this is for shadow builds during build time, where the respective files
are expected in the source dir.
Change-Id: I18dcfbdef99e1562a51dacac333642cae8105ebd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... and introduce -hostlibdir configure option for symmetry.
the libraries built for the host have no business in the target prefix.
in principle this code would even support dynamically linked host
libraries, but that's currently unused.
Task-number: QTBUG-30591
Change-Id: I8e600fa4911a020fb0e87fbf7ef2f35647c7c4d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Ivan Romanov <drizt@land.ru>
the vendor string was changed, so compat is broken anyway.
Change-Id: I07241843237ce28bd7a869bb4170c7e4c8d084df
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
User applications are those that users run directly, whether it be for
development or not. The executable binaries that the user does not
usually run but is still required for proper functioning are called
"program executables" in Autoconf and they are placed in libexec.
This commit adds support for "program executables" in Qt by adding the
-libexecdir option to the configures, the qmake variable
QT_INSTALL_LIBEXECS (note the plural, to match all other properties),
and QLibraryInfo::LibraryExecutables.
At the time of this commit, the only expected "program executable" is
the QtWebProcess, the WebKit2 helper process from QtWebKit.
Change-Id: I66c3a3e0cf7f9d93b5f88f55f18e957faff608fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This commits adds a -qmldir configuration option for the configures to
allow the user to change the default location (it defaults to
$archdatadir/qml).
It adds a QLibraryInfo::Qml2ImportsPath value for
QLibraryInfo::location, a qmake property of QT_INSTALL_QML and a qt.conf
configure location entry "Qml2Imports".
At the same time, it makes the qmake .prf files dealing with QML plugins
be the QML 2 version. Those files are new in Qt 5, so we have the option
to choose which version we want to use.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-October/007136.html
Change-Id: I8c1c53e8685a5934ed0a9a42ba5663297b81a677
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Architecture-depedent Qt data defaults now to something under
-archdatadir. Architecture-dependent data is everything that contains
machine code (e.g., plugins) as well as anything that hardcodes
build-specific data, like qconfig.pri and qmodule.pri. That is:
QML imports: $archdatadir/imports (includes plugins)
Qt plugins: $archdatadir/plugins (machine code)
Mkspecs: $archdatadir/mkspecs (build-specific)
Architecture-independent Qt data defaults now to something under
-datadir. This option existed in Qt 4, but did not differentiate between
arch-dependent and independent. Following Autoconf's lead, --datadir is
the *independent* data root.
translations: $datadir/translations (.qm files are arch-independent)
docs: $datadir/doc
By default, both new options are equal to the Qt install prefix.
(Strictly speaking, for complete Autoconf compatibility, we'd need a
--datarootdir=$prefix/share, --datadir=$datarootdir/qt5 and
--docdir=$datarootdir/doc/qt5, but that's just nitpicking and
unnecessary)
Change-Id: I39c886a6a2d2d2c0b11923c50974179e21f2af76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
instead of symlinking (on unix) or creating a forwarding spec (on
windows), just put the default specs into (the bootstrapped)
QLibraryInfo.
Change-Id: I595500ef7399f77cb8ec117c4303bc0a2ffe505f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
this is preparation for adapting to a new evaluator.
Change-Id: I6fc59f5525735754a00afa6629fbfe257e84db97
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's a dynamic property which is something between meaningless and
misleading when used outside a project file.
also, experience from creator shows that people would consistently
abuse it (not handling it as the list it is).
Change-Id: Id52cd40da5c38c0c74535d0701fdae53dfa39cad
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the rationale is mostly the same as in 568e714fdf, plus the additional
point that the qmake version didn't change for a decade.
fallback paths for version 2.01a properties are provided.
Change-Id: I3d3f16595eca9eca71c78fda9dbaf53da9f874a9
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
this makes the "sysrootable" properties more magic, with the raw
versions being omitted from the qmake -query output and automatically
falling back to the "cooked" variant if there is no sysroot set.
this makes the "normal" qmake -query less noisy. this will become even
more obvious when i add more "overloads" of the properties.
Change-Id: I08000986427264ec6238c8fe0a77f5cecdbf1201
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is a one-time operation which depends only on the invocation, so
this new home is much more appropriate.
Change-Id: I07c66d95a9ae01a664cec17564995311fb78ec9b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
make it table-driven and have it cache the immutable values from
QLibraryInfo.
Change-Id: I07ed89152aa964bc9edf4436ee7c42f99cc6bcd3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
this should make the evaluator quite a lot faster. the total win for
qtbase/src is only 6%, though.
i made some effort to avoid that output files get randomized. however, i
didn't bother to keep debug output sorted.
Change-Id: Id9cef4674c0153c11ebbb65cb63bf8c229eb56e3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Tests will install under $$[QT_INSTALL_TESTS].
TESTDATA may be used to install additional testdata required by the
test.
The default install rule may be disabled by
CONFIG+=no_testcase_installs.
Change-Id: I204de60c8e844775906ffd016ca50bffbb414142
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The distinction between 'examples' and 'demos' is completely blurred at
this point. We've decided, with the SDK people, to scrap the existing
terminology in favor of the word 'example' only -- distinguishing
between code snippets, walkthroughs, "demonstrations" can be done
via keywords or some other method.
Removing QT_INSTALL_DEMOS from all .pro files in Qt is still in
progress.
Change-Id: I86fc0e40d54baa54c5641fc6acbd8b67e4ad2789
Reviewed-on: http://codereview.qt.nokia.com/1034
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
