When font embedding is explicitly disabled, fall back to painter paths
as we would if the font prohibits embedding. Note that this flag was
never respected on any platform in any version of Qt, as far as I've
been able to tell, because the handling of it in the X11 print
engine was removed shortly after it was introduced in 2005.
[ChangeLog][Printing] Disabling font embedding is now possible using
the QPrinter::setFontEmbedding() function.
Task-number: QTBUG-41943
Change-Id: Ice5e893f9893c5243310ae7892bec7497dd55c4a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add support to get/set the DuplexMode on Windows and Mac, improve the
CUPS duplex handling, ensure support is the same on all platforms.
[ChangeLog][QtPrintSupport][QPrinter] Added duplex support for Windows
and OS X.
Task-number: QTBUG-11332
Change-Id: I9d61d63233d828c3b1fd6df54072c6049f3c6298
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The page size test can get confused when two printer papers have the
same size, but the code being tested is actaully correct. Put a temp
QEXPECT_FAIL on the test and some debug statements so we can see why it
fails and fix the test as required.
Change-Id: I160ba2ed7344500d89bdcb9bb416863713fef84b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Using QPageSize internally provides the Windows ID on all platforms so
remove the conditional compile on the QPrinter api and add support to
the print engines.
Change-Id: I31e23d5090a9b6ceb087c29dead050b0ee1855a5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Use QPageSize and QPageMargins to get/set values in the print engines,
add api to directly set the values, and rewrite the docs to make the
paper-based api obsolete instead of the page-based api.
Add new PPK keys to pass QPageSize, QPageMargins and QPageLayout to the
print engines to ensure no level of detail is lost, e.g. for custom
sizes passed to QPrinter.
[ChangeLog][QtPrintSupport][QPrinter] QPrinter can now use QPageSize
and QPageLayout in the public api to control the page layout for a
print job.
Change-Id: Iee39a4042bcd6141d29b0a82b49066d7a7a78120
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change the Windows QPrintEngine implementation to use the
QPlatformPrintDevice to obtain device information, and use QPageSize to
obtain page size conversions. A following change will use QPageLayout
to store that page size.
Change-Id: I990943e2b62ab6dab2c4d4a292c7ed7261beadf2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change the QPrinterInfo implementation to use QPlatformPrintDevice as
the backend. Remove all the old QPrinterInfo related code from the
QPA plugin. Add public api to QPrinterInfo to support some features
from QPlatformPrintDevice.
[ChangeLog][QtPrintSupport][QPrinterInfo] Added new public api for
isRemote(), state(), defaultPageSize(), supportedPageSizes(),
supportsCustomPageSizes(), minimumPhysicalPageSize(),
maximumPhysicalPageSize(), supportedResolutions(),
availablePrinterNames(), and defaultPrinterName(). The use of
availablePrinters() is discouraged due to performance concerns.
Task-number: QTBUG-35248
Change-Id: Ic38323a930549ad67bf04a1a6bb43d623dfe6a33
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add more page metrics tests to expose the many bugs and inconsistencies
in the page layout handling. No platform or pdf backend passes all
these tests so they are skipped for now, but following commits will use
the tests to ensure the re-write of the page layout handling fixes the
many problems in a consistent way for all backends.
Change-Id: Ic5b16aa08dfe2bd9a9191662fd2bbe6b913e15c9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Make the printer selection option api public on Windows to be
consistent with Mac, and with the print program api which is already
public.
Change-Id: I3da9684288348eaa43276ca8534a1d5809f7027b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add support to the Mac and Windows print engines to preserve the
creator name when switching between native and pdf format.
Change-Id: Ie036af3140f24d8e34aa886f091384f93aa0157b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Mac supports Collate Copies using native api, so add support. Note
this is mostly only useful for setting the print dialog default, as
Mac supports server-side multiple copies so the app will never need to
collate the copies itself.
Change PDF and Windows to default to collate true to match Mac as this
is the behavior users expect.
Task-number: QTBUG-27724
Task-number: QTBUG-35251
Task-number: QTBUG-22144
Change-Id: Ia43dbc260b3a71aa5b267cca54c168ffbea794fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add support to the Mac print engine for set/get the Document Name using
the Job Name setting. Our documentation states this is one use that the
document name will be put to so is appropriate to be used.
Change the Windows print engine to default to a blank Docuemnt Name
consistent with the other print engines. If still blank when printing
then use a default value.
Task-number: QTBUG-27724
Task-number: QTBUG-22144
Change-Id: If590811b5720e6f759eabc290b578b94e221f9f4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The PrintEngine keys are not consistently treated across the platforms
and are not properly tested. Start the process of making the print
engines behave consistently by documenting and testing the current
behavior. Ensure all unsupported features return a consistent
default value.
The auto test for valuePreservation() has been flaky depending on the
platform and installed printers so remove it and replace it with more
complete testing. If no native printers available then don't test
the native engines.
Fixes for the individual inconsistent keys will follow.
Task-number: QTBUG-26430
Change-Id: Iab914d7e0a5ae4a2cdc24c8645751f0910cf440c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Currently the QPrinter constructor, setOutputFormat() and
setPrinterName() make bad assumptions about the availability of printers
when configuring NativeFormat which can lead to inconsistent print
engine set-ups leading to crashes in the print dialog, especially on
Windows where a valid DEVMODE is needed.
This change cleans up the init and methods to ensure NativeFormat can
only ever be set if we have both a valid plugin and a valid printer,
if not the PdfFormat is used. One side-effect of this is that it is
now impossible to set an invalid printer name via QPrinter (but still
able to be done via QPrintEngine if really needed). Also if no
default printer is set then use the first available one.
This also fixes a bug where setting a new printer name on Windows
reset all the saved settings.
[ChangeLog][Important Behavior Changes] QPrinter no longer allows you
to set an invalid printer name.
Task-number: QTBUG-34345
Task-number: QTBUG-26008
Task-number: QTBUG-26430
Change-Id: I19737e4209d8c8df5817ea83246b3dd0c483ee85
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
When EnumForms was used then the dmPaperSize was not always correct for
the custom paper sizes available on some printers. By using
DeviceCapabilities we can be sure that the information is correct in this
respect.
This also fixes respecting of the custom paper size if one is given and
there is no corresponding existing paper size for it.
Task-number: QTBUG-34276
Change-Id: I9924d5be8527027fc434261e37f6c7aae66210c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This simplifies the code a bit and ensures that it is respecting what
the relevant function expects the size to be as.
Change-Id: Iec88fab84c27a33d6f1a9e9413ea6beb0a39c68d
Reviewed-by: John Layt <jlayt@kde.org>
Use the correct metrics for the requested PageSize instead of always
defaulting to A4.
Task-number: QTBUG-30494
Change-Id: Ia3978afe3f7cc9b1ded1065416e5c3def44e7a05
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifd116dee32a450ff89a9a1011e26b434765d6e95
Reviewed-by: David Faure <david.faure@kdab.com>
When the QPrinter is initalized then it will set up page margins based
on the default paper size. If the paper size is changed to be a custom
one then it should disregard the margins for the default paper size.
If the page margins are set explicitly beforehand then it will use these
page margins.
Change-Id: Ic535c3a80b8b217dbd5eb5f4fb2cbc0ab1354563
Reviewed-by: Titta Heikkala <titta.heikkala@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reverting change: Ia6bc9ae14d79a646e61bfc97652f9f5af90738b3
The previous change does not set the printer correctly. It looks
based on the tests that the correct printer is set, but in reality
the default printer is used (even though printerName() is returning
the printer set).
Updated taskQTBUG4497_reusePrinterOnDifferentFiles() test case
so that it generates PDF instead of PS. Testing the binary output
can't be guaranteed to work in this case.
Change-Id: Iee111f2c2dec84f86344a38816c21e191f5373ea
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
CUPS paper sizes may differ from Qt paper sizes slightly and thus fail
the strict comparison in qprinter tests. This is needed for the
followup patch which initializes the cupsplugin with CUPS/PPD defaults.
Change-Id: Ie66f77ead0204de0fc7c7913005fa516d57d34eb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Redoing 5704cbc462
This can't work, because the define comes from qconfig.h, not qmake.
Skipping initTestCase and cleanupTestCase when QT_NO_PRINTER is
defined.
Change-Id: I2527c018294b7518a4692f2c93da933848640b5d
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Exclude printsupport tests from the build when QT_NO_PRINTER is
defined.
Change-Id: Iedae91666a599f4b77250abc8aac14c256fde34e
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
The CreationDate entry in the two PDF files can potentially
be different depending on when the test is run. We ignore the
line for this entry when comparing the two results.
Task-number: QTBUG-27171
Change-Id: I8978678295217edd537edb0d2c25260813aa3d93
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
The simplePen property was not reset when reusing the QPrinter,
thus we would output two identical setPen() commands in the PDF
making the autotest that compares the results fail.
Task-number: QTBUG-27171
Change-Id: I601042ec59e45ef72a56f230f6112a91a259b4a5
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
After setting the printer name the initialization is no longer done for
a printer with a name. Instead doReinit() method is called to preserve
the orientation (set with setOrientation() method before calling
setPrinterName()). Before the orientation was changed back to default
when setPrinterName() method was called ignoring the orientation set.
Updated also the autotest because the case:
taskQTBUG4497_reusePrinterOnDifferentFiles() is no longer expected to
fail on Windows.
Task-number: QTBUG-26008
Change-Id: Ia6bc9ae14d79a646e61bfc97652f9f5af90738b3
Reviewed-by: Andy Shaw
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Fixed Q_WS_WIN flagging to Q_OS_WIN in QPrinter API and related
implementation to make API match the documentation and Qt 4.8.
Also Removed the unused internal HDC related functions from the API,
that were previously behind Q_WS_WIN flag.
Some of the properties tested are documented to be valid for native
print engine only in X11 environment, so skipped testing those in
non-xcb environments.
Copy collation is also apparently not supported in Windows native print
engine, though this seems to be undocumented, so skipped that only in
Windows.
At least one of the test blocks in tst_QPrinter::valuePreservation()
failed due to default printer not getting set properly, so fixed that,
too.
Task-number: QTBUG-24191
Task-number: QTBUG-22927
Change-Id: I44a5e3d647a1279fcc7f1e99de6881f9be330246
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
