This option hasn't done anything for quite some time, let's
get rid of it.
Change-Id: Ic6f2830aaf69ba2d054ce21f0d144a61ddf5d06b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Remove a code path for a hpux inside a MINGW section when doing the
opengl detection.
Change-Id: I20b8f7948cd663ec3d6c9dcb891f6fe9a2c9c358
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Setting doubleconversion if Qt is configured with -no-doubleconversion
doesn't make sense. This also brings the output of configure and
configure.exe in line with each other.
Change-Id: I8424cc45b1b69fdb0d074e76868e83544cf5eb38
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Since the system proxies are on by default now then we turn off
libproxy support by default so that there is no risk of a conflict
occurring.
For instance on Linux, it is possible that libproxy indirectly causes
KDE 4 libraries to be loaded which will cause a conflict with the Qt 5
libraries. Therefore we turn it off by default, since the system
proxy setting is the overall better one to have.
[ChangeLog][Important Behavior Changes][QtNetwork] libproxy is now
turned off by default. Configure with -libproxy in order to enable it
again.
Task-number: QTBUG-53649
Change-Id: I0c6c5b9091dc2b2b7662fd44f2a1b49c622e563f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
Reviewed-by: Richard J. Moore <rich@kde.org>
FreeBSD uses gcc as the default compiler until FreeBSD 10 where it was
switched to clang for the whole system. Choose freebsd-clang
for any system release > 10, otherwise choose freebsd-g++ by default.
Change-Id: I2bf38aa027453c25ed2a29d587c2962ded5fcd4a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
By changing the system proxies option default to being on, we
set it to be the more natural default setting. This is down
to the fact that people tend to assume that this is already
the default option.
[ChangeLog][Important Behavior Changes][QtNetwork] Proxies from
system settings will now be used by default. Configure with
-no-system-proxies to disable.
Change-Id: Iec5bbde9dff1311ce44418f6aa024bda05388cf6
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Peter Hartmann <peter-qt@hartmann.tk>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This fixes a long-standing issue for Qt packages, where the
paths detected at configure time do not necessarily match the
paths on the user's machine. Hence they have been stripped
manually from qconfig.pri so far, preventing moc from resolving
some includes.
The same logic in configure is left alone for the time being,
since the paths there are also used to filter paths returned
by pg_config and mysql_config. I expect that this will
eventually be removed too in a bigger refactoring going on
right now in dev.
Asking the compiler for implicit paths only works for non-msvc
builds - that is, gcc, clang and icc fortunately have a
compatible way to retrieve the paths. MSVC works
solely on environment variables, which will be taken into
account by a separate patch.
[ChangeLog][qmake] The implicit compiler directories that
moc needs for resolving include files are now determined
when qmake runs. So far QMAKE_DEFAULT_INCDIR was determined
at configure time, which might be wrong for relocated
installations.
Task-number: QTBUG-52687
Change-Id: If0706e8c56a5aca2b6e777e79e90342c498726f3
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Qt 3/4 had NIS configure options and tests for NIS defines,
those were used in QPrintDialog at the time to support
NIS-printers. As the implementation went away a long time ago
and no NIS featueres are implemented anywhere in Qt, the
configure options and config.tests for NIS can be removed.
Change-Id: Ie920e6a422540bf938623265b6ee68c793aeff84
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This info wasn't really very helpful, and would anyway always
contain either Preview, OpenSource or an empty string for
commercial users.
Change-Id: I311b991834fa83cf1a183083acd5112cda3d2e41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
FreeBSD 9.3 is still supported and uses gcc as the default
compiler, therefore FreeBSD ports require patching the mkspecs
back. To avoid patching, move the mkspecs back to the right
place and adapt the path in the qmake.conf/qplatformdefs.h
[ChangeLog][FreeBSD] The freebsd-g++ mkspec was moved back and no
longer requires the "unsupported/" prefix, matching the FreeBSD
ports tree, as FreeBSD 9.3 still defaults to using GCC. Users of
GCC that did not previously use the ports patch will need to adapt their
build scripts and drop the "unsupported/" prefix.
Change-Id: Ideda4a33cccf5381000f6f50b6ae92a5c24ba9d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some platforms (e.g. FreeBSD) do not have libdl, but dlopen and related
functions are part of libc. So first check for dlopen in libc, and only
if that fails, look for it in libdl.
Task-number: QTBUG-52951
Change-Id: I65a8ed18fce157da32f4e1ffeba30d7513385a8f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
release_tools is not set in pure release builds - in fact, we complain
if it is.
Change-Id: Ifac73c0ef6f8967155b63f7fc9c9ce9de1acf337
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Let the user know that configure's switch from -no-freetype/-qt-freetype
to -system-freetype when -fontconfig is used is expected.
Task-number: QTBUG-35886
Change-Id: I95daaeffb0878bb785149f314096405a5c0fdc7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The "checking for xxx... [yes|no]" is chosen so that it matches exactly
what GNU Autoconf does. That way, any tools that parse the output will
have less trouble.
This feature is useful for us when debugging a build, as not all checks
produce output in the configure summary.
Change-Id: Id75834dab9ed466e94c7ffff14456edb646a1ced
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this was meant to be part of d8be8110a, as qmake is obviously also a
bootstrapped tool.
-I/-L/-F/-l/-fw already had no effect on qmake.
Change-Id: I5095742ef5401558cc4432e7a774d0851d417bb0
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Have configure add a "CONFIG -= precompile_header" to qmodule.pri when
-no-pch is specified. Ensures that Qt is built without precompiled
headers (as requested) even if allowing precompiled header use is the
default for the toolchain.
Parallels changes to Windows configure.
Task-number: QTBUG-11545
Change-Id: Iab4021e74c4e9978770e917dff97b976c449dd8b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
[ChangeLog][Important Behavior Changes] Support for DirectFB is no
longer enabled by default, due to lack of development in upstream. To
re-enable the platform plugin, pass the -directfb option to configure. If
there is no interest in this platform, the support will be deprecated in
Qt 5.7 and will be removed in Qt 5.8.
See: http://lists.qt-project.org/pipermail/development/2016-March/025273.html
Change-Id: Icaa7fb2a490246bda156ffff143c62515a5f575b
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
There was a small logic error in the code selecting the debug/release
C(XX)_FLAGS used when compiling qmake, that could lead to us not
specifying any flags at all.
Change-Id: I5d3c44367d535a17570e3602029b84a02706d624
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
macx-g++ is not supported anymore.
Change-Id: Ibae25768e240d6e8e27c09a345ea02a9b0477fc3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
There's no reason not to allow compiling Qt without any QPA
plugins. It's enough to clearly warn about it at the end
of configure instead of aborting the build.
Change-Id: I52ff681b68fcbfd9c5e28e555224812e6c441dc6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This functionality will get replaced by a new and more flexible system
to configure Qt.
Change-Id: I04cf694ab1671eeed39b79a660566595a22f54a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
With 5.7, we can rely on c++11 atomics (or the msvc ones), so
the note doesn't make sense anymore.
Change-Id: I10cc67f3dd840f3272ca975c2c9120a8c871a2fb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
so it turns out that the 'unix' conditional in moc.prf meant that the
feature was not enabled *anywhere* by default, as the unix configure
disabled it everywhere.
amends b3fcaea5.
Change-Id: Ie41ed2ebc338e560b8d6bfbb0bb18888e31b6d13
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Make sure we always set the base feature as a flag in qtconfig, and
set the sub-feature in addition if it's being used.
Change-Id: Icfeb0ec1ac9e1a615b5b22eb5fcce47e0e7fc153
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This makes the -separate-debug-info configure optional functional, which
generates dSYM debug info bundles for Qt libraries on Apple platforms.
Task-number: QTBUG-37952
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia247674740bf450130a15db926df07fa9007e2ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Detect if DirectWrite 2 is available, and support color fonts if possible.
One limitation worth mentioning is that if the color font contains regular,
monochrome glyphs as well, then these will be drawn in black, and not in the
pen color. Fixing this would require some elaborate rewrites in the font
rendering system, since we would have to have two font caches per
color font (one for mono and one for colors), or do some sort of trick where
we make argb(r, g, b, 0) mean subpixel alpha instead, and detect glyphs that
are not correctly premultiplied when blitting to the screen.
Another limitation is that the approach does not work with distance field
rendering. In principle we could support this on Windows, since the
format is vector based, but it would also require substantial work and
it is not possible to support for Apple/Google fonts anyway, so it would
just lead to code which is not cross-platform.
[ChangeLog][Windows] Added support for color fonts (color emojis) when
DirectWrite 2 is available.
Change-Id: I6a608dd5d2aa3a7e762a06830902bddac7c550a5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
These values are artifacts from the past and not used anymore
since Qt 3 times.
Change-Id: Ide2a7b3bd000ec0bc280a5467549c1a974c019e0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The feature is called gtk3, so the naming of the CFLAGS/LIBS should reflect that.
At the same time, remove the unused QMAKE_LIBS_QGOBJECT variable.
Change-Id: I565a098aaa80f380de0da534d058f315e77a33f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
no-zlib is no longer supported, so these lines can't have any effect.
Change-Id: Ib5ef9a97a0687945606b4a718e339590bc501fe9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The feature is called xinput2, so the defines should have this in their name as well.
Change-Id: I661dd3ea3726f4a0954e788d5f0083ace10bbe89
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Most libs use QMAKE_LIBS/CFLAGS, but some have other naming
conventions. Unify them into using QMAKE_LIBS/CFLAGS.
Change-Id: I39b188adc1f9a223a83b294c5315c3095a9c68de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's 2016, and file sizes larger than 4G are common, so
-no-largefile is something we really shouldn't support
anymore.
For now left the implementation as is, just removed the
configurability from the command line. But this should
really get replaced by decent configure checks that
check for 64bit stat() vs stat64() vs 32bit stat().
Change-Id: I057515e3cc1f06a022d80f02e866944428026b1d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These are not being used in Qt anymore, we use their
xcb replacements instead where it makes sense.
Task-number: QTBUG-30939
Change-Id: I2d8141818b402c23b29b0c0398f876a6189d0d27
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Compiling the drivers into Qt Sql does not make a lot of sense
anymore, as we handle plugins well enough in the build system
these days.
[ChangeLog][Build system] SQL drivers are now always compiled as plugins.
Change-Id: I364b82a480849399d1fafe4b20e9f08922569260
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Our handling of plugins when Qt is build statically is
nowadays good enough, so we don't need to build the
JPEG and GIF support directly into Qt for static builds.
Let's simply always build them as plugins.
Also simplify the logic in configure, and get rid of the
no-gif, no-jpeg and no-png config variables.
[ChangelLog][Build system] JPEG and GIF image support is now
always built as a plugin. Removed -imageformat-[jpeg|gif]
arguments to configure.
Change-Id: Ic01559ff406c966807b3be8761252e8802adcdf7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This brings the feature name in line with the name
of the define.
Change-Id: Ib56c9c25ce83c396e5085d69efd3fe953c1aadd0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
...instead of overwriting when building qmake for windows.
Change-Id: I89eb33439b03a0ad33d006d12c9896c87d271c4f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The plugin builds as a static plugin.
It is based on the Linuxfb plugin.
It uses the INTEGRITY FB API for framebuffer for display, and HID API
for input (mouse, keyboard, touch).
Because this is the only supported plugin and requires to be included
as a static plugin, automatically add the platform to any application
through qmake.conf.
Change-Id: Ic228afb59cb39dd02c2d538de46caf6e6ea7d153
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
Targets (xplatform) include integrity-armv7 and integrity-x86.
[ChangeLog][Platform Specific Changes] Added support for INTEGRITY RTOS.
Change-Id: If7827791e0a977ff198cb99e9dcc684a010bbb81
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it is important that the flags coming from the current qt build appear
first, as otherwise a pre-existing qt installation may interfere with
the build.
the windows configure does not have any of this magic to start with.
Task-number: QTBUG-6351
Change-Id: Iacc1d9b5aa9eed9a5f0513baef9f6c6ffcef0735
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
now that we rely on consistently sane runpath semantics everywhere
(--enable-new-dtags on linux; the default elsewhere), there is no use
in forcing our runpath downstream: our libraries will find their
dependencies due to their embedded runpath.
this does not affect qt.prf adding qt's own library path to the user
projects' runpath.
this effectively reverts 42a7eb8df6, and some more.
Change-Id: If7af7be7b7a894bebb9b146ccb0035452223c7ac
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This test was the old way of checking whether to enable
c++11 functionality. That is now anyway required, so there
is no need for this test anymore.
Change-Id: I083e85a4698cac6bd9b573525c7b977f63e14113
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Simplify the handling in the pro files as well. system-zlib
is the only option deciding whether we use our bundled copy
or the system lib.
Change-Id: Id28c1c64c5944e86f0e9cd3533268f43e98522a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We're not currently supporting OpenVG anywhere, so remove
those tests. If we need them in the future, it's easy to get
them back.
Change-Id: I06c0f9f3b3ecaa10a51de84c3059d4eee3a29fad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
The fonts directory is removed in 5.7. Avoid creating a broken
symlink.
Change-Id: I95d1970737f54810006c084436411fc95743f72d
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
This section did set some canBuild* variables based on compiler
checks. Apart from canBuildQtConcurrent, the variables never
got used. In the QtConcurrent case, the answer will anyway always
be yes, since we require a c++11 compliant compiler nowadays.
Change-Id: I660b40e96a657f6fa4d32f6b680adf44e70509c9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These tests are not required to build qmake, so move them
together with the other tests.
Change-Id: I191e7552e819e8d68a27da3ac1b5258d57145155
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Instead show LGPLv3 and GPLv2 as valid options for the
open source edition.
Change-Id: Id7a203226428031ec873cbaf106dca14a854f155
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Preparation for Apple tvOS support, which shares a lot with the iOS
platform.
Change-Id: I543d936b9973a60139889da2a3d4948914e9c2b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
-ldl option was used unconditionally while libdl is not supported
when libc is static.
Add build test to configure which checks if libdl is supported.
QMAKE_LIBS_DYNLOAD in "src/corelib/plugin/plugin.pri" is now used only
if libdl is available.
qt_linux_find_symbol_sys from qlibrary_unix is now used only if
QT_NO_DYNAMIC_LIBRARY is not defined.
Initially reported by Buildroot autobuilder here:
http://autobuild.buildroot.net/results/a85/a85a1839a45fb6102e53131ecc8f6dadf92bcdc2
Change-Id: I0397472456efdc4f3ab5f24d01253bee8048a9d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Modern FreeBSD doesn't come with GCC by default anymore and doesn't even
provide the "gcc" or "g++" falback that OS X does. So there's no point
in keeping the freebsd-clang mkspec in unsupported/ since it's the only
one that works, or keeping the freebsd-g++* ones outside, as they won't
compile.
I'm not removing the GCC mkspecs because you can still install GCC from
the ports tree.
[ChangeLog][FreeBSD] The "freebsd-clang" mkspec is no longer in the
unsupported/ subdir. If you have scripts you use to build Qt, you'll need to
update them to say -platform freebsd-clang or remove the -platform argument.
Change-Id: I7a9e11d7b64a4cc78e24ffff142dfc11d3aabb1e
Reviewed-by: Raphael Kubo da Costa <rakuco@FreeBSD.org>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
the presence of a [Paths] section causes QLibraryInfo to derive all
property values according to the Qt default directory layout,
disregarding the compiled-in paths from configure. consequently, we need
to write them all to qt.conf as well.
Change-Id: I3558e9aef1fce956812ea91e216f53bf7934c285
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
there is no point in overriding the built-in defaults with the same
values.
Change-Id: I24f66b86f751f7044625b5256f3d979ece782cf7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
'local' is treated as a command, so its arguments need to be quoted,
unlike in a real variable assignment.
amends 4b557751e.
Change-Id: I5a4c929e52e2344a6129c8e9dd4c0c80cd408ff0
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The C++ standard says it must, but some badly-configured toolchains seem
to be lacking support.
In particular, for some 32-bit platforms without native support for
them, GCC implements 64-bit atomics via out-of-line functions in
libatomic. If that library is missing... well, then std::atomic 64-bit
doesn't work and we mustn't try to use it.
This was found when trying to compile Qt 5.6 for MIPS 32-bit:
Linking library libQt5Core.so.5.6.0
.obj/qsimd.o: In function `std::__atomic_base<unsigned long long>::load(std::memory_order) const':
/opt/poky/1.7/sysroots/mips32r2-poky-linux/usr/include/c++/4.9.1/bits/atomic_base.h:500: undefined reference to `__atomic_load_8'
.obj/qsimd.o: In function `std::__atomic_base<unsigned long long>::store(unsigned long long, std::memory_order)':
/opt/poky/1.7/sysroots/mips32r2-poky-linux/usr/include/c++/4.9.1/bits/atomic_base.h:478: undefined reference to `__atomic_store_8'
Yocto bug report: https://bugzilla.yoctoproject.org/show_bug.cgi?id=8274
Change-Id: I42e7ef1a481840699a8dffff140224d6614e5c36
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 3d7586b760)
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
This function is introduced to safely provide poll(2)-like semantics for
socket multiplexing on Unix-like platforms. For platforms where no poll
system call is available, an implementation based on select(2) is provided.
Change-Id: I320e97dae5924316675a74d1897c48cae292ac6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Platform Specific Changes][OS X] Configure with -no-rpath
will now yield Qt dynamic libraries and frameworks with an absolute
install name (based in -libdir).
OS X package managers like Homebrew install Qt in a fixed location. This
change simplifies deployment for such package managers and is consistent
with the default expectation on Apple platforms for libraries with a
fixed location to also have absolute install names.
While a relocatable installation (the default) also works in this
scenario, it requires all software that depends on Qt to be aware of
this and to embed a suitable RPATH into application binaries (which is
not automatic for non-qmake builds). This might not be true for some
select fallback search locations, but as package managers on OS X tend
not to use those, embedding an RPATH becomes practically mandatory. In a
default Homebrew installation, Qt is configured such that the frameworks
end up in /usr/local/Cellar/qt5/<version>/lib and that will be later
symlinked to /usr/local/opt/qt5/lib, both of which are not searched by
the dynamic linker by default.
Task-number: QTBUG-48958
Change-Id: I4395df98771e06a2ce8a293d11dc755bdc50757f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since 4f8c75acbd, we require HB>=0.9.42, which assumes
multi-treading support.
On OS X, -qt-harfbuzz is still required for AAT fonts support.
Change-Id: I2a95b2c245a1eb2c580306ede7ee4eb0c7727317
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The part of qmodule.pri that is supposed to set QT_CPU_FEATURES ends up
missing in the output.
Change-Id: I30f3dbad5ac22d32e25d63037980dac370adc4ea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
instead of building host tools always in debug mode, follow the overall
build type, and provide an option to override it.
this supersedes the pre-existing -optimized-qmake option.
however, that option never existed in the windows configure, and this
legacy continues as far as qmake is concerned (msvc builds of qmake are
always somewhat optimized, but not mingw builds).
Change-Id: I42e7ef1a481840699a8dffff13fec2626af19cc6
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The major changes compared to the Gtk+ 2 version are:
* Everything is ported to modern Gtk/Gdk API.
* GtkFontChooserDialog is used instead of deprecated GtkFontSelectionDialog.
* Hiding buttons on dialogs (like OK/Cancel) is no longer supported, as it is
impossible to do that with dialogs using GtkHeaderBars.
* Some workarounds were added to the QGtk3Theme constructor to correctly work
with Gtk+ 3.
[ChangeLog][Platform Specific Changes] The Gtk+ platform theme has been ported
to Gtk+ 3.
Change-Id: Iacb01279b6432e0901e3bb1353d5792543cc76e4
Done-with: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
On RHEL 6.6, mysql_config --libs returns "-rdynamic" among other arguments.
The configure test (config.tests/unix/mysql) would end up passing that
to qmake. qmake responds with "***Unknown option -rdynamic ..."
Change-Id: Ib1300e62aec8a5d866359f3eaea88d9648c872b9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Qt now requires it.
We could try and run the common/c++11 test for MSVC too, but we know it
passes, so we won't bother and thus slow down the configure step.
Change-Id: Ib056b47dde3341ef9a52ffff13ef6b53b9f8bb65
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This also fixes the underlying cause of QTBUG-44039 and QTBUG-43885.
You can choose between system, qt, and no libdouble-conversion
support. If you choose "no", snprintf_l and sscanf_l will be
used.
By default, system double conversion is used if the system provides a
double-conversion library. Otherwise the bundled libdouble-conversion
is built. sscanf_l and snprintf_l are not used by default as the
planned "shortest" conversion mode to produce the shortest possible
string will give less precise results when implemented with snprintf_l.
Change-Id: I8ca08a0fca5c54cf7009e48e771385614f6aa031
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Windows' configure.exe supports -ltcg since several years,
this patch adds -ltcg to Unix's configure script.
Change-Id: I3f39086c67c3f4cacd252f63de30e3cfc4aa22bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
A wayland compositor on i.MX6 needs to create the wl_display
before creating the EGL display. This wl_display then needs to be
exposed so that QWaylandCompositor can use it.
Change-Id: Id60f6dd2fbba05140ca0671da6f17dbc2ecce3a3
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
This separation makes it possible to make a
canadian cross build of Qt on a linux build machine.
The canadian cross build requires an external Qt that
runs on the build system.
Change-Id: Ifd83a4c6376d3299647e74bb349a3452a6f433fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This commit removes the legacy ptrsize check, which was deficient
because it did not work for multiarch systems (when we supported fat
OS X binaries) and did not work for bootstrap builds because the size
might be different when cross-compiling.
Instead, let's rely on the predefined preprocessor macros to detect
correctly. As a nice side-effect, this fixes 64-bit Android builds
cross-compiled from Windows.
Task-number: QTBUG-48932
Change-Id: I1d0f78915b5942aab07cffff140f9a52b9342f23
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>
This bug occurs if ./configure is called with -v on systems on
which fd proc entries point to the files/devices they are open
on instead of being magic nodes which would basically dup() the
actual fds (e.g., Linux).
In this case, the command "tee $tty" appends to /dev/stderr, which
may be already opened by the parent process. This breaks the log file.
Normally, the log file starts with
This is the Qt Open Source Edition.
...
but with `-v` flag it would start with output of awkprog and maybe
some zero bytes. Zero bytes are observed on Debian Wheezy.
DEFAULT_INCDIRS=...
...
^@^@^@^@^@^@^@^@^@^@^@^@...
Done running configuration tests.
...
To fix this problem, the output of `...` is saved to a variable, and
then eval'd and echo'd (if -v).
This solution was found by Tony Theodore.
https://github.com/mxe/mxe/issues/938#issuecomment-149770348
Change-Id: Id0c28598890e813774cc92f38ee46a0697b34e77
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The check was broken on non-bash and producing errors like this:
/home/louai/work/qt5/qtbase/configure: 4528: [: Illegal number:
Change-Id: I5e78ad002cd7cfb401f2646510e0923f77c55f98
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since the Qt headers require them now, we need to ensure that happens
properly.
Change-Id: Ib306f8f647014b399b87ffff13f14196c2c75bef
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We'll remove it in Qt 5.7, so people ought to be notified now.
Change-Id: Ib056b47dde3341ef9a52ffff13ef6caa91757a9f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Redirecting on every command is wasteful.
Change-Id: I42e7ef1a481840699a8dffff1404fa0602805d1b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's easier to parse than qglobal.h. The objective is actually to have
macros with parts of the version number, so the major or minor numbers
could be used in other preprocessor macros.
Change-Id: I42e7ef1a481840699a8dffff1404eda1dd5c308d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
KMS is no longer a platform plugin so the relevant leftover bits are
now removed.
As the introduction of the EGLDevice-based backend for eglfs shows,
using DRM/KMS is not tied to GBM, separate buffer management
approaches, like EGLStreams, work fine as well. Therefore separate KMS
from GBM and remove the EGL and GLES dependency in the tests - this
way there is nothing preventing us from using GBM without GL for
example.
Change-Id: Id7ebe172b44b315f9a637892237d2bb62d99aed2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
For now we pick one crtc and find the corresponding layer. If this is
not desired, set QT_QPA_EGLFS_LAYER_INDEX to override the layer to be
used. Enable qt.qpa.eglfs.kms to get logs about the available layers.
Change-Id: I762783f960739e32966c8cde17d8f55fbe40091f
Done-with: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
-xvideo was not used even by Qt 4 for a long time.
-xinerama was used by the xlib plugin which was dropped
by e6a7a6a381.
Change-Id: Iea97f643570d98f84ad1ce6f16e911dc92d617b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
It's obsolete since e6a7a6a381
(Remove xlib plugin) and a2337f79ff
(Remove Windows and X11 from src/widgets/platforms).
The actual option is -xinput2.
Change-Id: I28bf03963a8edc5c69330605ba072fbfaefb05e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
[ChangeLog][QtDBus] The QtDBus library now links directly to the
libdbus-1 system library if it was detected at configure time. To force
linking to the library, pass option -dbus-linked to configure; to force
dynamically loading at runtime, use -dbus-runtime.
Task-number: QTBUG-14131
Change-Id: Ie33d1f22f85b465ab0ce166b8f17b8491eae1c21
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the purpose is to make build log parsers able to ignore build failures
in verbose configure output.
Change-Id: I01af2e019fd1b055fdfcf6749faeebacb7a39c3f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In addition to the proprietary Mali Linux driver bundle from ARM, there
are a couple of semi open source alternative bundles out in the wild,
which are mostly derivatives from the sunxi-mali bundle.
The non-ARM bundles lacks the proprietary header file fbdev_window.h
which defines the fbdev_window struct. Instead, it has an equivalent
mali_native_window struct in the EGL/eglplatform.h (which in turn is
included by EGL/egl.h).
This change adds an alternative configure test which detects the non-ARM
bundles are used. It also removes the dependency on fbdev_window.h by
defining the structure ourselves, which actually makes the plugin
potentially compilable with *any* EGL SDK.
Change-Id: I78ab4b618e8e9c774c889fe9896105cf2cf4228e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
The C++ standard says it must, but some badly-configured toolchains seem
to be lacking support.
In particular, for some 32-bit platforms without native support for
them, GCC implements 64-bit atomics via out-of-line functions in
libatomic. If that library is missing... well, then std::atomic 64-bit
doesn't work and we mustn't try to use it.
This was found when trying to compile Qt 5.6 for MIPS 32-bit:
Linking library libQt5Core.so.5.6.0
.obj/qsimd.o: In function `std::__atomic_base<unsigned long long>::load(std::memory_order) const':
/opt/poky/1.7/sysroots/mips32r2-poky-linux/usr/include/c++/4.9.1/bits/atomic_base.h:500: undefined reference to `__atomic_load_8'
.obj/qsimd.o: In function `std::__atomic_base<unsigned long long>::store(unsigned long long, std::memory_order)':
/opt/poky/1.7/sysroots/mips32r2-poky-linux/usr/include/c++/4.9.1/bits/atomic_base.h:478: undefined reference to `__atomic_store_8'
Yocto bug report: https://bugzilla.yoctoproject.org/show_bug.cgi?id=8274
Change-Id: I42e7ef1a481840699a8dffff140224d6614e5c36
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ppc/ppc64 and 32-bit x86 have been dead for a while.
consequently, the legacy macx-g++-64 spec was most probably not used.
which in turn meant that NATIVE_64_ARCH was never set (in particular on
windows hosts ...), which means that the android ndk host auto-detection
was effectively broken.
the arch code in mac/default_post.prf was also never triggered, so nuke
it as well.
Change-Id: Ic0775e40b273a22e0a15808cac328e0df33c2155
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
[ChangeLog][General Improvements] Qt's buildsystem now detects whether
the compiler supports C++14 and experimental support for C++1z. If the
compiler supports it, then Qt is automatically compiled using that
support.
\
This does not apply to user applications built using qmake: those are
still built with C++11 support only. To enable support for C++14 in your
application, add to your .pro file: CONFIG += c++14 (similarly for
C++1z).
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f5d01c42596
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
As planned for 5.6, QtMultimedia now uses GStreamer 1.0 over
0.10 when available.
This means the binary packages will be based on GStreamer 1.0.
Task-number: QTBUG-47920
Change-Id: I9a18569ff96902116f0f6a759c185a5896f520d5
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This will allow us to drop gtk2 support from qtbase in future,
while still providing the gtk2 style for those who want to use it.
Also with moving to qtstyleplugins, the code can be simplified
because we can directly link to libraries we need, instead of using
QLibrary.
[ChangeLog][QtWidgets] Remove QGtkStyle, it is now provided in
qtstyleplugins repository.
Change-Id: I6221b1a513d7fda32e080f3ca159b0b2f8a8f246
Reviewed-by: Timo Jyrinki <timo.jyrinki@canonical.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jens Bache-Wiig <jensbw@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
SecureTransport is now the default SSL backend on OS X.
Users can still choose the OpenSSL backend by passing the -openssl,
-openssl-linked or -no-securetransport option to configure script.
[ChangeLog][Important Behavior Change] Make SecureTransport the default SSL backend on OS X
Change-Id: I7a4edfdb72e63975d6b31435969702f8e86a10f2
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
[ChangeLog][QtCore][Logging] Systems with syslog may now pass -syslog to
configure to send logging output to syslog.
Change-Id: I80d58ee6e70d8deb2409fc666e7e7f2d7f52b8e1
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Also solves a warning printed:
configure: 4200: shift: can't shift that many
Change-Id: Ib306f8f647014b399b87ffff13f295e2cdb7f8d7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The pipe2/dup3/accept4 functions and SOCK_CLOEXEC are quite old nowadays
on Linux. They were introduced on Linux 2.6.28 and glibc 2.10, all from
2008. They were also picked up by uClibc in 2011 and FreeBSD as of
version 10.0. So we no longer need the runtime detection of whether the
feature is available.
Instead, if the libc has support for it, use it unconditionally and fail
at runtime if the syscall isn't implemented.
Change-Id: Ib056b47dde3341ef9a52ffff13efcc39ef8dff7d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There's really no difference between them, other than -force-pkg-config
skipping the check if the tool is even available and printing a warning.
Change-Id: I04cb83c6649ef73866a84032ea46093c4a00ce00
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Otherwise the information is missing from configure's output summary:
EGLFS ................ no
EGLFS i.MX6....... .
EGLFS KMS .......... no
EGLFS Mali .........
EGLFS Raspberry Pi .
EGLFS X11 .......... no
Change-Id: Iee8cbc07c4434ce9b560ffff13cb331778c70261
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
