When errors are detected synchronously in _q_startOperation,
they were not reported. This is because unlike the generic
QNetworkReplyImpl the function is called directly rather than
using a queued connection.
In order to report errors, use the _q_error and _q_finished slots
so that signals are emitted after returning to the event loop
i.e. after the application had a chance to connect the QNetworkReply
Change-Id: I8a7bbe79a934f4634fb4e0572ebb5479dfc5f489
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Change-Id: I7d8ea41299408377042a9f0d0a672e1a6fb57e7d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
If background requests are not allowed, don't even attempt to start
the network session, just fail the request immediately.
After this change, a QNAM with mixed requests queued should behave
as follows when background requests are disabled:
- background requests at head of the queue fail
- first foreground request starts the session and succeeds
- remaining background requests fail
- remaining foreground requests succeed
If policy is changed on the fly, then running background requests
are not aborted. However queued background requests won't be started.
Change-Id: Ic9aba1eb59ca41b166a08d2ed09418e1b6af6b60
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
This allows the system to publish usage restrictions to applications
related to the network in use.
Currently there is only one restriction defined:
NoBackgroundTrafficPolicy, which means that non user initiated traffic
should be avoided (e.g. background downloads).
For example this policy could be applied to save battery or data transfer
charges.
Change-Id: I49e26c0f3650d2b92f4ec51981aae9435b717b49
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Switched the error code.
Republish the error string from the bearer plugin if possible.
Change-Id: I9e4ac7a9914fbf2e87fe8fd3a5175deda6d933d2
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
This error will be used when background network requests are not allowed
according to the current policy of the bearer plugin.
For example, to save power when battery is low on a portable device.
Change-Id: I866e115f8fdd046134da99ea895b7c1df0375f26
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
This is to replace the UnknownNetworkError which occurs when the
internal QNetworkSession fails to start (e.g. no usable WLAN available)
Change-Id: I2b14577c22e0acf8ff07be7e932f0dfe9ac89c33
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Set the QNetworkSession attribute to match the QNetworkRequest that
triggered it.
Currently if there are a mix of normal and background requests queued
and background connections are not allowed by policy:
- background requests at the head of the queue should fail
- first foreground request should successfully start a connection
- remaining requests succeed regardless of background attribute
Change-Id: If0e3ec0b8a5096e3d7cd6df85884c6f53172d233
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
This is so that the ConnectInBackground flag can be set on the
QNetworkSession internal to QNAM according to pending requests.
Change-Id: If0cc62f5117ed8febbbda7b7f6de62b11b274258
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
- The crash on XCB can no longer be reproduced.
- Use QFINDTESTDATA instead of SRCDIR defines.
- Remove Windows CE specific profile section.
Task-number: QTBUG-20756
Change-Id: I6077b3a0daacb15ab440a90c7bda247aa3756fa5
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
0xfdef-0xfdd0 is definitely 31 and not 15 :)
also fix all copy-pastes of this code (greping for '0xfdd0' helps ;)
Change-Id: I8f3bd4fd9d85f9de066f0f5df378b9188c12bd48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
The change discussed in the comment doesn't have to be done in a major
release if it isn't source-incompatible.
Task-number: QTBUG-25103
Change-Id: I50036ab13611871ede01b7b7a17ce4c325476b00
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Crash on XCB can no longer be reproduced.
Task-number: QTBUG-20756
Change-Id: I057231a397573f2a28a1325c6d6f728735ebbee6
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Neither of these comments will be actioned for Qt 5: the first because
would be source-incompatible with Qt 4, the second becuase it would be
a significant behavioural change.
Task-number: QTBUG-25090
Change-Id: I5f8f7cce3007c3188b2f0184138fa8e55a165654
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Currently, for host builds, pkg-config usage is autodetected based
on it's availability in the mkspec or the PATH. For xcompile builds,
pkg-config is disabled unless -force-pkg-config is passed.
-force-pkg-config is poorly named since it doesn't reflect the fact
that it applies only to xplatform builds. It is in fact the only way to
enable pkg-config in xcompile builds. And when passed, it doesn't actually
force anything since all it does is check env variables. To add to the
confusion, it prints a warning even if the env variables are setup correctly.
This patch remedies the situation. It adds (-no)-pkg-config. The flag works
for both host and xcompile builds.
By default, the value is 'auto'. In this mode, it will try try to detect pkg-config
from the path. If found, it will be used. For xcompiled builds, we use some heuristics
to determine if the pkg-config is actually usable:
1. if -sysroot is not set and the environment variables PKG_CONFIG_LIBDIR or
PKG_CONFIG_SYSROOT_DIR are not set, we disable pkg-config.
2. if -sysroot is set, then we setup PKG_CONFIG_LIBDIR and PKG_CONFIG_SYSROOT_DIR
automatically (provided $SYSROOT/usr/lib/pkgconfig exists).
If the value is 'yes', configure will error if it's heuristics fail to detect a usable
pkg-config.
If the value is 'no', pkg-config usage is disabled.
If the value is 'force', configure will skip it's heuristics and use pkg-config anyway.
This mode is useful, for example, when compiling for 32-bit on 64-bit systems.
This change also removes references to PKG_CONFIG_SYSROOT (PKG_CONFIG_SYSROOT_DIR
is the correct environment variable).
Change-Id: I07fc8d48603c65a60de0336fc6276e90fcb41430
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Apply the state in QWidgetWindow and send an event to
the widget unless the code is triggered by
QWidget::setWindowState().
Change-Id: Ibf2f4e730384e41636841b9216eecfdff35b7bcb
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
- Avoid sending Window State change events from
WM_STATE/NET_WM_STATE changes irrelevant to Qt::WindowState.
- Introduce QFlags for the NetWmState getter and setter to
avoid passing QVector<> around.
Change-Id: I74730928c7fffca0fa1cab3b90ded90b06304c06
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
If a modal top-level widget has WA_DontShowOnScreen set, we need to call
QGuiApplicationPrivate::showModalWindow() and hideModalWindow()
ourselves, since we will not be calling QWindow::setVisible() (which
would normally do the call for us).
Change-Id: I1b22dd177c5956a2290f3ee031c95ab50d88f153
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This tests that modalWindow() returns the expected value and that
QEvent::WindowBlocked and QEvent::WindowUnblocked are sent correctly
when modal windows are hidden and shown.
Change-Id: I872f35e0240c928566ab35fa5764fad6cfda6db6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QWindow already has windowModality() and setWindowModality() as part of
its API from commit 516f4e283b. Platform
plugins can use this already to setup modality hints on windows that
they create, but it's not enough to implement modality fully.
QGuiApplication gets a modalWindow() static method, which is similar to
QApplication::activeModalWidget() in that it returns the last modal
window to be shown.
The modal window "stack" moves from QApplicationPrivate to
QGuiApplicationPrivate. The enterModal*() and leaveModal*() functions in
QApplicationPrivate are removed and replaced by
QGuiApplicationPrivate::showModalWindow() and hideModalWindow(), which
are called by QWindow::setVisible() just before calling
QPlatformWindow::setVisible().
The virtual QGuiApplicationPrivate::isWindowBlocked() will tell us if a
window is blocked by a modal window (and tell which modal window for any
interested callers). The default implementation works on the QWindow
level. QApplicationPrivate reimplements isWindowBlocked() and adds popup
and WA_GroupLeader support.
QGuiApplication uses the state set from isWindowBlocked() to block
user-input events: mouse press, mouse move, mouse release, wheel, key
presses, key releases, enter/leave events, close events, and touch
begin, update, and end events.
Note also that the modality helper functions in QtWidgets and
QApplicationPrivate are left in place and working as they always have.
The behavior of QWidget in the presence of modal windows/dialogs should
not change.
Change-Id: I2c89e6026d40160387787a6e009ae1fdc12dfd69
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This was accidentally removed in the big change regarding searching in
the internal QDoc tree.
Change-Id: I2496d7497d239f1ec5fbd01be6a918c1ef29fc95
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Now the default for a QML property is writable. If qdoc
can't detect the actual read-only status, writable is
assumed. There were some cases where qdoc could not
determine the actual read-only/writable status for a
QML property. In these cases, qdoc reported read-only
because the default was read-only, which was not optimal.
Change-Id: I55aeb2bedcde92a414f4d48a8d995e5e9dbca5da
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
by reordering and regrouping conditions so that they lead to result earlier
in most-common usecases (l.letters, spaces and puncts, u.letters, other);
there are no title cased letters in range [0..127] -> use this in isTitleCase();
test for 0xa0 (nbsp) early in isSpace() as it is quite common in HTML, etc.;
add early test to isNumber().
Change-Id: Ib415f34cb1212d9ccf8753de2d1beaece1aa2243
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Windows ships with a minimal set of CA roots.
When using windows API to verify a certificate, it will fetch the
root certificate from windows update (assuming it is part of the
Microsoft trust program).
As we are using openssl, this does not happen transparently.
If SSL errors occur which indicate a broken chain then attempt
to fix it using the windows API before emitting sslErrors.
If the system CA certs are not in use (a CA bundle has been set
on the socket or as the global configuration), then this is skipped.
This is so an application can continue to use its own cert bundle
rather than trusting the system certs.
Key usage is specified, so that windows will return not trusted
status if the root is not suitable for SSL (server auth or
client auth OID).
Testability:
- to test, must delete the CA cert(s) from the "third party
root certification authorities" section of the cert store
using mmc.exe.
- If the workaround of installing the windows XP cert bundle was
performed, then you also need to delete certs from the "trusted
root certification authorities" section.
This is dangerous, be careful not to delete the required
certificates which are documented on MS website
- Naturally, modifying these areas of the cert store requires
elevated privilege.
Task-number: QTBUG-24827
Change-Id: I5cfe71c8a10595731f6bbbbabaaefa3313496654
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removed some MacOS source code files from iOS build. Use unix standard
paths for now (iOS-specific implementation will come later).
Change-Id: I8b2731b431b3a379a1ec4ec07d227e886209e3e9
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Who can say why it was put in QPaintEngineEx's header, but it certainly doesn't
belong there.
Change-Id: Ieb3b977affcf4b240f621d13b72bdc0e8f8138b9
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Initial bits to enable figuring out the EGL display and context.
Change-Id: I4b578e356dceb40b4456f0590d32c8df1f51fa53
Reviewed-by: Andy Nichols <andy.nichols@nokia.com>
KMS plugin deals with FBO IDs not equal to zero (the default FBO),
so return the correct ID.
Change-Id: I904fc0b8d732f856b4526bd7f73cc48c358c8441
Reviewed-by: Andy Nichols <andy.nichols@nokia.com>
Threaded applications like qmlscene could not bind the EGL context if
the context is already bound in the other thread.
Change-Id: Ia75ef9e76ebff48aa2c9b348101ab2f388e18c5e
Reviewed-by: Andy Nichols <andy.nichols@nokia.com>
Sync up the KMS QPA plugin with the plugin system changes.
Change-Id: Ifaa8be6f11aeb93acc63643c62ca15db4e9bc38f
Reviewed-by: Andy Nichols <andy.nichols@nokia.com>
The naming convention for these libraries says that libGLES_CM is to be
used when EGL is included while libGLESv1_CM should be used when EGL is
not included. Since we have a seperate variable for libEGL, it
makes sense to have this variable represent the non-EGL version of the
library.
Change-Id: I9147c116da7be4a296a0ebeac39762b46725f10e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The comment relates to a change that is neither source- nor
binary-incompatible, so the change can be done in any minor release.
Task-number: QTBUG-25117
Change-Id: Ifba3ef53241f9bf2504c573066e4cfa5fbfe679e
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Just like qMalloc/qRealloc/qFree, there is absolutely no reason to wrap these
functions just to avoid an include, except to pay for it with worse runtime
performance.
On OS X, on byte sizes from 50 up to 1000, calling memset directly is 28-15%
faster(!) than adding an additional call to qMemSet. The advantage on sizes
above that is unmeasurable.
For qMemCopy, the benefits are a little more modest: 16-7%.
Change-Id: I98aa92bb765aea0448e3f20af42a039b369af0b3
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: John Brooks <john.brooks@dereferenced.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
There are two problems with the current design:
1. if (hooks) hooks->foo() doesn't work in debug mode when no platform hook
is defined. The problem doesn't arise in release mode because the compiler
optimizes away the if (hooks) into a no-op since hooks is NULL when no
platform hook is defined.
2. Adding a new hook requires changing every platform's hook implementation.
New approach:
1. Define QEglFSHooks as a class with virtual functions. A stub file provides
the default implementation.
2. Platform hooks derive from above class and reimplement whatever is needed.
The filenames and variables have been changed to be more in line with the
Qt style.
Change-Id: I2eaaa5ad7c8b48a06361c4747d4f210c428c983f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The parameter represents an allocation size and unsigned matches the
Q*Data::alloc member it ultimately represents (even if they currently
differ in accounting for the null).
There's still work up for grabs to ensure we avoid integer overflows
when growing.
Change-Id: Ib092fec37ec2ceed37bebfdc52e2de27b336328f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This removes a couple of functions. Two of them are unused and the
last one has its (now) very simple implementation inlined in the
only caller. The last function was called something with spans and
we would like to get away from using the word 'span' since we no
longer uses spans.
Change-Id: Icef95166289d52bd958400cba70daceb6fa75913
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In (SHA) b800d8b94a the span model
was replaced with a plain section model. The code however still has
variables and classes called someting with spans which would be
confusing for possible new readers of the code.
This patch cleans up most of it. It only renames classes,functions
and variables (and not any semantics or the public API).
Change-Id: I6ceb068c7317223f0d8e37f8032197f518d0174c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
That includes non-standard macroses for QtAddOns, e.g. for QtJsonDb addon the
macro looks like QT_BEGIN_NAMESPACE_JSONDB - by default syncqt doesn't
recognize the macro and concantenates it with the next line in the header file,
which breaks forward include generation if that next line is the class
definition.
Change-Id: Ia269f8a091113e4951d6a2615ef392b21bd5e3a3
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Add support for automatically searching the Mac System Preferences
for proxy server username/password. If a user has put credentials
in the SystemPreferences->Network->Interface->Proxies area, we
will now look in the KeyChain for those files. This will
automatically pop up a Permissions dialog from the OS if valid
credentials were found which match the server we are trying to
access.
Task-Number: QTBUG-22033
Change-Id: Ic7952afab4d16a65a87bb2f97a928c1c91167fe7
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Adds support for fetching and parsing Proxy Auto Config files if one
is specified in the Mac System Preferences
Task-Number: QTBUG-2069
Task-Number: QTIFW-28
Change-Id: I91feb999222187e7467f2c41383904cf0cff8633
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
