This was apparently done so in each of the widget_<platform>.cpp
in Qt 4.8. This then causes the cursor to be updated in
dispatchEnterLeave() on Windows and Linux.
Task-number: QTBUG-27871
Task-number: QTBUG-27585
Task-number: QTBUG-26424
Change-Id: Idf14cd96ccb36f7c2607853ed8b0024c36a5413c
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Enter handling requires knowledge of the mouse
position. Extend the enter handling of
QWindowSystemInterface to receive the position
(implemented for Windows, XCB and Mac), passing it
on to QEnterEvent. Dispatch QEnterEvent from
widgets code.
Change-Id: I49c07d2b1f46310c877017dd55d4cd7d636bdbce
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
While handling events for Widgets and Windows in QWidgetWindow::event
makes sense for other events, it causes QWidget::show/hideEvent to be
called twice when handled like "the rest". Having that as one case here
seems to be the cleanest solution. Removing the call to showEvent from
QWidgetPrivate::show_helper (as proposed in the bug report) causes
autotests to fail and thus is not a viable option.
Additionally the expected result for the task221221 test for
QDoubleSpinBox was reverted to the Qt4 value as Qt4 behaviour was
restored.
Task-number: QTBUG-27199
Task-number: QTBUG-26424
Task-number: QTBUG-22565
Change-Id: I0ac42b09b1a7618de042d27aa5dd1b3d9f30f552
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Seems that these tests are now passing on Windows, so remove the skips.
Change-Id: Id30ef544502f97f8bc84f35f635e39912da3afe8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QApplicationPrivate::leaveAfterRelease was not properly cleared when
mouse event handling was interrupted by a modal dialog, which caused
every mouse move over the modal dialog to trigger enter event to the
widget under cursor.
Fixed by clearing QApplicationPrivate::leaveAfterRelease if mouse event
without any buttons pressed is handled.
Task-number: QTBUG-27643
Change-Id: I4f31daa656bc643c88e5338282a671ae2077e255
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Changed the platform leave event handling logic in QWidgetWindow to
match platform leave event handling logic in Qt4, where last mouse
receiver is used as leave target only if last mouse receiver wasn't
a native window itself. In that case it is assumed to get leave event
of its own when relevant.
Task-number: QTBUG-27639
Change-Id: Id6edcd29754a15c959f18ab38b20d66e5d446510
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Qt::WA_UnderMouse is set/cleared when widgets get enter/leave events.
When there is a popup active, Qt::WA_UnderMouse should always report
false, but this was not happening, because existing state was not
cleared when popup was opened.
Dispatch a leave event for last mouse receiver when a popup is
opened to update the Qt::WA_UnderMouse state. This is roughly
equivalent to what happens on Qt4.
Task-number: QTBUG-27478
Change-Id: I7739e75727213e748ab2f42f1027d32325d89fb0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The disabled state was handled in qapplication_xxx.cpp before.
As the platform integration only knows about windows and
not widgets the state check is now done in qwidget. This commit
just adds key events to the list of events which are ignored
if the widget is disabled. This list also contains mouse events
for example.
Task-number: QTBUG-27417
Change-Id: I55949e1c1aaa992ba71df51c5b5e8177ec6f1e86
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Cursor dependant auto tests are currently skipped in various ways.
Some are checking PlatformQuirks::haveMouseCursor() that tries to
detect if the desktop environment is MeeGo, using obsolete Q_WS_X11.
Some are skipped if QT_NO_CURSOR or Q_OS_WINCE is defined and
some are actually missing the approriate guards.
=> unify by defining QTEST_NO_CURSOR in qtest-config.h when
appropriate ie. for platforms that have no regular mouse cursor
support or when QT_NO_CURSOR is defined.
Task-number: QTBUG-22551
Change-Id: I9a1e0e3156617945ae46226c79268955454c8a9a
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
For consistency, this behavior has been kept across Qt versions... Just
get rid of it.
Also fixes native child widgets not being notified of the change of
window handle (winId) when being reparented.
Updated auto-test.
Change-Id: I3616dc0f1c32a519d78a4846297d6d4a6e926fbf
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Remove QSKIP("Not yet sure why this fails."), the test is passing
on Mac.
Task-number: QTBUG-22321
Change-Id: I5f09d067b1cc837c5e3ada5bbd34091fe1fd723d
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Use the native parent's window if the widget in question does not
have one. This should be in line with Qt 4.8 using effectiveWinId().
Remove redundant code in grabMouse(QCursor).
Change-Id: Id6ab192e739221fe89f865f4d2f7a6d4671a190b
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Bring back code from 4.8 (Note that ALT-TAB is not received
as key event).
Task-number: QTBUG-27146
Change-Id: I6dd2e9c88fdc4c89d26dfaa8ab47deb2be451f25
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Introduced during Qt5 development and renamed to QInputMethod.
Change-Id: If6744648dc98b779e65c449ae32626db574181df
Reviewed-by: Joona Petrell <joona.petrell@gmail.com>
Commit 7808ec79 changes QApplication to synthesize
mouse events from (unhandled) touch events.
On Mac OS X this creates a conflict for two-finger
scroll swipes, which generates both touch events and
mouse wheel events: scrolling in QTextEdit will also
select the text.
Add a SynthesizeMouseFromTouchEvents platform style
hint that enables the event synthesising. Set to true
by default and false in Cocoa.
Change-Id: I1ffa5a141476aa38b81ce92a87eff676c7ec2276
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
When a stylesheet was set on a parent widget then in some cases it would
not get applied to all the child widgets. This was because the order of
the children list may have been modified while it was being set on
children. By making a copy of the list we prevent this from being a
problem.
Task-number: QTBUG-26321
Change-Id: Iea6bf72c69a0c39746f7ef5e7893dda5a93ed7e5
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QWindow::setWindowState is not supposed to set the window active.
The method requestActivateWindow() should be used for that.
When switching from and to fullscreen mode we're always passing
SWP_NOACTIVATE to SetWindowPos to not change the activation state
of the window. This is inverse to the old behaviour, which did not
have an effect.
Change-Id: I339337935cdad76b3ef252202e92177f37543038
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Previously synchronous window system events were
implemented by bypassing the queue and processing
the event immediately. This is not ideal since the
event order is not preserved - there might be "happened
before" events waiting in the queue.
Add QWindowSystemInterface::flushWindowSystemEvents
and change all handleSynchronous* to 1) queue the
event 2) call flushWindowSystemEvents.
flushWindowSystemEvents is almost identical to the
already existing sendWindowSystemEvents with the
exception that it does not call QApp::sendPostedEvents.
Move the common implementation to a new private function.
Task-number: QTBUG-20778
Change-Id: Ie98a83875bc0a14e335e36bed0dd9e0ed4a1dea0
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Use QTRY_VERIFY for the mappped attribute check.
Change-Id: I3cbde9122405bf7067f3702193e80636edc8c5c6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Introduce smart pointers to delete widgets and resources
to ensure tests are not affected by left-over widgets
also in case of failure.
- Replace deprecated QTest::qWaitForWindowShown() by
QTest::qWaitForWindowExposed() and use QVERIFY,
remove some hard-coded timeouts.
- Set some titles and object names.
- Add verbose debug output of event lists in tests
childEvents.
- Set minimum sizes on widgets to avoid Windows warnings.
- Stabilize GDIWidget, trigger on first event only.
Change-Id: I64119a2e7113e4a9f0156d00c72ce0935d03bb81
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
In touch event terminology the global position is the screenPos,
scenePos is the windowPos.
Fixes a tst_qdeclarativepincharea test failure in qtquick1.
Change-Id: Ie98fe12be8cbedc9b019913b066e7c4bce75278d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
While the qWaitForWindowShown(QWidget *) is inherited
from Qt 4.8, the qWaitForWindowShown(QWindow *) was introduced
in Qt 5. As it is identical to qWaitForWindowExposed()
and removed already, it can be deprecated in Qt 5.
Remove its usages in qtbase.
Change-Id: I28788d120ad687a49f02b2b44de6b38a2832fe5c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This patch implement the equivalent of
468626e99a90d6ac21cb311cde05c658ccb3b781 in qtdeclarative but for
QtWidgets.
If a widget doesn't accept a touch event, then QApplication gives it
another try by synthesizing a corresponding mouse event. This way
QtQuick and QtWidget behave in a similar way, removing the need for
platform backends to try to emulate a mouse event from a touch event
unconditionally.
Also add relevant unit tests and adjust old QApplication ones.
Change-Id: Iddbf6d756c4b52931a9d1c314b50d7a31dbcdee9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The previous API was hard to use (global function, no type safety,
manual chaining), and confusing (app vs dispatcher split only made
sense on Windows). Installing and removing out of order would have
the risk of setting back a dangling pointer (crash). Meanwhile QPA
added type safety, and this new API models the QObject::installEventFilter
API for ease of use. The virtual method is in a new interface,
QAbstractNativeEventFilter.
QPA was even calling the dispatcher event filter with QPA-private event
classes, which made no sense (refactoring leftover from when the code
was in the dispatcher). Now the QPA plugins trigger the qcoreapp event
filters with the actual native events directly.
Change-Id: Ie35e47c59c862383bcaf857b28d54f7c72547882
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
- Implement waitForWindowExposed() for toplevel windows.
- Implement waitForWindowShown(QWidget *) and mark as
deprecated in line with waitForWindowShown(QWindow*).
- Use in tests.
- Simplify tests (collapse waitForExposed, setActive
into setActiveWindow, waitForActive), remove most
hard-coded timeouts.
- Stabilize graphicsview tests by using waitForWindowActive.
Change-Id: Ic7c061e2745b36f71a715ee4e47c0346b11a91e8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
When turning off fullscreen mode and restoring the widget's geometry
we must inform the QWindow about the geometry change synchronously.
Otherwise QWidget::geometry() will return the old value.
Using the same technique for the state transition to fullscreen mode
without sending a separate resize event.
Autotest: tst_QWidget::saveRestoreGeometry
Task-number: QTBUG-26421
Change-Id: I869e36cd302d9a94e398f48949ab3cb7ee9cdf51
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
When mixing native and regular widgets in same QMdiArea, some
subwindows didn't properly get set native. This was because
when a native parentless widget was given a parent, it wouldn't
enforce native window on the new parent and its ancestors.
This happened because window flags were adjusted too late in
relation to createWinId() call in setParent_sys().
Fixed by moving the createWinId() call to its proper place.
Also removed some old Q_WS_* ifdeffing in QWidget::setParent() that
masked some native enforcement code.
Additionally removed few QEXPECT_FAILs from QWidget autotest now
that those cases work correctly.
Task-number: QTBUG-26424
Change-Id: Ib6f9d0531e5c7299e2c307734d49c81f1ffa9713
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
To let this test pass, a bunch of test cases had to be disabled.
Task-number: QTBUG-25300
Change-Id: I26bc08f366c43fb2bf3ba42a5fcbeb3888ed02c0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QTBUG-8911 has been fixed some time ago.
Change-Id: I19dae0571b1829f6b3b797f7e0ec5c24a4241db8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Prevent a crash by giving the widget some time to show up.
Task-number: QTBUG-22326
Change-Id: Idaa23b21121e7c4f7098e8d51efd313bcc467e9a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The part of tst_qwidget::reparent() that "makes sense only on Windows"
is antiquated at least since the introduction of alien widgets.
It basically tests if QWidget::winId() returns a valid window handle
(has been replaced with winHandleOf here in the meantime).
This is always successful, because winId() creates a valid window handle.
Change-Id: I52c370e26fd9b34861bd4d52c12dded243382d43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
We cannot use QWidget::grab for widgets that have WA_PaintOnScreen set.
QScreen::grabWindow copies the real screen contents for us.
Change-Id: If1f6233ec48bcb2b941ea683c56ce71a39642e67
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The pointer grabbing leads to fake Enter events being sent to the
Qt::Popup window, preventing it from closing since QWidget::underMouse()
returns true. We should only send Enter events if the mouse is actually
inside the widget.
Change-Id: I4ba3fb08943580f93ad4337ff0227becd647767e
Reviewed-by: Laszlo Agocs <laszlo.p.agocs@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
We'd like to decrease the default timeout for tests in the Qt Project CI
so that we waste less time waiting for hanging tests.
Tests which genuinely take a long time to run, such as these, should
have their timeout explicitly set in their .pro file.
Change-Id: I4fe6249e9efa764b230251d73a1115c24411e168
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ie8ac500f2f8ebe99b7525feaa7b39247e641a461
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These tests were disabled when trying to get CI working on Mac OS
because they asserted or crashed. Now that CI is working well on Mac
OS, start running these tests again, initially as insignificant tests.
CI results will then be used to determine whether the tests can be made
significant.
Change-Id: Ife411e6b8c84ade45c865ef35f3ae0071d6f8d2b
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Remove Q_WS-ifdefed sections and switch by platform name instead.
- Remove Q_OS_IRIX and Q_WS_QWS conditionals
- Fix deprecated QPixmap::grabWidget(), QPixmap::grabWindow()
calls.
- Use QTest::qWaitForWindowShown() instead of
qt_x11_wait_for_window_manager().
- Rewrite some platform-specific code using QPA interfaces.
Change-Id: I29ce4c4f3e5c05edddfd018dc2eabdd77738eb23
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
WA_PaintOutsidePaintEvent is only suggested to be used when porting Qt3 code
to Qt 4 under X11 platform. and it has been broken now.
Change-Id: Ie4297b2a449f1055ca10ada9efb930e6018b1efb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Focus change happen as: FocusAboutToChange event -> focus change
-> FocusOut event -> FocusIn event.
Input method need to have focus when calling commit(). Notification
on focus about to be lost allows QWindow implementations to commit in
time.
Also changes QWidget documentation to match code reality.
Change-Id: I17a8a374a33dd700909f79e370b42348869261a6
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Change-Id: Id565fa1eb8fe13c62a93a5afa39a5701ce7b20ea
QPixmap::grabWidget is deprecated, which calls QWidget::grab() at present.
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This event was completely unused.
In addition it leads to crashes on linux when
sending the Destroy accessibility update.
The Destroy event on linux would still query an accessible interface.
That in turn would trigger the event to be sent.
Change-Id: I8915527de067b8b70ba41b1361e3ef5d12866d7d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
QInputMethod better describes what the class is about, input methods
in general, be they panels or just composing input from key events.
Compatability headers added for old name. Not bulletproof but should be
enough to get transition done.
Change-Id: Iefde6e7ccb1ec4a3b226cef3469089e751c60fc1
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Moving away from deprecated QInputPanel inputItem.
Small behavioral changes:
- On focus proxy widgets, disabling WA_InputMethodEnabled on
proxy will no longer disable input method for proxy target.
- setEnabled(false) on proxy widget will no longer disable
input method for target as a special case.
Change-Id: Ifb5b7144d29bd3aefdde7cf4a0bd396db06e67e2
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
tst_qwidget.cpp will not build/link without tst_qwidget_mac_helpers.mm,
so re-add it to the build as well.
Change-Id: I55130f62c215c4b82683d90456e31fdb09f833a8
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This will return the NSWindow* for the given QWindow*. Port the QWidget
autotest helper to use the native interface and the "nswindow" resource.
Change-Id: I754b7e9288690ac3c99c3ec65c5526d5fe121234
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Qt is Cocoa only now, and does not use HIView anymore, making this test
is meaningless. The testAndRelease() and createAndRetain() helper
functions are also no longer needed.
Change-Id: I26180a4670c8e7445741d3aab510c4da7b65388c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was already disabled when first committed in January
2009.
Change-Id: I00a82f2e673fee76869cc76d756c36d081da2d2a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove some "#if 1" directives and a line of debug code.
Change-Id: Ib34f5b65470a24ee499799525ffe0645ccc117fe
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There are two cases where a QCOMPARE may fail on some platforms. Rather
than disabling the QCOMPAREs with "#if 0", use QEXPECT_FAIL so that we
can look in the CI logs to see which platforms fail.
Change-Id: Ife93c8032e01a04e8068bf213e2040778c12f711
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Compile without -qpa.
- Make Q_WS_QPA-#ifdefed sections the default in the code
- Replace some Q_WS_ by Q_OS_
- Add ### fixme for places that need checking
- Remove qpa conditionals from .pro files.
Change-Id: I6ea930afc0c236cc12a7b7e95f1b8a1c24b3a513
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I3c1d993d5682db913aadc267d98a638061f393d6
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
