreen etc from
QML by doing "visibility: Window.FullScreen". I don't see any reason
from not having the API at the QWindow-level instead of at the
QQuickWindow-level since this way it can benefit other use cases too.
Change-Id: If27344306eb563bc2ccd83296a46b1f2862e2db1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This lets you write code like format.version() >= qMakePair(3, 2), and
format.setVersion(4, 2) instead of format.setMajorVersion(4);
format.setMinorVersion(2);
Change-Id: Ib052091cc12865ea0d5db52e468ed6cd28f14840
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
If the high bit in a mask is set, for instance if the mask is
0xff000000, and we shift it to the right by 24 positions, since the mask
was not declared as unsigned we ended up with a mask value of
0xffffffff. We then add 1 to this value and divide by the result,
causing a division by zero crash.
The masks need to be declared unsigned to prevent sign bit extension
when shifting right.
Task-number: QTBUG-29194
Change-Id: I79260344cebfbdd3ea86416a9c734dca76517999
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Revert to the pre highdpi-patch behaviour.
Before, both physical and logical DPI would be based
on the dpmx/dpmy variables, which could be changed
with setDotsPerMeter(). The highdpi patch introduced
separate ldpmx/ldpmy variables, which were not
changed by setDotsPerMeter().
This broke when loading images: setDotsPerMeter
would be called but the logical dpi would not change.
Remove ldpmx/ldpmy. Keep scaling the physical dpi
by the devicePixelRatio, which will be set to 1 by
default.
Task-number: QTBUG-29187
Change-Id: I0d6f5f3b8efae5fb1adc0a50b22a5da78324a282
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Introduces the methods QImageReader::supportedMimeTypes and
QImageWriter::supportedMimeTypes which corresponds to the similar
supportedImageFormats methods, except they return lists of MIME types.
Task-number: QTBUG-28177
Change-Id: Ibb0e264a12eaf972a8bfd6bd891dcd9f89efd085
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This is done to support texture uploads in an image provider. It ensures
we can load the texture using QImage in the image provider, and when
it is later painted as a pixmap, the cacheKey will be identical
(assuming no format conversion was required).
Change-Id: I54229511ed91ce5430cc478af5aff0d96685a2da
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
QRegularExpression counterpart for QRegExpValidator.
Change-Id: Ib391e73dd49e32aeb9b48e6f2217b67a17a83a11
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I95b8b4b674e85b2b3c374931f6231d60f35be984
Reviewed-by: David Faure <david.faure@kdab.com>
With trailing spaces in some cases, we would not get the
"no justification at end of paragraph" special case, and continue
in the code, getting the unexpected case where line_length becomes
< 0 which would lead to memory corruption because we were writing
outside our buffers. I added an assert to catch this type of bug
earlier, and I added the trailing spaces to the test for the end
of the paragraph.
The test case added is one example which would crash.
Task-number: QTBUG-27354
Change-Id: Id720a6fa55dbc709ce04dd5321e55687bf960d75
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
...and remove the outdated QUnicodeTables::Script enum.
QFontEngineData now has one extra slot that never used
(engines[QChar::Script_Inherited]). engines[QChar::Script_Unknown],
if accessed, would be set with a Box engine instance, and could be used
as a minor optimization some time later.
In order to preserve the existing behavior, we map all scripts up to Latin to Common.
Change-Id: Ide4182a0f8447b4bf25713ecc3fe8097b8fed040
Reviewed-by: Pierre Rossi <pierre.rossi@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
A pointer to the data of one qimage is used, with an offset, in a copy.
In the mono case, that could lead to overflow: the last row would
of the copy would stretch 1 byte beyond the end of the allocated
area. Fix by reducing the height of the copy, so that it keeps
within the allocated memory.
Task-number: QTBUG-28322
Change-Id: I09abfc83f738f8af000fc50f8c94f63dba3a6cfe
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
We need to do bounds comparison on the actual offset we're going to use
with _mm_load_si128 to read 16 bytes from memory (even though we won't
use the trailing bytes in the end).
Task-number: QTBUG-28324
Change-Id: Id0d6094da796ca67338d8ad225fa6b2f309bbe6e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This test fails on some setups and a pending critical change
causes the existing bug to trigger in CI. To avoid blocking
other changes because of this bug, it's been marked as
insignificant until such a time when it can be fixed.
Change-Id: Ide41f7b1c76209f9c05f95f996b2364d5dea5e67
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
These tests have been failing on certain setups for a while,
but some new critical changes causes the failure to trigger
on the CI system as well. We mark them as insignificant until
they can be fixed.
Change-Id: I467e7030c55d6f23515275b4062c17068d2b688c
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
There are no proper implementations of this API, and as it stands it
only acts to confuse anyone who stumbles across it. It will be better to
revisit the full cross platform orientation API story for 5.1.
Change-Id: Iff7054a32c6e5e4ad0cc0493a5e4ecc35a6ec4f3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
we were already installing them into QtCore/private, so turn them into
proper private headers to start with. this cleans up our project files.
Change-Id: I0795f79e03b60b5854de9e4dc339e9b5a5e6fd87
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
As 672e7c875e did changing pos() to
position() and setPos() to setPosition().
Luckily there's not much code that uses these.
Change-Id: I1e1982f00412a22bd376e667a5e8c30b6149f9b5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
geometryengine.cpp: In member function 'void
GeometryEngine::drawCubeGeometry(QGLShaderProgram*)':
geometryengine.cpp:159:93: warning: cast to pointer from integer of
different sie [-Wint-to-pointer-cast] geometryengine.cpp:167:95:
warning: cast to pointer f rom integer ofdifferent size
[-Wint-to-pointer-cast]
benchmarking.cpp: In member function 'void TestBenchmark::multiple()':
benchmarking.cpp:85:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
benchmarking.cpp: In member function 'void TestBenchmark::series()':
benchmarking.cpp:120:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
qstandarditemmodel.cpp:2717:45: warning: unused variable 'd'
[-Wunused-variable]
qxcbconnection.cpp: In member function 'xcb_timestamp_t
QXcbConnection::getTimestamp()': qxcbconnection.cpp:930:40: warning:
suggest parentheses around assignment used as truth value
[-Wparentheses]
tst_qguiapplication.cpp: In constructor
'BlockableWindow::BlockableWindow()': tst_qguiapplication.cpp:340:9:
warning:'BlockableWindow::enters' will be initialized after [-Wreorder]
tst_qguia pplication.cpp:339:9: warning 'int BlockableWindow::leaves'
[-Wreorder] tst_qguiapplication.cpp:342:12: waring: when initialized
here [-Wreorder]
tst_qsqltablemodel.cpp:570:10: warning: unused parameter 'value'
[-Wunused-parameter]
tst_qabstractitemview.cpp:1546:8: warning: unused parameter 'index'
[-Wunused-parameter]
Change-Id: I49c88547182e4669cfde2c2536403fc5573ca2da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
remove private->public hack, make it build on all platforms;
replace homebrew testing code with QtTest based one
Change-Id: Iaed93fd21938620e58ae90189456df1b8061f2f5
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
For the special transparent color index, the decoder would skip
writing anything out (thus leaving the pixels at 0 rgba value).
Although correct for later frames, for the initial frame this would
loose the color information for such pixels (which one otherwise
could have made visible e.g. by converting then image to an
alpha-less image format).
Change-Id: I316cefce8f21797feedebfbf98296ad84eaa4b99
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
(cherry picked from qt/c309d424f45dc0e7b62fbbbabf20dbfe355f48a7)
Reviewed-by: aavit <eirik.aavitsland@digia.com>
Abbreviated properties are to be avoided. But all 3 of these
properties are redundant from the QML perspective; and because QRect,
QPoint and QSize are (wisely) not QObjects, it's not possible to bind
to _their_ properties, which make these QWindow properties less useful
than users might assume that they are.
Change-Id: I19c00b54b1d2712f9418e8bcf56e35a8008b89ef
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
windowTitle, windowModality, windowIcon and so on are named that way
to be similar to the ones in QWidget. However QQuickWindow inherits
all of the declared properties, and we would like to have shorter
property names in QML. If you are working with a Window then it's
obvious the title property is the window title. Unfortunately,
there must be patches in many other modules which depend on this one.
In order to avoid the need to merge them all at the same time,
there is also patch https://codereview.qt-project.org/#change,39001
which temporarily adds backwards-compatible accessors, which can be
removed after the other modules are able to build without them.
We should not rename windowState to state, because in QML, state
usually drives the state machine for animation transitions etc.
(although QWindow is not an Item, a user might get confused about it).
Related patches are
https://codereview.qt-project.org/#change,39001https://codereview.qt-project.org/#change,37764https://codereview.qt-project.org/#change,37765https://codereview.qt-project.org/#change,37766https://codereview.qt-project.org/#change,37762
Change-Id: Ie4424ec15fbdef6b29b137f90a2ae33f173edd21
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
A 180° rotation results in a TxScale QTransform with negative scaling
factors (x=-1.0 y=-1.0). This is not properly handled by blitter paint
engine yet, so use software rendering fallback in this case.
This rendering issue can be seen when using "-webkit-transform" CSS
property in WebKit with DirectFB QPA platform.
Change-Id: Iee496b6bf0c90ffe36c4235ceaa2c80f296b2ca4
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
These are useful when QWindow is exposed to QML.
Change-Id: I7ec49ef365183e2c784605889e8ea22c2ef34781
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Using
git ls-files -z | xargs -0 sed -i 's/ \+$//'
in the relevant directories.
Change-Id: I861ef9952fb32ed2db9ec8b67864ec7d0d61f0f2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
