This architecture is obsolete and discontinued.
Support for PA-RISC can be re-added if needed, but it would be preferred
to use the GCC intrinsic support from qatomic_gcc.h (on Linux/HPPA, for
example).
Change-Id: I952e521a2c8c68840df0d44843b5487d5c20b135
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do that by keeping the QWeakPointer that track QObject independent of
the ones that track QSharedPointer.
QSharedPointer do not touch the sharedRefCount in QObjectPrivate anymore
When converting a QWeakPointer constructed from a QObject to a
QSharedPointer, it will display a warning saying one should not do that.
Task-number: QTBUG-22622
Change-Id: I3595e3e7401702410776c458687ab357ad9366ab
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
- Only run invalidConstructs() tests if not cross compiled
Change-Id: If99fccdf9bca339507ca60c49aa89dc35c535d3d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Marked four tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qfilesystemwatcher
- tst_qsettings
- tst_qlibrary
- tst_qsharedpointer
- Skipped one invalid case (tst_QCoreApplication::argc())
- Ifdeffed around vsprintf issue in MSVC (tst_QByteArray::qvsnprintf())
Task-number: QTBUG-24157
Task-number: QTBUG-24146
Task-number: QTBUG-24128
Change-Id: I4db957a65fbf0093f5ae3dc1a04d792492818104
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
As discussed on list and approved by Lars and Thiago.
Make QSystemLocale private to give us time and space to change it to a
better implementation.
Change-Id: Ifd806972f3996c43a876f544f78c6557ad71cd75
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Ensure consistent conversions by not using the system default locale.
Change-Id: I60db9fc4f465c0254f3213419e57d7879aaddd65
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QByteArray is declared as movable but it was not tested before.
Change-Id: I4fb636f8705c3fd792a768872206203ee5fd4ddb
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Convert QDate to only use Gregorian calendar and not Julian calendar
before 1582. In future the Julian can be used via proper calendar
classes.
Change-Id: I547a3550332057a0ab1be616706630b6afaceffc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store the QDate Julian Day number as an qint64 instead of uint32 to
enable support for dates before 2 January 4713 BCE. This changes the
possible date range to be approx 2.5 Quadrillion BC to 2.5 Quadrillion
AD. A qint32 was not used as it only covers 5 million BCE to 5 million
CE which does include Geological or Astronomical time.
The effective supported date range is currently 4800 BCE to 1.4 million
CE due to restrictions in existing conversion formulas. The effective
range will be extended later with new formulas.
Change-Id: Ib4345369455b31d4edae8c933b7721e76414e914
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Use source file location as working directory for externaltests
Change-Id: Ic05259f48eece920b348ccbde9ba80c90dedfdd2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made QString::operator=(QLatin1String) work in that case.
Change-Id: Ie77eabd2f8f036531d67cd8051a7b6305b386ccf
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QString(QLatin1String) constructor work in that case.
Change-Id: I4f4f07a956144b7ea4aa9c58a61c755fb99ef1b3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QLatin1String comparison operators work in that case.
Change-Id: I234ba851e67a6f5cfbb46fb6f0b22623ce40be28
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Remove methods that have been marked as deprecated
before Qt 4.6. Keep others, but inline them
where possible and mark them as QT_DEPRECATED_SINCE(5, 0).
Change-Id: If881821ae095f054b31cc13464f19e2007c20ed7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Check the validity of date/time before attempting to perform maths.
Change-Id: Ia6a2caf07c6c36f7d7fac713a77bc4eb456c6ed6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A few methods in QString still assumed that QLatin1String
is always 0 terminated. Change this to rely on the size
provided by QLatin1String instead.
Change-Id: I9145a46e52ed8811f3b4e3d72d8a81a12588760a
Reviewed-by: Kevin Simons <kevin.simons@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QLatin1String now has a constructor that takes explicit length, which makes it
possible to create QLatin1String that do not have null-termination character.
Fixed QString::operator> and < to be safe in that case.
In the same patch fixed qtjson which had operator< implemented in the same way.
QString::compare(QLatin1String) is still broken and will be fixed separately.
Change-Id: I48ec1183a6f44034129cc17312af854795085408
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Fix a couple of cases where WildcardUnix was not matching when the
string was just [] or ended with a \.
The testWildcardEscaping() test has been extended to account for these
two cases too.
Integrate 7ce3726aea4be2dfdb57966a4482f66fec6f8f57 from 4.8
Task-number: QTBUG-20897
Change-Id: I7a07ac008473fa7a080db752e189f6404842603f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If we request a substring starting at the very end of the string,
QString::mid should return an empty string, not a null string.
For instance, QString("abc").mid(3, 0) used to return a null
one, while this patch makes it return an empty one. The
same thing applies to QString::midRef() and QByteArray::mid().
Change-Id: Ie9efd7a0622d429efd0fb682c19856c19e9469af
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Add spaces where necessary, and pull braces back to the same line.
Change-Id: If543686c9727a110f8a91f1a88e08d5d2ac12284
Reviewed-by: Richard J. Moore <rich@kde.org>
- If we can find the qmake belonging to the build, use that instead
of qmake from the PATH for compiling subtests.
Change-Id: I9445754bb02dab11c3e1bbe9dc459ecc682689a4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Modified unittests to use specific class headers instead of
using super-headers like QtCore that pull in all the headers for
the module.
- Decreasing build time.
Change-Id: I9c3fd0767be15205893bb406f609c8283a2a3a5a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
It is mostly not used (most places in Qt use typename directly), so
is already not very useful.
For example typename is used in:
QDataStream& operator<<(QDataStream& s, const QVector<T>& v)
Change-Id: I85337ad7d8d4ebbb424bfa2ab9a356456ff3e90f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The removed class was evidently attempting to promote protected members
of its base class to public, but the way this was done doesn't work and
doing so wasn't actually necessary for the test.
Change-Id: I15e0c31891da08cacee1054e15596a79a058b466
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Pure syntactical sugar, to match up with what the other container
classes offer.
Change-Id: I0f97de011923d9d204cca0fa906b059dc5054a89
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
When using QSignalSpy, always verify that the signal spy is valid. This
will cause the test to give a meaningful failure when spying on a
non-existant signal. Without this change, tests that spy on a signal to
ensure that it is not emitted (i.e. by comparing the spy count to zero)
could pass erroneously if something went wrong when creating the signal
spy, as an invalid QSignalSpy will always return a count of zero.
Change-Id: I41f4a63d9f0de9190a86de237662dc96be802446
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This adds a new function (and tests) to give the possibility of doing a
QCryptographicHash of a QIODevice, like a QFile or whatever people
needs.
It is a quite handy overload in many cases.
Change-Id: I22fd272f05571844641b3daefcc6746be4e5c7c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This also adds a unit test for length()/count()/size(), since there wasn't one
testing it explicitly.
Change-Id: Ifb7f113aa97beef5f76e5fb246eb38495344b0ad
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Marco Schmidt <Marco.Schmidt@Taugamma.de>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QWeakPointer is superior and preferred.
Remove QMetaObject::addGuard(), QMetaObject::changeGuard(),
QMetaObject::removeGuard(), and QObjectPrivate::clearGuards().
Implement QPointer using QWeakPointer<T> instead. This changes the
behavior of QPointer in 2 ways:
- During destruction of a QWidget. Previously, the destructor of QWidget
would reset all QPointers so that they would return zero when destroying
children. Update tst_QPointer to account for this change.
- When constructing a QSharedPointer to take ownership of an object
after a QPointer is already tracking the object. Previously, the shared
pointer construction would not be affected by the QPointer, but now
that QPointer is implemented using QWeakPoiner, constructing the
QSharedPointer will cause an abort(). Fix tst_QSharedPointer by
removing the use of QPointer in the objectCast() test.
These behavior changes are documented in the QPointer class
documentation and in the changes file.
Change-Id: I92d0276219c076ece7bcb60f6e1b9120ce4f5747
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When using clang, the forward-declaration test fails to link, unlike
with other compilers. The standard says that deleting a forward-declared
pointer is undefined behavior, so the link failure is a valid result of
trying to do so.
Change-Id: I527b91c15b7d51d9522d95af0630e7dacd26bb30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is a source incompatible change. There is concern that the
convenience of the implicit cast and assignment operators can lead to
misuse. Several commits have already been done that remove excess use
of the implicit cast, which is a *volatile* read every time it's used.
Users of the QAtomic* API should have to think about when they are
loading the value, and if they do or don't need the acquire memory
barrier on load. The code that people would write using this API is
meant to be multi-threaded, concurrent, and correct. The API should not
allow them to inadvertently, possibly unknowingly, shoot themselves
in the foot.
SC-break-rubber-stamped-by: Lars Knoll
Change-Id: I88fbc26d9db7b5ec80a58ad6271ffa13bbfd191f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In .pro files, removed wince/symbian-specific DEPLOYMENT cases and
replaced them with TESTDATA where appropriate.
In .cpp files, removed SRCDIR and relative paths to testdata and
replaced them with the QFINDTESTDATA macro where appropriate.
Modified test helper apps/libs to install themselves under the test
they relate to.
This change allows corelib tests to be correctly installed, along with
their testdata, via `make install'.
Change-Id: I5e202e2f3b577af7e39072d5c9fe13e0ca125304
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The QString autotest shares test data between the remove() and replace()
tests because those functions are very similar. Unfortunately, when an
integer overflow bug was found in remove() the regression test was not
shared with replace(), which prevented the same integer overflow bug
from being discovered in replace().
This commit improves the test by sharing the overflow test data between
both functions, thus demonstrating the remaining bug.
Task-number: QTBUG-22967
Change-Id: I2778249800f74799d890eefa9227ca8ddd8fbaa3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rename the qUncompress test to make clear that the test only deals with
uncompressing corrupted data and add a message making it clear that this
test will produce some warning messages.
Don't skip creating the test data, as that prevents the test output
reporting exactly what is skipped.
The expected output is the same for every row (an empty QByteArray), so
don't bother storing that in the data table.
Change-Id: I59f1cc91a941bcaadacb2a613dd5eca2564961c1
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove references to the old bug tracker. The data from the old bug
tracker is no longer accessible, so these markers are meaningless.
Change-Id: Ib9d029d52b70fd0a512b9532d65f03763eabfe57
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
MSVC cannot decide on an overload for pow().
Change-Id: Ied3fbc0de403774d9f85738852cf671ce42cd1c1
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Don't name test functions using task identifiers from obsolete bug
trackers.
Change-Id: Iba6ae8ad3b39e365c5510ed5c86749a167572829
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
