Files in DISTFILES are placed into a "Distribution Files"
folder under the project node.
Task-number: QTBUG-43162
Change-Id: Ib75aacf1010d9ea63af89d4a9cc92275d714b3cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
in most cases, it actually means normalizePath() (because the file name is
used with qt i/o functions afterwards).
this affects QMakeLocalFile::local() as well, so many not immediately
obvious places are affected as well.
there was also one case of fixPathToTargetOS() falling into this category.
this is mostly a no-op, as the qt functions are agnostic to the path
separator.
in some other cases (in particular in the vcproj generator), it actually
means fixPathToTargetOS().
this is mostly a no-op as well, as the two functions are equal except on
msys anyway.
in the <meta file>FileName() functions, the use of a fixPath*() function
is bogus in the first place - fileFixify() already does
fixPathToTargetOS(), and this is correct when the file name is used
verbatim in a make command (which it is). otherwise it's irrelevant.
Change-Id: I26712da8f888c704f8b7f42dbe24c941b6ad031d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no reason why there should be unexpected leading or trailing
whitespace in an extra compiler's .depends list.
Change-Id: I46be75063180131e135fc6eea0238a482073618a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of quoting more or less random variable contents early,
consistently quote everything only right before it is needed. this way
we can be sure that everything is correctly quoted, but not over-quoted.
this removed the need for the insanity that unescapeFilePath() and
similar ad-hoc contraptions were.
this had the somewhat counter-intuitive effect that it was possible to
remove escapeFilePath() calls from PBX::writeSettings() calls - these
were actually only unescaping.
[ChangeLog][qmake][Important Behavior Changes] A lot of quoting issues
have been fixed. As a side effect, qmake has become more sensitive to
over-quoted file names in project files.
(*) ok, maybe not. close enough.
Task-number: fatal: out of memory
Change-Id: I8c51cfffb59ccd156b46bd5c56754c480667443a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
fixing and escaping is now a tri-state option:
- none (this removes the need to unescape the result right afterwards in
some cases)
- local shell (for system())
- target shell (for Makefile)
Change-Id: I5b78d9b70630fe4484dc964eff5f62793da35764
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
These mkspecs are not supported and no longer compile. Related support in
qmake has also been removed.
Change-Id: I7706dcfa5471e55e2ae3d580d65e9371e2c652d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Commit af760349 in Qt4 broke the possibility of having a
PRECOMPILED_SOURCE in a different directory than the
PRECOMPILED_HEADER.
Do not write the PrecompiledHeaderThrough value for the
PRECOMPILED_SOURCE, but use the project default.
The msbuild code path needed adjustments to write the
UsePrecompiledHeader value, even if PrecompiledHeaderThrough is
empty.
Task-number: QTBUG-41917
Change-Id: I74e621f6618cf056e3967c99a2215f76c346b9ee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Commit 4f21eb03 utterly broke the project file generation for
VS 2008. The introduced filterByName convenience methods looks for
filter names like "Generated Files", but the code path for
VS <= 2008 used filter names like "GeneratedFiles".
The generated projects were valid but empty.
This commit ensures that both VS generators use the same filter
names.
Task-number: QTBUG-41821
Change-Id: I828fa911bae8d835b073a4c2260316127cc72cda
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Move common code into a function
and exit early from simple search loop.
Change-Id: I88d1227653e28badc213fbe4ebe1e2a19f6e5793
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make use of the mythical C++ feature "function" to soothe the brain ache
of anyone who looks into this part of the code.
Change-Id: I740e29f1777d91d3b34a61fa62a5c23c222334b9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When the user adds a compiler option that qmake doesn't understand, a
warning message is printed. One can suppress these warnings now by
adding CONFIG+=suppress_vcproj_warnings to the project file.
Task-number: QTBUG-37520
Change-Id: Ieb7ad2c900329e76636047dff85824ea0456f608
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Tweak qmake, add mkspecs for emulator and device, adjust the
manifest template for WP8.1, and add missing icons.
Change-Id: I7a6405fa85297ae4cc8522015274e65fb7a315a6
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
/FS forces the compiler to synchronize pdb file writes.
This option is not needed when building with Visual Studio itself.
Still, qmake needs to know it when parsing the compiler flags.
Task-number: QTBUG-36535
Change-Id: Id5b68c4028844e0b95904e08b5121310a4ff13d6
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
windeployqt is a tool that aids in the deployment of Qt libraries and
other files on Windows. This feature (CONFIG+=windeployqt) adds
automatic invocation of windeployqt for qmake projects as a post-link
action. For Visual Studio projects, windeployqt is added as a custom
target which runs after linking, automatically adding the output as
deployment items.
Task-number: QTBUG-35630
Change-Id: I4cdcb1a7f70cedccb4a4e17be5eb9f5de35a4d66
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In VS 2010 and newer the /SAFESEH linker option is not passed as
additional option but is represented by the property
ImageHasSafeExceptionHandlers.
Task-number: QTBUG-34392
Change-Id: I3bd19078e695716050dd20736b6bc589bcb1cefd
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
The user needs to specify the DEPLOYMENT variable. The syntax
is the same as previously used for DEPLOYMENT. For more info
please refer to the qmake documentation. The change adds
a new itemgroup, "Deployment Files". All files in this
itemgroup are marked as DeploymentContent and are then
packaged with the application either as XAP or the WinRT
specific file format.
Change-Id: Icf85887287c1c97eb782704340eaa3f8dde6719e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In order to be able to use the linker's /WINMD
and /WINMDFILE options
Change-Id: I2673e20aa073c6b807e8c9f191fd408c7976efc4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmakespec for either WinRT or WinPhone have to specify
QMAKE_PLATFORM with winrt and/or winphone.
Change-Id: I87e0063881e6edd65de14adb006949247ce49904
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When building a project in VS then it would cause a rebuild
under certain situations even though a rebuild is not
actually required.
The root problem exists in VS in the following configuration:
1. A file has a custom build tool specified
2. The custom build tool has additional dependencies
3. The input file is specified in the additional dependencies
4. There are files in the additional dependency list
This is the situation with form files in Qt that have include hints
specified in Qt Designer. The include hints get specified in the
additional dependencies for the custom build tool.
What happens is that VS will process files in the additional
dependency list differently based on where they appear in the list
relative to the input file.
If a dependency appears before the input file, VS will require the
file as a build input. If you just specify a file name, VS looks in
the project directory (and only the project directory) for that file.
You have to specify the path (relative or absolute) to get VS to look
elsewhere. If VS does not find the dependency, VS thinks the project
is out of date (since the missing dependency is a required build
input) and will rebuild the input file.
If the dependency appears after the input file and the file doesn't
exist, VS does not include the dependency as a build input. Since the
file is not a build input, no rebuild is required.
Change-Id: I5af460d21ad049ed7819746fd60c98677b810692
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When defining QMAKE_LFLAGS += /MANIFEST:NO to pro file,
it is not written to vcproj in VS2008.
Added MANIFEST:NO generation to vcproj
Task-number: QTBUG-31975
Change-Id: I5f84b30db711bf9c317ca20dc65b207140edb398
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The removal of embed_manifest_dll or embed_manifest_exe from CONFIG
now disables the embedding of manifests in VS project files.
Task-number: QTBUG-5301
Change-Id: I031318883edca6f9b63a7981ef6c44e3f123f6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For vcproj files we should not automatically add a dependency for extra
compilers as this should be done via the depends variable for the extra
compiler instead.
This fixes a problem where something like '@echo command' was used in the
command as it would depend on echo and not the actual command anyway.
Change-Id: I7c0aa0d62143aa39c518e8bce65f302afdba33c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
/RTCsu and /RTCus must be handled as full runtime check options.
Task-number: QTBUG-30711
Change-Id: I783bf49f2ab1d4fd9636dca8e434bccb54844c8c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The vcxproj format supports the /we compiler switch as
TreatSpecificWarningsAsErrors tag.
Support for this switch got lost during refactoring of the
vc(x)proj generators for Qt 4.8.0.
Task-number: QTBUG-29098
Change-Id: I607e907dcb9c1bc7d261053b6d757941ec7db822
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Both the /NXCOMPAT and /DYNAMICBASE options were handled by qmake but
never written to the vcxproj file even if they were set in the pro file.
Change-Id: I4ca26fb312648944c25d3a24cdc8c640c9de619d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
/Gs[size] will be added as additional option as there is no XML element
for this option.
Task-number: QTBUG-29329
Change-Id: I1f09bfdac90f9c5f2333dc03e6e4e6a206b4f6d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The default must be "unset" to let the user's MSVC settings decide
what the default value is.
Task-number: QTBUG-29329
Change-Id: I6015202c123dbb7304941b0d24557a26a1e3236c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In single config mode extra compilers were not written to Visual
Studio project files, because they were not added to the fake project
object we're using to write a single config project.
Task-number: QTBUG-27505
Change-Id: Ie57b648861573496252f1383dc77e0729e244947
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I9c9964703dedfdab6e7bfac80be22bd5570e2e49
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is preparation for adapting to a new evaluator.
Change-Id: I6fc59f5525735754a00afa6629fbfe257e84db97
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The QByteArray::operator const {char,void}*() implicit
conversions are a source of subtle bugs, so they right-
fully can be disabled with QT_NO_CAST_FROM_BYTEARRAY.
const char *d = qstring.toLatin1(); // implicit conversion
while ( d ) // oops: d points to freed memory
// ...
But almost no-one ever enabled this macros in the wild
and many were bitten by these implicit conversions, so
this patch deprecates them.
I would have liked to remove them completely, but there
are just too many occurrences even in Qt itself to hope
to find all conditionally-compiled code that uses these.
Also fixes all code that needs to compile under
QT_NO_DEPRECATED (in qmake/, src/tools/).
I984706452db7d0841620a0f64e179906123f3849 separately
deals with the bulk of changes in src/ and examples/.
Depends on I5ea1ad3c96d9e64167be53c0c418c7b7dba51f68.
Change-Id: I8d47e6c293c80f61c6288c9f8d42fda41afe2267
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
