In tst_QDateTime::springForward(), we test correct handling of times
in the gap; these are formally invalid and a mktime() implementation
may reasonably reject them causing our date-time code to produce an
invalid result. So handle that case gracefully in the tests, only
insisting on consistency between the two ways of preparing the date.
In one test, package the repeated code I was going to adapt into a
macro to save repeitition.
Task-number: QTBUG-68832
Task-number: QTBUG-68839
Change-Id: Ib8a16ff007f4e75ab2ccff05b1ccf00a45e50dc8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Android doesn't use the proper zone-abbreviation, so just check it
starts with the right date-time. Revised the way the #if-ery for that
is handled, to avoid repetition of the (now more complex) condition in
the two tests affected.
Task-number: QTBUG-68833
Change-Id: Iceb5469f46c69ba5cdbaf7ca050ad70f2bb74f44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Have a test expect what it does produce rather than fail what we can't
fix.
Task-number: QTBUG-68837
Change-Id: Icda7bd9968682daf97d46d597f8bb0433560cde2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They used different messages for the same excuse, which weren't well
worded in any case; and their #if-ery was differently decorated.
Change-Id: I28f5032693aff1036cb086ac4032c669110a5cb5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It appears that in the 5 years since we deprecated this function, people
have not stopped using it. The removal of qt5_use_modules() caused lots of
troubles in packages still using it when they were compiled against Qt 5.11.0.
Instead, let's revive this function and keep it for the Qt5 life time.
See discussion on qt-development mailing list:
http://lists.qt-project.org/pipermail/development/2018-June/032837.html
Change-Id: Ic263e3bb6706268cb9ea38a0711665f166a3aa9e
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QString::sprintf(), like the C printf-family, always includes two
digits in any exponent it outputs. Up to 5.6, number() and arg()
taking a double did the same; but changes at 5.7 to enable opting out
of the leading zero this implies for a single-digit exponent
accidentally opted out of it in args() and number(). This commit
fixes number() and arg() to include QLocaleData::ZeroPadExponent in
the flags they pass down to the C locale's doubleToString(), restoring
the prior behavior, including consistency with sprintf().
[ChangeLog][QtCore][QString] Formatting of doubles with single-digit
exponent, by number() or args(), now includes a leading zero in that
exponent, consistently with sprintf(), as it did up to 5.6.
Task-number: QTBUG-63620
Change-Id: I10c491902b8556e9f19e605177ead8d9fd32abd9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
If there is a parent (typically an itemview) then StatusTip events
should be sent to that. However in the case of there not being a parent
then the event should be sent to the QHeaderView itself.
Task-number: QTBUG-68458
Change-Id: I2a8c11c973210c7adf1bf29443f224f968a357a9
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
If the fbo had samples > 0 set, it would use a temporary fbo with
a default configuration losing the HDR precision.
Change-Id: I7e9966165b3100f148c4ad24738f3ee71273f29a
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The implementation of QTransform::transposed() had a wrong assumption
about the type of the result.
Task-number: QTBUG-68630
Change-Id: Ia5ce794efe773d74fb5fdaff3da8cae2b452e7e5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
qFuzzyIsNull has a fixed range, where qFuzzyCompare can tell if numbers
are different in a more relative range. Without it QPointFs that are
heavily scaled will be interpreted as identical, when they are quite
different at their own scale.
Task-number: QTBUG-60359
Task-number: QTBUG-62161
Change-Id: Ic4ba90e9e994aedff5548d690f053eb309b0a60b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We move QInternalMimeData to a separate file, because this class is
used, even if draganddrop is disabled. From now on, include
qinternalmimedata_p.h instead of qdnd_p.h for QInternalMimeData.
Change-Id: I594e08e2e90d574dc445119091686b4b69e4731b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
It happens because our filesystemwatcher thinks it is subdirectory and not
two different paths
Task-number: QTBUG-60676
Change-Id: Ic753e9481cb26303a030044e0a5ab4d703bc529f
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
When a new model was set with setSourceModel() and the mapping was
built up, the destruction of the old model caused a reset in the
QSortFilterProxyModel which lead to an empty view or an assertion.
Now we properly disconnect the old model again and also clean up the old
mapping/persistent indexes when a new source model is set.
Task-number: QTBUG-44962
Task-number: QTBUG-67948
Task-number: QTBUG-68427
Change-Id: I2e0612899c210bde3ac0cfa59aefd78269deee5b
Reviewed-by: David Faure <david.faure@kdab.com>
Wait for the spinbox to show become active in the previous test. Also use
QWidget::activateWindow() instead of QApplication::setActiveWindow(). Use of the
latter seemed to result in some confusion where QWidget::isActiveWindow()
returned true but QWindow::isActive() on the underlying window returned false,
leading qWaitForWindowActive() to fail.
Also remove superfluous setting of focus. It was just set and verified.
Change-Id: I023cdc2d272e23b2537b32606b7a3bf35bf671ac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][QtCore][QSharedPointer] Fixed a problem that made create()
on a type with const qualification fail to compile.
Task-number: QTBUG-68300
Change-Id: I0825ff5b5f6f4c85939ffffd152f3e55e5b9caae
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This accounts for a case of a placeholder being duplicated in the
prepare query, but where only one placeholder was used. This amends
e4e87a2ece
Task-number: QTBUG-68299
Change-Id: Ia92ee912facd51a13e7222886debb219b24442b0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
setAutoRepeat() is failing on macOS and Windows when run together with
defaultAndAutoDefault(). It succeeds when run on its own. Adding the wait allows
it to succeed when run with the other tests as well.
Amends 0cb940b1d3, which removed the wait.
The comment is the same as before. I couldn't see a better way to replace the
wait (QApplication::topLevelWidgets() already returns only the testWidget and
testWidget->isActiveWindow() returns true).
Another theory I had was something waiting for the KeyRelease so I changed
QApplication::sendEvent() uses to QTest::keyClick(). It did not help but that
still seems preferable.
Change-Id: If87d1e6e018751f3068ea4c913ae6731aba41ff0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
tst_QProcess hangs sometimes in QEMU. Based on my experiments in a debug VM the
offending test seems to be processesInMultipleThreads(), since that was were I
was able to reproduce the hanging in.
Since the whole test executable hangs, blacklisting is not enough, so skip the
test.
Task-number: QTBUG-67760
Change-Id: I34f8852be955a8612deac22b369f68d79a139d11
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The added test case contains the binary JSON equivalent of
["ž"]
with the modification that the string's length has been set to INT_MAX. In
Value::usedStorage this length is used through the pointer d like so
s = sizeof(int) + sizeof(ushort) * qFromLittleEndian(*(int *)d);
Because 2 * INT_MAX is UINT_MAX-1, the expression as a whole evaluates to 2,
which is considered a valid storage size. However, when converting this binary
JSON into ordinary JSON we will attempt to construct a QString of length
INT_MAX.
Fixed by using String::isValid instead of Value::usedStorage. This method
already takes care to avoid the overflow problem. Additionally, I've tried in
this patch to clarify the behavior of Value::isValid a bit by writing it in a
style that is hopefully more amenable to structural induction.
Finally, the test case added in my previous patch had the wrong file extension
and is renamed in this one.
Task-number: QTBUG-61969
Change-Id: I45d891f2467a71d8d105822ef7eb1a73c3efa67a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously the test worked because the client was the last party to know
when encryption was established. However, due to changes in the TLSv1.3
handshake the server is now the last one.
In either case, relying on both to be encrypted when one of them is
finished is not great, so now we only quit the event loop when both
client and server have emitted 'encrypted'.
Change-Id: Ic1fc75671206d866f7ea983805fd58a99657aac6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Replace with QSignalSpy or QTRY_COMPARE when possible.
Task-number: QTBUG-63992
Change-Id: I18dc8837301424855487a12ee62451a5aeb21bf0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test relies on the existence of qt-project.org in resources. It
contains mimetype data and is automatically added. For static builds on
MSVC it is only added if it is actually needed though.
Change-Id: Icd1d74466607196f9b635205f7cb4d9b300ec4b8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If builtin_testdata is present additional data ends in inside of
resources so that tests can access this data when needed. The addiitonal
data has to be taken into account in the resource engine's test.
Change-Id: I10de6b9612ca49b314d77cfadd5b2360a5d90d53
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: I399cc1aed3ee4151cf6adfd8f8780d8975604d52
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
The formatting of the output from QSslCertificate::toText has
changed slightly from before, so it no longer matches the test's
data.
From what I can tell we just do a manual sanity check and create
a new file with the new output and then augment the test.
Task-number: QTBUG-67463
Change-Id: I751e5a3f9a28015f97c895cea47384704fd68e38
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The added test case is the binary JSON equivalent of
{"a":{"š":null}}
with two modifications. First, the length of the string "š" has been corrupted
to 0xFFFFFF00. Second and more import, the Base::size field of the inner object
has been reset to 0.
On its own the first modification would normally trigger a validation error.
However, due to the second modification the Value::usedStorage for the inner
object evaluates to 0, completely disabling all further validation of the
object's contents.
Attempting to convert this binary JSON into standard JSON will lead to the JSON
writer trying to construct a QString of length 0xFFFFFF00.
Fixed by validating also objects with usedStorage == 0.
Task-number: QTBUG-61969
Change-Id: I5e59383674dec9be89361759572c0d91d4e16e01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The added test case is a binary JSON file describing an array which contains
itself. This file passes validation even though attempting to convert it to
plain JSON leads to an infinite loop. Fixed by rejecting it in validation.
Task-number: QTBUG-61969
Change-Id: Ib4472e9777d09840c30c384b24294e4744b02045
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This method takes a pointer+size pair, but begins reading through the pointer
without first checking the size parameter. Fixed by checking the size parameter.
A new test case is added with an empty binary json file. Although the test does
not fail under normal conditions, the problem can be detected using valgrind or
AddressSanitizer.
Task-number: QTBUG-61969
Change-Id: Ie91cc9a56dbc3c676472c614d4e633d7721b8481
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the page size was not valid on the new printer, it would end up
having the wrong page size name on the new printer. What should happen
in this case is that it should set the originally set page size as a
custom page size on the printer instead.
Task-number: QTBUG-62221
Change-Id: Iaca34ae262f5d0685ca60e4ca4b38229a2283289
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
The reason it crashed was this:
1. Button was pressed => _panTimer started with the graphics view as
destination.
2. Button was released => the graphicsview is destroyed
3. 300 ms later: Qt tries to deliver TimerEvent from _panTimer to the
graphics view. Unfortunately, the graphics view is deleted, but Qt
doesn't know that... (*crash*)
We therefore chose to start the timer with a destination we are controlling the
lifetime of: the QMacPanGestureRecognizer. Inside the timerEvent of that we can
check if the actual target is already destroyed.
Task-number: QTBUG-60404
Change-Id: Iff8f5b7217de42c4c5cf551ca507f0cff1c99a78
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
paintEventCount() is currently flaky on macOS. It gets extra paint events after
qWaitForWindowExposed() returns, which causes the following assertions to fail.
Add the wait that was removed in 0cb940b1d3 back
to fix those failures.
Task-number: QTBUG-68032
Change-Id: I68e0b6008de40922ec740291dfdd1842e0f62f89
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Replace the code for isRowSelected and isColumnSelected with
a much simpler algorithm for deciding if a row/column is selected.
In a model with a cross-hatch of unselectable indexes, the return values
of is(Column/Row)Selected would depend on the order in which the
selections were done.
Task-number: QTBUG-18001
Change-Id: I6aa4b1df7c07fae469a686041927fa8c42bc9b16
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Home/End don't actually work on macOS. The "select all and delete" key
was not actually testing anything at all.
Change-Id: I44d3e9dd27da418afd699bf8720d5369325d20df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
... but only if the host it came from is an EXACT match. Also only apply
the cookie if the url is an EXACT match.
[ChangeLog][QtNetwork][QNetworkCookieJar] Cookies will no longer be
rejected when the domain matches a TLD. However (to avoid problems
with TLDs), such cookies are only accepted, or sent, when the host name
matches exactly.
Task-number: QTBUG-52040
Change-Id: Ic2ebd9211c48891beb669032591234b57713c31d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
checkReason_ActiveWindow() started failing on Windows when run together with
other tests, but still passed on its own.
The offending tests was checkReason_focusWidget(), which showed a window but did
not wait for it to be active.
After adding this wait the whole test executable passes on Windows as well.
Amends fd87c8da82.
Change-Id: I384bc45176fcd7bf6f491a4f39b46464ba45693b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This way the platform window is destroyed in a timely manner, preventing
redundant close events from the window system.
Task-number: QTBUG-43344
Change-Id: Ifdfca59ceacef54405f1c227c493dc514a1b27ea
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Instead of a local wrapper for it.
Change-Id: I0708dfad44b3db0c7a13e75ba5b4193ab50ac315
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
The NEON implementation uses rsqrt and thus can not be taken on 0, so
replace the minimum with something close to zero instead of zero.
Task-number: QTBUG-59961
Change-Id: Ia39e45be675b056c1e22900495ce9ba4e8b70e5f
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
This was originally added so that you could replace a T with
QAtomicInteger<T> in the same class and still keep ABI. However, for
legacy reasons, on 32-bit x86, types larger than 4 bytes keep an old
1990s alignment of only 4 bytes, but modern std::atomic<T> for those 8-
byte types enforces an alignment of 8 bytes. Therefore, the requirement
to keep alignment is not possible to guarantee.
In other words: you may not replace T with QAtomicInteger<T> or
std::atomic<T> and assume no ABI breakages in all platforms.
This is a requirement to implement atomicity. An 8-byte type aligned to
only a 4-byte boundary could cross a 16-byte boundary or, worse, cross a
cacheline boundary. Crossing the 16-byte boundary could be bad on some
processors, but crossing the cacheline boundary (addresses ending in
0x3C, 0x7C, 0xCC and 0xFC, or 4 out of 64 possible addresses or 6.25%)
is always bad: the CPUs cannot guarantee an atomic load or store
operation.
See also <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71660>.
Task-number: QTBUG-67858
Change-Id: If90a92b041d3442fa0a4fffd15283e4615474582
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
That check is flaky on Windows. It doesn't seem to be testing Qt functionality.
I also don't see CreateFile2() documentation mentioning any guarantees that
opening the same file twice would give the same HANDLE each time.
Change-Id: Ica2e60571ae9fc39bf822803a2a9dd6add8323d7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When a key press is received which is not spontaneous then it needs to
be manually sent as a shortcut override event to ensure that any
matching shortcut is triggered first. This enables emulation/playback
of recorded events to still have the same effect.
[ChangeLog][QtWidgets] Sending a key press event with sendEvent() now
sends a ShortCutOverride event first to the widget to trigger any
shortcuts set first.
Task-number: QTBUG-48325
Change-Id: Iafcc2cdb1773bffe89edaeb0abc44cd5a51088e6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The drive has to be defined for every Windows configuration (also
including winrt).
Change-Id: I94a3131b8aec20cda97dc78f55b1d87aa10240e4
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
This static method can be called before QGuiApplication is created. At
that point there is yet no primary screen, so the implementation
needs to guard against dereferencing a nullptr.
Task-number: QTBUG-67309
Change-Id: I6b7b9e97b1c3c79bf2f9c6d6247c3b10f39f7a55
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
To read data from a named pipe, QWindowsPipeReader uses the ReadFileEx()
function which runs asynchronously. When reading is completed and the
thread is in an alertable wait state, the notified() callback is called
by the system, reporting a completion status of that operation. Then the
callback queues a readyRead signal and starts a new sequence. The latter
is skipped if the pipe is broken or the read buffer is full.
Thus, if an application does not run the event loop, the next call to
QWindowsPipeReader::waitForReadyRead() should emit the queued signal
and report true to the caller even if no new read operation was started.
Change-Id: I37102dbb1c00191d93365bfc2e94e743d9f3962a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
1. If a request was redirected or some error was encountered, we
try to reset the uploading byte-device.
2. Disconnecting from the byte-device is not enough, since we have a
queued connection, _q_uploadDataReadyRead() gets called even if
byte-device was deleted and thus sender() can return null -
we have to check this condition.
3. Update auto-test with a case where our server immediately
replies with a redirect status code.
Task-number: QTBUG-67469
Task-number: QTBUG-66913
Change-Id: I9b364cf3dee1717940ddbe50cba37c3398cc9c95
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This failed (occasionally) in finding the editor widget, so wait for the window
to be shown properly. Also enter the event loop with QTRY_VERIFY and not for a
fixed time of 1 s.
This however just moved the point of failure. Now the test fails since the
clearing and setting of focus does not dismiss the editor widget sometimes, so
still blacklist it.
Task-number: QTBUG-67282
Task-number: QTBUG-66216
Change-Id: Iec598609fce23a25d7b955082d0973685d612715
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Use QTRY_COMPARE instead of a wait followed by QCOMPARE. Unless the condition
doesn't change and the wait provides the opportunity for things to go wrong.
Task-number: QTBUG-63992
Change-Id: I13474a45f1f4df9d77a418729a5748235ae0dd1a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
For the time being, no more stretched QComboBox. They
were already looking bad before and nobody complained,
so it's a non-issue. In the future, we might use square
combo boxes in the same way as we do for push buttons
but for non-editable QComboBox only.
Removes what is now dead code, including some leftovers.
tst_QMacStyle updated to reflect size changes to accom-
modate the focus ring.
Change-Id: I60fac86b9acb52cc96373bca0b3cad598ec4f1e7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Properly handle single protocol TLS configurations. Previously,
due to the use of generic (non version-specific) client/server method
they worked as ranges of protocols instead. This also fixes a couple
of previously broken tests.
Task-number: QTBUG-67584
Change-Id: Ied23113a4fab6b407a34c953e3bd33eab153bb67
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reduces the timeout from 10 seconds to the default 5, but the tested events
(resize events, painting) seem like something that should happen in 5 seconds.
Change-Id: I1d12372f37264bf7be64096e43813cd03f567102
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
BuiltIn inputs shouldnt be translated into a code input. We comment the
input line for this variables
Change-Id: I3b7d2fd06afc6a122d90a999fc5a5246fc93234e
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
The test was failing because the files it expected to create were not actually
visible on the disk.
This was because 189e9c93d7 made QTemporaryFile
use unnamed files if the file name is not actually requested. Fix by forcing the
temporary file to be made with the requested name.
CI has not caught this because the test executable is marked insignificant_test
on Linux.
Change-Id: Ibe0244fdfcc66acf3be4314da51b4c0b3b520b71
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Except RHEL-6.6 and 7.4
It was blacklisted in f3939d943e, along
with a lot of other entries. No specifics are known about why it was
blacklisted originally, but now it only fails on RHEL because they
use OpenSSL 1.0.1.
Change-Id: I6d1d1b7b7bf5386b2115b8780163550cf03bbad7
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
On Wayland, manipulating the clipboard requires an input event serial, which is
not possible to get unless the compositor sends us input events.
Change-Id: If5231a5db85f8d6ad988ea93f240cee0c3466f9f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This makes the tests pass on Wayland compositors that don't automatically give
focus to newly created windows. Such as a headless Weston, which is very useful
for testing.
Task-number: QTBUG-66846
Change-Id: I502504b333499c89be193a3ebc19d41264a13580
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Instead of an unconditional wait.
The QSKIP is necessary because the PDF format is non-native and the Windows
implementation of QPrintDialog doesn't work then.
The macOS implementation has the same warning, so add the check for that OS
as well.
The test has previously passed, since it hasn't seen not actually opening the
dialog as an issue.
Change-Id: Ib53e378b232580358f13e0c5206404412f9e6ee2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The TZ database has recently revised its ccount of when they skipped a
day to cross the international date line, from skipping Jan 1st 1995
to skipping December 31st 1994. So Move the before-days check to
December 30th; and correct the Feb 2nd that was meant to be Jan 2nd
(and does need to remain so, for compatibility with systems with out
of date data).
Task-number: QTBUG-67497
Change-Id: I5b9483c553205817f995f91793662a5a85e03192
Reviewed-by: Liang Qi <liang.qi@qt.io>
OCIBindByPos2 is only needed when using execBatch(), binding data that
is longer than USHRT_MAX works for exec() so this is left unchanged.
Change-Id: Ifdcf91939d184f225d24c13052ea0b81611ecf91
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no need to qWait() before a QTRY_VERIFY. qWait() will also
intermittently handle events while waiting, so calling it in a loop isn't
necessary.
Change-Id: Ica7fbf18c03e673213dd9b72f31f71937cdcb145
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Q_ASSERT(mimePrivate.fromCache) at qmimedatabase.cpp:218
which I added in commit 7a5644d648, was being triggered when calling comment()
for invalid mimetypes such as db.mimeTypeForName("").
Change-Id: I8037041a4b435d2a5ba24ec94b7858e38b2f0bf2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the db isn't valid, then that's the actual issue, not the fact that we're
getting the same invalid db (with the same driver QSqlNullDriver) in
multiple threads.
Change-Id: I95490818ed78e741c3823e115f139c2cff01b0b1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Also use data-driven test to reduce duplication.
Change-Id: I9516e52267cb3c7b239030fd73dbbf23ac8f52f7
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes an irreversible global change: tests that do it will mess
with other tests. So make sure they're all last. This required
splitting up one test; and revealed another that secretly depended on
being run with C as default locale.
Task-number: QTBUG-67276
Change-Id: Ic24ef48b2c9bd5c37c1f11260b437628019624ca
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Do not let a global qtlogging.ini interfere with an autotest.
This works around an issue on Ubuntu 17.10
Task-number: QTBUG-67385
Change-Id: I0d02835eb7a561b43fe0b98f4383c170c6d51303
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Uses the scripts and tests we already have for lancelot as a painting
benchmark.
Change-Id: Idf8a55e2261162e619f6dbb567dc19f8dc96da4e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Instead use QSignalSpy to wait directly for the expected events.
Change-Id: I319302ea7177fe690b5d885347c505454904518e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
It is suspected that the fault actually lies in CI infra.
Amends e3cf2a1ae9.
Task-number: QTBUG-66311
Change-Id: I967da283f0b94be1d0b99481d0cbd15ca7f98d45
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These two places were sort of manually implementing QTRY_VERIFY except that they
never time out.
Change-Id: I136e6c7400194327c0475c6acfc019825ccec1b5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Use QSignalSpy::wait or QTRY_VERIFY instead. This shaved off ~200 ms of the
running time of the test and is more reliable.
Some unconditional qWait()s still remain in this test. They are giving an
opportunity for the wrong thing to happen and thus are not waiting for any
specific condition to be fulfilled.
Task-number: QTBUG-63992
Change-Id: I25a4470fe8d6a5b8b5039b3ed77321d24faa1707
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use QTRY_VERIFY instead of hard-coded wait for the tooltip to appear.
Also use QTRY_VERIFY to verify that no top level widgets are left over
to account for tooltips and effect windows.
Change-Id: Ia9835fdc480c6abb034f6fc4ad3d6b32751ee536
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
sync-up with qt-creator; no effect on qmake.
comment on cherry-pick: this is actually a lot more than a cherry-pick,
because the dual VFS needs to deal with the file ids which were
concurrently introduced on the qmake side.
Change-Id: I2c1eb16c97526fa275a1c6a2eae9266d385859ac
(cherry picked from qtcreator/424639ecac9d2e404d2bfaff7f46b45ed98664b8)
(cherry picked from qtcreator/a8010b0fff47d903d4a1f80e3adb1a2ef41beb33)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
when the QFile object is already constructed, querying whether the file
exists is actually cheap, so do it right away instead of later on
demand. that makes the calling code a bit cleaner.
fwiw, that we need to explicitly query the file's existence at all is a
result of QFile's completely useless error "codes" (which merely say
which function failed, as if the caller would not know).
Change-Id: Ifec39d05b1713d8128046f679287e510f10e45dc
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
(cherry picked from qtcreator/5ba32e3484ead2e35cc7732dcd59a97e7459dbfd)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Has been flaky on those platforms in CI.
Task-number: QTBUG-67254
Task-number: QTBUG-66216
Change-Id: Ia1a718a23b1992fcc0e85bf49b714bc43acc4ce2
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
