Before running tests that depend on QWindow::requestActivate
Gets rid of several Wayland platform checks in tst_QWindow.
Change-Id: I7a5e029044a968dfcf87ecbb5105c01d52852d35
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
And make it easier to fix if platformName == wayland-egl etc.
Change-Id: Ia2d62ba003796e08f3e8a5bbfd0c3fd9d185e4e0
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
By using qWaitForWindowExposed instead of qWaitForWindowActivated.
Task-number: QTBUG-66824
Change-Id: Idf604157070731d9c92ccf64d8349c8571960b7c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The test actually passes, so there's no need to skip it.
Task-number: QTBUG-66824
Change-Id: Id091776ff7ca7637fdcf0e0ced833982b5788d92
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
After a37785ec76 went in, it become
apparent that multi mouse button state handling in qtestlib is
non-existent, for details see QTBUG-64030 and QTBUG-63786. What
happened behind the scenes often was not what one would expect based
on the provided QTest::mouse* input sequence - events went missing,
incorrect events were generated, each subsequent test function
started with a state set from the function that run earlier. It is
easy to see how a minor change in one test could easily affect outcome
of other tests.
With a37785ec76, Qt platform plugins
are now responsible for sending explicit mouse button type and state
information; qtestlib should take full responsibility now as well.
But using the new API from a37785ec7 alone in qtestlib is not sufficient.
We need to reset mouse state between each new test function run (we do
this at function scope as that fits with the current qtestlib API user
expectations). This patch implements the necessary reseting logic.
Updated tst_qwindow.cpp::generatedMouseMove() to use QTest::mouse* APIs.
That test requires pressing multiple buttons, it was not possible with
QTest::mouse* APIs before this patch.
Added an auto test for multiple mouse button pressing/release in
tests/auto/testlib/selftests/mouse/. And few other tests which are
currently QSKIP-ed, but should be considered when re-designing qtestlib
APIs.
Task-number: QTBUG-64030
Change-Id: I39fdcbc73a467a7463ce2aed622bf22484095635
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Windows sends a mouse move with no buttons pressed to signal "Enter"
when a window is shown over the cursor. Discard the event and only
use it for generating QEvent::Enter as not to confuse tests.
This is preparing for the use of the new QPA API for mouse events.
Change-Id: I3eb7f3dad82d27d0b425c7eaf34b1eee11592074
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
We have the ability to blacklist tests for CI runs now.
Task-number: QTBUG-35109
Change-Id: I8590e83faba764dce2d52e8c62e2e2c63f7bf219
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
... that become apparent after switching qtestlib to use enhanced mouse
event (a37785ec76). With the old code path,
where QGuiApplication was deducing event type it would deduce mouse release
event even when there wasn't one. The new code path doesn't do that, which
revealed an obscure problem when mixing QTest::mouse* APIs (where QWindow
overload goes through QWindowSystemInterface API and QWidget overload goes
through QApplication::notify() and sets mouse_buttons from there). What
happened in this specific test case "./tst_qtreeview selection statusTip" was:
// tst_QTreeView::selection sets mouse_buttons = Qt::LeftButton from QApplication::notify
QTest::mousePress(widget, Qt::LeftButton, ..)
// tst_QTreeView::statusTip
QTest::mouseMove(window, )
The old code path sees that position and state has changed, creates a fake
mouse event, which gets deduced as mouse release even if there wasn't one.
And by luck this happened to set mouse_buttons=Qt::NoButton. So when we use
mouse_buttons later to create QMouseEvent everything works as expected. With
the enhanced mouse we don't clear the pressed button from mouse_buttons (set
in tst_QTreeView::selection) as this is done only from press/release events,
then pass it to QMouseEvent and later because of that QApplicationPrivate::
pickMouseReceiver() returns nullptr.
The fix here is to use e->buttons when constructing QMouseEvent, instead of
relying on mouse_buttons which gets changed from various places and has other
issues that can not be solved without invalidating the current documentation
of QGuiApplication::mouseButtons() (e.g QTBUG-33161). Tests and any Qt code
in general should avoid using the fragile QGuiApplication::mouseButtons() API.
This patch does not affect the old code path (it continues working as before)
and fixes the issue described above for the enhanced mouse API. The enhanced
mouse API actually is better in a way that it does not get affected by button
state from test functions that run earlier, as opposed to the old code path
where every subsequent test function uses mouse_buttons in whatever state it
was left by the test functions that run earlier.
Not relying on mouse_buttons when creating QMouseEvent helped also to discover
other logic error. This caused an in incorrect button state for a mouse move
event that is generated for a release event that simultaneously changes a mouse
position.
Task-number: QTBUG-64043
Change-Id: I6ad8e49d8437ab0858180c2d0d45694f3b3c2d60
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 542e11ab2b)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Swapping from RHEL 7.2 to 7.4 produces new autotest failures.
Task-number: QTBUG-63433
Change-Id: I3e59aa73b5874cfec06e166f521e06b0c7829743
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Although the window is refused input for the most part from the system,
it does not act like that it is blocked by the application modal dialog.
This ensures that it is the case and prevents things like being able to
double click on the title bar to maximize the window on Windows.
Task-number: QTBUG-49102
Change-Id: If1582819b90cb2ec9d891f664da24f13bfec7103
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
These tests need fixing, but they are already partially blacklisted
and need investigation once the switch is completed.
Task-number: QTQAINFRA-1292
Task-number: QTQAINFRA-1355
Task-number: QTQAINFRA-1362
Change-Id: Ic50d0c4a01ee7e72be1129d418eff244ba783185
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fixes flakiness where we enter and exit window states too fast on macOS,
while also removing 2 second waits in the positioning tests that were
slowing things down needlessly.
Change-Id: Ia4ee4d4812474c520fdd3f76b047f4eabe1a8220
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The tests uses QWindow::requestActivate() to verify that a window does
not become active when a modal dialog is running, but on macOS we have
no guards for this, so the test can potentially fail.
In addition, due to a bug in QCocoaEventDispatcher, we end up waiting
5 seconds for that failure to manifest.
Task-number: QTBUG-61965
Task-number: QTBUG-61964
Change-Id: I2f1b62d953e9b6dabf2df0c3023564f27919c498
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Like other QWindow properties we can just store it, and the platform
window should pick it up on creation like other properties.
[ChangeLog][QtGui][QWindow] setMask() no longer requires the window
to be created to have an effect; it can be set at any time.
Change-Id: I55b616363801b770bd61bda5325b443013b99866
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Changed testing of focus of modal dialogs to match behavior on offscreen
and minimal platforms.
Change-Id: Ife3ea41b4b78df2e64c8d8e740332914b1e5a67c
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
We can defer the creation until the window is shown.
Change-Id: I3d5b45ae59ee0925996cf12cd46dd574c8c6ef95
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Analogous to QWidget::setAttribute(), introduce an API to easily
enable/disable a single window flag without having to resort to
w.setFlags(w.flags() | Qt::NewFlag).
Change-Id: Ib0f7254a34c8d884cdec181c41b99e5ef035d954
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Same behavior as QWidget, and allows platform plugins to maintain order of
native windows based on the QWindow hierarchy, instead of having to manually
keep track of window levels.
Change-Id: Iacc7e9ee2527f0737c9da6debc7cec101064f782
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>