Fix binary_for_strip project not being found when the following
conditions were met:
- building a repo other than qtbase
- qtbase sources are not available on the machine
(usually happens in CI where only the current repo sources are
available).
The issue was that QT_CMAKE_DIR would always be defined, regardless of
which repo was being built and the system would incorrectly assume
the location of the project files.
The fix is to always pick up the sources from qtbase's source dir if
they are available (this time done with an appropriate check),
otherwise use the installed files.
Note that the behavior of always using the qtbase sources if available
is not exactly the best, but it is a more general issue that affects
other code too.
In the name of consistency, make it so for the binary_for_strip
project as well, but add TODOs in code to address the situation
in a separate change.
Amends 39f657032b
Pick-to: 6.2 6.3
Fixes: QTBUG-102064
Task-number: QTBUG-88090
Task-number: QTBUG-101653
Change-Id: I0649f945e9ff0ab1f597c51bb5ab389fa665c021
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Using INSTALL_LIBDIR is the only reliable way to get the library install directory.
Amends: d1c56073b4
Pick-to: 6.2 6.3
Change-Id: Ib8c4fb8b4d339c63209393d7fdb3d1c3425b03a4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CROSSCOMPILING_EMULATOR is a target property, not a test property.
Fixes: QTBUG-87864
Pick-to: 6.2 6.3
Change-Id: Icb07e9ed71a6bcbfceb7aa2116bf56eaa0a545c6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This option completely ruins the output when running test, as it logs
every single safe heap operation. I don't think this detailed logging
is necessary or reasonable in a normal debug build.
Pick-to: 6.3
Change-Id: I4bb740299d631d21453f9b4a8959634801fb3a1e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
MinGW 11.2.0 comes with a strip.exe that strips the ".gnu_debuglink"
section in binaries, a section that is needed for the separate debug
information feature.
binutils version 2.34 mentions the feature for the first time:
https://sourceware.org/binutils/docs-2.34/binutils/strip.html#strip
To ensure the debuglink section is preserved, generate a shell wrapper
that calls the original strip binary with an extra option to keep the
required section.
To determine if the option is supported, we build a real shared library
on which strip will be called with the --keep-section option.
If the option is not supported, a wrapper is not generated and the
stock strip binary is used.
This logic only applies when targeting Linux and MinGW + a shared
library Qt. For other targets, the stock strip binary is used.
Developers can opt out of this logic by passing
-DQT_NO_STRIP_WRAPPER=TRUE when configuring each Qt repo.
Pick-to: 6.2 6.3
Fixes: QTBUG-101653
Change-Id: Idd213d48d087d3c9600c853362aebaba348cde33
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
So we can see the exact moc invocations when debugging issues in the
CI.
For ExternalProject examples, it is conditional on whether Qt is
configured with QT_INTERNAL_VERBOSE_EXAMPLES set to ON, otherwise
calling the main ninja without -v will end up cluttering the output
with AUTOGEN output.
Pick-to: 6.2 6.3
Change-Id: I6468ab0e461b3be283e2428e3515cae4d5986242
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Since e2a0ddbb69 , if Qt is configured
as a non-developer-build, some of the CMake tests that include QtSetup
would have their CMAKE_MESSAGE_LOG_LEVEL set to the reduced NOTICE
value.
Make sure that tests always have a DEBUG level, so that if they fail
in the CI, we have more info on what goes wrong.
For ExternalProject examples, it is conditional on whether Qt is
configured with QT_INTERNAL_VERBOSE_EXAMPLES set to ON, otherwise
calling the main ninja without -v will end up cluttering the
output a non default log level.
Amends e2a0ddbb69
Pick-to: 6.2 6.3
Change-Id: Icd3b6e0fcc6c73e4b53b6c4a6d8354c96077a050
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
when configuring for the first time.
Also mention how to increase output verbosity.
Unfortunately there is no way to check what is the current log
verbosity to only show the latter message conditionally.
Setting --log-level does not assign the same value to
CMAKE_MESSAGE_LOG_LEVEL.
Amends e2a0ddbb69
Pick-to: 6.2 6.3
Change-Id: I22101b9dc7c407cc54aa5e7964dec50c7490f8f5
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Network autotests cannot connect to services on docker containers from
QNX qemu without all ports explicitly defined (both host and container)
side.
Pick-to: 6.2 6.3
Task-number: QTQAINFRA-4684
Change-Id: Iba44cfa17d42d43ecec3e29985e404f75d5fc232
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
QtCopyFileIfDifferent needs to be both installed and copied to a build
folder as a public CMake helper. Otherwise it's not found when building
tests inside the Qt build tree.
Pick-to: 6.2 6.3
Fixes: QTBUG-101916
Change-Id: I8d081e594fe694f528ebac4c13bbdf6d3b8402b9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some autotest CMakeLists.txts need to know whether the target is webOS.
This change enables that.
Task-number: QTBUG-101933
Pick-to: 6.3
Change-Id: I7b4ebe89622a4ad8bc313e807d9fa50152c96d14
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add common function that unifies the check for the DEPFILE support.
Update the check according to the recent CMake version.
Task-number: QTBUG-99354
Change-Id: Ia2abf46fe3a9a3d17ea7a37eaf6c9c6a697c5b84
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When CMake generates compilation rules, it extracts the values from
INTERFACE_INCLUDE_DIRECTORIES and checks if any of the values
are framework paths.
If they are, instead of adding an -I ./lib/My.framework to the
compilation rules, it adds -iframework ./lib or -F ./lib.
The same transformation does not happen when AUTOMOC passes include
paths to moc, nor during a headersclean check. The values there
are passed verbatim, with an -I prepended.
This causes issues when the include file name is the same as the
framework name.
E.g. #include <QtQml> + -I ./lib/QtQml.framework because moc
then ends up silently including the shared library
./lib/QtQml.framework/QtQml
instead of the header
./lib/QtQml.framework/Headers/QtQml
This can lead to a variety of silent issues during moc generation,
because all the definitions of QtQml will be missing.
Unfortunately, there does not seem to be a clean way to fix this in
the build system due to CMake semantics.
See https://gitlab.kitware.com/cmake/cmake/-/issues/23337 for details.
We can mitigate the issue by ensuring that
-I ./lib/QtQml.framework/Headers
comes before
-I ./lib/QtQml.framework
by manipulating the order of values in INTERFACE_INCLUDE_DIRECTORIES.
We might want to consider implementing an additional mitigation in
AUTOMOC, so that it filters out include paths like
-I ./lib/QtQml.framework, thus ensuring that a newer CMake version
will not exhibit the same issue when used with an older Qt.
We could consider doing the same in moc. The advantage of doing it
in moc is that that moc will consider fewer invalid include paths
when searching for headers.
Amends 4b2de41b13
Amends d7efb2a419
Pick-to: 6.2 6.3
Fixes: QTBUG-89545
Fixes: QTBUG-101718
Fixes: QTBUG-101775
Change-Id: Ib2c25b5744bd2b5c9c83813bb04ad88c0179f6ec
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When building Qt we should have warnings of any internal use
of deprecated API, so set it to Qt7.
Also added comments to clarify what the macros do.
Change-Id: Ib47278fed9ab1ec4411ed9f69a9a9c0f811db02d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Conditions with the LINK_LANGUAGE genex are not parsed correctly when
generating .pc file. So link options will be added unconditionally.
Amends d1e02c3855
Pick-to: 6.2 6.3
Fixes: QTBUG-101723
Change-Id: Ib837b3f3429d195a469450ef25af9630ad7d15e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use VERBATIM option to prepare the correct command line for the
add_custom_command. This especially sensitive when using build
directories with names containing special symbols, that cannot be
handled by shell correctly.
Change-Id: I51d7041cb806411135fd59bf6273c04a3c695443
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We shouldn't set CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to BOTH when
cross-building examples without ExternalProjects.
Instead append the $build_tree_prefix to CMAKE_FIND_ROOT_PATH
and $build_tree_prefix/lib/cmake to QT_EXAMPLES_CMAKE_PREFIX_PATH
to circumvent the usual CMake path-rerooting issue.
This ensures that the build-tree Config files are found by the in-tree
find_package calls when cross-building examples.
Pick-to: 6.2 6.3
Task-number: QTBUG-96232
Change-Id: I4e31f0bf3dbfeb4339823fe09addda3ae83f12c3
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
For examples to successfully find not yet installed Config files in a
prefix cross-build, both CMAKE_FIND_ROOT_PATH and CMAKE_PREFIX_PATH
need to be adjusted when toolchain files set
CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to ONLY.
Before this change, we lacked two things.
1) If the chain-loaded toolchain file sets CMAKE_FIND_ROOT_PATH
(instead of appending), then the initial value of CMAKE_FIND_ROOT_PATH
that was passed by ExternalProject's initial cache would be
overridden.
2) The prefixes we passed via QT_EXAMPLES_CMAKE_PREFIX_PATH did not
end in lib/cmake, to work around the path re-rooting problem in CMake.
We can handle both of these points by using
QT_ADDITIONAL_PACKAGES_PREFIX_PATH which was introduced for Conan
usage.
Each value assigned to QT_ADDITIONAL_PACKAGES_PREFIX_PATH
gets prepended to CMAKE_FIND_ROOT_PATH by qt.toolchain.cmake AFTER the
original toolchain file is chain-loaded.
And each value also gets lib/cmake appended and assigned to
both CMAKE_PREFIX_PATH and _qt_additional_packages_prefix_paths (used
by Qt6Config.cmake.in to work with find_package + NO_DEFAULT_PATH).
This is exactly what we need to ensure examples build.
Pick-to: 6.2 6.3
Task-number: QTBUG-96232
Change-Id: I11a52457ff795a6661a3a7b68e823e0615d0ce89
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This introduces a new helper function,
qt_internal_add_repo_local_defines and makes use of it in
qt_internal_add_{module,test,executable,benchmark,plugin}. That function
checks whether QT_EXTRA_INTERNAL_TARGET_DEFINES is set. If it is, the
defines listed in there will be aded to all targets passed to the
functions mentioned above.
The intended usage is that QT_EXTRA_INTERNAL_TARGET_DEFINES gets set
in the repository local .cmake.conf. This allows e.g. opting in to
source incompatible changes in leaf modules (as long as those are
guarded by some define).
Pick-to: 6.2 6.3
Fixes: QTBUG-101640
Change-Id: I06c3693ee69f46e95a48de724621f0c97e7cc3a8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
ANDROID_NATIVE_API_LEVEL is an alias for ANDROID_PLATFORM and the
Android's CMake docs [1] uses directly ANDROID_PLATFORM so let's use
that as well. Also, NDK r23b seems to have removed the part of code from
android.toolchain.cmake that handles ANDROID_NATIVE_API_LEVEL to set
the correct value to ANDROID_PLATFORM.
With this change, CMake will pass the value from the configure argument
-android-ndk-platform as -DANDROID_PLATFORM instead of
-DANDROID_NATIVE_API_LEVEL. Otherwise, if if -DANDROID_NATIVE_API_LEVEL
is passed directly to CMake, it should work as before.
[1] https://developer.android.com/ndk/guides/cmake#build-command
Pick-to: 6.3
Task-number: QTQAINFRA-4837
Change-Id: I5c21af53ac91e11a27c4b033313d22d1115c1abc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It broke drive-less (no C:\ prefix) paths passed to configure.
Invoking configure on Windows with the following args
qtbase/configure --
-DCMAKE_INSTALL_PREFIX=\Users\qt\work\install
called CMake with
-DCMAKE_INSTALL_PREFIX=\\Users\\qt\\work\\install
saying
Qt will be installed into '//Users/qt/work/install'
and while the build succeeded, installation would fail with
CMake Error at cmake_install.cmake:41 (file):
file cannot create directory:
//Users/qt/work/install/lib/cmake/Qt6BuildInternals. Maybe need
administrative privileges.
Note the double slash in the beginning is likely interpreted as a
Windows share URI / UNC path.
The same would happen when passing -prefix '\Users\qt\work\install'
As a reminder, we want to support drive-less prefix paths because
that's what Qt's Coin CI uses passes to ensure DESTDIR installation
works correctly.
Amends cb7f4030bc
Pick-to: 6.2 6.3
Fixes: QTBUG-94366
Change-Id: I9267b6f784babfbdaeafc65267ba96c75fa24112
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The -mno-direct-extern-access tells the compiler and linker that
references to symbols outside this ELF module mustn't be direct and must
instead always go through the GOT or PLT (the PLT can additionally be
disabled with -fno-plt). The ELF protected visibility tells the compiler
and linker that this symbol is present in the dynamic symbol table as an
export, but it cannot be interposed by another ELF module.
This option is required for user code to link properly to Qt, otherwise
they will get linker errors (assuming GNU binutils >= 2.39) or runtime
failures (glibc >= 2.35). Both versions of glibc and binutils are older
than GCC 12, so it's a safe assumption they are in use and downgrading
the toolchain or libc is not supported. Adding this option to the
compilation is assured for CMake and qmake-based projects.
For example, all accessess to QCoreApplication::self in QtCore, after
this change and with GCC 12 are relocation-free and direct:
000000000013ebf0 <QCoreApplicationPrivate::checkInstance(char const*)>:
13ebf0: cmpq $0x0,0x4f73d0(%rip) # 635fc8 <QCoreApplication::self>
13ebf8: setne %al
13ebfb: je a90fe <QCoreApplicationPrivate::checkInstance(char const*) [clone .cold]>
13ec01: ret
Meanwhile, accesses to the same variable in other modules are indirect
via the GOT:
66650: mov 0x876e1(%rip),%rax # edd38 <QCoreApplication::self@Qt_6>
66657: cmpq $0x0,(%rax)
This replaces the -Bsymbolic and -Bsymbolic-functions (broken)
functionality that Qt has been using or attempting to use since ~2006.
See https://gitlab.com/x86-psABIs/x86-64-ABI/-/issues/8#note_606975128
Change-Id: Iad4b0a3e5c06570b9f5f571b26ed564aa0811e47
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We have VAES code in qhash.cpp that isn't getting compiled right now.
Change-Id: Ibf4acec0f166495998f7fffd16d6961261dec361
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This is useful for Qt for Android builds, where we want to build Qt on
a single host, but make the Qt installation usable on any host
(Windows, Linux, macOS).
There are only two flavors of shell scripts, unix ones that use sh and
Windows batch files.
If Qt is configured with
-DQT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS=ON
then we generate both of them regardless of the current host platform.
Note that the target_qt.conf file still needs to be patched to specify
a correct HostSpec value so that qmake operates correctly.
Other target_qt.conf values might also need path adjustments depending
on use case (like HostPrefix and HostData).
Pick-to: 6.2 6.3
Task-number: QTBUG-101357
Change-Id: Ic86caaa8b318467528cc82dc7fbfecde998cdb71
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Only show the more verbose configure output when configuring
with -developer-build (which matches --log-level=STATUS)
Otherwise in a non-developer build, restrict the output
to NOTICE+ message (includes WARNINGs and ERRORs).
Developers can still pass a custom log level when configuring.
For example -DCMAKE_MESSAGE_LOG_LEVEL=STATUS or
--log-level=STATUS.
The former method will be cached, while the latter is only applied
to the current configure invocation.
Also show the build instructions hint message only when configuring
for the first time.
[ChangeLog][CMake][configure] The configure output verbosity of
non developer-builds of Qt is now reduced by default. Pass
"-- --log-level=STATUS" to configure to make it verbose again.
Pick-to: 6.2 6.3
Change-Id: I7583a9c92142e0b1d7c5411b06403f40d8ebaf20
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This works on iOS and Android, and Windows with touchscreen.
On Android, we need to listen to the input event
of a hidden text element and synthesize Qt keyboard
events from that in order to get input events into Qt.
On Windows, we need to be more creative about bringing the native
virtual keyboard up.
Because the entire canvas is contenteditable, we need to specify the
inputmode is set to 'none', otherwise the v keyboard pops up
when user clicks anywhere on the canvas. Therefore we set a hidden
element as contenteditable, which pops up keyboard when Qt
needs it for editable widgets. On Android, this is the same
element that is used to proxy the keyboard input.
[ChangeLog][wasm] Add support for native mobile keyboard
Done-with: Morten Johan Sørvig <morten.sorvig@qt.io>
Fixes: QTBUG-83064
Fixes: QTBUG-88803
Change-Id: I769fe344fc10c17971bd1c0a603501040fe82653
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
_qt_internal_android_executable_finalizer wraps Android-related
function that are needed to created an Android package.
The function is added to the INTERFACE_QT_EXECUTABLE_FINALIZERS
property in Qt Core so it's called implicitly for user projects.
Pick-to: 6.3
Change-Id: I140f53341691dcfdc6ae2ddea520818cf2834eb6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
And the target ZSTD::ZSTD to WrapZSTD::WrapZSTD.
This should allow building Qt with the
-DCMAKE_FIND_PACKAGE_PREFER_CONFIG=ON set.
Pick-to: 6.2 6.3
Fixes: QTBUG-100537
Change-Id: I748601e4ad6f518323bf1034d6fc1de582c815e1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
After the update to the CMake based build system the ability to
generate pkgconfig files, like it was with QMake, was lost.
This patch adds pkgconfig generation again via a new internal command
named qt_internal_export_pkg_config_file.
The functionality of this command consists in checking if the target
is internal. Then gets the compile definitions. It performs a search
for dependencies that is somewhat similar to
qt_get_direct_module_dependencies, although it won't recurse down for
more deps. Each dependency is then again, checked if it's internal or
has a public interface. Later these deps get deduplicated and lastly
a pkgconfig file is filled.
The resulting pkgconfig files of many of the Qt6 packages were
validated via invocations of `pkg-config --validate` and
`pkg-config --simulate` commands and later used to build local
projects plus tests that use the pkg-config provided details at
compilation time.
Although it has some limitations, with qt_internal_add_qml_module if
it specifies non-public deps these won't be listed and with non-Qt
requirements, notably in static builds, not being appended to the
PkgConfig file.
Task-number: QTBUG-86080
Change-Id: I0690bb3ca729eec328500f227261db9b7e7628f6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce a new -no-prefix option that can be used to build Qt without
having to install it.
Currently, -no-prefix is already implied by -developer-build, but
-developer-build also implies -warnings-are-errors and
-feature-private-tests, which not everyone might want to use.
Some Qt builders likely use -developer-build for the no-prefix
behavior, hence we introduce a standalone -no-prefix option to offer
a nicer user experience without -Werror and friends.
Previously it was possible to achieve the same by specifying
-prefix $PWD, but that relies on $PWD expanding property in the used
shell.
The new -no-prefix doesn't depend on the type of the shell and
is shorter to type.
Internally this gets passed by configure as -DINPUT_no_prefix=yes to
CMake, and transformed into a -DQT_FEATURE_no_prefix=ON feature.
The feature also gets automatically auto-detected to ON if
developer-build is set, -prefix is either unset or $PWD.
CMake code should still query QT_WILL_INSTALL to decide whether
files need to be installed or not.
As a drive-by, we now also export QT_FEATURE_developer_build to
be available for querying during configuration of other repos
(previously it was only possible to query FEATURE_developer_build).
Pick-to: 6.2 6.3
Change-Id: Iaa6c8d8ae2b736282e9949d2a5d7f412e290a253
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
For cross-compiled conan packages we need conan to export QT_HOST_PATH
as an environment variable. The Qt build now picks up this environment
variable if no QT_HOST_PATH cache variable was specified.
Pick-to: 6.2 6.3
Change-Id: I0c3e15e82842061d5db81949ffcc1c240f6ed6a4
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
All variables that are used in qt.toolchain.cmake should be recorded in
__qt_toolchain_used_variables. This is mostly done for consistency and
to avoid surprises in future configure checks.
Pick-to: 6.2 6.3
Change-Id: I1ae18c5dfe9677c5f46a102e434e32187cb0d703
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Except on Windows, the values in CMake environment variables that
contain path lists are separated by colons, not semicolons. See
documentation of CMAKE_PREFIX_PATH.
This is necessary for conan's virtualenv generator which sets these
environment variables with native list separators.
This amends commit e044c94a61.
Pick-to: 6.2 6.3
Task-number: QTBUG-94524
Change-Id: I7f3d140a8462347b181f1d9601fd11cc1ba449db
Reviewed-by: Iikka Eklund <iikka.eklund@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When configuring a static Qt with the -qt-zlib option and the build
system creates a 3rd party header module QtZlib, syncqt
does not generate a QtZlib header file that would include all its
public headers.
Then when the QtSvgDepends header is generated, it would add an
#include <QtZlib> which would break compilation of the QtSvg PCH
file (which compiles QtSvgDepends).
We have logic to exclude addition of headers from regular 3rd party
static libraries, but not header only 3rd party libraries.
Adjust the code to handle header-only 3rd party libraries, as well as
make sure it works across repos by exporting the relevant properties.
As a drive-by, also rename and export some other informational
properties.
Amends af00402d64
Amends 6fdeaea24f
Amends be2745e478
Pick-to: 6.2 6.3
Change-Id: I087f50b193dd845e4a5ec906e8851d63122faf80
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Both INITIAL_MEMORY and PTHREAD_POOL_SIZE are settings users can
change, they are not interface settings.
Fixes: QTBUG-100693
Pick-to: 6.3 6.2
Change-Id: Ie1547c7f52c9fe109a313260616705728024b6b8
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: David Skoland <david.skoland@qt.io>
Add the possibility to install a Qt app into a directory different from
${INSTALL_BINDIR}.
If INSTALL_DIR is not specified, qt_internal_add_app still installs to
${INSTALL_BINDIR}.
Pick-to: 6.2 6.3
Task-number: QTBUG-99295
Task-number: QTBUG-100047
Change-Id: I52371aa0f770d80c32bb0b3442ce3c463916be63
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
unused parameters in cmake tests cause the tests to fail when the
project is configured with `-Werror,-Wunused-parameter`
Change-Id: If3065d008753a7718282dfc6ba0d79d46576cb34
Pick-to: 6.2 6.3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
For static builds we need 3rdparty headers to be installed.
Leaf modules like qtwebengine needs 3rdparty libs and header for
zlib, freetype, harfbuzz, png, jpeg. Without those the Chromium bundled
versions are used, however it might end up badly if qt has already
bundled one.
Introduce new header only modules with additional arguments for
qt_internal_add_module:
* EXTERNAL_HEADERS to pick exactly which headers are public
* EXTERNAL_HEADERS_DIR to include whole directory preserving the
files directory structure
Fix qtsync so it keep directory structure for all non-qt modules when
syncing headers and do not generate warnings for headers files.
Task-number: QTBUG-87154
Task-number: QTBUG-88614
Change-Id: If1c27bf8608791cd4e0a21839d6316a445a96e9f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
If there's no qt.toolchain.cmake used, QT_HOST_PATH_CMAKE_DIR is not
set. Use the location calculated from the Qt6HostInfo package in that
case.
This amends commit e044c94a61.
Pick-to: 6.2 6.3
Change-Id: I99aed8e920b8c1aa6efd8f18301cc34aca5559ca
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Bundle a default LaunchScreen.storyboard file for an iOS app and make
sure it's referenced in the generated Info.plist file.
When launching Qt examples, it ensures the app uses the whole screen
space on the device rather than just a square-ish part of it.
The storyboard file is a copy of the qmake one, which qmake adds
to the Xcode projects it generates.
A custom launch screen can be provided either by setting the
QT_IOS_LAUNCH_SCREEN variable or by setting the
QT_IOS_LAUNCH_SCREEN target property.
The value must be an absolute path to the launch screen file.
The automatic addition of the launch screen entry in the Info.plist
file can be prevented by setting the QT_NO_SET_IOS_LAUNCH_SCREEN
variable to TRUE.
The automatic bundling of the launch screen file in the application
bundle can be prevented by setting the
QT_NO_ADD_IOS_LAUNCH_SCREEN_TO_BUNDLE variable to TRUE.
The current implementation has a limitation that only one launch
screen storyboard and one iOS executable can exist within a project.
If there are multiple executables in the project, all of them will
use the launch screen that is specified last (the last
qt_add_executable call).
Because of this limitation, the API is marked as Technical Preview,
to be improved upon in the future. For now it simply serves as an
improvement to the out-of-the-box experience of iOS apps built
with CMake.
Amends 4d838dae5a
Pick-to: 6.2 6.3
Fixes: QTBUG-95837
Change-Id: I6b067d703d635122959a1ef17fcca713da694a86
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When installing conan packages we have one installation prefix per
package. When cross-building a conan package, we need to make known
those multiple host prefixes to Qt, analogous to
QT_ADDITIONAL_PACKAGES_PREFIX_PATH.
Pick-to: 6.2 6.3
Fixes: QTBUG-94524
Change-Id: I68cbede350f95266a5fd3559e9b9c214c5858eed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On the Hurd there is the standard GCC toolchain, so it is possible to
query GCC for -dumpmachine.
Change-Id: Idc8e80c0937147a8ea656bc0320a83d647278455
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
