Make QPair an alias for std::pair, and qMakePair just a forwarder
towards std::make_pair.
Why? Fundamentally to ditch a bunch of NIH code; gain for free
structured bindings, std::tuple and std::reference_wrapper
compatibility, and so on.
Breakages:
* Some that code manually forward declares QPair.
We don't care about it (<QContainerFwd> is the proper way).
* Some code that overloads on std::pair and QPair. Luckily
it's mostly centralized: debug, metatypes, testing macros.
Just remove the QPair overload.
* Usages of qMakePair forcing the template type parameters.
There are a handful of these in qtbase, but only one was actually
broken.
* std::pair is NOT (and will never likely be) trivially copiable.
This is agreed to be a mistake done by practically all implementations
in C++11, can can't be fixed without breaking ABI.
Some code using QPair assuming it's trivially copiable may break;
exactly one occurrence was in qtbase.
* QMetaType logic extracts the type names in two different ways,
one by looking at the source code string (e.g. extracted by moc)
and one via some ad-hoc reflection in C++. We need to make
"QPair" (as spelled in the source code) be the same as "std::pair"
(gathered via reflection, which will see through the alias)
when compared. The way it's already done e.g. for QList is
by actually replacing the moc-extracted name with the name
of the actual type used in C++; do the same here.
On libc++, std::pair is actually in an inline namespace --
i.e. std::__1::pair; the reflection will extract and store
"std::__1::pair" so we need an ad-hoc fix to QMetaType.
[ChangeLog][QtCore][QPair] QPair is now an alias to std::pair,
and does not exist as a class in Qt any more. This may break
code such as functions overloaded for both QPair and std::pair.
Usually, the overload taking a QPair can be safely discarded,
leaving only the one taking a std::pair. QPair API has not changed,
and qMakePair is still available for compatibility (although
new code is encouraged to use std::pair and std::make_pair
directly instead).
Change-Id: I7725c751bf23946cde577b1406e86a336c0a3dcf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We use the Catch2 testing framework to test Qt Testlib, which also opens
up the possibility of using it for other internal testing once it's made
available through the build system.
The test now has a --rebase mode which will write out the actual results
as new expected files. Once we add the required post-processing to the
results to remove timestamps and other testrun-specific data we can
remove the standalone python script generate_expected_output.py that
today has to be kept in sync with the test itself.
No attempt has been made to clean up the comparison-functions, but
these could all benefit from moving their logic from the comparison
to the sanitization step. This will both make the expected files
more generic, and will reduce the diff once a failure occurs, since
we're not seeing all the hunks that the comparison-functions ignored.
Change-Id: I1769d42e7958d56d1ad5da958db0e8fe3a2a3c23
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The message to ignore is given in source code, hence UTF-8; it was
being ingested as local 8-bit, which lead to problems when a debug
message wasn't 7-bit clean and the system's native encoding wasn't
UTF-8. Modified QtTest's selftest to check encoding failure.
Pick-to: 5.15
Change-Id: I898744a450115b6d2ee992f1d3b36d8efaeeff7e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As discussed in the mailing list and in the Qt Contributor Summit 2019.
Tested on Linux, macOS and FreeBSD, showing these fallbacks:
OS environment setlocale() call
FreeBSD empty "C.UTF-8"
FreeBSD LC_ALL=C "C.UTF-8"
Linux empty "C.UTF-8"
Linux LC_ALL=C "C.UTF-8"
Linux LANG=en_US "en_US.UTF-8"
Linux LANG=de_DE@euro "de_DE.UTF-8"
Linux LANG=en_GB.iso885915 "en_GB.UTF-8"
Linux LANG=hy_AM.armscii8 "hy_AM.UTF-8"
Linux LANG=ja_JP.sjis "ja_JP.UTF-8"
Linux LANG=ru_RU.koi8r "ru_RU.UTF-8"
macOS empty "UTF-8"
macOS LC_ALL=C "UTF-8"
Versions tested: FreeBSD 12.1, Linux w/ glibc 2.30, macOS 10.14.2.
See
* https://wiki.qt.io/Qt_Contributor_Summit_2019_-_QtCore
* https://lists.qt-project.org/pipermail/development/2019-October/037791.html
Change-Id: Ia2aa807ffa8a4c798425fffd15d97ddb4f35b0ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We hope this shall avoid some flaky failures noticed in quick tests,
e.g. tst_QQuickMenu::Material::subMenuPosition(cascading,flip) was
recently seen failing with 3.88e-11 != 0. This required some revision
to test data in the testlib selftest for floats; the resulting
expected output differs in details but not in which tests pass or
fail. QEMU, naturally, made life difficult, requiring special-case
code in the test-driver.
[ChangeLog][QtTestLib][QCOMPARE] QCOMPARE() now treats its values as
equal when qFuzzyIsNull() is true for both of them.
Change-Id: Icc6ad5164b609937eddbe39cc69120f0abf0f3b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The use of a single subdirectory only for the test binary, but not the
actual source file, just made things harder to discover when looking
for the test code. Now all subdirectories are actual sub-tests.
Change-Id: Ia3e308ba8d231cc8ead1491b10a34801f76669b0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch adds the equivalent of testlib's selfcover.pri and is enabled
for both testlib and the respective selftests test.
This patch also fixes the selftests so that they can run without
FEATURE_testlib_selfcover enabled.
Change-Id: I15913de2d572ac79804ce3e652cee66de74318f8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This also fix the normalization algorithm:
- Some 'const' after pointers were not removed as they should.
- No need to keep the space in '> >' and '< :' in C++11 anymore
- Fix normalization of 'long unsigned int' and similar
Change-Id: I2b72f0fede96c1063e7b155d9f25a85fccfc7bf9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
The test orchestrator shouldn't have to deal with the individual options
needed for each test.
Change-Id: I78bbf4850cc649e625bd08a7aedf02267ba1314d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I2fd7a39684bde44d82c4d877086f606413d68520
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
These tests are apparently not run at the moment, otherwise they would
have failed to even start, but they should definitely not have the tst
prefix.
Change-Id: Iafcec2764ebb3570e6bc6ebfba27d92a94639893
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If we had one test function that just did
tst_Mouse::f1()
{
QTest::mouseMove(w, QPoint(0,0));
}
and another test function that did
tst_Mouse::f2()
{
QTest::mouseMove(w, QPoint(500,500));
}
their corresponding event timestamps were only 1 apart from each other.
This meant that any code that tried to estimate the velocity of a mouse
cursor would get a really high velocity estimate inside f2(). This would
come as a surprise to most people. So to avoid this, we add a 500 ms
timestamp delay between each test function call.
In theory this could also prevent generating a mouseDoubleClickEvent
when a pair of test functions containing a press-release sequence was
run, but there is a separate pre-existing mechanism to handle that case.
Change-Id: Icd4fc35853c09f080466d22411208c7b5c4174b5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The reporter was probably named 'xunit' based on the historical use of
xUnit to refer to testing frameworks derived from Smalltalk's SUnit.
These frameworks typically added their own prefix, e.g. JUnit for Java,
RUnit for R, etc.
The most popular of these was the JUnit framework, and the corresponding
XML output produced by the Ant built tool became somewhat of a de facto
standard, which is probably why we chose to model our reporter after it.
Nowadays however, naming it 'xunit' is problematic as there is actually
a testing famework named xUnit.net, typically shortened to, you guessed
it: xunit.
Test report consumers will typically have a junit mode, and an xunit
mode, and the latter could easily be mistaken for what testlib outputs,
unless we clarify this.
The clarification also allows us to safely extend our support for the
JUnit XML format to incorporate some elements that are nowadays common,
but where we are lagging behind the standard.
[ChangeLog][QTestLib] The formerly named 'xunitxml' test reporter has
been renamed to what it actually is: a JUnit test reporter, and is now
triggered by passing -o junitxml to the test binary.
Change-Id: Ieb20d3d2b5905c74e55b98174948cc70870c0ef9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is almost 100% source compatible with Qt 5. Exceptions are
* Stability of references for large or non movable types
* taking a PMF for types that are now overloaded with r-value references
in QVector
* The missing prepend optimization in QVector (that is still planned
to come for Qt 6)
Change-Id: I96d44553304dd623def9c70d6fea8fa2fb0373b0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Testlib's signaldumper functionality would crash inside
testlib as it dereferenced the sender after it was deleted.
Change-Id: I6013b75b0a121e2768429d8a3cf0339a940314f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test is not failing anymore on QEMU targets.
This partially reverts commit
71bd06d516.
Fixes: QTBUG-71915
Change-Id: I68593edf0ec245e14879833c8aa90661a3c2e227
Reviewed-by: Liang Qi <liang.qi@qt.io>
When running Qt autotests on a developer machine with a high
resolution, failures occur due to either some widget becoming too
small, some rounding fuzz appearing when Qt High DPI scaling is active,
or some test taking screenshots failing to deal with device pixel
ratios != 1 in the obtained pixmaps.
It is not feasible to adapt all tests to pass on high resolution
monitors in both modes (Qt High DPI scaling enabled/disabled). It
should be possible to specify the High DPI setting per test.
Previously, it was not possible to set the Qt High DPI scaling
attributes since they must be applied before QApplication
instantiation.
Enable this by checking for the presence of a static void initMain()
function on the test object and invoking it before QApplication
instantiation.
Prototypically use it in tst_qtimer and to turn off High DPI scaling for
tst_QGL.
[ChangeLog][QtTestLib] It is now possible to perform static
initialization before QApplication instantiation by implementing a
initMain() function in the test class.
Change-Id: Idec0134b189710a14c41a451fa8445bc0c5b1cf3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This functionality is especially convenient if meta-object system is
heavily used in a test. For example, if you need to test a bunch of
signals based on their names and/or argument types.
Change-Id: I09a4ecbbd3d0859b5fd466d9dde7679804eb7614
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This show cases the new cleaner subdirs handling code in
pro2cmake.
Change-Id: I25001942ef020e4c4191b355f55309c4fb033ecc
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When accidentally running a test doing screen-grabbing
with High DPI scaling active, sizes of the obtained pixmaps
can differ due to the device pixel ratio. Add a check to make that
clearer.
[ChangeLog][QtTestLib] Comparison of QImage, QPixmap now checks for the
device pixel ratio.
Change-Id: Id8d5187e99c565c44a7bfb8b9cfb09737815fb15
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Only re-enable exceptions for the modules that do
CONFIG+=exceptions
in qmake
Change-Id: I9f19078adbdc1b8fa3d4102fb51a099e7e35522e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This will help with future regeneration.
Amends 6d1c695b0e
Change-Id: I2454dc36cfc00f7aad72488fb7927d7807978fd8
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Actually build tst_selftest
Fix the subdirs of it not to be actually built as tests (so that ctest
doesn't pick them up and tries to run them)
Change-Id: Id9d069f44241027dbd103884d36551163382b216
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I23bc9693fb9f553fd63d10687d51322394717ed7
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
If the deadline is far in the future, the conversions to nanoseconds
or internal arithmetic may overflow and give an invalid object, thus
the deadline may end up in the past. Added a test to the testlib
selftest for sleep.
[ChangeLog][QtCore][QDeadlineTimer] Fixed integer overflows
leading to immediate timeouts.
Task-number: QTBUG-69750
Change-Id: I9814eccdf9f9b3add9ca66ec3e27e10cd5ad54a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
