qt6_android_generate_deployment_settings is implicitly used by
qt6_add_executable in user projects. This test makes sure that the
function behaves as expected for user projects specificly, since in Qt
tests it behaves differently because of Qt-specific conditions inside.
Task-number: QTBUG-116037
Pick-to: 6.6
Change-Id: Iea10eca7a780ebaff0c05b91ebe47b821b9ec956
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Remove all "#undef QT_NO_FOREACH" white-listing from source files.
Previous commits have removed all remaining Q_FOREACH/foreach uses in
this sub-tree.
Also remove one source file from NO_PCH_SOURCES in CMakeLists.txt.
Task-number: QTBUG-115839
Change-Id: I02cf994eda720c028e613407342fbd6658fa62b1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The QHash "cache" isn't modified in the loop body (method is const), in
general cacheSize() shouldn't be susceptible to data races.
Task-number: QTBUG-115839
Change-Id: I122a03ddd5e648d16736c16fa9289eafc886979d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The toString() method's parameter is a const&, the loop body doesn't
change the container; and the container the parameter refers to isn't
changed during iteration.
Drive-by, remove braces from single-line if blocks.
Task-number: QTBUG-115839
Change-Id: I363e1ed37c0f75fa6a9f8eac3393a6c10d756c1b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Straightforward ports where the container could be made const.
Use C arrays instead of QList if the data is known at compile time.
Drive-by, where appropriate make the for-loop variable a const& (e.g.
QString) instead of copying it for no reason.
Task-number: QTBUG-115839
Change-Id: I273a386e414e5923e750072f0407226efcd4531e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In both cases, the container is a member of the unittest, initialized in
initTestCase(), then not changed after that. So use std::as_const.
Task-number: QTBUG-115839
Change-Id: I3b66127e10ac94137260d99f354de9f66a74bec7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The containers are created locally in the top level test functions, they
can't be made const due to the way they are filled, however the loop
body don't change them; even if the code in a loop would cause
re-entrance du due to signal emittance or events processing, those
containers aren't affected and aren't changed during iteration because
the top-level test functions themselves aren't re-entered, hence
use std::as_const.
Drive-by change: take QHostAddress by const& when it's used as a
for-loop variable (it has a QExplicitlySharedDataPointer d-pointer).
Task-number: QTBUG-115839
Change-Id: I443169e10d973aba2f62854aba200fc2dc2c80aa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The loops were iterating over a temporary, so use a local const auto
variable to hold it, and use ranged-for.
Drive-by, make the for-loop variable const& instead of copying it,
for any object that has a d-pointer (QNetworkAddressEntry, QHostAddress,
QNetworkInterface).
Task-number: QTBUG-115839
Change-Id: If96c0b2a6142fe2fa2ed45ed7e2435cc1f80e005
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The was introduced with the rewrite of QMetaObject::invokeMethod() in
commit 0f76e55bc4, because we have an
optimization for zero timers to avoid creating a temporary
QSingleShotTimer object. The old implementation did attempt to normalize
the target slot name, but did so because it looked metamethods up using
QMetaObject::indexOfMethod:
int idx = meta->indexOfMethod(sig.constData());
if (idx < 0) {
QByteArray norm =
QMetaObject::normalizedSignature(sig.constData());
idx = meta->indexOfMethod(norm.constData());
}
The new implementation does not use this method so it didn't need to
attempt to normalize.
I am fixing this only in QTimer and not in QMetaObject::invokeMethodImpl
(even though it is trivial to do so) because I don't believe spaces in a
pure string to invokeMethod were ever expected to work:
QMetaObject::invokeMethod(obj, "slotName ", Qt::QueuedConnection);
The Q_ARG and Q_RETURN_ARG (for code not recompiled) still does
normalization inside QMetaType::fromName().
Fixes: QTBUG-116060
Pick-to: 6.5 6.6
Change-Id: I964c2b1e6b834feb9710fffd177cac60c83ef413
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The recent change in QCocoaScreen (108d2e4486)
fixed the problem with no widget found at 'hot spot' (while we know
it's there, since we create it and wait for it to get expose event).
Pick-to: 6.6 6.5
Fixes: QTBUG-108402
Task-number: QTBUG-115945
Change-Id: Ibbf6867bb3381b8137d64cdbd15cc467d8fcf348
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Unix dispatcher is not used and - as such - redundant on WASM.
Change-Id: Ia8789ef783b06ce9cfba2ce9d67159db2355b594
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
If OpenSSL version is 3.1.1 or above - this version moved the protocol
under security level 0, but the default one is 1.
Pick-to: 6.6 6.5 6.2 5.15
Fixes: QTBUG-116166
Change-Id: Iaabb2cf33e2a9f280d6167233ee16080dee808b0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Static variables for a message handler were used only in developer
build, while they were declared unconditionally.
That has lead to compiler warnings about unused variables in a
non developer build.
=> declare them only in developer build
=> move assignment and static method in front of the method,
that uses them.
Pick-to: 6.6 6.5
Change-Id: Ie06f91f7857130f08fd484a6e7319ddfd16c546b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When appending to an empty string or byte array, we optimize and
copy the internal pointer. But if the other string/byte array was
created with fromRawData this might be temporary data on the stack/heap
and might be de-allocated or overwritten before the string/byte array
is used or is forced to make a deep-copy. This would lead to incorrect
data being used.
This is easy to overlook if you plan to append multiple strings
together, potentially supplied through an argument. Upon appending a
second string it would make a full copy, but there might not be a
guarantee for that. So, it's hard for users to avoid this pitfall!
Fixes: QTBUG-115752
Pick-to: 6.6 6.5 6.2
Change-Id: Ia9aa5f463121c2ce2e0e8eee8a6c8612b7297f2b
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
IndexedDB version of QSettings will now use solely the sync versions
of data access functions. Those will suspend with JSPI.
This makes IDB settings conform to the QSettings contract - and also
allows us to enable tests in tst_qsettings for the IDB version of
QSettings.
Also, do not treat the IndexedDB format as one defining read/write
functions in QSettings - those are the same as for ini format, as
IndexedDB settings backend uses a backing ini file.
Change-Id: Iee3471cc79c0cea87378923cf9baac58e56d1272
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Starting from OpenSSL v 3.1.1 DTLS 1.0 is only available, if the
security level is 0, which is not the case most of the time. So
we consider this version number to be a 'threshold' after which
we don't test v 1.0 anymore.
Pick-to: 6.5 6.6 6.2 5.15
Task-number: QTBUG-116166
Change-Id: I9763703f36ae742e1d3c7cb17872cf8d0d82ab85
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Observers should only be registered when _reading_ the property.
Otherwise we get binding loops.
Pick-to: 6.6 6.5
Change-Id: I974f6ea444fa7a5d333ed79eea6f34e3d757d169
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The loop was iterating over a temporary, so it couldn't have changed it.
Store the container in a local const variable and port to ranged-for.
Drive-by change: don't call ps->availablePrintDeviceIds() multiple
times.
Task-number: QTBUG-115839
Change-Id: If2cabec68040dc7096acf0b7ddeff72d7c8c7750
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
resolution(): a local const container, Q_FOREACH wasn't needed here to
begin with, port to ranged-for
The rest, the loops were iterating over temporaries, so just put them in
local const auto variables and use ranged-for.
Task-number: QTBUG-115839
Change-Id: Iebe6d164661d74df9fefb764c370cdc9a8e817ff
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
msgMimeTypeForFileNameFailed(): the method takes the container by const&
and I've made the container const at the call site, so now it's
iterating over a const container.
allMimeTypes(): iterating over a const container.
checkHasMimeType(): was iterating over a temporary, store it in a const
auto variable.
Task-number: QTBUG-115839
Change-Id: If10eb425d55484bc1857dfdeafa9d65b2beb765f
Reviewed-by: David Faure <david.faure@kdab.com>
proEval(), proParser(): the loop was iterating over a temporary so it
couldn't have changed it. Hold the container in a const auto variable
and use ranged-for.
formatValue(): iterating over a const QList& parameter, and the container
isn't changed at the call sites during iterating, so Q_FOREACH wasn't
needed to beging with. Use ranged-for instead.
Task-number: QTBUG-115839
Change-Id: Idabe0bbd84b5bcc86cef275f80497651353a4d9e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
systemEnvironment(): the loop was iterating over a temporary; hold the
temporary in a local const auto variable and use ranged-for.
runCommand(): the container is a const&, the loop doesn't change the
container and the containers the method is called on aren't changed
during iteration.
Task-number: QTBUG-115839
Change-Id: I6687e5ff64ff8c2fa26e34abf4044b98718e65d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
specifyMetaTagsFromCmdline(): the loop was iterating over a temporary so
it couldn't have modified it; hold it with a const auto variable and use
ranged-for.
relatedMetaObjectsNameConflict_data(): make the container const and port
to ranged-for.
Task-number: QTBUG-115839
Change-Id: I6a5afdf0e5a3dd47818da0025fbbeacd05335b39
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The loop was iterating over a temporary container, so it couldn't have
changed it. Use a const auto variable to hold the container and port to
ranged-for
Task-number: QTBUG-115839
Change-Id: I66e7cbdb811666ca352cdf064b1228caa346d876
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
badString(): const'ify the static QList, this is both faster as the
compiler doesn't need to check if it has been already initialized, and
it means we can use it directly in ranged-for as the method returns
const QList&.
Drive-by change: don't go the long way around to get a const char*:
qPrintable(QString("fail %1").arg(ba))
instead use:
QTest::addRow("fail %s", ba.constData())
(thanks to dfaure for pointing it out in review).
Task-number: QTBUG-115839
Change-Id: I6e8efa6df47ee94f1d71a63e22ab121647e6bf20
Reviewed-by: David Faure <david.faure@kdab.com>
The container is local to the function, but can't be made const due to
the way it's filled. The loop clearly doesn't modify the container so
use std::as_const and ranged-for.
Task-number: QTBUG-115839
Change-Id: Ia9f01dfaccfca3225fe0487aafd0a386605cf466
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These are member containers of nested (in the test function) structs.
It's clear the container isn't modified in the loop body, so use
ranged-for and std::as_const.
Remove "#undef QT_NO_FOREACH".
Task-number: QTBUG-115839
Change-Id: I0588bf4b6520b42d6d8678d702192fb894956b05
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is a local container that isn't modified in the loop, so use a
ranged-for loop with std::as_const.
Task-number: QTBUG-115839
Change-Id: Ie9129e065f8ae9bd8c93cf95093a77529aef0803
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Use std::initializer_list/std::array for data known at compile time.
In files where Q_FOREACH isn't used any more, remove
"#undef QT_NO_FOREACH".
Drive-by change: de-duplicate some trivial code.
Task-number: QTBUG-115839
Change-Id: Ifb1a93579bd4ab8fd10f78665a28559cc61da7e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These are local containers that are either:
- Already const and didn't need Q_FOREACH to begin with
- Can be simply made const, just by adding const keyword
In one case the unittest checked that the container's size is 1, so use
list.first() instead of a for-loop.
In files where Q_FOREACH isn't used any more, remove
"#undef QT_NO_FOREACH". Also remove those files from NO_PCH_SOURCES.
Drive-by changes:
- Remove parenthesis from one-line for-loops
- Make the for-loop variable a const& where a copy isn't needed
Task-number: QTBUG-115839
Change-Id: Ide34122b9cda798b80c4ca9d2d5af76024bc7a92
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The loop was iterating over a temporary container, so it couldn't have
changed it. Store the container in a const auto variable and use
ranged-for.
In files where Q_FOREACH isn't used any more, remove
"#undef QT_NO_FOREACH".
Task-number: QTBUG-115839
Change-Id: I402df5fa48f4287f3cc989ddae1524da43999049
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
cleanupTestCase: the loops don't change the member containers, so use
std::as_const and ranged for.
iterateRelativeDirectory(): the for loop doesn't change the container,
so make it const to begin with, and use a ranged-for loop.
Drive-by change: make the for-loop variables const&, no need to create
unnecessary copies.
Task-number: QTBUG-115839
Change-Id: Ic2776459f695c9f334f83916b1c9bbe5646a3b9d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Each loop was iterating over temporary containers, so use a const auto
variable to hold it and use ranged-for
Drive-by change: make the for-loop variable a const& (QString,
QFileInfo).
Task-number: QTBUG-115839
Change-Id: Idffaedb8e2e8782a0f4f907995f62f3c0de44bba
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
filterLinks() is always called on a temporary QStringList, so make it
take by && (which proves it's always called on a temporary), and modify
the parameter directly.
Task-number: QTBUG-115839
Change-Id: I40611f40cc0096a58d5c9d8e68c5df06d43152e5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
cleanupTestCase(): the loop doesn't modify the member container, so use
std::as_const and a ranged-for.
mounting(): the loop was iterating over a temporary QList, store it in a
local auto variable and use ranged-for.
Drive-by change: add braces to a multi-lined for block.
Task-number: QTBUG-115839
Change-Id: I0542cad4df3730d6a09b39e64a54a84fc0d57062
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Other recent commits have fixed the other Q_FOREACH uses in this file.
Task-number: QTBUG-115839
Change-Id: I03063f3e8f1e99c5a2aa2d9188260f3e79ca43bd
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The density of Q_FOREACH uses in this and some other modules is still
extremely high, too high for anyone to tackle in a short amount of
time. Even if they're not concentrated in just a few TUs, we need to
make progress on a global QT_NO_FOREACH default, so grab the nettle
and stick to our strategy:
Mark the whole of Qt with QT_NO_FOREACH, to prevent new uses from
creeping in, and whitelist the affected TUs by #undef'ing
QT_NO_FOREACH locally, at the top of each file. For TUs that are part
of a larger executable, this requires these files to be compiled
separately, so add them to NO_PCH_SOURCES (which implies
NO_UNITY_BUILD_SOURCES, too).
In tst_qglobal.cpp and tst_qcollections.cpp change the comment on the
#undef QT_NO_FOREACH to indicate that these actually test the macro.
Task-number: QTBUG-115839
Change-Id: Iecc444eb7d43d7e4d037f6e155abe0e14a00a5d6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Previously name() has always used underscore and bcp47Name() dash; let
the user chose which one best fits their needs.
[ChangeLog][QtCore][QLocale] QLocale's name() and bcp47Name() now let
the caller chose what separator to use between the tags making up the
name, where there is more than one.
Change-Id: Ia689e6a3fb581b42905e7fb1ae7a7b688244d267
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and rename it to qbswap(), thus enabling the endian conversions
for Id128bytes via q{To,From}{Little,Big}Endian() functions.
Found during Qt 6.6 API Review.
Pick-to: 6.6
Change-Id: Ie320cee52ec2b9de0aaa112adec8febb7f5b68a2
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Accent color role has been renamed according to name rule of other
color roles in QPalette.
Fixes: QTBUG-116107
Pick-to: 6.6
Change-Id: I70ac98a1e97afbdc7ea5f8d79f808c307e170712
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reduce test precision to account for rounding errors, and at the same
time increase the setup precession by premultiplying in rgba64 instead
of argb32, which makes the test randomness trigger more regularly.
Pick-to: 6.6
Task-number: QTBUG-115945
Change-Id: I3e95449ada26ff5bb0acc00412f345733603f4c0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The function was replacing the `>` character in generator expressions coming from `add_compile_definitions`. This was creating generator expression syntax errors. Discard generator expressions from character replacing.
Add tests for the three cases.
Fixes: QTBUG-111717
Change-Id: I694d2908738085fdf15112834f20183a9f393422
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When changing the current index while the tab bar is not visible,
calculating the necessary scroll offset might result in wrong results if
the tab bar still has an old size. When the tab bar then gets shown and
resized, the scroll wouldn't be corrected, potentially leaving tabs
unnecessarily scrolled out.
We don't need to make the current index visible if the tab bar itself is
not visible, it's enough to flag the layout as dirty so that the next
show event (which either way makes the then current index visible)
triggers a laying out of the tab bar tabs.
Amends e851d4c06154bf02b23030ff1f7024a8b9edf874.
Fixes: QTBUG-115109
Task-number: QTBUG-113140
Pick-to: 6.6 6.5
Change-Id: I3d8633f9f8b907a36190123839a6104a17bfe138
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The test removes the file in memfs that IndexedDB settings use as the
backing store. This forces a new instance of IDB settings to read from
the actual IndexedDB, instead of the file.
Change-Id: I7c04a90ae80e47b7742bd133b2d9327ce0063fe2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
It has always returned dash-joined forms of the locale names, and
callers who need an underscore-joined form have been obliged to
replace('-', '_') before using them. Given that everything it adds to
the list comes from QLocaleId methods that accept a separator, it's
trivial to let it offer the same choice to its callers and save them
this hassle.
Amended code in QTranslater and QMimeType to save them that hassle.
[ChangeLog][CoreLib][QLocale] QLocale::uiLanguages() now lets the
caller choose what separator to use between the tags that make up each
locale-identifier in the list returned.
Change-Id: I91fcd0b988d9a64e0e9ad9e851f6cb8c1be8ae50
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's ... broken. Found and filed lots of bugs. Add #ifdef'ery and
QEXPECTED_FAIL() to document the state of affairs, hopefully reminding
us to fix these things come Qt 7.
Task-number: QTBUG-116064
Task-number: QTBUG-116076
Task-number: QTBUG-116077
Task-number: QTBUG-116079
Task-number: QTBUG-116080
Pick-to: 6.6 6.5
Change-Id: I29e89fdf995ddf60ef1e03c7af009e80980c9817
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We were only ever testing with a 0 seed, even though the function was
called for all QFETCH_GLOBAL seeds.
Add the seed.
Amends 5e93361888.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I3c78714ad6fb3f94233789dd2c8884d9b157fa76
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
