TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Since special files have file size == -1, they were always filtered
out by QFileSystemModel, even when passing QDir::System as filtering
option. Keep them instead.
The testcase is more convoluted than it should be because QFSM
is so broken that it returns valid indexes for invisible elements
in the model (such as filtered out elements).
Change-Id: I023a9813dbfeed7be99dded42c66b1191afdc17e
Task-number: QTBUG-20968
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test was comparing an "unsorted" file listing read from disk
with a reference listing, checking whether the two were different.
Obviously that's a nonsense test, as there's no stable order
for the entries returned by readdir_r and friends.
Change-Id: I1d781a6513c42bb0b585d02e57a771c5336c7df4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Change-Id: I8636993571b04d8cda74708777ba3ef2bac09fb5
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
I still have no idea how to fix this properly given the absolute mess
of QWidgetLineControl. For now add a failing test.
Change-Id: Ieb5ad6994c8ce7deb0cd0f2f47d51073d042244e
Task-number: QTBUG-49295
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The pixman drawhelpers are implemented using GAS syntax, which the
Clang assembler doesn't handle, nor do they work on 64-bit ARM, so
we disable them selectively. They are only used for 16-bit surfaces
anyways, so it not a big deal on iOS.
(cherry picked from commit 49568df954)
Change-Id: I70848981c794739d40a6a2d9a537307bc80d61a6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
If no screens are available, windows could disappear, could stop rendering
graphics, or the application could crash. This is a real use case in several
scenarios: with x11vnc, when all monitors are physically disconnected from a
desktop machine, or in some cases even when the monitor sleeps. Now when the
last screen is disconnected, it is transformed into a fake screen. When a
physical screen appears, the fake QScreen is transformed into a representation
of the physical screen. Every virtual desktop has its own fake screen, and
primary screens must belong to the primary virtual desktop. It fixes updating
screen geometry on temporarily disabled screens in the middle of the mode
switch.
Expected results: Windows don't disappear, the application doesn't
crash, and QMenu is displayed on the appropriate screen.
This reverts patch 51ada7734a
Change-Id: I6e8eb682b0c8425d08ffdaecbd4c6c7700c914b4
Task-number: QTBUG-42985
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
QXcbWindow::m_xcbScreen was introduced in 4e1b09fa8f
(Keep screen geometries from overlapping) to map the window
geometry for the right screen, because it wasn't possible to
rely on QPlatformWindow::screen().
But we don't need it since a705b4ec1f
(Introduce cross platform high-dpi scaling), because QGuiApplication
triggers GeometryChangeEvent right after processing WindowScreenChangedEvent.
So just use QPlatformWindow::screen() instead of cached m_xcbScreen.
m_xcbScreen was also used in d4bc56cb42
(Fix screen detection on configureNotify) to compare the new screen
after receiving ConfigureNotify to the correct old screen. Just send
WindowScreenChangedEvent event and leave making the comparison to
QGuiApplication.
Change-Id: Ibe717ae4bf4c40b0a04cd62fe2ecaee5df5f4060
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
The parser in QMakeSourceFileInfo::findDeps() would step over the
closing quote of a string, only to have a for loop then step over the
character just after that closing quote, which was thus never studied;
this could lead to problems in various ways. Fixed that and expanded
findDeps() test to catch regressions.
Task-number: QTBUG-17533
Change-Id: I7dec5222e38fa188495b39376ffee70bc7bbc87f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Recent changes to the main file accidently removed the
parameter from the call.
Change-Id: I4cce48327d43d9ea3fe4fd82c2f5768aa4bc6d5c
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Graphics effects may exceed the window size, causing platform
backing store operations to fail (see QWidgetPrivate::effectiveRectFor()).
Task-number: QTBUG-49785
Change-Id: Iff16da599397d19acb86010fe7023f3ce15b6d6f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
OpenFileMappingFromApp has been added for Windows 10. Using it,
QSharedMemory autotests succeed without any failure.
Change-Id: I5a4fbec004f121f41909ae13f3db02c384810645
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
QFINDTESTDATA is already prepared to find it there.
Change-Id: I467392786ce6bcfbf1bd0b6079f60c9df06834b1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
Change-Id: Ia4dbb2e3b055a7899c4a3e02698c5776ea7f73ea
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
It makes little sense to give focus to a hidden widget; in order
to make the treeview visible, we need to set the view mode to Detail.
Change-Id: I453111e83593a790a656651b603a9c9b1a78dd9d
Task-number: QTBUG-7690
Reviewed-by: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
By calculating the previous geometry and passing it on when calling
handleGeometryChange we can detect cases where setGeometry() on a
QWindow didn't result in the expected geometry. The new (actual)
geometry is delivered as a resize event.
This also allows us to only send expose events when the size of the
window has actually changed (instead of also sending when the window
has just moved).
Due to the async delivery of geometry changes on the xcb platform we
need to avoid using QWindowPrivate's cached state of the geometry, as
that will result in duplicate resize events when events are not flushed
in between two system resize events coming in with the same size.
Change-Id: I3d4abe4a1095dd96e6e354288d5b646c623c30dd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
For certain devices vci->resolution is zero, which causes a SIGFPE
if FE_INVALID exceptions are enabled. Try to prevent that.
Task-number: QTBUG-42717
Change-Id: I388735f5dfb6218496787dbb74cf0c0f43cc928f
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
... otherwise we would not detect subsequent file/directories added
into the non-removed one.
Change-Id: I43018dfb9a9c6c0399190800da3f0d572ec5d8d8
Task-number: QTBUG-49307
Reviewed-by: David Faure <david.faure@kdab.com>
...just like in config.summary
Change-Id: Idb34cdd39f706d7a7e75dfc0388d0a1fdb1f2317
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This allows QML Menu, Dialog & SystemTrayIcon to use the same enums
without having to duplicate them.
Change-Id: I1401583d3ae2ef07cdc795d2765fba07c9b30f2f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
- Remove duplicated rules
- Add a rule for class centerAlign
- Remove width restriction from paragraphs in table cells
These fixes enable proper horizontal center-align of images in
table cells.
Change-Id: I68a4863fe642a552260dfd6dbbb5d9675a8d2b4d
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
We have to call Exit() to successfully close an application as done in
25dcc90d79. Unfortunately Exit() always
sets the exit code to 1 and this cannot be changed programmatically.
Hence write the exit code into the pid file which is created when
launched via winrtrunner. winrtrunner then fetches the content and
passes the exit code to its callee. This implies that the pidFile is
not deleted by the app itself anymore.
Task-number: QTBUG-38654
Change-Id: Ib9b6ae4a0d61c9bf7e530e984aae3ad6204c39a0
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
CFBundleCopyExecutableURL returns different URLs (can be absolute or relative)
for the same bundle (caching) - and this results in an
invalid encodedProgramName (in case we try to start the same process twice),
for example, if we start: QProcess p; p.start("nestedDir/nested.app")
twice, the second time we'll have an error trying to start something like
nestedDir/nested.app/_and_here_absolute_url.
Change-Id: I8ac42e20fe3b9fe8b80d5b5c663672e77d88269d
Task-number: QTBUG-49837
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
A minimal device spec that can be used to build for arm devices.
Change-Id: I4c9949d8cc59ad534fc7617034f6beb40d6a987e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If CROSS_COMPILE is set on a Debian multiarch platform, then PKG_CONFIG
should be set the same way as the other cross compilation tools.
Change-Id: Id359a6bbdcbf8a136a0268a82301fc086a2adcfe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Before this change, it was checked if the path ends with "Compose", which was
an invalid assumption as the file can have any name (see [1])
This replaces the check with a check for any existing file (which wasn't
checked before).
[1] http://www.x.org/releases/X11R7.7/doc/man/man5/Compose.5.xhtml
Done-with: Florian Bruhin <git@the-compiler.org>
Task-number: QTBUG-41557
Change-Id: If4fb58d4c1ed695f2d611236abfe97964b548678
Reviewed-by: Gatis Paeglis <gatis.paeglis@theqtcompany.com>
Add a line to load footer content from the global style folder.
Change-Id: If57f13c2301e6145a26b3a4d04c7cb4695fe55fe
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Insert a group box depending on style hints.
Change-Id: I1b49dc31d5bd32c92d88f95be0683d5223329c11
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Use the new API QStyleHints::showIsMaximized().
Change-Id: I1342b3c29ef4ccfcf635a32d403f9aa7ce0cb4e4
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Use QDebugStateSaver, drop the multiline format, check for null, empty and
output rectangular regions as:
QRegion(0,0 252x188)
and complicated regions as:
QRegion(size=4, bounds=(0,0 278x262) - [(0,0 278x13), (0,13 13x188), (265,13 13x188), (0,201 278x61)])
Change-Id: I82b8f58af08f7128e6cf2c2c8b06c4684fc6a9c8
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Qdoc gave warning "Cannot link this to anything"
Task-number: QTBUG-43810
Change-Id: Id903040ed7b2860a2ec64a52f7fbe8269c6927b0
Reviewed-by: Martin Smith <martin.smith@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
This information is outdated.
Change-Id: Ic2e10f7c858eed6f1b7c550995cb29004b4bd280
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This allows to use readDatagram on WinRT like on
any other platform, ie using two arguments.
Fixes compilation in auto-tests.
Change-Id: I4a6e34dc72d2845faab9067ce67800d8b386c344
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
When showing an edit menu on iOS, UIKit will always populate
the menu with actions according to what the current first
responder supports. But it doesn't make sense to show all the
actions every time the menu opens, so introduce some filtering
depending on selection state.
Change-Id: I943a09928233a3a10de003fe15ed8fd8b6fc1e18
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Now that we don't populate the edit menu from qtquickcontrols
anymore (because of shortcut issues), report to UIKit that
we support select so that the action shows in the menu.
Change-Id: I92508da4e1789c361d778cc6c1c77c86308f4c73
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Replace hide() call (present in itemViewKeyboardEvent since Qt 4.5)
by reject(). Add signal spy to existing test function.
QDialog doc states that reject() will always be called on Key_Escape.
hide() is not enough: it makes exec() terminate and return the proper
value, but the signals finished(int) and rejected() will not be sent.
Task-number: QTBUG-7690
Change-Id: Ica4ae2843574478c5b9a7672f871f3ef3f16f3c9
Done-with: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
First tries OpenGLES 3 context since it’s strictly compatible with
OpenGLES 2. If it fails, then try 2.
This is required to use QOpenGLFramebufferObject::blitFramebuffer
without having to look at using an Apple-specific extension.
Change-Id: I01f8f058fa82e7f2c90d1b894ad36f3d3939c994
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Otherwise, the first font from the list is used ("Algerian" or similar),
making the widgets/richtext/textedit example look bad.
Change-Id: Ia5bb8879f167fef7ad7e81611760ee042abf8da3
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
