This is a regression from commit 346c15102b, which creates a new QRegExp
in setFilterRegExp, losing previously set case sensitivity property
(i.e. when the code does proxy->setFilterCaseSensitivity(Qt::CaseInsensitive)
before setFilterRegExp).
Interestingly that commit ensured that setFilterFixedString would still
preserve CaseSensitivity, but not setFilterRegExp(QString).
Change-Id: I3d37d001ce6e86dd90e7e07431440a42607172f9
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
This new test double-checks the bugfix for QSortFilterProxyModel::insertRows
in commit 70ba75519d. Previously, when using QComboBox on top of
QSortFilterProxyModel and calling QComboBox::addItem with row==rowCount(),
an empty item was inserted in one place, and then another item was modified
(instead of the inserted empty one). This test checks that the above bugfix
indeed fixes the behavior of QComboBox::addItem when used in this manner.
Task-number: QTBUG-69158
Change-Id: Id01345e0525694a57250c656222d626e2267aa8e
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch implements the support for QRegularExpression in
QSortFilterProxyModel.
[ChangeLog][QtCore][QSFPM] QSortFilterProxyModel now supports
QRegularExpression.
Task-number: QTBUG-46810
Change-Id: If932d55f98f9b8bcf3a72c03ffd51da52cb50ad1
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
Before this change, if you try to insert a row at the bottom of QSortFilterProxyModel
the row will be inserted in the source model at position proxy->rowCount rather
than at the bottom. This causes insert at apparently random positions in the source.
[ChangeLog][QtCore][QSortFilterProxyModel]
QSortFilterProxyModel::insertRows(row,count,parent) with
row == QSortFilterProxyModel::rowCount will insert at the bottom of the source model
rather than at the row QSortFilterProxyModel::rowCount of the source model
Task-number: QTBUG-58499
Task-number: QTBUG-69158
Change-Id: Ie78416c8fbc429303b8c9c98375630e3e4d85f6d
Reviewed-by: David Faure <david.faure@kdab.com>
I'm not sure why QSFPM purposefully emits dataChanged for a source
dataChanged that triggers a layoutChanged (i.e. due to sorting, multiple
rows are moving around). (This predates the git import in Qt 4.5.)
Surely whoever is listening will not gain much from the "small" dataChanged
after the "big" layoutChanged... anyhow, this documents the current behavior,
at least.
It also proves that the bug I saw long ago (changing a filtered-out
value used to emit dataChanged(invalid, invalid), IIRC) is no longer present.
Change-Id: I8975c549db88226b2b3393de9f8dca4f4109df15
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The row names for this test were very unspecific.
After reverse-engineering what they are testing, I gave them proper
descriptive names, which allowed me to notice that there were tests
for "filtered in after sourceModel->setData" but not for
"filtered out after sourceModel->setData".
Change-Id: Ib79108db803ae77fb65d29cf0c0ef96c26655980
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
When removing rows, the tester is looking at the data of the row
"just before" and the row "just after" the removed rows, to see if
they are still the same at the end of the removal operation.
Guard this with bounds check, in case there is no row just before
or just after.
This is the opportunity to use modeltester in tst_qidentityproxymodel,
which was already a testcase for removing the only row in a given parent.
Change-Id: Iec8228c16b9c670b794e2665356d153679178494
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When a new model was set with setSourceModel() and the mapping was
built up, the destruction of the old model caused a reset in the
QSortFilterProxyModel which lead to an empty view or an assertion.
Now we properly disconnect the old model again and also clean up the old
mapping/persistent indexes when a new source model is set.
Task-number: QTBUG-44962
Task-number: QTBUG-67948
Task-number: QTBUG-68427
Change-Id: I2e0612899c210bde3ac0cfa59aefd78269deee5b
Reviewed-by: David Faure <david.faure@kdab.com>
Replace the code for isRowSelected and isColumnSelected with
a much simpler algorithm for deciding if a row/column is selected.
In a model with a cross-hatch of unselectable indexes, the return values
of is(Column/Row)Selected would depend on the order in which the
selections were done.
Task-number: QTBUG-18001
Change-Id: I6aa4b1df7c07fae469a686041927fa8c42bc9b16
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When the source model of a QSortFilterProxyModel has rows removed, a
mapping is performed in order to figure out which corresponding rows in
the sorted and filtered view of the model are affected. In doing so it
constructs a vector of removal intervals which are subsequently used to
emit rowsRemoved signals. In the case where many rows are removed (e.g.
all of them), many removal intervals are identified that are often
adjacent and could be simplified, which is what this patch does. i.e.
instead of emitting 3 rowsRemoved for 0-3, 4-6, 7-12, now a single
rowsRemoved is emitted for 0-12.
Change-Id: Ia503091cc4928378c88257cd8b431582e9ff454e
Reviewed-by: David Faure <david.faure@kdab.com>
QAbstractItemModel::dataChanged() gained an optional role parameter
with Qt5 which was not filled within QListWidgetItem/QStandardItem
setData() functions
Task-number: QTBUG-55903
Task-number: QTBUG-63766
Change-Id: I4da9346ef8401cc8633dc4b2ea7d00451d1e3942
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Data in item models is most often organized in rows, where each column
contains an attribute of the item represented by the row. Often when
sibling is used, it is to request another piece of data from the same
row. Having a specialized version makes this easier and less awkward
to do, simplifying
auto sibling = index.sibling(index.row(), columnOfInterest);
to
auto sibling = index.siblingAtColumn(columnOfInterest);
For symmetry reasons, siblingAtRow(rowOfInterest) was also added.
Change-Id: Ib203b2cdb16154cbb2680d16fb5c6a7538f33d07
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Remove usage of outdated header.LGPL21 and replace those with proper
one (header.LGPL in src, header.GPL-EXCEPT in tests)
Change-Id: Ia4d1c0d84b77f09787fe7c30670747a1fe2aff29
Reviewed-by: Liang Qi <liang.qi@qt.io>
Move the modeltest autotest in the right place, and fix the
other autotests that were using it to use the version now in QtTestLib.
Change-Id: Ic6838945f616d580f357c872ce0956c341be3b16
Reviewed-by: David Faure <david.faure@kdab.com>
When implementing a custom model there's the habit, in each and every
function that takes a QModelIndex, to carefully checking the index
passed by the caller. This index is checked for "legality" (*): does the
index belong to this model, is the index pointing to an existing row and
column, and so on. These checks are hand-rolled and, as such, slightly
different and possibly incomplete (i.e. wrong) every time.
What's worse, these checks are implemented via "ordinary" code (if
statements). However, passing an illegal index to a QAIM function is a
precondition violation, and as such does not (and must not) be
checked in ordinary conditions, as it triggers undefined behavior. On
the other hand, while debugging a custom model or a custom hierarchy
of (proxy) models, having such checks in place can be a significant
aid.
Enter checkIndex(): a debugging helper for QAbstractItemModel and its
subclasses. checkIndex() centralizes the checks for legality of a
given index. User code is free to assert on it, or have some other
fallback mechanism in case a check fails.
(*) Using "legality" here instead of "validity" in order to avoid
confusion between QModelIndex::isValid() and what checkIndex() really
does.
[ChangeLog][QtCore][QAbstractItemModel] Added
QAbstractItemModel::checkIndex(), a debugging function for
QAbstractItemModel subclasses.
Change-Id: I1eea0586b1ac3ededdbfbf46759145022dc5ad86
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
When a new source model was set to QSortFilterProxyModel, the model
tried to remap the persistent indexes to the new model which was wrong.
The correct solution is to clear the persistent indexes with
_q_sourceModelDestroyed() since the old source model went away.
Task-number: QTBUG-44962
Change-Id: Id39e9ac83324250e8bfa434aae467a9206d2590e
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The test is removing 2 rows starting at the last row of a model.
As the comment indicates, that's clearly invalid.
Change-Id: I43ef00d602934965b206e2ba591ff8fd0a6ae398
Reviewed-by: David Faure <david.faure@kdab.com>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In data(), index belongs to the proxy, not to the source. It needs
to be mapped back to it first.
Change-Id: Ie5dcbf13166dadf62f3d85b594d3227383132521
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Follow the pattern used to guard Private::sort() calls elsewhere in the
class.
Because QAbstractItemModel::sort() is not called in the unit test, the
content is not sorted after resetting.
[ChangeLog][QtCore][QSortFilterProxyModel] QSortFilterProxyModel
now does not emit an unnecessary layoutChanged() following a model
reset.
Change-Id: I0a36c7fbb172bdd06ecddb489c5595debbef6cb9
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
This method now returns -1 by default, due to commit 6255cb893d
which mistakenly replaced -1 with Qt::IgnoreAction (0x0).
As a result, dropping is forbidden in a number of applications
(I detected this in zanshin).
Change-Id: I4922451216e08d5d3fe36f8ba87364a361b691bf
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This commit fixes two bugs:
1) Two ranges should not be merged if they are of different columns.
The old code would have merged (0,0) with (1, 1). Tranforming a selection
of just two indexes in a rectangle of four indexes.
2) The QItemSelectionRange appended had wrong column and worked only for
indexes of the first column. For example if 'tl' was (0, 1) than br was (0, 1)
so the QItemSelectionRange would have be ((0,1), (0, 1-1)) so ((0,1), (0,0)).
This QItemSelectionRange is invalid because topLeft columns is greater than
bottomRight column. The fix take in consideration the bottomRight column.
Task-number: QTBUG-58871
Change-Id: I591ef0bcc63926f24a7b1ced002af9b7737a4b6e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We can quickly check if the change affects sorting by checking whether
lessThan(N-1, N) and lessThan(N, N+1) are still true. If this is the case
for all changed rows, then we can skip the whole remove+insert+layoutChanged().
Task-number: QTBUG-1548
Change-Id: Ia778b3e8880cc9909eef1f8a016c84235870353d
Reviewed-by: Stephen Kelly <steveire@gmail.com>
If the respective modules aren't available we cannot build the tests
and examples. We drop the qtConfig(opengl) requirement for the opengl
examples as
a, we would need to make the QtGui configuration available for that to
work, and
b, we should not add too much detail to the tests and examples build
configurations. Checking each test and example for every feature it
uses would be too much.
Task-number: QTBUG-57255
Change-Id: Ifb043c81ec9e5c487765297bd65704812cd281fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
CustomTextWidgetIface marked its text() method as an override;
DropOnOddRows marked its canDropMimeData() as an override; each
neglected some other methods that are overrides. Convert
Q_DECL_OVERRIDE to the keyword in affected classes, to match.
Change-Id: I78b38e20a81e3e6aab282a1cb3d70cdf8a5f4135
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
You can now use the recursiveFiltering property to recurse into
children to find potential matching children to filter in.
Change-Id: I411a2fb29489fd56b9c881b3e6b8d1860cce630c
Reviewed-by: Stephen Kelly <steveire@gmail.com>
tst_qsortfilterproxymodel.cpp:3997:14: warning: 'data' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qsortfilterproxymodel.cpp:4004:9: warning: 'rowCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
accessiblewidgets.h:101:11: warning: 'interface_cast' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
accessiblewidgets.h:115:13: warning: 'textBeforeOffset' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
accessiblewidgets.h:121:13: warning: 'textAtOffset' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
Change-Id: I75ba00a0109ff25a2a22554980b8e541e661f806
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Callers can persist a QModelIndex which was not persisted before in a
slot connected to the signal, and such a persisted index must be updated
in the course of the layoutChange.
Store the indexes to persist after emitting the signal.
Task-number: QTBUG-32981
Change-Id: Ibee4c0d84817d72603a03fe5b22fdeefeac0695e
Reviewed-by: David Faure <david.faure@kdab.com>
Similar to the fix in the parent commit, incorrect updating of the
internal data structures during layout changes can lead to dangling
pointers being dereferenced later. Moves are treated as layoutChanges
by this proxy by forwarding to the appropriate method. However, data is
incorrectly cleared prior to that forwarding. Remove that, and let the
layoutChange handling take appropriate action.
Change-Id: Iee951e37152328a4e6a5fb8e5385c32a2fe4c0bd
Reviewed-by: David Faure <david.faure@kdab.com>
In sourceLayoutAboutToBeChanged the source model update is ignored if
the affected parents are filtered out anyway. The same logic is
attempted in the sourceLayoutChanged slot, but there the early-return
logic is applied too late - the mapping is cleared before performing the
early-return. Because pointers into the mapping are used in the
internalPointer of QModelIndexes in this class, persistent indexes used
later will segfault when attempting to dereference it.
Additionally, if a parent becomes invalid as a result of the
layoutChange, it would be filtered out by the condition in the loop,
resulting in a different result in the comparison of emptiness of the
parents container.
Fix that by persisting the parent's container, and performing the test
for early-return before clearing the mapping.
Task-number: QTBUG-47711
Task-number: QTBUG-32981
Change-Id: If45e8a1c97d39454160f52041bc9ae7e337dce97
Reviewed-by: David Faure <david.faure@kdab.com>
Simply allocate objects on the stack instead of the heap.
Change-Id: Ic047d78e49668878821cce1c8ab599a8551b6476
Reviewed-by: David Faure <david.faure@kdab.com>
In QStringListModel, the display and the edit roles are synonyms,
so when one is changed, the other changes with it. However, in
setData() we only emitted a vector with just the role that was
passed in by the user.
Fix by always passing both roles, regardless of which one was used
to set the data.
Change-Id: I498e7cb33796fae266901817b01ad85d861d4bb4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
