On Windows Xp we can not connect to the pseudo interfaces used for
Teredo, so do not add these to the tests.
Change-Id: I4e20c880fa2d18f266ffcef2f640d8b2e6d0cd21
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Do not try to connect to the Terdo Tunneling Pseudo-Interface as
this will fail for Windows Xp.
Change-Id: I6dcd8369ba1e8642224cd4ac53f4032ed46d050d
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Make test projects declare TEST_HELPER_INSTALLS rather than calling a
function exported by testcase.prf. load(testcase) may be unsafe, as
testcase.prf should be processed after default_post.prf.
Fixes silent disabling of various autotests.
Change-Id: I56b35ffd653a637ad5ab18d64dd1a1edadfac59f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
When we do not have dual stack the listen on QHostAddress::Any will
result in a serverAddress that is AnyIPv4.
Change-Id: I3c2c21c9412cd46a57e3ed7ce1c1bd2ef42d4bd9
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
On windows without ssl there was a disconnect on sslError signal
that was not wrapped in ifdef.
Change-Id: I9b1327adfa853d4dc8f1d8a0120f8f0ed7c13e9e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The reqExp used to handle wildcards in the path was broken. So we
always searched the working directory and not the specified path.
Autotest where passing because of a hack used for Windows paths
where we removed the first two chars in the path string.
This fix will not use nativeSeparators thus removing the Windows hack
and fix the regExp to match wildcard chars.
Task-number: QTBUG-23573
Change-Id: I56fadbb67f25b8ce9c0f17cb6232e0bdb9148b1c
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test had been XFAILing since August 2011, but recently started to
XPASS, possibly due to changes in the SSL setup on the tested host
(qt.nokia.com).
Removed QEXPECT_FAIL and replaced qt.nokia.com with
codereview.qt-project.org as a host expected to have working SSL. (If
SSL on the latter were broken, it would immediately be detected by
any attempts at git over HTTPS.)
SSL setup can be verified as working by:
openssl s_client -CApath /etc/ssl/certs \
-connect codereview.qt-project.org:443 </dev/null
Task-number: QTBUG-20983
Change-Id: I9b4146da6545ab4115d6308044b1d242dd52b7f9
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Tests against the test data from the IETF working group
https://github.com/abarth/http-state
The test data is in the parser.json file, imported from that repository
and with one patch applied to make the ordering0001 test case data match
the raw files which are used by their python test server.
Task-number: QTBUG-18920
Change-Id: I17c1a8d92aef2850907f009667c6574e4c8d0cdb
Reviewed-by: Richard J. Moore <rich@kde.org>
Url encoding of paths is no longer used. This matches the
current release behaviour of Firefox, Chrome and MSIE browsers.
RFC6265 does not allow this type of encoding.
This fixes remaining path test cases in the IETF test suite.
Currently the path0027 test is passed by Firefox but failed by
Chrome and MSIE, so there is a potential compatibility issue.
However it is a corner case with a malformed cookie.
Task-number: QTBUG-15794
Change-Id: I9b02bb5adc32d614f512d314d06f2c60894aa2b0
Reviewed-by: Richard J. Moore <rich@kde.org>
The ';' separator takes priority even inside a quoted string.
Quotation marks have no special meaning, they are not parsed and
regenerated anymore. This means it is not possible to include
the ';' character inside a cookie value.
Other characters are returned transparently, including [",\]
Task-number: QTBUG-15794
Task-number: QTBUG-26002
Task-number: QTBUG-11641
Change-Id: I4eefef5c6ac7753d5a21c226169e264578521fe9
Reviewed-by: Richard J. Moore <rich@kde.org>
Two cookies in a single Set-Cookie header are no longer allowed.
Check that this header is parsed according to RFC6265 rules instead
Change-Id: Ice48bbe78a9886208f7d1186cf1d8c37f46f1252
Reviewed-by: Richard J. Moore <rich@kde.org>
Cookies cannot be separated by commas anymore, but are separated by
new lines.
See "Remove support for multiple cookies in one Set-Cookie header to
follow RFC6265."
Reviewed-by: Martin Petersson
Task-number: QTBUG-21456
(cherry-picked from 5d809703aa2d2a08ae7e9610fd42025b081d3d0c)
Change-Id: If7d1b4e58399a5d678495af6ff280409ba220e86
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This also allows cookie values to contain commas to increase compatibility like
most popular browsers do even though the RFC still reserves them for future uses.
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Task-number: QTBUG-21456
(cherry-picked from 8ba781b01e900148fec2e9d26485369b3295487f)
Change-Id: Ib09ab2411dddf7f99de1c0c31680428b7412fc7e
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Server responses may arrive in more than one packet, though this
is rare due to nagle algorithm.
Also fixed IPv6 addresses being discarded from server responses,
which was caught by the new autotest.
Task-number: QTBUG-18564
Change-Id: I32d9e2978037fb3e1fff27b7e618b5da6d222f28
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The existing autotest was made invalid by the downloadProgress
signal choking patch.
Rewrote the autotest to download files from the test server
with some rate limiting applied to ensure more than one signal
is emitted.
Change-Id: I6026bacdf356b4e1796b80f6983e5bdce0d1bfce
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The QNetworkReply::uploadProgress signal is intended for updating UI
elements such as a progress bar.
Limit the signal emissions to 10 per second to prevent overloading
the UI with updates.
As with the downloadProgress choke, this is implemented by dropping
signals that occur within 100ms of the previous emission.
The 100% signal is always emitted (bytesSent == bytesTotal)
When the upload size is initially unknown, this behaviour is still
provided by the upload device emitting a suitable readProgress
signal when EOF is reached.
Task-number: QTBUG-20449
Change-Id: I77e03c8a49109106e1c375ee00380293fd326b63
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
gitorious.org's IP no longer resolves back to gitorious.org.
This fix is temporary, again.
Change-Id: I85b5fe1c5e603d23dd3226b843ef42165d4c417b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
qdatetime.h uses std::min/max and on Windows windows.h (or some subsequent
header file) may under certain circumstances define min/max as macros.
The easiest way to prevent the windows header files from doing that is to
define NOMINMAX in the place right before windows.h is included. The other
way is to define min and max to min/max themselves to prevent windows.h
from doing its evil thing.
If a user of Qt (WebKit in this case) chooses the approach of defining
min/max to themselves and then includes qdatetime.h, then a subsequent
inclusion of windows.h doesn't work because qdatetime.h undefines min/max.
We should not enforce the type of workaround needed, therefore this patch
removes the workaround from qdatetime.h and requires user code that
happens to include windows header files before qdatetime.h (seldom case)
to choose either workaround.
Change-Id: I7347eec7369491a065e894cff557004e069453d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use a unique QTemporaryDir instead of a fixed path for the test cache.
Change-Id: Ib664033a509a6cefd7c323708f80ef595b202178
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Use a QTemporaryDir for a unique test cache directory for each process,
rather than a fixed path.
Change-Id: I64df8422d01282bbc108e942947c1b55368bd941
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
We'd like to decrease the default timeout for tests in the Qt Project CI
so that we waste less time waiting for hanging tests.
Tests which genuinely take a long time to run, such as these, should
have their timeout explicitly set in their .pro file.
Change-Id: I4fe6249e9efa764b230251d73a1115c24411e168
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Ensure we always use a unique filename when writing to test files.
The test already contained code for this, but it was not applied in a
couple of places.
Change-Id: I1e29ee162c390e014688ab46e3658e2a463d203e
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Single signon code path gets the NTLM responses from the system,
so we can't predict the contents.
Task-number: QTBUG-25851
Change-Id: Ia8aa1741ae5af9e48643331bf9a3768550a30166
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Change-Id: I5039e011f3c9b44ed1887424f11e4e146c3eb07f
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
In tests when IPv6 is not present QSKIP IPv6 tests.
Task-number: QTBUG-23660
Change-Id: I02abc7322d765a93cbf661e53c76257f03dca73e
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
A couple of people reviewing the toText() method (which is new in 5.0)
have said that since the string returned is human readable it should
be a QString not a QByteArray. This change follows their advice.
Change-Id: Ibade9a24870805f7fbe2d299abeb9c6e964f0cf4
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This can be enabled again now. The sender transfer test is still not
re-enabled since the test would take to long to run if sending
enough data to overwhelm the reciever's kernel buffers.
Change-Id: I4056fdca53ec8ebbcc53dfdc814d8bfdbc73f7ce
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
The socket engines already implemented this, but it is a good idea
to test it explicitly.
Task-number: QTBUG-25634
Change-Id: Ife3fe09b0119ed435e4055523c553847739a09fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the scope ID is not set, Mac and Windows will not transmit
packets to link local addresses. This patch implements setting
the scope in the native socket engines and adds a test case.
(it was partially implemented already, though UDP specific code
paths were missed in the unix engine)
Task-number: QTBUG-25634
Change-Id: I23300bdc9856e38458078e913daaa59cd05a74b5
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
After we have change the policy we should set the readbuffersize to
unlimited again, so that we try to download all data.
Change-Id: I1b9bdb6c2e5f408c920f6e6d7e85a39e4c18316b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Because SSL2 is disabled in ubuntu's openssl binaries, the SSL
connection is expected to succeed rather than fail when the server
side is using SSL3/TLS1.0.
Used the OPENSSL_NO_SSL2 macro to decide this.
Change-Id: I2c35aa5aa0c9432ae78000c81f70086bdc31843d
Reviewed-by: Richard J. Moore <rich@kde.org>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I94cc301ea75cc689bcb6e2d417120cf14e36808d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Although we created an enum for pause modes to make 5.x binary
compatible with 5.0, the enum value is not well named.
In 5.1, we propose to add PauseOnProxyAuthentication to the enum.
PauseOnNotify is not clear what it means, while PauseOnSslErrors is.
Any new notification in a minor release would need a new enum value
otherwise applications would get pauses they did not expect.
Task-number: QTBUG-19032
Change-Id: I4dbb7467663b37ca7f0551d24a31bc013968bedc
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
If we're not going to verify the peer, or we know in advance that
windows won't have a CA root then don't ask it to verify the
certificate chain.
The test case started failing in CI when the windows cert fetcher
was integrated due to timing change. I've relaxed the timing
requirement of the test to avoid it being unstable.
Task-number: QTBUG-24827
Change-Id: I694f193f7d96962667f00aa01b9483b326e3e054
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The mentioned records for råkat.se cannot be resolved.
Note these were marked with a FIXME in the first place.
Change-Id: I4ea3bbb0aec8ca1b3487c44656b48a8715228886
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
These tests have been passing consistently since they started running
on Windows in CI.
Change-Id: I4505497afc477a7f4fbda0acc29987d0d0cf220a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test has been passing consistently since starting to run in CI.
Task-number: QTBUG-25445
Change-Id: Id024921b18ea4ef94ad2f47d9db2ccda3212eaaa
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The test has a single stable failure on both of these platforms. Mark
the failure with QEXPECT_FAIL (that was already the case on Ubuntu
11.10) and re-enable the test.
Note also the elimination of duplicate bug numbers.
Task-number: QTBUG-24234
Change-Id: Ica11e7d1f3cd9487647127984fef7c75e0e764fe
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
And use QString::toUtf8() to recover the byte array original.
Change-Id: Ic94de12e7ac67479e85a64a86f8467428b4d22ba
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It no longer requires hardcoded configuration, and it passes on
linux, mac 10.6 and windows desktops
Change-Id: Ibaa63520dade58ce13c23cf2aba3ddbc5be1c472
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QLatin1Literal is just a typedef of QLatin1String.
Change-Id: If20ca225e57a7fb45a7775f0fc81aedb6da88c96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Switch on most of the tests (all but the bearer tests), marking the two
known failures as insignificant tests.
Change-Id: I17f228a938de1a23eddf897f494bfa4e54338dae
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Calling peek() for qsslsocket caused socket data to be copied into
qiodevices buffer and therefore make it unaccessible in qsslsocket.
Cherry picked form 4.8-branch & modified to Qt5 API changes
(int -> qintptr)
Original commits:
commit 621f18955082fc73471e75d1f8c35c2dcd4befeb
Author: Shane Kearns <ext-shane.2.kearns@nokia.com>
commit 68b1d5c17aa38d5921bdade2b0e0cb67c6c90513
Author: Kalle Viironen <kalle.viironen@digia.com>
Task-number: QTBUG-18498
Change-Id: I6be4b19baec2f3197537f5e7b61432040ec84ad2
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
