When tabbing/searching for the next focus widget, the current
code would check if the next widget in the focus chain
had a focus proxy, and if so, ignore it. The exact reason
for this behavior is not clearly understood, but some widgets
(e.g QSpinBox) has children (a QLineEdit) that sets the parent
as focus proxy. If we didn't ignore children with focus proxy, tabbing
from a QSpinBox would lead us to find the inner QLineEdit, which
(because of its proxy), would lead us back to the QSpinBox. And
therefore not be able to tab out.
But ignoring the focus proxy has other problems. Normally a focus
proxy is the next sibling to the widget it acts as a proxy for, and
tabbing to the widget will therefore appear correct. But if the
focus proxy is not the next sibling, the logic will fail, since
the tab would anyway give focus to the next sibling. This becomes very
apparent if the focus proxy is a child of the widget, since then
its likely that the focus proxy is not the _first_ child among all
the children. So tabbing to the parent would not give focus to
the proxy.
This patch will change this logic so that you are allowed to tab to a
widget with a focus proxy. But we check that if you do so, you actually
end up moving focus in the right direction. If not, we ignore it like
before. This will ensure that we tab correctly when dealing with focus
proxies, and especially when focus proxies are used to construct
compound widgets.
[ChangeLog][Widgets] When tabbing to a widget with focus proxy, focus
will now be given to the proxy rather than just being ignored.
Task-number: QTBUG-10907
Change-Id: I66d1da5c941fdd984bb2783cc355ca65b553b5dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
They are going to be deprecated soon.
Use a lambda to mimic the adjacent addActions() calls.
Also, I didn't want to add a scope or extend the lifetime
of the return value of actions() until the end of the
function, and
for (QAction *action : actGroup.action())
would detach. I'd've made it a helper function, but it's
used only once, so... a lambda.
Change-Id: I2b3aae463036fd61a9cca7b4ef991b8752869bf3
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This test passes, according to our metrics it kept on failing on 16.04
and on OpenSuse.
This reverts commit d2015b4d06.
Change-Id: Ibe81f848238d9df651a74f9fd82ac636c2c249f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Skip based on support for window activation instead of platform. Makes it clear
why the tests are skipped, and also enables them automatically if we implement
a shell extension that adds support for it.
Task-number: QTBUG-66849
Change-Id: I322aba5ce5f8db651db7b71f223ffacec037c920
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The first replacement had missed objective-C++ code some places ourside
the src dir.
In C-files Q_DECL_NOTHROW is replaced with Q_DECL_NOEXCEPT as we still
need to turn it off when compiled in C mode, but can get rid of the old
NOTHROW moniker.
Change-Id: I6370f57066679c5120d0265a69e7e378e09d4759
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using a style that wants to draw into the layout's margin (like
macOS style does with group box titles), parts of the widgets would be
clipped by the parent if the available margin is smaller than necessary.
This moves the x/y coordinates to at least 0/0, and adjusts width and
height accordingly.
[ChangeLog][QtWidgets][QLayout] Prevent clipping of group box titles
on macOS (and similar styles that draw into layout margins)
Change-Id: I32148a92858c13fb2325da4d0a2a58996e0e8930
Fixes: QTBUG-67608
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
LRESULT on Windows 64 is a 64bit type, adapt filter functions of
QAbstractNativeEventFilter and QAbstractEventDispatcher accordingly.
Fixes: QTBUG-72968
Change-Id: Ie53193e355f0b8e9bd59fa377f43e2b4664a2ded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Speeds up the test from approximately 770ms to 180ms.
Change-Id: I2e5479fd5190b841b44d4a66380d27b1c3b55162
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
This reverts commit 8561281768.
This change needs to be reverted because Windows 10 Creator's
Update doesn't fail on this test anymore during CI runs.
Reason for this is unknown.
Change-Id: Ice250ecedb14ac96fb3693b2d9884ef452a91cc2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
When calling resize() from showEvent(), we'd set the full geometry
on the widget's QWindow. This resulted in the top-level window
being moved to the top-left corner, even though no other call to
move() or setGeometry() had happened before.
The solution consists on calling the proper QWindow methods depending
on whether setGeometry_sys() is called for a move, a resize or both.
Furthermore, this needs QWindow::resize() to set its position policy
to frame-exclusive. The documentation states that is already the case
and we're setting the full geometry on the platform window, so we need
to convey that bit of information.
This also solves the age-old conundrum: "### why do we have isMove as
a parameter?"
Change-Id: I2e00fd632929ade14b35ae5e6495ed1ab176d32f
Task-number: QTBUG-56277
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
This test fails on Windows 10 x64 Creators Update CI builds for unknown reasons.
Change-Id: I766bccfd4dea9ea195c68403018b419e800a7b3b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Scale coordinates in a few places, remove pixmap scaling in
grabWindow() (Windows).
Change-Id: Iba9e5d3ca55422a14eda09c8d04329a455d3acb3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's broken due to tst_QWidget::testDeletionInEventHandlers,
but the root cause is not known yet.
Task-number: QTBUG-61986
Change-Id: I5b77efaf6910123d10a1456c54b873100e538a69
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: I7dbe9c7a91301e0002f9e1827f6d0b495d2b9ec5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test assumes that resizing a QWidget to 0x0 will result in the
QWindow ending up with that size, and hence not being exposed, but
this is not the case. On a QWindow level we treat 0x0 as a trigger
for the platform layer to set the default size, and the window
ends up exposed.
Ideally QWindows should allow 0x0 sizes, but this is a bigger change.
In the meantime, we skip the tests so that other changes can be
integrated without the test failing.
Task-number: QTBUG-61953
Change-Id: Ib17187b4afd1b06eaa76653be18e93abea555b59
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
It's failing for inexplicable reasons not only on 10.10 but also 10.11.
Task-number: QTQAINFRA-1317
Change-Id: Id316764443dfe9e0ae30e2d25d8bae73fa255617
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
FAIL! : tst_QWidget::restoreVersion1Geometry(geometry.dat) Compared values are not the same
Actual (((widget.pos()))): QPoint(90,90)
Expected (expectedPosition): QPoint(100,100)
Loc: [tst_qwidget.cpp(3193)]
Remove the previously added QSKIP since this test now passes.
Task-number: QTBUG-26421
Task-number: QTBUG-46116
Change-Id: Ieff474a8a69c14a0df231a9a587aee02df4e8ea7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's the subdir where the implementation also lives. There's no
src/widgets/gestures, either.
Change the mac: into a darwin: scope in the .pro file, so Sanity Bot
does not complain.
Change-Id: I7608d6da05af4a1117db585798a87a20ae80717a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It was grabbing a QLabel without accounting for the size of
the window in the case where the DPI is larger than 1:
FAIL! : tst_QWidget::translucentWidget() Compared values are not the same
Actual (actual.size()) : QSize(32x32)
Expected (expected.size()): QSize(16x16)
Change-Id: I4873f3c6364ee2696f5612d91e6c97c60b2cd915
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QWidget has its own setVisible() code that needs to
be run in order to correctly transition widget visibility.
It is desirable to be able to show and hide (native)
widgets also from the QWindow side, for example from
the platform plugin, or from generic QWindow handling
code in QtGui.
Add a new virtual QWindowPrivate::setVisible() and
move the QWindow visibility implementation there.
Subclasses can now override this function to add custom
code.
Make QWidgetPrivate::show/hide_sys() call the QWindowPrivate
setVisible implementation instead of the QWindow setVisible
public API.
Change-Id: I082f174b100659e1221d5898b490f8a9f498abdf
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
CI metrics show that this test was flaky ~38 time in 3 days.
The problem is old: after we get a surface, a window manager can still
decide to re-position the window.
The fix is to simply send the touch event in a position where it is sure
to hit the window (usually the offset is the title bar height).
The blacklisting seems to not have worked, I could reproduce the failure
on a linux/xcb machine.
Change-Id: I5229fe020ba75c984fd3b6c322ad00d769707573
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Some features are not implemented by "offscreen" platform. Skip tests
failing because of that. Some failing cases are also already skipped or
blacklisted on "xcb" platform.
Change-Id: I17269169379c270bd7d6f2ddda03ad9b114a71ce
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
tst_QWidget::updateWhileMinimized has been failing on Ubuntu 14.04
and was already blacklisted there. Now we extend it to cover Ubuntu
16.04.
Task-number: QTBUG-46116
Change-Id: I6758657cca46bb4c76cddb0298f9b87b8a43655b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Fix the condition in QWidgetPrivate::resolveLocale() to decide whether
to propagate locale: make it match setLocale_helper()'s condition when
deciding whether to propagate to descendants. This lead to a
QDateTimeEdit's calendar popup not getting told what locale to use
correctly, unless we setLocale() on it overtly, which then blocked
propagation of locale changes to it unless QDateTimeEdit manually
propagated the changes.
Fix the documentation of WA_WindowPropagation to mention locale as
also being propagated (which it was in several places, only neglecting
this one in resolveLocale).
[ChangeLog][QWidget][Qt::WA_WindowPropagation] Propagate locale
consistently, along with font and palette, within the widget
hierarchy. Previously, locale was propagated on ancestral
setLocale(), but not on creation of the descendant.
Task-number: QTBUG-59106
Change-Id: I92270f7789c8eda66a458274a658c84c7b0df754
Reviewed-by: David Faure <david.faure@kdab.com>
This reflects QWidget API, and restores some behavior from Qt4.
Some WM can have several state at the same time. On Plasma for example,
when a window is both maximized and minimized, the "maximized" checkbox
is checked from the taskbar entry.
The API of QPlatformWindow was changed to take a QFlag and the platform
plugins were adapted.
- On XCB: Always send the full state to the WM. And read the full state.
- On Windows: The code was originally written with '&' in Qt4, and was changed
to == when porting. Some adaptation had to be made so the states would be
preserved.
- On macOS: Only a single state can be set and is reported back for now,
with the possibly to expand this in the future.
- Other platforms: Just do as before with the effective state.
Task-number: QTBUG-57882
Task-number: QTBUG-52616
Task-number: QTBUG-52555
Change-Id: I7a1f7cac64236bbd4c591f796374315639233dad
Reviewed-by: Gunnar Sletta <gunnar@crimson.no>
Reviewed-by: Robin Burchell <robin.burchell@crimson.no>
It's a Qt 3 compatibility vehicle, and as such inherits the now-alien
property to distinguish empty and null strings. Particularly worrisome
is the following asymmetry:
QString("") == QString::null // false
QString("") == QString(QString::null) // true
Instead of fixing this behavior, recognize that people might use it as
a weird way to call isNull(), albeit one that once was idiomatic, and
simply deprecate everything that deals with QString::null.
[ChangeLog][QtCore][QString] QString::null is now deprecated. When
used to construct a QString, use QString() instead. When used to
compare to a QString, replace with QString::isNull().
Change-Id: I9f7e84a92522c75666da15f49324c500ae93af42
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Carbon is deprecated and we should not rely on it at runtime or compile
time. These headers were only included for a small collection of
keyboard key constants which have now been hardcoded instead.
Change-Id: Ia2eaa267584b63be8019be3bbf64cba897a985a8
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
For the windows file system engine, we add an extra macro to use
library loading if configured to do so, but avoid it on WinRT, as
none of the symbols would be found.
We also QT_REQUIRE_CONFIG(library) in the library headers and
exclude the sources from the build if library loading is disabled.
This, in turn, makes it necessary to clean up some header inclusions.
Change-Id: I2b152cb5b47a2658996b6f4702b038536a5704ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If a floating QWidget has a parent on a different screen, its DPI was
still inherited from the parent instead of taken from the screen.
The only reason we did was in case there is a customDpi set.
(customDpi is a private thing that is only used in designer to change
the appearance of the previewed widget)
So instead of recursing into QWidget::metric for each ancestor, just
use a for loop to find if one parent has a customDpi. If no customDpi
is found, then return the DPI of the right screen.
Task-number: QTBUG-58959
Task-number: QTBUG-48242
Change-Id: Ie6e9e48cdd10234994c0919ba3aea9b0cdb52494
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The implementation now uses the relaxed-constexpr
qCountTrailingZeroBits() function from QtAlgorithms, making the
QSizePolicy(Policy, Policy, ControlType) constructor constexpr on
C++14 compilers. The explicit check for DefaultType remains to keep
the constructor C++11-constexpr when called with just (Policy,
Policy).
Extend the constExpr tests a bit.
Change-Id: I59690f0921d9bdee08e3615d0d1f4a9b92870c32
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Embeddeding a QWindow via QWidget::createWindowContainer() fails to
deliver the SurfaceAboutToBeDestroyed event. This breaks any OpenGL
or Vulkan based QWindow that releases resources upon this event, and
is particularly critical with Vulkan where the only way to do properly
ordered swapchain - surface cleanup is via this event.
In the non-embedded case close() eventually ends up in an explicit
destroy() in QWindow. In the embedded case destroy() only gets called
from ~QWindow. This then silently breaks since the subclass' reimplemented
event() virtual is not getting called anymore.
To remedy the problem, simply add an explicit destroy() to
QWindowContainer.
Task-number: QTBUG-55166
Change-Id: I1671e8f4d39f6c44e19eca7b9387f55fe3788294
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Ensure that tablet moves are delivered iff tabletTracking is true.
Task-number: QTBUG-26116
Change-Id: Iaa360e181f0c6484cfbde6fa5365f2f0dc77433a
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Unfortunately, that ctor also takes a ControlType argument (defaulted),
and calls the non-constexpr, non-inline function setControlType().
In order to make at least the two-arg version constexpr, I added
a use of the ternary operator to check for type == DefaultType,
making all calls of the ctor that use type == DefaultType
constexpr. For init'ing an aggregate type without ctor in the
ctor-init-list, I needed to require uniform initialization, too.
C++11-style constexpr cannot call void functions, so I needed
to extract the transformation part of setControlType() into a
new function that returns the result instead of storing it directly.
Saves a surprising 2K in QtWidgets text size on GCC 4.9, AMD64 Linux
stripped release builds.
Change-Id: Ib4adf5fd6e54d5345dbfe1c298554278faf13c58
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
I didn't even try to understand what the old code was trying to do;
once you're told by a user that the code is wrong, you see that it is.
Fixed by just using the row as passed to takeRow() instead of trying
to do some storage-index calculations. The m_matrix indexing operator
does it all for us.
Added a test that checks that the expected field widget gets
returned. Fixed expected test data that was wrong, and just checking
that the implementation behaves as implemented, instead of as
documented.
Amends change 8fbae648db.
[ChangeLog][QtWidget][QFormLayout] The functions takeRow() and
removeRow(), new in 5.8.0, now take and remove the correct row.
Task-number: QTBUG-58693
Task-number: QTBUG-15990
Change-Id: I7185ccbc6c03e2579741cad5c0c821d3ed165474
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In some situations, this allows for nicer code. It's also possible to
make this constexpr in C++11, whereas the mutable transpose() would
require C++14-style constexpr.
The new function should also be faster, since it just swaps the member
variables.
Because of constexpr-function limitations, the way the return value is
constructed needs to depend on the level of the compiler's C++11 support.
This is not the only class that requires uniform init to provide a fully
constexpr interface (QUuid and QBasicAtomic come to mind), so this should
probably be generalized across Qt at some point.
Added tests.
[ChangeLog][QtWidgets][QSizePolicy] Added transposed() method.
Change-Id: Ic1077a0d5a861e7c63bd1daeeb42b97c3a2f71ef
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Also add a basic test for constexpr expressions involving QSizePolicy.
GCC < 4.8.0 has problems with initializing variant members in constexpr ctors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54922
Instead of revoking its Q_COMPILER_CONSTEXPR, which is a source-incompatible
change, simply note the fact so we can selectively provide constexpr for
QSizePolicy.
Change-Id: Iba8e5a7cdf847d73e8e2b6bb6211fb3c9846aa0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLayout::replaceWidget() doesn't delete the affected item, but returns it.
Change-Id: Ibda96e4bf2432ad13ed2908c7d37547f46e29a37
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Updating the focus child means the focus object of the window has changed.
We need to report this to QtGui immediately so that it can e.g. inform the
input context of the new focus object, before widgets reacting to the focus
events start calling update() on the input method.
Change-Id: Ie3f7b835591e71519e3f384c2abdad53242c9736
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This new function does the same as newRow(), except that it has a less confusing
name (in line with _add_Column()), and accepts printf-style arguments to avoid
the need to newRow(qPrintable(QString::asprintf())), a common pattern in client
code. It uses qvsnprintf() under the hoods, avoiding the need for the QString
const char* round-trip.
Port all in-tree users of newRow(qPrintable(QString::asnprintf())) to the new
function.
Change-Id: Icd5de9b7ea4f6759d98080ec30f5aecadb8bec39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
.. instead of manually casted 0s.
QCOMPARE(., nullptr) was added for Qt 5.8. Make use of the new API.
In tst_qwidget.cpp, as a drive-by, change
qApp->focusWidget() -> QApplication::focusWidget()
Change-Id: I1331b8916b026d48e01534d1ed0b3d72f3f3d50c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Analogous to QWidget::setAttribute(), introduce an API to easily
enable/disable a single window flag without having to resort to
w.setFlags(w.flags() | Qt::NewFlag).
Change-Id: Ib0f7254a34c8d884cdec181c41b99e5ef035d954
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
The code coerced a -123 into a QFormLayout::ItemFlags, which, however,
being an enum with enumeration values 0..2, only has valid numerical
values 0..3.
Fix by using 3 as the value to represent the invalid enum value, and
store this in a constant so as not to distribute this magic number
all around the test class.
Change-Id: Ie5e93a69ef5a3acdde43030b022e0cce8aec484d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The new takeRow() functions return a pair of pointers to
QLayoutItems and, as the name particle 'take' suggests,
releases ownership of these layout items. Which in turn
means that the caller of the function is supposed to deal
with them.
This was not done here.
To fix, write a RAII class that takes ownership of the
returned layout items, deleting them when it goes out of
scope or gets a new value assigned (only move special
member functions are implemented, making the class move
-only).
Deleting the QLayoutItems is not so easy, though:
QFormLayout has a special function for clearing the
QLayoutItems out, so it appears that just calling their
destructors is not going to fly (though I don't know off
the top of the head why that should be a problem).
Solve this, for now, by adding the layout items back into
a temporary QFormLayout for destruction.
Change-Id: If862989207b20f1e3f757c19ec9d498c4491184f
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The usual:
- delete return values of QLayout::takeAt(), replaceWidget()
- delete styles
- delete top-level widgets
- delete actions
Either by naked delete, QScopedPointer or allocation on the
stack instead of the heap.
This fixes the remaining errors in GCC 6.1 Linux ASan runs of
tests/auto/widgets/kernel.
Change-Id: I8cc217be114b2e0edf34ad8d60dbf722f900bb7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also bump minimum required Qt version for Android: Ministro updates.
Conflicts:
src/android/java/src/org/qtproject/qt5/android/bindings/QtActivityLoader.java
src/android/java/src/org/qtproject/qt5/android/bindings/QtLoader.java
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: I966f249bebf92da37bfdeb995ad21b027eb03301
Found by UBSan:
tst_qwidget.cpp:10207:29: runtime error: member access within address 0x6060000e8880 which does not point to an object of type 'EnterTestModalDialog'
0x6060000e8880: note: object is of type 'QWidget'
eb 00 80 45 10 4b 32 ab 11 2b 00 00 80 df 08 00 60 61 00 00 c0 4c 32 ab 11 2b 00 00 00 00 be be
^~~~~~~~~~~~~~~~~~~~~~~
vptr for 'QWidget'
#0 0x6ca13f in EnterTestMainDialog::eventFilter(QObject*, QEvent*) tst_qwidget.cpp:10207
#1 0x2b11b8bc90c3 in QCoreApplicationPrivate::sendThroughApplicationEventFilters(QObject*, QEvent*) qcoreapplication.cpp:1081
#2 0x2b11a3c49b4a in QApplicationPrivate::notify_helper(QObject*, QEvent*) qapplication.cpp:3716
#3 0x2b11a3c8ec72 in QApplication::notify(QObject*, QEvent*) qapplication.cpp:3704
#4 0x2b11b8bccd0f in QCoreApplication::notifyInternal2(QObject*, QEvent*) qcoreapplication.cpp:988
#5 0x2b11aea5c34d in QCoreApplication::sendEvent(QObject*, QEvent*) qcoreapplication.h:231
#6 0x2b11aea5c34d in QGuiApplicationPrivate::_q_updateFocusObject(QObject*) qguiapplication.cpp:3690
#7 0x2b11aea61360 in QGuiApplication::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) .moc/moc_qguiapplication.cpp:177
#8 0x2b11b8d1dc86 in QMetaObject::activate(QObject*, int, int, void**) qobject.cpp:3787
#9 0x2b11aea784a3 in QWindow::focusObjectChanged(QObject*) .moc/moc_qwindow.cpp:760
#10 0x2b11a3fb24f2 in QWidget::clearFocus() qwidget.cpp:6705
#11 0x2b11a3fc87b1 in QWidget::~QWidget() qwidget.cpp:1608
#12 0x2b11a526688c in QDialog::~QDialog() qdialog.cpp:352
#13 0x6c43e2 in EnterTestModalDialog::~EnterTestModalDialog() tst_qwidget.cpp:10160
#14 0x6c43e2 in EnterTestModalDialog::~EnterTestModalDialog() tst_qwidget.cpp:10160
#15 0x492be3 in EnterTestMainDialog::buttonPressed() tst_qwidget.cpp:10188
#16 0x492be3 in EnterTestMainDialog::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) .moc/tst_qwidget.moc:2056
#17 0x2b11b8d1dc86 in QMetaObject::activate(QObject*, int, int, void**) qobject.cpp:3787
#18 0x2b11a45cb833 in QAbstractButton::clicked(bool) .moc/moc_qabstractbutton.cpp:307
#19 0x2b11a45cd54b in QAbstractButtonPrivate::emitClicked() qabstractbutton.cpp:411
#20 0x2b11a45df73a in QAbstractButtonPrivate::click() qabstractbutton.cpp:404
[...]
#41 0x6bb2cf in tst_QWidget::taskQTBUG_27643_enterEvents() tst_qwidget.cpp:10249
[...]
Fix by checking the event type first, and accessing
modal->button only if it's QEvent::Enter.
Change-Id: I2c7df3a1f43ecbfe14741b5861729078a91a32d6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The slot is invoked from QObject::destroyed(), which is emitted
from ~QObject. By that time the object is no longer a QShortcut,
so the static_cast it invalid.
Found by UBSan:
tst_qshortcut.cpp:1210:53: runtime error: downcast of address 0x6020000289d0 which does not point to an object of type 'QShortcut'
0x6020000289d0: note: object is of type 'QObject'
10 00 80 17 c0 ce 63 df 93 2b 00 00 b0 02 00 00 d0 60 00 00 02 00 00 00 ff ff ff 04 04 00 00 00
^~~~~~~~~~~~~~~~~~~~~~~
vptr for 'QObject'
#0 0x42b3bb in tst_QShortcut::shortcutDestroyed(QObject*) tst_qshortcut.cpp:1210
#1 0x446cc9 in tst_QShortcut::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) .moc/tst_qshortcut.moc:186
#2 0x2b93dba52c86 in QMetaObject::activate(QObject*, int, int, void**) qobject.cpp:3787
#3 0x2b93dba55400 in QObject::destroyed(QObject*) .moc/moc_qobject.cpp:213
#4 0x2b93dba8d80d in QObject::~QObject() qobject.cpp:967
#5 0x2b93c6b6e032 in QShortcut::~QShortcut() qshortcut.cpp:476
#6 0x2b93c6b6e370 in QShortcut::~QShortcut() qshortcut.cpp:481
#7 0x42a5de in void qDeleteAll<QList<QShortcut*>::const_iterator>(QList<QShortcut*>::const_iterator, QList<QShortcut*>::const_iterator) qalgorithms.h:317
#8 0x42a5de in void qDeleteAll<QList<QShortcut*> >(QList<QShortcut*> const&) qalgorithms.h:325
#9 0x42a5de in tst_QShortcut::clearAllShortcuts() tst_qshortcut.cpp:1136
Fix by replacing QVector::replaceAll() with the erase-remove idiom,
which does not require the cast, because it can perform mixed-type
lookups.
Change-Id: I4251c1895fa4398023f489dbfd7108d90c1a6c94
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
We need to delete the style returned from QStyleFactory::create()
ourselves, so put them into a QScopedPointer.
The alternative would have been to create this once, as a member
of tst_QWidget, but this is the minimal approach that ensures
behavior just as the old code, but without the leak.
Change-Id: I527f1031c57be6f05942f4acc057e7dae1af2571
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Found by UBSan:
tst_qapplication.cpp:1754:48: runtime error: member access within address 0x7ffda11f2220 which does not point to an object of type 'SpontaneousEvent'
0x7ffda11f2220: note: object is of type 'QMouseEvent'
The code attempted to model the layout of a QEvent with another class
that allows public access to the memory location that (hopefully)
corresponds to QEvent::spont, gaining access by casting a QEvent
object to that specifically-crafted class.
Fix by the using the existing QSpontaneKeyEvent::setSpontaneous()
call, which, despite its name, works for all QEvent subclasses, and
which has already been fixed to not invoke UB (in bc087db).
Change-Id: I7db8b8a8a823f7d61ab17375142d19dc3874fea5
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In setMinAndMaxSize(), QLayout::removeItem() doesn't actually delete
the removed item. We have to do that ourselves (RAII not necessary,
since the spacer is owned by the layout until we remove it).
In distributeMultiCell(), allocate the QStyle subclass on the stack so
the compiler cleans it up properly on all exit paths (was:
unconditional leak).
Change-Id: I24f8f11af2bfc5abf78f9aab0139dcfe0187402b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In sizeConstraints(), QLayout::takeAt(), as the name suggests, doesn't
actually delete the item. We have to do that ourselves.
Likewise, in replaceWidget(), QLayout::replaceWidget() also doesn't
delete the affected item, but returns it. That's spectacularly bad API
design, but the leak is easy to fix: just delete the return value.
Change-Id: I8dcbc59898949eabce766cda2c0edae2e1f2799e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
5971b88e is not needed in new configure.
This merge also reverts "fix QMAKE_DEFAULT_*DIRS resolution with
apple SDK", 2c9d15d7, because it breaks iOS build with new
configure system.
Conflicts:
mkspecs/features/default_pre.prf
mkspecs/features/mac/toolchain.prf
mkspecs/features/toolchain.prf
src/dbus/qdbusconnection.cpp
src/plugins/sqldrivers/mysql/qsql_mysql.cpp
src/sql/drivers/mysql/qsql_mysql.cpp
src/widgets/widgets/qmenubar.cpp
src/widgets/widgets/qmenubar_p.h
tools/configure/configureapp.cpp
tools/configure/environment.cpp
tools/configure/environment.h
Change-Id: I995533dd334211ebd25912db05b639d6f908aaec
If the sloppy menu popups - send the leave event to the last active
menu (except Cocoa), because only currect active menu gets enter/leave
events (currently Cocoa is an exception).
Check that the menu really has a mouse before hiding the sloppy menu -
don't rely on enter events.
This patch removes some unnecessary synthetic mouse enter/leave events
from QMenu which causes event duplications with different mouse cursor
position.
Refactor sloppy menu timer handling - start or restart timers on mouse
move events. Enter/leave events are not reliable.
Fixes:
- better enter/leave events handling for native widget actions,
- reduce duplicated enter/leave events for menu actions,
- better handle torn off sloppy menus.
Partially reverts: 0ed68f3f58
Amends: 57ecd5aeeb
Task-number: QTBUG-53068
Change-Id: I7ad56ac1619db124915d373fab82d0512d44c90e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Child widgets should get the show/hide event when the TLW changes its
state, because child widgets are also visible or invisible. This
restores the Qt4 behavior (fixes the Qt4->Qt5 regression).
Restoring/minimizing the TLW now sends the spontaneous show/hide event.
Show events are now handled also in the expose event handler in the
QWidgetWindow class, because the show event must occur before the
expose event to avoid possible flicker e.g. the OpenGL content. This
can happen e.g. on XCB platform. If the "WindowStateChange" event occur
before the expose event (e.g. Windows platform) then the code in expose
event handler will be ignored to prevent event duplications.
Added autotest.
Task-number: QTBUG-50589
Change-Id: Ie9a9329b1f29bff876de28d5948d0d5fb6bc1f05
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test is blacklisted already for Ubuntu 14.04, and needs to be
blacklisted for Ubuntu 16.04 too.
Task-number: QTBUG-46116
Change-Id: Ic321a4fd13e00c653e6c387d8a159832173b2eb3
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
one of the effects of CONFIG+=x11 is LIBS+=$$QMAKE_LIBS_X11, so it's
positively pointless for project files to do the same.
Change-Id: I4085acd6254401897b34e131c2cb57f1f76a3638
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It tested whether a paint event was received when calling QWidget::repaint()
right after QWidget::show() without waiting for the window to be exposed.
This caused a QEvent::UpdateRequest to be sent, which ended up in
QWidgetBackingStore::sync() which returns after checking
QWidgetBackingStore::discardSyncRequest(), since Qt::WA_Mapped is not set
on the non-exposed widget.
The test passed on Windows since it contains one call to
QCoreApplication::processEvents() which causes the the initial WM_PAINT
message to be processed in QWindowsWindow::handleWmPaint() which calls
QWindowSystemInterface::flushWindowSystemEvents() and causes Qt::WA_Mapped
to be set. This seems counter to the intention of the test.
Remove the test since it won't pass anymore in Qt 5 unless Qt::WA_Mapped is set.
Task-number: QTBUG-26424
Task-number: QTBUG-38327
Task-number: QTBUG-39842
Change-Id: Iede026d52825dcf1f2e9014a316d26d260309214
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Blacklisting maskedUpdate() to get QtWayland in the CI
Task-number: QTBUG-51399
Change-Id: Iabe8db88c7e0b6138cbbf6acab0964d85fdd2c36
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This patch reduces paint events by removing code which sets native
widgets dirty in QWidgetWindow::handleExposeEvent. Native widgets are
also marked dirty in QWidgetPrivate::drawWidget, so it is enough for
proper painting.
This restores Qt4 behavior when one resize means one repaint for native
widgets. Without this patch the native widget is marked as dirty on
every expose event, so one repaint is from syncBackingStore and second
(or more) is from marking the widget dirty explicitly.
This patch improves performance of native widgets and it also reduces
locks when paint event is v-synced, e.g. on OpenGL swap buffers or on
any other technology like VDPAU, VA-API, etc.
Added autotest for checking number of paint events for native widgets.
Task-number: QTBUG-50796
Change-Id: I4e1649069e2e73d15b038fd1834d0551915252ee
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Replace the pointer member test widge by a widget
instiantiated on the stack where needed.
Remove empty functions.
Change-Id: Ie2da1d88bb23e56e85a2c57cc28220d74c63fae1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use one simple widget of a suitable size per-test instead, removing
the need to reset palettes and fonts and to hide and re-show the
widget.
Task-number: QTBUG-38858
Change-Id: I3096af91ba68e419ad7383e59bcc5838c2363e32
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test passes on OS X now.
Task-number: QTBUG-8941
Change-Id: I7b57dc30ede7c1ed0bcb8bacb458ea56f222d987
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Sheets are no longer transparent on newer OS X
versions.
Change-Id: Iaaed5aea9c9b130a5d991acd36717b76c3927cfb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The Qt 5 unified toolbar implementation does not move
the toolbar to the “non-client” area. This test is
no longer relevant.
Change-Id: Ia32de2260f8ef400a0dc5acf3e5e3ff59083657a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
This patch QSKIPs all tests that:
- take to much time sitting in some QTRY_VERIFY or similar before failing
- result in 'not in fullscreen mode' warning (with PASS) - thus completely flaky.
- Where previously determined to not apply to OS X using QT_OS_MAC
The intent is to make the test run-time more reasonable,
both when running the test locally and on the CI system.
Reduce the BLACKLIST - to avoid a 'double elimination' the tests that are skipped now,
should not be BLACKLISTed so that we fix them for good.
Task-number: QTBUG-52974
Change-Id: I34dc2010d0debc6b5b99f2375a6da902b7a17b29
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Q_OS_DARWIN is the general replacement for Q_OS_MAC,
but most/all of the MAC sections in this test are
OS X specific.
Change-Id: Ic54af9d3dce1e1952a57e15b74acdedf2af60c79
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Pushing the mouse rapidly to the top left corner causes KDE / KWin to
switch to "Present all Windows" (Ctrl+F9) mode, showing all windows.
This has been observed to be triggered programmatically by
QCursor::setPos(0, 0) if there is no other window beneath and apparently
depending on the perceived mouse "speed".
Suppress this by using the bottom right corner for XCB.
Change-Id: Id18d2f45a095ed4d4f365f010cf45a20b0d9435e
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Return pixmaps with device pixel ratio similar to QScreen::grabWindow(),
cf c0963486ce.
Adapt kernel tests accordingly.
Task-number: QTBUG-52137
Change-Id: I9ce276d5e2d87ae0d39c8639267d1ac283fed854
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Removes spacing in QGridLayout when the QWidgets inside of the QGridLayout
are hidden, by checking if the sibling is empty, thus duplicate
spacing can be avoided.
Task-number: QTBUG-52357
Change-Id: I45475e7b264f94ef3bec5f9a4b8cbaa1d53ec6dd
Reviewed-by: Karim Pinter <karim.pinter@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Blacklisting those autotests that prevent us to get RHEL 7.2 in the CI.
The same tests have already been blacklisted for RHEL 7.1.
Change-Id: I2aa62647f7bd75681ea9e1d69bc62f9542fda5e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
QFormLayout currently allows to remove a row only through takeAt, which
doesn't resize the internal structure used to store the layout-related
data. The implementation of rowCount uses that structure so it returns
a row count that doesn't match what the user sees.
The removeRow methods complement that be doing a "real" removal which
will also keep the row count in sync.
[ChangeLog][QtWidgets][QFormLayout] Added removeRow(), takeRow().
Task-number: QTBUG-15990
Change-Id: I204b219a837887e4bf95d1bc77407f1c53ae9819
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The header defined a macro QTEST_NO_CURSOR depending
QT_NO_CURSOR or obsolete platforms Windows CE and Meego.
Replace usages by QT_NO_CURSOR in the tests.
Change-Id: I3edac88e684d1f932dd3b721bb1c1b3fe9144237
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Removing blacklistings from tests that are now passing.
Change-Id: I00aa1ce286d3e7715fb4bee4a36d0d77049a29ae
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This issue has been solved some time between 5.6 and 5.6.0.
We just make sure to protect against further regressions.
Change-Id: Ic3fdad901ed5f36792ae04b3d65047da95eea668
Task-number: QTBUG-50561
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
A receiver of TouchUpdate and TouchEnd events is determined either
as a widget which has an implicit grab for the touch point or as a
visible widget if there are no implicit grabs. The events are sent
if the receiver has accepted TouchBegin event or if it is subscribed
to a gesture. Before sending the events to the widget they are
delivered to the gesture manager. Thus, in order to detect gestures
for the widget, it must own an implicit grab or be a visible widget.
It can happen that the parent widget is subscribed to a gesture, but
doesn't accept TouchBegin event, as in the case of QScrollArea. Then it
will not get an implicit grab and gesture detection will be impossible.
Activate an implicit grab for such widgets. Also don't send TouchUpdate
and TouchEnd to them, because it's against the documentation.
Task-number: QTBUG-43277
Change-Id: Id767583991def6d76c48ad15eb39af822cad115d
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
The coordinates need to be scaled before calling QPlatformScreen::grabWindow()
On return, set a devicePixelRatio on the pixmap.
Adapt the QWidget test to scale the grabbed pixmaps.
Fixes pixeltool displaying the wrong part of the screen when High DPI scaling
is in effect.
Task-number: QTBUG-46615
Change-Id: I12de7df0da669230cf0fae74f4a42d43f061d5ff
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
Blacklisting all tests, which were failing locally.
Task-number: QTQAINFRA-949
Change-Id: I40c25ab0155b8977596d61297ab252a546515f87
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Rename TestWidget to PaintTestWidget, because this class tests only
whether paint event occurs.
Remove unused variables.
Remove reset() method, because there is no need to reset only one
variable in class method.
Change-Id: I8f442c73598e3431baf2b0433fefc157d3f10ea6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
When the window container already has a window handle, allow embedded
windows to use this handle as a parent. This change will allow proper
window stacking and clipping.
Task-number: QTBUG-50477
Change-Id: I8d656ecb99e0c42ae7a7ac461e5e5b5d801f5493
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When closing a popup dialog using a shortcut, when the popup
was originally opened using a shortcut, the closing-shortcut
would interfere with the state of the first shortcut, and we
ended up sending a key event for the original shortcut.
Task-number: QTBUG-50360
Change-Id: I62e5ddb9ca43b28519ede629775bc0d7598dccc4
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use SW_SHOWNORMAL instead SW_SHOWNOACTIVATE as a parameter to
ShowWindow() to enforce the window to be restored to normal state,
even if the state before minimized was maximized.
Task-number: QTBUG-48449
Change-Id: I9436623b1495f574a72050e50e8b31bfc83ced5c
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ia067cd966bf13506e6ca19925eae3158da027b83
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Prefer QCOMPARE over QVERIFY for equality and use QLatin1String().
Change-Id: If226a0fc7b25be3e6774c7e36ca1e6f99234e5dd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Also re-enable and update the tst_showWithoutActivating test.
Change-Id: Ic7fa9b1bf7637e4661c593aaeabb3220cd4204ff
Task-number: QTBUG-46098
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
If QT_NO_LIBRARY isn't set we cannot test QCoreApplication's library
path functions and none of the plugin and library related tests are
applicable. Also, examples that rely on dynamic plugin loading for
their core functionality obviously don't work.
Change-Id: I2d381ee1bc8d944e1181557895a7e92a364fd778
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use case insensitive comparison and static invocation
of QGuiApplication::platformName().
Change-Id: I8c197c7b4f0669f71c019fbcee09a0f03dfab399
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Cocoa is basically just AppKit + CoreData. Since we do not use CoreData
in Qt, there is no reason to link to it or (transitively) import its
headers.
This is just a mechanical replacement of -framework Cocoa with
-framework AppKit and <Cocoa/Cocoa.h> with <AppKit/AppKit.h>
Change-Id: Ibcfc8a03c0ddff27a67fbc87dd7bd58a4b648956
Reviewed-by: Mika Lindqvist <postmaster@raasu.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
According to history, the test was supposed to verify
the correct parsing of the command line on Windows by the qWinCmdLine()
function in corelib. It did not test anything since the test
application printed out argv[1] instead of
QCoreApplication::arguments()[1]. Since qWinCmdLine() has been replaced
by the WinAPI CommandLineToArgvW(), the test no longer makes sense
and also starts to fail then warnings are printed to the error output.
Change-Id: Idf642783ebb56eaa8fba9004174557485563a84f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
The test checks whether a child window receives
mouse events synthesizes from touch. Enlarge the child
window so that it fully covers the parent and move the
touch point a bit inside so that it is not affected
by window manager positioning issues.
Use QTRY_VERIFY.
FAIL! : tst_QApplication::touchEventPropagation() 'widget.seenMouseEvent' returned FALSE. ()
Loc: [/work/build/qt/qtbase/tests/auto/widgets/kernel/qapplication/tst_qapplication.cpp(2107)]
Change-Id: Ic08e68b1e547cc7148cd8994464fdc2a14ac507b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Sending several key presses with repeat=true should trigger the action
several times, unless autoRepeat is set to false.
Change-Id: I6469bbd78a608a87852554882c1632ce34422662
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
When executing the test in a sequence (as done by make check after
tst_qstackedlayout), tst_QToolTip::task183679 often fails since
apparently the tooltip is hidden when the cursor is near it.
Move to the cursor to the right corner of the widget to fix this.
Change-Id: I3b13239e77cb387f1b1425fab79c8d6faa27b5bb
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Instantiate widgets on stack and add cleanup function for the check.
Change all functions instantiating a QFormLayout without widget on
the stack to use a toplevel widget and pointer variables since
otherwise, the labels automatically created by a call like
QFormLayout::addRow("bla", widget) leak.
Change-Id: I72a7a9c3175b5793a9450c6fcb970012ccd2274b
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Instantiate widgets on stack and add cleanup function for the check.
Change-Id: Ia527c228f9173d1b5aeba94ba4e14e1beba60731
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Gather member variables testWidget, testLayout, w1..w3 and sp
used in getItemPosition() and itemAtPosition() in Helper
class ItemTestWidget.
Remove member variables m_grid, m_toplevel and instantiate the
top level widget on the stack in minMaxSize().
Remove empty slots and functions.
Add a cleanup() test checking that no visible top levels
are leaked with explanatory comment about data driven tests.
Change-Id: Ia30120d78144dab3b7c73864c6fbcef606cb19d3
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Add a cleanup function for the check and disable animations
in tst_qwidgetaction to prevent effect widgets from interfering
(vista style animations).
Change-Id: I043ecb131c8dcd07b6ef10bc75c9e010ab569e85
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Size policies can be compared for equality,
so qHash should be overloaded, too.
[ChangeLog][QtWidgets][QSizePolicy] Added qHash(QSizePolicy).
Change-Id: Id219f47ac6cb236efdd73cad7b892c8efd034d5c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
- Implement init() and cleanup() to verify that
no top level widgets are leaked.
- Position widget in tst_QToolTip::task183679() and set
window title.
- Remove hardcoded wait in tst_QToolTip::whatsThis()
and use a find function within QTRY_VERIFY().
- Rearrange and clean code a bit.
Change-Id: I0b1ad88444fc9441c1071a2527f75de1f68ea9e5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Two (?) tests can fail: what they actually try to test is that our application
quits on the second single shot timer (2 s. timeout) and not on the first one
(timeout 1 s.) - on the first timeout we either ignore event, or we still have another
window and should not quit yet, on the second timeout we actually do quit the app.
The test checks this in a quite fragile way, counting the number of timeouts for the third 100 ms
timer. It looks like on OS X (VM-only) there is some delay (~500-600 ms) before we receive the
first timeout so the count is always 14 or less, making the test to fail.
Change-Id: I9e8728e6c956025d91528f4195982767a5d3d320
Task-number: QTBUG-46164
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: Iffc9043654a9dcd97d55e262011c8daff6f4e60f
Task-number: QTBUG-25300
Task-number: QTBUG-45502
Task-number: QTBUG-46325
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
