[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the signal) is deprecated; superseded by errorOccurred()
Change-Id: I11e9c774d7c6096d1e9b37c451cf0b99188b6aad
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
http example uses QStandardPaths, on Android permissions might need to
be explicitly requested to write the downloaded file.
Task-number: QTBUG-80717
Change-Id: Icd377254ad77cac661c5ae37e9081e0463493d8b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This reverts commit 94b3dd77f2.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I0dd60cf1ae9d1bd95beeb8ad58661ca4b1fb63b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because bearer management is going away
Change-Id: I60439c1714e0350b0f2bbef6afc8d2015886135f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Because bearer management is going away
Change-Id: I64311895c347b3e63df75d10db1673bcfe54f52d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Because bearer management is going away
Change-Id: I82f2e67a052fdcdf0dde337f9f69b414681511c4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The idea is to reserve device() to return a pointer to a QInputDevice
in the future, which is in sync with QQuickPointerEvent::device()
and with QTouchEvent::device().
Change-Id: Ifda6e8aea72d5121955b31bdcbd91bf1bfa4cec4
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Qt Quarterly 31 was the last edition of Qt Quarterly to be
published exclusively as a PDF. We cannot fix the typo in the
PDF. As the content is >10 years old an in an unmaintained
archive section, remove the reference to it from this example.
Fixes: QTBUG-81972
Change-Id: I41a82487ff89dbe8ea5701c02c51e7f7c79bf73d
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
...and merge the two overloads of getDouble() in Qt6
Change-Id: I55faa2ff222b41e48889a0ef14dd00a6da691c36
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Given we feed UTF-8 data into the importer, it must be able to cope
with Unicode. Build md4c with UTF-8 support, advertise it at
usage site, and change a couple of broken decodings.
Driveby: the textedit example used the wrong codec to decode
a Markdown file. While the Markdown spec doesn't deal with encodings,
using the default one for HTML is certainly wrong. Port the loading
of both markdown and plaintext to UTF-8, as that what _saving_
via QTextDocumentWriter would use by default.
Change-Id: I51c6214cfe45ebfc5a67a7366f7866a5328366ec
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Checking for QT_CONFIG(printdialog) is not enough when printsupport is
completely disabled since then the macro will throw an error. Therefore
add an additional check 'defined(QT_PRINTSUPPORT_LIB)' before using the
QT_CONFIG macro.
Fixes: QTBUG-81626
Change-Id: Ie9898f057cdd6bf9daf4ba9135987cb6e901e7bf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
They're value types, so we should show them being used as such.
Change-Id: If9f0c366fac66306b7861f04e2f047540d444acc
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Vulkan examples, although part of the Qt GUI documentation project,
live under their own directory under /examples. Mark the correct
install path for these using the \meta command.
Fixes: QTBUG-81360
Change-Id: I0b98a19bf56d5b1953dbd90c0d5103be9041689a
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Deprecate the overloaded signals
buttonClicked/buttonPressed/buttonReleased/buttonToggled taking an int
to avoid to need to use QOverload<> when connecting the signal. The id
of a button in a button group can be easily fetched with
QButtonGroup::id().
Task-number: QTBUG-80906
Change-Id: Idaaab54bbcb25cba543fc99f305b9f4743ee3ed8
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
src/corelib/tools/qmap.cpp:1199: (qdoc) warning: Can't link to 'QMultiMap::unite()'
src/gui/kernel/qevent.cpp:949: (qdoc) warning: Unknown command '\see'
src/gui/painting/qpaintengine_raster.cpp:344: (qdoc) warning: clang found diagnostics parsing \fn Type QRasterPaintEngine::type() const
error: unknown type name 'Type'
src/gui/doc/src/qtgui.qdoc:45: (qdoc) warning: Can't link to 'Build with CMake'
examples/widgets/doc/src/gallery.qdoc:28: (qdoc) warning: Cannot find file 'widgets/gallery/gallery.pro' or 'widgets/gallery/gallery.pyproject'
src/widgets/kernel/qwidget.cpp:5950: (qdoc) warning: Can't link to 'setFilePath'
src/widgets/kernel/qshortcut.cpp:542: (qdoc) warning: No such parameter 'context' in QShortcut::QShortcut()
Change-Id: I2395af854efebef719d4762da466f69f7c5aab9e
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
I made a clazy automated check that replaced the use of QVariant::Type
by the equivalent in QMetaType.
This has been deprecated since Qt 5.0, but many uses were not yet removed.
In addition, there was some manual changes to fix the compilation errors.
Adapted the Private API of QDateTimeParser and QMimeDataPrivate
and adjust QDateTimeEdit and QSpinBox.
QVariant(QVariant::Invalid) in qstylesheet made no sense.
But note that in QVariant::save, we actually wanted to use the non-user type.
In the SQL module, many changes were actually reverted because the API
still expects QVarient::Type.
Change-Id: I98c368490e4ee465ed3a3b63bda8b8eaa50ea67e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The example created two QPropertyAnimation instances that controlled
the same property; this caused a clash for some transitions.
Remove the smoothFlipXRotation and smoothFlipYRotation animations;
they are not needed as equivalent animations are already set as
defaults for the state machine.
Fixes: QTBUG-28081
Change-Id: Ifa7a09d48cd4905df720e3327914320ed74ebae6
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The logic is now mostly handled in QGuiApplication, with QApplication
only dealing with the widget-specific palettes and interaction between
the style and the palette.
The application now picks up changes to the platform theme and will
re-resolve the current application palette appropriately. This also
works even if an explicit application palette has been set, in which
case any missing roles are filled in by the theme.
The palette can now also be reset back to the default application
palette that's fully based on the theme, by passing in the default
constructed palette (or any palette that doesn't have any roles set).
This is also correctly reflected in the Qt::AA_SetPalette attribute.
Conceptually this means QGuiApplication and QApplication follow the
same behavior as QWidget, where the palette falls back to a base or
inherited palette for roles that are not set, in this case the theme.
Behavior-wise this means that the default application palette of the
application does not have any roles set, but clients should not have
relied on this, nor does QWidget rely on that internally.
It also means that setting a palette on the application and then
getting it back again will not produce the same palette as set,
since the palette was resolved against the theme in the meantime.
This is the same behavior as for QWidget, and although it's a
behavior change it's one towards a more sane behavior, so we
accept it.
[ChangeLog] Application palettes are now resolved against the platform's
theme palette, the same way widget palettes are resolved against their
parents, and the application palette. This means the application palette
reflected through QGuiApplication::palette() may not be exactly the same
palette as set via QGuiApplication::setPalette().
Change-Id: I76b99fcd27285e564899548349aa2a5713e5965d
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The call to qRegisterMetaType() has been removed since the type
is registered as a meta type in Qt 5. Assert on the meta type id instead.
Adapt the documentation accordingly.
Fixes: QTBUG-81254
Change-Id: I0cb459d0dda7a82fc37871605ff634004af0f9f9
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The one that is a getter for the last error found. This is to disambiguate
the expression '&QAbstractSocket::error'. Introduce a new member-function
socketError as a replacement.
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Ia2e3d108657aaa7929ab0810babe2ede309740ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Also remove the example code for deprecated methods and use CBOR instead
where it makes sense.
Task-number: QTBUG-81068
Change-Id: Iffb7a4b3d7b16a1e485fc05b3ab2e2468e9e0718
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Since 072ca960f5 changed the default
of the styles example back to Norwegian Wood, it is no longer
suited as gallery example.
Extract the dialog from it and re-add it as a gallery example Add a
tooltip displaying the class name and a help shortcut opening the
documentation.
Restructure the group boxes to add more widgets.
Remove the gallery meta-tag from the styles example.
Task-number: PYSIDE-1112
Change-Id: Ie6f13084012771bd8f5bf9cad23b58d0720fdd92
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Deprecated the SAX classes and disabled or replaced their uses in
tests if applicable.
Removed the saxbookmarks example, no point in keeping examples for
the deprecated code.
[ChangeLog][QtXml] SAX classes are now deprecated. Use QXmlStreamReader,
QXmlStreamWriter in QtCore instead.
Task-number: QTBUG-76177
Change-Id: Ic171d62fa0527b0f36f94cf09a69586092269957
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
src/corelib/serialization/qjsonvalue.cpp:174: (qdoc) warning: No such parameter 'n' in QJsonValue::QJsonValue()
...
examples/widgets/doc/src/icons.qdoc:584: (qdoc) warning: Command '\snippet (//! [24])' failed at end of file 'widgets/icons/mainwindow.cpp'
src/corelib/text/qbytearray.cpp:5177: (qdoc) warning: clang found diagnostics parsing \fn QByteArray::FromBase64Result::operator QByteArray() const
error: out-of-line definition of 'operator QByteArray' does not match any declaration in 'QByteArray::FromBase64Result'
src/corelib/serialization/qjsonarray.cpp:178: (qdoc) warning: Overrides a previous doc
src/corelib/serialization/qjsonarray.cpp:140: (qdoc) warning: (The previous doc is here)
src/corelib/serialization/qjsonobject.cpp:1016: (qdoc) warning: clang found diagnostics parsing \fn QJsonValueRef QJsonObject::iterator::operator[](int j) const
error: out-of-line definition of 'operator[]' does not match any declaration in 'QJsonObject::iterator'
src/corelib/serialization/qjsonobject.cpp:1267: (qdoc) warning: clang found diagnostics parsing \fn QJsonValue QJsonObject::const_iterator::operator[](int j) const
error: out-of-line definition of 'operator[]' does not match any declaration in 'QJsonObject::const_iterator'
src/corelib/tools/qhash.cpp:2641: (qdoc) warning: Overrides a previous doc
src/corelib/tools/qhash.cpp:1492: (qdoc) warning: (The previous doc is here)
src/corelib/tools/qhash.cpp:2659: (qdoc) warning: Can't link to 'unit()'
src/corelib/text/qchar.cpp:274: (qdoc) warning: Undocumented enum item 'Script_Sundanese' in QChar::Script
src/corelib/text/qchar.cpp:274: (qdoc) warning: No such enum item 'Script_Sundaneseo' in QChar::Script
src/network/ssl/qsslsocket.cpp:1514: (qdoc) warning: Can't link to 'QSslConfiguration::addDefaultCaCertificate()'
src/widgets/widgets/qtabwidget.cpp:581: (qdoc) warning: Undocumented parameter 'visible' in QTabWidget::setTabVisible()
Change-Id: I05c2a4884873850b684fa94036cd90db1a6e7726
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Instead of polishing the (possible) system palette. Makes the checkbox
for "Use style's standard palette" actually work for the custom style,
and is how styles are supposed to provide their own preferred palette.
Change-Id: I3228ef45c023d0d058e48ff0fc14f094367b2008
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Allows running the example with -style foo or QT_STYLE_OVERRIDE.
No changes to documentation needed.
Change-Id: Id7cef450f13faabd118badde51afb7273439c9fc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Relying on the hard clipping of QRegion widget masks to create
non-rectangular windows is a solution from a bygone era. The result
looks horrible with today's eyes, particularly on a high-dpi
screen. Update the example to create smooth anti-aliased edges using
translucent window bacground.
Task-number: QTBUG-64229
Change-Id: I8859d61177d2a2dc446632c23f27f42050e0d7c7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The example is useful as a gallery for widgets in
which case the custom Norwegian Wood style is not primarily interesting.
Change-Id: I96e304f97edeb43da6e8f572e01a768b1317722c
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
