Recently, a dependency on Qt D-Bus was added to
Qt Platform Support if Qt was configured to support it. Since
Qt defaults to checking for Qt D-Bus at run-time, the platform
plugin and thus all applications would depend on libQt5DBus.so.
Qt D-Bus really doesn't make much sense on Android, so we default
to disabling it instead on this particular platform. People
with use cases where this might be used can still configure Qt
to include support by passing -dbus to configure.
Note that this makes OS X and Linux builds consistent with
Windows builds, where Qt D-Bus was already disabled because
the dbus.h header was missing.
Change-Id: Id733ff00918c706bf1aa5a667299e7d578b4b0c1
Task-number: QTBUG-44581
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
spaces in the source dir are not supported for now, as that requires
some more profound refactoring of the bootstrap makefiles.
Change-Id: Ie0c07a1558b8326f642f2ea144bc1cd85ee761af
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
apart from being more readable, it has the side effect of being resistant
to spaces in the build path.
Change-Id: Id12603c3a96765913e747fba4070d49de0705315
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Including math.h can pollute the default namespace, and break
some compilers if cmath versions of the method are declared as using.
Switching to C++ math functions also greatly simplifies handling of
float qreal as C++ automatically chooses the right method.
[ChangeLog][QtCore][QtMath] qmath.h no longer includes math.h, so any
sources depending on that indirect inclusion may fail to build.
Change-Id: I4d0e331dafba354ec05dc5052e61ef4ff8d387fe
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Qt Multimedia can be compiled with either GStreamer 0.10 or 1.0.
0.10 takes precedence over 1.0 if both are available (1.0 will be used
by default in Qt 5.6).
Auto-detection can be overridden with -gstreamer <version>.
Change-Id: I74d58d2c146c842902375b4d1e5e6e96d32addac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
To ensure QtCore can be rebuilt and get the exact same results,
it is undesirable to hardcode the build date into the library
Also deprecate QLibrayInfo::buildDate since it is relies on the build
date. QLibraryInfo::buildDate was originally meant for evaluation
licenses and such, but isn't used for that any longer.
Change-Id: I98e91ca3e55f877e6ac0e02de289dc29422fc9da
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Option -separate-debug-info is not enabled by default, even help
claims it to be enabled.
Change-Id: I4a986acbb2b7f2c7bf7feaaff29bcc6bfadcc559
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
It will be used on Unix systems if the required dev package is
present. (Detected by a configure compile test.)
You can configure with -no-libproxy to avoid the dependency.
It will not be used on OS X or Windows, as we already implement
the native API for getting proxies there.
Currently we use whatever PAC runner is provided by the distro
for running PAC scripts - if we want to run PAC scripts using
Qt, then we would have to implement a pacrunner plugin to libproxy.
Note that their webkit pacrunner is using javascriptcore already.
Tested using the libproxy 0.4.7 that is included in Ubuntu 12.04.
Re-tested using Ubuntu 14.04 which ships libproxy 0.4.11.
It works except when both socks and http proxies are configured in
the manual settings - in that case libproxy returns only the socks
proxy. This seems to be covered by libproxy issue 119.
[ChangeLog][QtNetwork] Introduce libproxy backend for Unix platforms,
enabled automatically if the required dev package is present
Task-number: QTBUG-26295
Change-Id: I521c0a198fcf482386ea8a189114a0077778265c
Reviewed-by: Richard J. Moore <rich@kde.org>
these reflect the on-target paths (unlike /raw, which are host paths, just
without the -sysroot). this is necessary for anything deployment-related,
starting with RPATH.
Change-Id: I13d598995d0e4d6cb0dc1fc7938b8631cf3e3a95
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this cuts down the bloat in the binaries and the binary patching
requirements in the installer.
as a side effect, the sysroot and makespecs are not binary patchable any
more as well, which is ok, as the installer does not do it anyway.
we now also warn if -[host]<foo>dir is not a subdir of -[host]prefix, as
putting things outside the prefix is anti-thetical (the obvious
exception being the (unix-only) -sysconfdir).
Change-Id: I878f0e71a4dfcfd55b2f8b1cf3045b98b502569b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no reason at all for it to be an external script.
Change-Id: I836f38dd06f61350dd9f83015857abb07981c62d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
We don't yet have API compatibility, apparently, so we need to keep up
with those changes.
Dropping support for older versions is not yet acceptable since some distros
(in particular current version of some embedded ones) may ship these versions.
Change-Id: Ibea780abd76c4b89661012dfea46868b432ded42
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Add support for SSL on iOS/OS X by adding a SecureTransport based
backend.
[ChangeLog][QtNetwork][QSslSocket] A new SSL backend for iOS and OS X,
implemented with Apple's Secure Transport (Security Framework).
Change-Id: I7466db471be2a8a2170f9af9d6ad4c7b6425738b
Reviewed-by: Richard J. Moore <rich@kde.org>
With change macro is in line with QT_NO_<feature> style of naming
macros. This way it will also be automatically added to file
mkspecs/qmodule.pri in QT_NO_DEFINES value.
Change-Id: I111d07fd015994290c54e00e8aac2d6dbdb7de9e
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Commit d44781730c disabled use of pkg-
config on Mac, which in turn automatically disables all of the tests
that depend on pkg-config too, like D-Bus. If you then use the -dbus
flag, configure would error out telling you that it couldn't find D-Bus,
despite it being there.
Now we print some helpful information on error and extra information for
finding out why it may have got disabled.
Change-Id: Ic4e41c58d62d80eb1a0f3ca1c93529e049aaf231
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It was not possible to determine whether Qt is being built as
a shared or static library in the config tests, as that information
was not added to QMAKE_CONFIG used in the compileTest function.
For linking to ICU on Windows, there is logic which depends on
it in config.tests/unix/icu/icu.pro, but was broken for the static
target, as the expected library name was not found (icuXX -> sicuXX).
Change-Id: I22c2d543ea14feebbad36961c9a29e99f66323ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Adds a configure check for System V and POSIX IPC.
System V takes precedence over POSIX IPC, and if both
are not supported, QT_NO_SHAREDMEMORY and
QT_NO_SYSTEMSEMAPHORE are defined.
This patch is a forward-port from 4.8 branch
(6ef4abaa9cd7d465cbae5cbf8cb4664bef387d10).
Change-Id: I3ec20342f0f0266843479634109b67c6989dd296
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit a2da88712f was incomplete. Though
it did enable building of QtDBus without the libdbus-1 headers, but it
still kept looking for it. We don't need to do it anymore if CFG_DBUS is
the default (runtime), so skip the actual check.
This commit does not change behavior. All it does is skip the D-Bus
tests if we're about to use dlopen'ed libdbus-1.
Change-Id: I3947443c9ef6cc409cb6b154564f8af6fb5de84e
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
When CFG_DBUS != "no", we enable the build of linuxaccessibility in
src/platformsupport, which requires QT += dbus to work. When no dbus
headers are found, CFG_DBUS is set to runtime, which means we'll
enable a11y but "dbus" will not end up in qconfig.pri and therefore
src/dbus is not built at all (and not before platformsupport). Therefore
the build in platformsupport breaks.
So even if CFG_DBUS is set to "runtime" we need to make sure that dbus appears
in qconfig.pri.
Task-number: QTBUG-43205
Change-Id: Ibbe5e66552226cdcc1ce16fb83556406f3bb0e09
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Supports relative pointer, axis, keyboard and touch events.
libinput support is only available in combination with libudev.
libxkbcommon is required to perform key mapping. For now the
default keymap is used always (selected when building xkbcommon).
[ChangeLog][QtGui] Added a plugin to get mouse, keyboard and touch events
via libinput.
Change-Id: I469d8992c0cd3e79225cefaeb931697baf86a92b
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
... and use it with the opengl compile tests.
Change-Id: I402574be332e41c721a758e63a233d193224f16b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The compile.test script expects -I... parameters. Passing just the
include path is therefore wrong. Pass cflags instead.
Change-Id: I0f9b155d1e710fe7d77c64a867a89290d4f31db3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Most of QtDBus already needs very little from libdus-1, so create an
extra header containing the minimum API we actually need.
One large advantage of this solution is that now QtDBus can always be
enabled, even if the system doesn't have libdbus-1 installed. This is
interesting on OS X, where libdbus-1 is often installed by Homebrew or
MacPorts, which may include extra libraries we don't want in our
packaging.
Change-Id: I1b397121ec12eeca333ef778cf8e1c7b64d6b223
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Conflicts:
dist/changes-5.4.0
7231e1fbe2 went into 5.4 instead of the
5.4.0 branch, thus the conflict.
Change-Id: I70b8597ab52506490dcaf700427183950d42cbd1
There was an override for Android which would disable the configure
error when doing an OpenSSL build without having the headers
available. This has several times lead to packaging errors where
OpenSSL gets disabled but it's not noticed before the package testing,
which delays the process.
I'm not 100% sure of the reasoning behind the override, but I think
it's a left-over from Necessitas where OpenSSL was statically linked
into Qt.
Change-Id: I2bdc33fb60c59cd493987959d4bbbbb4e9735a92
Task-number: QTBUG-42851
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The new default compler is gcc 4.9, it is needed to compile
64 architectures.
Change-Id: I7ccbac7615b6dc20f5b0441908590de7d4a2e8cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
The change was made too late in the 5.4.0 release
cycle, and broke the Qt build and deployment in
several areas:
- macdeployqt
- OS X 10.7 builds
- shadow builds
This reverts commit c0a54efc40.
Change-Id: I1c1ad4901228f5516352ccdfa963e8ea2b5013b6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
configure script has been silently accepting whatever flags that begin
with "-feature-" even if the feature name does not exist at all.
Since the script validates many other flags, this behavior can make
users believe flags they supply is valid when it isn't.
Besides, this option is currently not protected against typo in any way.
This commit verifies those flags against content of
"qtbase/src/corelib/global/qfeatures.txt" and fails if supplied
flag is not a valid feature name.
Change-Id: Ib19ec66dd5558fb5491e8e080ce07d4807d94c1f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Apple will from February 1, 2015, require all applications uploaded to
the App Store to be built for both 32-bit (armv7/s) and 64-bit (arm64).
https://developer.apple.com/news/?id=10202014a
We enable fat Qt binaries by passing both -arch armv7 and -arch arm64
to clang, which takes care of lipoing together the two slices for each
object file. This unfortunately means twice the build time and twice
the binary size for our libraries.
Since precompiled headers are architecture specific, and the -Xarch
option can't be used with -include-pch, we need to disable precompiled
headers globally. This can be improved in the future by switching to
pretokenized headers (http://clang.llvm.org/docs/PTHInternals.html).
Since we're enabling 64-bit ARM builds, we're also switching the
simulator builds from i386 to fat i386 and x86_64 builds, so that
we are able to test 64-bit builds using the simulator, but we're
keeping i386 as the architecture Qt is aware of when it's building
for simulator, as we need the CPU features to match the lowest
common denominator.
Change-Id: I277e60bddae549d24ca3c6301d842405180aded6
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Defaulting to absolute_library_soname on configure -rpath is no longer
necessary as now we support @rpath install name ids on OS X and iOS.
This also sets QMAKE_SONAME_PREFIX to @rpath for Qt modules when built with
rpath configuration.
This makes Qt libraries relocatable on OS X. Qt SDK is not yet relocatable
though, because plugin location (including cocoa plugin) is still resolved
using absolute path (see QTBUG-14150), also there are several absolute paths
hardcoded in qmake mkspecs pri files.
Task-number: QTBUG-31814
Change-Id: Ie9dffefcd2a946c1580293d433621c1adb7e06c4
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
We set the variables to empty when we start processing, so ${FOO-foo}
will never print "foo". We need to use ${FOO:-foo}.
Change-Id: I00c28edb10d8eaa09df689905a302b576b246806
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
