For normal \page elements, \brief is just showing in the
\generatelist or \annotatedlist commands. Make sure the description
is also visible in the actual CMake command/variable/property
page by defining a \summary macro.
Pick-to: 6.2
Change-Id: I12bc854d547059a2f6309a5922bb0b2a36d4e41c
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
This reverts commit 657525965b.
The change relied on reading the last value of the
CMAKE_MINIMUM_REQUIRED_VERSION variable before one of the Qt packages
is found to use it for the version check.
Even if a user project has a cmake_minimum_required() right at
the beginning of the project with a supported version specified,
the first project() call which loads a CMake toolchain file could
contain another cmake_minimum_required() call with a lower
(unsupported) version and that version would be used for the check,
failing the project configuration.
The Android NDK ships such a toolchain file, which requires version
'3.6'.
Thus, relying on the last value of CMAKE_MINIMUM_REQUIRED_VERSION is
not robust enough.
Pick-to: 6.2
Task-number: QTBUG-95018
Task-number: QTBUG-95832
Change-Id: Iff3cb0a46e6e878569dce9c5fe915a714a034904
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
androiddeployqt writes a list of architectures into the build.gradle
file. This list should only contain the architectures which are enabled.
This patch adapts the generation of this list accordingly.
Amends 07cfab07a2.
Change-Id: I5c7c1886c54cc3b9a7e42af6eefbaf2a067a67d5
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Since Qt6, QByteArray uses qsizetype as an integral type for offsets
and sizes. In order to support large blocks, we have to migrate to
that as well.
Change-Id: I2c2983129d6a2e0a1e8078cc41d446a26e27288c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch removes most of the checks that are made using C++20
__cpp_* macros for features available in C++17 and earlier.
Library feature check macros (__cpp_lib_*) are unaffected.
Change-Id: I557b2bd0d4ff09b13837555e9880eb28e0355f64
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The comments are not needed, since we're adding a docs page
for the manifest, which include the information from these
comments and more. Keep the manifest clean.
Pick-to: 6.2
Task-number: QTBUG-95285
Change-Id: I1fd8bc695f5aab1bcc69f549cb3ddeeaac168b98
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The Gradle version in qt_attribution.json doesn't mention the actual
version that is currently used.
This amends 67c3f3f4ff.
Pick-to: 6.2
Fixes: QTBUG-71328
Change-Id: I50fbabd56beb44389f9453666822f9667bab7d61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Given that we rely on C++17, it should be safe to mandate that level of
language support.
Change-Id: If07ccb36bea2a5113a8f5aacf635be7d2590baf7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Third-Party Code] PCRE2 has been updated to version 10.38.
Change-Id: Ib6ab544790747a94a00b8eb516314ff3c57e4c79
Pick-to: 6.2 5.15
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The modification to the existing constructor was necessary to avoid
ambiguous overloads from plain strings. They'd previously only match
QByteArray, but now they match QByteArrayView too.
The QByteArray constructor must stay even in Qt 7 because the pattern is
stored. The QByteArray indexIn also stays in because of ambiguous
overloads. Unless we want to remove the const char* overloads.
Change-Id: I2bbf422288924c198645fffd16a92859b67f3978
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We were to strict in what surface type we allowed scrolling for. The
RasterGLSurface type is an odd one, used by widgets to compose GL
and raster content, which means we still have a raster backingstore
we can scroll. It's just the flush that's different.
Pick-to: 6.2
Change-Id: Ia229c21c00ad38df9e87f4fc78e341e030ef228d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The --skip-benchlib option was misnamed: there are several benchlib
tests, of which it only skipped the callgrind one. As there is no
other test involving callgrind, rename to --skip-callgrind.
Change-Id: I0179fd35dd79c525f79e4a28a626e964323409bf
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The comment against the use of this claimed qvsnprintf() lacks 64-bit
support, which is probably untrue by now but certainly irrelevant as
the value being formatted is a qreal, not a 64-bit integral type.
Since %g wants a double, make the value passed explicitly double by
casting its denominator. Casting its numerator to qreal was
superfluous as that's its type already.
Change-Id: I5ff885fbeb9b638b2b0507061e0a19e3b8522143
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Make the overloads taking a size private (they're only called by the
implementation of the others) and have them take qsizetype for the
size, rather than size_t. Make the still-public ones consistently
return 0 on failure and move the documentation to them.
Change some spurious checks (QTestCharBuffer::size() is necessarily
positive) to assertions, use '\0' for the nul character to make it
visually distinct from the integer 0. Use a do..while loop instead of
break-ing out of the tail of a for (;;) loop. Remove spurious extra
nul-termination - the function taking size alread did that, so the
wrapper to size-expand needn't. Minor style cleanups.
Change-Id: I7440f3d9be5e3b2dd88c2aad62bcd1af9fc02278
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The extern declaration for filter_unprintable() was nowhere used and
no such function is anywhere defined.
The for (;;) loop with lots of reasons to break; was better structured
as a do {...} while loop. A comment on -1 as return from qvsprintf()
was misplaced. The '\0'-termination after calling qvsprintf() was
redundant as vsprintf() reliably '\0'-terminates anyway. Turned a
static const into a constexpr. Assert size (a QTestCharBuffer
necessarily has size >= 512).
Change-Id: I5b7729b9bd66fea0ee7ce3e7cfdde6770f10b36c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The QtNetwork project file excludes the dnslookup source files for Unix,
despite the dnslookup feature is always on. This inconsistency leads to
linker errors when building applications against QtNetwork:
(error #412) unresolved symbols: 1
QDnsLookupRunnable::query(int, const QByteArray &, const QHostAddress
&, QDnsLookupReply *) from libQt6Network.a(qdnslookup.cpp.o)
Turn the feature off for INTEGRITY and remove the condition from the
project file.
Pick-to: 6.2
Change-Id: If086da51ca343f598eb273236e7b6338f5da1e97
Reviewed-by: Tatiana Borisova <tatiana.borisova@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch introduces support for the WinRT UI languages API.
We are using the Win32 API to get the list of preferred languages when
the system locale is used. However, this API returns an incomplete
list.
As Qt 6 supports Windows 10 and above, we can make use of the WinRT
API, if it's supported by the compiler. This API returns the full list,
as reported by the Windows system itself.
Note however, that this API can't be used with Clang and MinGW, so
we still have to fall back to Win32 API for these compilers. We also
do it if WinRT API returns an empty list of languages for some reason.
Fixes: QTBUG-94341
Pick-to: 6.2
Change-Id: I1d23c68d2ec298ae7835d0d18718876ff041aede
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We don't have any APSPI2 includes in our public headers and should
therefore not export the target that provides ATSPI2 include paths for
consumers.
Link against PkgConfig::ATSPI2 instead of the _nolink target.
The former will not be exported.
Pick-to: 6.2
Fixes: QTBUG-97023
Change-Id: I4b12e0c2230917feeb963c02565e6db24f757bd3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The `QFont` documentation refers to Roman Czyborra's personal page with
the intent of providing information about encodings.
The page seems to have been down for many years and may contain
information that is now deprecated such that it is now replaced with a
link to the Unicode Technical Report 17 about the Unicode Character
Encoding Model.
The new link was chosen as a substitute as it seems to cover or provide
the intuition for, standing by the last captured version of Roman
Czyborra's personal page on the Wayback Machine, many of the same
concepts.
Task-number: QTBUG-96127
Pick-to: 6.2
Change-Id: Ibf901b5023688c14efb3d6f77a10609f7ba80e72
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The "qt" property can also be filled with a json object like this:
"qt": {
"x86":"/home/.../Qt/6.3.0/android_x86",
"x86_64":"/home/.../Qt/6.3.0/android_x86_64",
"arm64-v8a":"/home/.../Qt/6.3.0/android_arm64_v8a",
"armeabi-v7a":"/home/.../Qt/6.3.0/android_armv7"}
That allows to update the options.qtInstallDirectory when changing the
current architecture.
The "qtHostDir" property is also added to provide the path to the qt
host installation (rcc, qmlimportscanner).
Change-Id: I3f0c36cc7a7030d45adc1a4dccaaad61dd538aea
Task-number: QTBUG-88841
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Calling emscripten_async_run_in_main_runtime_thread_()
with a pointer to a static lambda was too clever, use
an anonymous function as callback instead.
Pick-to: 6.2
Task-number: QTBUG-94344
Change-Id: I2d8a8b0ffc2dd1d02018aa5902550216d00f641d
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
With the QRegExp variant removed, it was weird to have all QSFPM
tests in "tst_qsortfilterproxymodel_regularexpression", even those
completely unrelated to regexps. Instead of reuniting into a single
executable as before, I simply split it out in separate executables:
* tst_qsortfilterproxymodel has the "standard" QSFPM tests
* tst_qsortfilterproxymodel_regularexpression has the regexp-related tests
* tst_qsortfilterproxymodel_recursive is separate as before
Change-Id: I345530b4352671164008bba4805af7b12ac90247
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The await() method waits for the result of async operation in a
non-blocking way (triggering processEvent periodically).
It means that during this wait some other things might happen, and
there would be no reason to wait for the end of the operation execution.
This patch implements an additional parameter - a function that specifies
a condition for an early return. When this function returns true, the
await() method returns with E_ABORT, which makes it possible to
distinguish it from timer expiration.
Task-number: QTBUG-96057
Pick-to: 6.2 5.15
Change-Id: Ide73d768b7cbb3a35be7160ce7555aeb2dca5235
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@insta.fi>
\relates takes a class name as argument, but doesn't deal nicely
with a templates full definition.
Pick-to: 6.2
Task-number: QTBUG-97028
Change-Id: I7c608717c5d552bc553073534104dece01b8ff96
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
We can only start timers in threads started via QThread, and even then
we cannot assume that the thread runs an event loop. So only start the
timer when we are in the main thread.
Add a test that verifies that we don't get the warning message.
Pick-to: 6.2
Change-Id: I40d7d9ff115720f9ecd3eedaebbade2643daf843
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Qt6Config.cmake calls cmake_minimum_required to ensure a recent enough
CMake version is used in projects.
That call does not set policies in the calling subdirectory scope,
because find_package introduces a new policy scope.
If a project using Qt has a 'cmake_minimum_required(VERSION 3.1)'
call and is configured with a recent CMake, many policies will
still be set to OLD.
One such policy is CMP0071 (Run AUTOMOC on GENERATED files). The
policy value is queried at generation time rather than at target
definition time, which means we can't influence the policy value
(e.g. inside the implementation of qt_add_executable for example)
The inability to influence the policy value for targets created by our
own CMake functions is unfortunate and can lead to issues (in the case
of the above policy to compilation / linker issues).
Record the version of the last cmake_minimum_required call before
the Qt packages are found and error out if the version is lower than
the minimum supported one.
A project can reduce the error into a warning by specifying a
-DQT_FORCE_MIN_CMAKE_VERSION_FOR_USING_QT_IN_CMAKE_MIN_REQUIRED=3.xyz
option when configuring the project.
If the option is used and build issues arise, no official support is
given.
All the CMake example projects shipped with Qt specify a minimum
version of 3.16 already (which is the minimum for shared Qt builds),
so it shouldn't be an issue to require that in other user projects as
well.
Implementation wise, we follow the existing pattern to record
what the minimum and computed versions for static and shared Qt
builds are at qtbase configure time.
These are then checked before the Qt6 or QtFoo packages are
find_package'd.
Amends 6518bcc167
Pick-to: 6.2
Task-number: QTBUG-95018
Task-number: QTBUG-95832
Change-Id: I1a1d06d82f566c92192a699045127943604c8353
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Not relying on some implicit include coming from other include.
Pick-to: 6.2 5.15
Fixes: QTBUG-96621
Change-Id: I11f6a20e98871eacee51ad723c484f25916c2882
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Don't bother overwaiting in waitForDone(), if it was done at one point
after it was called we can return true. And do not stop threads recently
awakened by a startThread call as they have tasks to do.
Make allowing at least one thread regardless of reservation more
standard instead of hacked in certain places.
Pick-to: 6.2
Change-Id: I304bcdc5822f440d5e72fc33ba2aa1678c9ba0d0
Reviewed-by: David Faure <david.faure@kdab.com>
If we know at compile time that a window system interface event will be
delivered synchronously, then we can allocate it on the stack avoid a
new/delete. This is the case for a large number of events.
Add a template helper class that is specialized for the three delivery
types to allocate the event object on the stack if possible, and on the
heap otherwise. We can use that factory in the event handler functions,
via a helper function, to replace the heap-allocation and call to
handleWindowSystemEvent.
Done-with: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: If92fc91ef07f3542a37dfb0fed20e15a3d19b8f0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This header is a C++17 feature that is already used unconditionally
in qtypeinfo.h.
Change-Id: I26330d298e95102f3e94c0c69fc95c1025666eb4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Testlib is not thread safe. Store the status into variable and check
it in the main thread instead.
Pick-to: 6.2
Change-Id: I840c8a3dceb1115a1b81ffeaa0fab96f9d2f1ff0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt requires a compiler that support C++17 thus __cplusplus
is always 201703L or higher. This patch removes checks
for __cplusplus value that always succeed.
Change-Id: I4b830683ecefab8f913d8b09604086d53209d2e3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Item views can open an editor widget on the first key press, and need to
take special care not to break input methods. The initial key press
starts compositing by the system input method, which is then interrupted
by the focus transfer to the editor.
To solve this problem, the widget needs to keep focus while the initial
composition is ongoing, and only transfer focus to the editor once the
composition is either accepted or cancelled by the user. Add a state flag
that is set during this initial preedit phase.
During this initial composition, the item view will receive all input
method events, and needs to forward these to the open, but not yet focused
editor for the user to get the correct visual feedback during the preedit
phase. The item view also needs to report to input method queries on
behalf of the editor to make sure that the IM UI is correctly positioned
without covering the user input.
Implement a test that simulates the sequences through synthesized
QInputMethodEvents; we can't simulate the entire system input stack.
Fixes: QTBUG-54848
Change-Id: Ief3fe349f9d7542949032905c7f9ca2beb197611
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
In addition to checking the .lnk extension, check that the
the specified path is not a path to a directory.
Pick-to: 6.2
Fixes: QTBUG-85058
Change-Id: I83cef3d94c6ffa82a88f374c5b41779e88fe40b8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
At the current state, Qt::WA_StaticContents is not respected on any
platform, and optimizations for opaque widgets is not implemented on
Cocoa.
Task-number: QTBUG-73117
Change-Id: I48b7b0c4436da5a609fdbe51bb1c9789a2a059bd
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is a manual test of QWindow::requestActivate() and how it
interacts with implicit activation from the window system. Written in
order to test QtWayland, but hopefully also useful for testing on other
platforms.
Task-number: QTBUG-91542
Change-Id: Id18dc6d146d213a7c730cff343d9fc25f6c42514
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
On macOS, we get explicit notifications when a window becomes or resigns
the key, before we have had a chance to close open popups. The popup is
then closed later, but the delivery of the WindowDeactivate event has
already been aborted as QApplication interprets such notifications while
in popup mode as delayed focus events.
This leaves the focus widget still displaying focus even though its
window is no longer active. Trying to activate the window again then
does not correctly transfer focus.
To fix this, close all popup explicitly when a window resigns key.
Task-number: QTBUG-78750
Fixes: QTBUG-66513
Fixes: QTBUG-69710
Pick-to: 6.2
Change-Id: I590757c7d3532dbe4b5358a8e121ce8aa871a699
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When building for armeabi-v7a, building and APK using
"ninja foo_make_apk" works. Building it by calling
"gradlew assembleDebug" works. Opening the "android-build" folder
in Android Studio and clicking the "Build" button works.
But clicking the "Run" or "Debug" button in Android Studio does not
work when the attached phone is arm64-v8a. Then Android Studio
automatically selects the v8 architecture which does not find the Qt
libraries. This patch adds explicit ABI selection to the gradle
configuration files. With explicit ABI selection, Android Studio does
not try to outsmart you.
Pick-to: 6.2
Fixes: QTBUG-96701
Task-number: QTBUG-87022
Change-Id: I4ad6356c38b7eca004c0e0dbbb357cab7de84c0f
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
QDoc modifies its linking behavior depending on whether the -installdir
command line option was set or not; Without -installdir, QDoc will
use 'https://<url>' to link to targets loaded from external
documentation modules, instead of using relative paths.
Drop the -installdir if QT_BUILD_ONLINE_DOCS was set. This behavior matches
the 'build_online_docs' scope that was used for qmake documentation
targets, and is useful for documentation projects that are not part of
Qt but want to link to Qt docs simply by loading the index files of Qt's
modules.
Pick-to: 6.2
Change-Id: Ib1bbf7b9d784e0c276d2bc520240af4a6c8ba903
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This fixes a bug where calling exec() on a secondary
thread would make the thread exit.
Task-number: QTBUG-94344
Pick-to: 6.2
Change-Id: I259c7ebbd53271609af88aca141d88c282cbcd34
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
In the Android gradle files, the variable qt5AndroidDir refers to Qt5
and might confuse users. This patch renames to qtAndroidDir.
Pick-to: 6.2
Change-Id: Ib18a3cd2c38646e4c6c0435dae9234f0f7887eb5
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Store isWidgetType and isWindowType once to avoid multiple tests, and
use a single QWidget* variable for widget receivers once we handle those
explicitly, rather than separate declarations for each event type.
Fix indentation to make it more obvious that the entire switch statement
is only executed for widget receivers.
Remove unreachable code for QGraphicsWidget key handling. At that point,
we already know that the receiver is a widget, which QGraphicsWidget is
not, so this code was never executed anyway.
Minor clean-ups, coding style improvements, and standardisations of
repeating patterns.
Change-Id: Idfe944f041ae82372b17082a5ffc4df13802359b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
On Android, when the system library directory does not exist,
no error message was given. This led in turn to error messages like
Can't find 'nulllibQt6Core_armeabi-v7a.so'
which are not very helpful.
Pick-to: 6.2
Task-number: QTBUG-80766
Task-number: QTBUG-96701
Change-Id: I4187e4a68d9e78e198152306a3e664c30c51ab18
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
When official version is available variableValue path need to be
changed.
Task-number: QTQAINFRA-4540
Change-Id: Ie5fe676962297aa5f18f225eb4b8dfe0957671c8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This adds a few snippets to show how the functions can be used, and also
removes workarounds for oldver versions of qdoc that weren't clang based
- those workarounds also seem to have caused some bitrot.
Remove documentation for an overload of registerMutableView that
currently does not exist (for a member function with an ok parameter).
Fixes: QTBUG-96963
Pick-to: 6.2
Change-Id: Ibc867d08bcacbc7add8c965df9864d6f339a5d54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qobject.h has #include <chrono>, which #includes <ctime>, which includes
<time.h>.
datetime.cpp:2621:23: error: 'localtime_r' was not declared in this scope; did you mean 'localtime_s'?
Pick-to: 6.2
Change-Id: I2bbf422288924c198645fffd16a922719c4ce7d4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
